version control from environment variable
20 years, 5 months
robert delius royar
robert delius royar
In the file SRC/lisp/startup.el lines 549-557 the following code sets
version-control based on the VERSION_CONTROL environment setting:
549-
550- (setq command-line-default-directory default-directory)
551-
552- ;; See if we should import version-control from the environment
variable.
553: (let ((vc (getenv "VERSION_CONTROL")))
554- (cond ((eq vc nil)) ;don't do anything if not set
555- ((or (string= vc "t")
556- (string= vc "numbered"))
557- (setq version-control t))
The problem with this comes when running 'make install' and the system goes
through a late iteration of dumping a working XEmacs. The program is in
batch mode and does not expect to answer user input. But version-control
expects to find out whether to delete excess copies of the generated
autoload files. This triggers an assertion.
Shouldn't there also be a test for whether we are in batch mode? Or perhaps
batchmode should deal with user input prompting. Does any request that
leads to a prompt with a needed answer cause batch mode to fail with an
assertion?
--
Dr. Robert Delius Royar Associate Professor of English
Morehead State University Morehead, Kentucky
- 2 participants
- 3 comments
Men this product will change your life arhs spjvinydqkbekvp
20 years, 5 months
Marcelino Gray
Marcelino Gray
- 1 participants
- 0 comments
RE: [Bug: 21.4.13] Cannot open some files
20 years, 5 months
Roland Frank
Roland Frank
Der Bug Team!
I experiemented a bit with my problem. If something is signalled the
condition-case in function find-file-noselect will kill the buffer and
signal the error again (I think otherwise the signal would be lost). The
cause of my problem was a function, called by after-find-file (so I guess
the function is in the find-file hooks).
I put a new condition-case around the call of after-find-file, which simply
write a string to an buffer to report the error. By this I prevent a
buffer-kill. I know this can not be the solution, but I am not shure what is
the right one:
1) Move the after-find-file behind the condition-case
2) Selectively kill the newly opened buffer (either by signal or by
a variable, which is set if I reach after-find-file)
3) Do the additional condition-case with an appropiate reaction
BTW, if I uncomment the condition-case I get the following backtrace,
showing the problem is near the semantic bovinator:
Signaling: (args-out-of-range #<buffer "Makefile"> 3883 3892)
semantic-make-overlay(3883 3892)
semantic-show-unmatched-syntax(((semantic-list 3883 . 3892) (punctuation
3882 . 3883) (symbol 3881 . 3882) (semantic-list 3872 . 3881) (punctuation
3871 . 3872) (symbol 3862 . 3870)))
semantic-show-unmatched-syntax-mode-setup()
semantic-show-unmatched-syntax-mode()
run-hooks(semantic-show-unmatched-syntax-mode)
semantic-new-buffer-fcn()
semantic-post-change-major-mode-function()
run-hooks(semantic-post-change-major-mode-function)
after-find-file(nil t)
(if rawfile nil (after-find-file error (not nowarn)) (setq buf
(current-buffer)))
(progn (set-buffer-major-mode buf) (set-buffer buf) (erase-buffer)
(condition-case nil (if rawfile ... ...) (file-error ... ...)) (unless
buffer-file-truename (setq buffer-file-truename truename)) (setq
buffer-file-number number) (and find-file-use-truenames (setq
buffer-file-name ...)) (setq default-directory (file-name-directory
buffer-file-name)) (and (not ...) (progn ... ...)) (if rawfile nil
(after-find-file error ...) (setq buf ...)))
(save-excursion (setq buf (create-file-buffer filename)) (progn
(set-buffer-major-mode buf) (set-buffer buf) (erase-buffer) (condition-case
nil ... ...) (unless buffer-file-truename ...) (setq buffer-file-number
number) (and find-file-use-truenames ...) (setq default-directory ...) (and
... ...) (if rawfile nil ... ...)))
(if buf (or nowarn (verify-visited-file-modtime buf) (cond ... ... ...))
(save-excursion (setq buf ...) (progn ... ... ... ... ... ... ... ... ...
...)))
(let* ((buf ...) (truename ...) (number ...) (error nil)) (when (and buf
... ...) (save-excursion ... ...)) (if buf (or nowarn ... ...)
(save-excursion ... ...)) buf)
(if (file-directory-p filename) (if (and ... find-file-run-dired)
(dired-noselect ...) (error "%s is a directory" filename)) (let* (... ...
... ...) (when ... ...) (if buf ... ...) buf))
find-file-noselect("D:\\Eigene Dateien\\code\\hcs12\\SafeRdw\\Makefile")
default-dir-real-find-file("D:\\Eigene
Dateien\\code\\hcs12\\SafeRdw\\Makefile")
#<compiled-function (file &optional coding-system) "...(4)" [file
default-dir-real-find-file] 2 "Edit file FILENAME.\nSwitch to a buffer
visiting file FILENAME,\ncreating one if none already exists.\nUnder
XEmacs/Mule, optional second argument specifies the\ncoding system to use
when decoding the file. Interactively,\nwith a prefix argument, you will be
prompted for the coding system.\n\nNote: This function has been modified to
work with default-dir." (list (expand-file-name ...))>("D:\\Eigene
Dateien\\code\\hcs12\\SafeRdw\\Makefile")
call-interactively(find-file)
#<compiled-function nil "...(4)" [toolbar-open-function
call-interactively] 2 nil nil>()
call-interactively(toolbar-open)
recursive-edit()
byte-code("..." [print-escape-newlines print-length debugger-buffer
debugger-value standard-output debugger-args pop-to-buffer erase-buffer t 50
backtrace debugger-mode re-search-forward "\n[* ] debug(" 1
debugger-reenable (lambda debug) "Entering:\n" debug backtrace-debug 3
delete-char ?* 0 exit "Return value: " prin1 ?\n ?\ error "Signaling: "
"Beginning evaluation of function call form:\n" nil message ""
recursive-edit buffer-read-only inhibit-trace] 3)
debug(error (args-out-of-range #<killed buffer> 3883 3892))
signal(args-out-of-range (#<killed buffer> 3883 3892))
(condition-case data (progn (set-buffer-major-mode buf) (set-buffer buf)
(erase-buffer) (condition-case nil ... ...) (unless buffer-file-truename
...) (setq buffer-file-number number) (and find-file-use-truenames ...)
(setq default-directory ...) (and ... ...) (if rawfile nil ... ...)) (t
(kill-buffer buf) (signal ... ...)))
(save-excursion (setq buf (create-file-buffer filename)) (condition-case
data (progn ... ... ... ... ... ... ... ... ... ...) (t ... ...)))
(if buf (or nowarn (verify-visited-file-modtime buf) (cond ... ... ...))
(save-excursion (setq buf ...) (condition-case data ... ...)))
(let* ((buf ...) (truename ...) (number ...) (error nil)) (when (and buf
... ...) (save-excursion ... ...)) (if buf (or nowarn ... ...)
(save-excursion ... ...)) buf)
(if (file-directory-p filename) (if (and ... find-file-run-dired)
(dired-noselect ...) (error "%s is a directory" filename)) (let* (... ...
... ...) (when ... ...) (if buf ... ...) buf))
find-file-noselect("D:\\Eigene Dateien\\code\\hcs12\\SafeRdw\\Makefile")
default-dir-real-find-file("D:\\Eigene
Dateien\\code\\hcs12\\SafeRdw\\Makefile")
#<compiled-function (file &optional coding-system) "...(4)" [file
default-dir-real-find-file] 2 "Edit file FILENAME.\nSwitch to a buffer
visiting file FILENAME,\ncreating one if none already exists.\nUnder
XEmacs/Mule, optional second argument specifies the\ncoding system to use
when decoding the file. Interactively,\nwith a prefix argument, you will be
prompted for the coding system.\n\nNote: This function has been modified to
work with default-dir." (list (expand-file-name ...))>("D:\\Eigene
Dateien\\code\\hcs12\\SafeRdw\\Makefile")
call-interactively(find-file)
#<compiled-function nil "...(4)" [toolbar-open-function
call-interactively] 2 nil nil>()
call-interactively(toolbar-open)
recursive-edit()
byte-code("..." [print-escape-newlines print-length debugger-buffer
debugger-value standard-output debugger-args pop-to-buffer erase-buffer t 50
backtrace debugger-mode re-search-forward "\n[* ] debug(" 1
debugger-reenable (lambda debug) "Entering:\n" debug backtrace-debug 3
delete-char ?* 0 exit "Return value: " prin1 ?\n ?\ error "Signaling: "
"Beginning evaluation of function call form:\n" nil message ""
recursive-edit buffer-read-only inhibit-trace] 3)
debug(error (args-out-of-range #<killed buffer> 3883 3892))
semantic-make-overlay(3883 3892)
semantic-show-unmatched-syntax(((semantic-list 3883 . 3892) (punctuation
3882 . 3883) (symbol 3881 . 3882) (semantic-list 3872 . 3881) (punctuation
3871 . 3872) (symbol 3862 . 3870)))
semantic-show-unmatched-syntax-mode-setup()
semantic-show-unmatched-syntax-mode()
run-hooks(semantic-show-unmatched-syntax-mode)
semantic-new-buffer-fcn()
semantic-post-change-major-mode-function()
run-hooks(semantic-post-change-major-mode-function)
after-find-file(nil t)
(if rawfile nil (after-find-file error (not nowarn)) (setq buf
(current-buffer)))
(progn (set-buffer-major-mode buf) (set-buffer buf) (erase-buffer)
(condition-case nil (if rawfile ... ...) (file-error ... ...)) (unless
buffer-file-truename (setq buffer-file-truename truename)) (setq
buffer-file-number number) (and find-file-use-truenames (setq
buffer-file-name ...)) (setq default-directory (file-name-directory
buffer-file-name)) (and (not ...) (progn ... ...)) (if rawfile nil
(after-find-file error ...) (setq buf ...)))
(save-excursion (setq buf (create-file-buffer filename)) (progn
(set-buffer-major-mode buf) (set-buffer buf) (erase-buffer) (condition-case
nil ... ...) (unless buffer-file-truename ...) (setq buffer-file-number
number) (and find-file-use-truenames ...) (setq default-directory ...) (and
... ...) (if rawfile nil ... ...)))
(if buf (or nowarn (verify-visited-file-modtime buf) (cond ... ... ...))
(save-excursion (setq buf ...) (progn ... ... ... ... ... ... ... ... ...
...)))
(let* ((buf ...) (truename ...) (number ...) (error nil)) (when (and buf
... ...) (save-excursion ... ...)) (if buf (or nowarn ... ...)
(save-excursion ... ...)) buf)
(if (file-directory-p filename) (if (and ... find-file-run-dired)
(dired-noselect ...) (error "%s is a directory" filename)) (let* (... ...
... ...) (when ... ...) (if buf ... ...) buf))
find-file-noselect("D:\\Eigene Dateien\\code\\hcs12\\SafeRdw\\Makefile")
default-dir-real-find-file("D:\\Eigene
Dateien\\code\\hcs12\\SafeRdw\\Makefile")
#<compiled-function (file &optional coding-system) "...(4)" [file
default-dir-real-find-file] 2 "Edit file FILENAME.\nSwitch to a buffer
visiting file FILENAME,\ncreating one if none already exists.\nUnder
XEmacs/Mule, optional second argument specifies the\ncoding system to use
when decoding the file. Interactively,\nwith a prefix argument, you will be
prompted for the coding system.\n\nNote: This function has been modified to
work with default-dir." (list (expand-file-name ...))>("D:\\Eigene
Dateien\\code\\hcs12\\SafeRdw\\Makefile")
call-interactively(find-file)
#<compiled-function nil "...(4)" [toolbar-open-function
call-interactively] 2 nil nil>()
call-interactively(toolbar-open)
recursive-edit()
byte-code("..." [print-escape-newlines print-length debugger-buffer
debugger-value standard-output debugger-args pop-to-buffer erase-buffer t 50
backtrace debugger-mode re-search-forward "\n[* ] debug(" 1
debugger-reenable (lambda debug) "Entering:\n" debug backtrace-debug 3
delete-char ?* 0 exit "Return value: " prin1 ?\n ?\ error "Signaling: "
"Beginning evaluation of function call form:\n" nil message ""
recursive-edit buffer-read-only inhibit-trace] 3)
debug(error (args-out-of-range #<killed buffer> 3883 3892))
signal(args-out-of-range (#<killed buffer> 3883 3892))
(condition-case data (progn (set-buffer-major-mode buf) (set-buffer buf)
(erase-buffer) (condition-case nil ... ...) (unless buffer-file-truename
...) (setq buffer-file-number number) (and find-file-use-truenames ...)
(setq default-directory ...) (and ... ...) (if rawfile nil ... ...)) (t
(kill-buffer buf) (signal ... ...)))
(save-excursion (setq buf (create-file-buffer filename)) (condition-case
data (progn ... ... ... ... ... ... ... ... ... ...) (t ... ...)))
(if buf (or nowarn (verify-visited-file-modtime buf) (cond ... ... ...))
(save-excursion (setq buf ...) (condition-case data ... ...)))
(let* ((buf ...) (truename ...) (number ...) (error nil)) (when (and buf
... ...) (save-excursion ... ...)) (if buf (or nowarn ... ...)
(save-excursion ... ...)) buf)
(if (file-directory-p filename) (if (and ... find-file-run-dired)
(dired-noselect ...) (error "%s is a directory" filename)) (let* (... ...
... ...) (when ... ...) (if buf ... ...) buf))
find-file-noselect("D:\\Eigene Dateien\\code\\hcs12\\SafeRdw\\Makefile")
default-dir-real-find-file("D:\\Eigene
Dateien\\code\\hcs12\\SafeRdw\\Makefile")
#<compiled-function (file &optional coding-system) "...(4)" [file
default-dir-real-find-file] 2 "Edit file FILENAME.\nSwitch to a buffer
visiting file FILENAME,\ncreating one if none already exists.\nUnder
XEmacs/Mule, optional second argument specifies the\ncoding system to use
when decoding the file. Interactively,\nwith a prefix argument, you will be
prompted for the coding system.\n\nNote: This function has been modified to
work with default-dir." (list (expand-file-name ...))>("D:\\Eigene
Dateien\\code\\hcs12\\SafeRdw\\Makefile")
call-interactively(find-file)
#<compiled-function nil "...(4)" [toolbar-open-function
call-interactively] 2 nil nil>()
call-interactively(toolbar-open)
> -----Original Message-----
> From: Roland Frank
> Sent: Donnerstag, 20. November 2003 10:47
> To: 'XEmacs Beta'
> Subject: [Bug: 21.4.13] Cannot open some files
>
> Dear Bug Team!
>
> I run from time to time into trouble opening some files. I can not
> figure out why it works for a while and then stops to work (means I
> can edit a file and safe and the other day I cannot open it again).
>
> I put on debug-on-error and got the following output:
>
> Signaling: (args-out-of-range #<killed buffer> 25497 25504)
> signal(args-out-of-range (#<killed buffer> 25497 25504))
> byte-code("..." [buf data kill-buffer signal] 3)
> find-file-noselect("D:\\Eigene
> Dateien\\code\\hcs12\\SafeRdw\\Sources\\isr.c")
> default-dir-real-find-file("D:\\Eigene
> Dateien\\code\\hcs12\\SafeRdw\\Sources\\isr.c")
> #<compiled-function (file &optional coding-system) "...(4)" [file
> default-dir-real-find-file] 2 "Edit file FILENAME.\nSwitch to a buffer
> visiting file FILENAME,\ncreating one if none already exists.\nUnder
> XEmacs/Mule, optional second argument specifies the\ncoding system to use
> when decoding the file. Interactively,\nwith a prefix argument, you will
> be prompted for the coding system.\n\nNote: This function has been
> modified to work with default-dir." (list (expand-file-name
> ...))>("D:\\Eigene Dateien\\code\\hcs12\\SafeRdw\\Sources\\isr.c")
> call-interactively(find-file)
> #<compiled-function nil "...(4)" [toolbar-open-function
> call-interactively] 2 nil nil>()
> call-interactively(toolbar-open)
>
> The same problem occured with opening recent-files, where he
> complained about a gui item with following debug output:
>
> Signaling: (syntax-error "GUI item produces too long displayable string"
> "%_a
> ~\\Austausch\\docu\\ebooks\\Prozessor\\MC\\Motorola\\HCS12\\examples\\OS -
> A Real Time Operationg System for The MC68HC11\\Os\\semantic.cache")
> recursive-edit()
> byte-code("..." [print-escape-newlines print-length debugger-buffer
> debugger-value standard-output debugger-args pop-to-buffer erase-buffer t
> 50 backtrace debugger-mode re-search-forward "\n[* ] debug(" 1
> debugger-reenable (lambda debug) "Entering:\n" debug backtrace-debug 3
> delete-char ?* 0 exit "Return value: " prin1 ?\n ?\ error "Signaling: "
> "Beginning evaluation of function call form:\n" nil message ""
> recursive-edit buffer-read-only inhibit-trace] 3)
> debug(error (args-out-of-range #<killed buffer> 25497 25504))
> signal(args-out-of-range (#<killed buffer> 25497 25504))
> byte-code("..." [buf data kill-buffer signal] 3)
> find-file-noselect("D:\\Eigene
> Dateien\\code\\hcs12\\SafeRdw\\Sources\\isr.c")
> default-dir-real-find-file("D:\\Eigene
> Dateien\\code\\hcs12\\SafeRdw\\Sources\\isr.c")
> #<compiled-function (file &optional coding-system) "...(4)" [file
> default-dir-real-find-file] 2 "Edit file FILENAME.\nSwitch to a buffer
> visiting file FILENAME,\ncreating one if none already exists.\nUnder
> XEmacs/Mule, optional second argument specifies the\ncoding system to use
> when decoding the file. Interactively,\nwith a prefix argument, you will
> be prompted for the coding system.\n\nNote: This function has been
> modified to work with default-dir." (list (expand-file-name
> ...))>("D:\\Eigene Dateien\\code\\hcs12\\SafeRdw\\Sources\\isr.c")
> call-interactively(find-file)
> #<compiled-function nil "...(4)" [toolbar-open-function
> call-interactively] 2 nil nil>()
> call-interactively(toolbar-open)
>
> What's the problem, what can I do?
>
> Kind regards,
> Frank
>
> ================================================================
>
> System Info to help track down your bug:
> ---------------------------------------
>
> OS version:
>
> Microsoft Windows 2000 [Version 5.00.2195]
> OS: Windows_NT
>
> XEmacs 21.4.13 "Rational FORTRAN" configured for `i586-pc-win32'.
>
> Building XEmacs in "d:\\xemacs\\xemacs-21.4-release\\nt".
> Using compiler "cl -nologo -W3 -O2 -G5 -ML".
> Installing XEmacs in "c:\\Program Files\\XEmacs\\XEmacs-21.4.13".
> Package path is "~\\.xemacs;;c:\\Program
> Files\\XEmacs\\site-packages;c:\\Program Files\\XEmacs\\xemacs-packages".
> Compiling in support for Microsoft Windows native GUI.
> Compiling in support for XPM images.
> Compiling in support for GIF images.
> Compiling in support for PNG images.
> Compiling in support for TIFF images.
> Compiling in support for JPEG images.
> Compiling in support for X-Face message headers.
> Compiling in support for toolbars.
> Compiling in support for dialogs.
> Compiling in support for widgets.
> Compiling in support for native sounds.
> Compiling in fast dired implementation.
> Using portable dumper.
>
>
> Load-Path Lisp Shadows:
> ----------------------
> (d:\Eigene Dateien\.xemacs\autorevert
> c:\Programme\XEmacs\xemacs-packages\lisp\edit-utils\autorevert
> d:\Eigene Dateien\.xemacs\pc-select
> c:\Programme\XEmacs\xemacs-packages\lisp\pc\pc-select d:\Eigene
> Dateien\.xemacs\tq
> c:\Programme\XEmacs\xemacs-packages\lisp\xemacs-base\tq d:\Eigene
> Dateien\.xemacs\custom c:\Programme\XEmacs\XEmacs\lisp\custom
> c:\Programme\XEmacs\xemacs-packages\lisp\build\build-report
> c:\Programme\XEmacs\XEmacs\lisp\build-report)
>
>
> Installed XEmacs Packages:
> -------------------------
>
> ((zenirc :version 1.13 :type regular)
> (xslt-process :version 1.11 :type regular)
> (xslide :version 1.08 :type regular)
> (xemacs-devel :version 1.58 :type single-file)
> (xemacs-base :version 1.78 :type regular)
> (x-symbol :version 1.05 :type regular)
> (w3 :version 1.28 :type regular)
> (vm :version 7.14 :type regular)
> (viper :version 1.36 :type regular)
> (view-process :version 1.12 :type regular)
> (vhdl :version 1.17 :type regular)
> (vc-cc :version 1.21 :type regular)
> (vc :version 1.37 :type regular)
> (tramp :version 1.16 :type regular)
> (tpu :version 1.12 :type regular)
> (tooltalk :version 1.13 :type regular)
> (tm :version 1.36 :type regular)
> (time :version 1.13 :type regular)
> (textools :version 1.14 :type regular)
> (text-modes :version 1.63 :type single-file)
> (texinfo :version 1.24 :type regular)
> (supercite :version 1.19 :type regular)
> (strokes :version 1.08 :type regular)
> (speedbar :version 1.26 :type regular)
> (sounds-wav :version 1.1 :type regular)
> (sounds-au :version 1.1 :type regular)
> (sml-mode :version 0.09 :type regular)
> (slider :version 1.13 :type regular)
> (sieve :version 1.13 :type regular)
> (sh-script :version 1.17 :type regular)
> (sgml :version 1.08 :type regular)
> (semantic :version 1.17 :type regular)
> (scheme :version 1.13 :type regular)
> (sasl :version 1.13 :type regular)
> (ruby-modes :version 1.01 :type regular)
> (rmail :version 1.13 :type regular)
> (reftex :version 1.3 :type regular)
> (python-modes :version 1.02 :type single-file)
> (psgml-dtds :version 1.02 :type regular)
> (psgml :version 1.41 :type regular)
> (ps-print :version 1.08 :type regular)
> (prog-modes
>:version
> 1
> .83
>:type
> single-file)
> (pgg :version 1.03 :type regular)
> (perl-modes :version 1.04 :type single-file)
> (pcomplete :version 1.02 :type regular)
> (pcl-cvs :version 1.64 :type regular)
> (pc :version 1.25 :type single-file)
> (os-utils :version 1.32 :type single-file)
> (oo-browser :version 1.03 :type regular)
> (ocaml :version 0.04 :type regular)
> (net-utils :version 1.32 :type single-file)
> (mmm-mode :version 1.0 :type regular)
> (misc-games :version 1.16 :type single-file)
> (mine :version 1.14 :type regular)
> (mh-e :version 1.23 :type regular)
> (mew :version 1.17 :type regular)
> (mailcrypt :version 2.12 :type regular)
> (mail-lib :version 1.6 :type regular)
> (liece :version 1.12 :type regular)
> (jde :version 1.45 :type regular)
> (ispell :version 1.24 :type regular)
> (ilisp :version 1.32 :type regular)
> (igrep :version 1.1 :type regular)
> (idlwave :version 1.3 :type regular)
> (ibuffer :version 1.08 :type regular)
> (hyperbole :version 1.12 :type regular)
> (hm--html-menus :version 1.21 :type regular)
> (haskell-mode :version 1.05 :type regular)
> (gnus :version 1.71 :type regular)
> (gnats :version 1.15 :type regular)
> (games :version 1.14 :type regular)
> (fsf-compat :version 1.12 :type single-file)
> (frame-icon :version 1.09 :type regular)
> (fortran-modes :version 1.02 :type single-file)
> (forms :version 1.14 :type regular)
> (footnote :version 1.15 :type regular)
> (eudc :version 1.38 :type regular)
> (eterm :version 1.13 :type regular)
> (ess :version 1.04 :type regular)
> (eshell :version 1.05 :type regular)
> (emerge :version 1.09 :type regular)
> (elib :version 1.1 :type single-file)
> (eieio :version 1.04 :type regular)
> (efs :version 1.29 :type regular)
> (edt :version 1.12 :type regular)
> (edit-utils :version 2.07 :type single-file)
> (ediff :version 1.47 :type regular)
> (edebug :version 1.18 :type regular)
> (ecrypto :version 0.13 :type regular)
> (ecb :version 1.1 :type regular)
> (docbookide :version 0.06 :type regular)
> (dired :version 1.13 :type regular)
> (dictionary :version 1.12 :type regular)
> (debug :version 1.16 :type regular)
> (crisp :version 1.12 :type regular)
> (cookie :version 1.14 :type regular)
> (clearcase :version 1.06 :type regular)
> (cc-mode :version 1.39 :type regular)
> (calendar :version 1.21 :type regular)
> (calc :version 1.23 :type regular)
> (c-support :version 1.16 :type single-file)
> (build :version 1.1 :type regular)
> (bbdb :version 1.23 :type regular)
> (auctex :version 1.35 :type regular)
> (apel :version 1.26 :type regular)
> (ada :version 1.13 :type regular)
> (Sun :version 1.13 :type regular))
>
>
> Features:
> --------
>
> (mail-abbrevs xemacsbug shadow sendmail rfc822 debug cus-edit cus-load
> align ecb-layout-defs eldoc semantic-c cc-mode cc-fonts cc-menus
> cc-cmds cc-styles cc-align cc-engine cc-vars cc-defs efs-cu desktop
> rsz-minibuf ell avltree stack-m elib-node w3-cus url mm mule-sysdp
> url-parse url-vars xml-parse doxymacs ecb ecb-autogen autoload ecb-tod
> ecb-cycle ecb-eshell ecb-navigate ecb-help ecb-jde efc ecb-layout
> compile ecb-create-layout ecb-mode-line ecb-compilation ecb-speedbar
> ecb-face tree-buffer overlay semantic-load semanticdb senator
> semantic-imenu semantic-sb imenu semantic-ia-sb semantic-analyze
> semantic-ctxt semantic-cb eieio-base eieio-speedbar eieio-custom
> wid-edit speedbar sb-image dframe eieio semantic-util-modes timer
> semantic-util semantic assoc working ecb-upgrade ecb-util tempo
> make-regexp crypt crypt++ hideshow ffap func-menu view-less view
> efs-ovwrt default-dir info tex-site tex-mik ediff-hook ediff-merg
> ediff-diff ediff-tbar ediff-wind ediff-help ediff-util ediff-mult
> ediff-init ediff pending-del pc-select paren blink-paren lazy-shot
> backup-dir filladapt permanent-buffers tcl shell-toggle sh-script
> skeleton executable sniff-mode ctypes font-lock tlc regexp-opt
> time-stamp jka-compr hippie-exp dabbrev calendar advice advice-preload
> uniquify bookmark pp clearcase reporter cus-face dired-faces
> dired-xemacs dired comint ring recent-files env edmacro
> zenirc-autoloads xslt-process-autoloads xslide-autoloads
> xemacs-devel-autoloads xemacs-base-autoloads x-symbol-autoloads
> w3-autoloads vm-autoloads viper-autoloads view-process-autoloads
> vhdl-autoloads vc-cc-autoloads vc-autoloads tramp-autoloads
> tpu-autoloads tooltalk-autoloads tm-autoloads time-autoloads
> textools-autoloads text-modes-autoloads texinfo-autoloads
> supercite-autoloads strokes-autoloads speedbar-autoloads
> sounds-wav-autoloads sounds-au-autoloads sml-mode-autoloads
> slider-autoloads sieve-autoloads sh-script-autoloads sgml-autoloads
> semantic-autoloads scheme-autoloads sasl-autoloads
> ruby-modes-autoloads rmail-autoloads reftex-autoloads
> python-modes-autoloads psgml-dtds-autoloads psgml-autoloads
> ps-print-autoloads prog-modes-autoloads pgg-autoloads
> perl-modes-autoloads pcomplete-autoloads pcl-cvs-autoloads
> pc-autoloads os-utils-autoloads oo-browser-autoloads ocaml-autoloads
> net-utils-autoloads mmm-mode-autoloads misc-games-autoloads
> mine-autoloads mh-e-autoloads mew-autoloads mailcrypt-autoloads
> mail-lib-autoloads liece-autoloads jde-autoloads ispell-autoloads
> ilisp-autoloads igrep-autoloads idlwave-autoloads ibuffer-autoloads
> hyperbole-autoloads hm--html-menus-autoloads haskell-mode-autoloads
> gnus-autoloads gnats-autoloads games-autoloads fsf-compat-autoloads
> frame-icon-autoloads fortran-modes-autoloads forms-autoloads
> footnote-autoloads eudc-autoloads eterm-autoloads ess-autoloads
> eshell-autoloads emerge-autoloads elib-autoloads eieio-autoloads
> efs-autoloads edt-autoloads edit-utils-autoloads ediff-autoloads
> edebug-autoloads ecrypto-autoloads ecb-autoloads docbookide-autoloads
> dired-autoloads dictionary-autoloads debug-autoloads crisp-autoloads
> cookie-autoloads clearcase-autoloads cc-mode-autoloads
> calendar-autoloads calc-autoloads c-support-autoloads build-autoloads
> bbdb-autoloads auctex-autoloads apel-autoloads ada-autoloads
> Sun-autoloads lisp-autoloads loadhist auto-show fontl-hooks code-cmds
> gutter-items menubar-items x-menubar dragdrop mode-motion mouse itimer
> auto-save lisp-mode easymenu iso8859-1 page buff-menu lib-complete
> help-nomule cus-file derived frame text-props obsolete cus-start
> custom widget cl-extra mini-cl cl cl-19 packages backquote
> very-early-lisp file-coding mswindows-scrollbars mswindows toolbar
> native-sound scrollbar network-streams subprocesses
> menu-accelerator-support menubar md5 xemacs gutter tiff png gif jpeg
> xface xpm xbm lisp-float-type windows-nt dragdrop-api dialog devices
> window-system base64)
>
>
> Recent keystrokes:
> -----------------
>
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> misc-user misc-user misc-user misc-user misc-user misc-user
> button1 button1up misc-user misc-user
>
>
> Recent messages (most recent first):
> -----------------------------------
>
> Loading xemacsbug...done
> Loading xemacsbug...
> Entering debugger...
> To install your edits, invoke [State] and choose the Set operation
> Creating customization buffer...done
> Creating customization setup...
> Creating customization items...
> Creating customization buttons...
> Creating customization buffer...
> Args out of range: #<killed buffer>, 25497, 25504
>
- 1 participants
- 0 comments
xemacs-patches archive searching broken?
20 years, 5 months
Malcolm Purvis
Malcolm Purvis
The search page for the xemacs-patches mailing list archive seems to be
returning incomplete results.
My procedure is:
1) Goto <http://list-archive.xemacs.org/xemacs-patches/>
2) Search for "Carbon" with all options left at their defaults.
This returns matches for 4 files, the earliest being in September this year.
My understanding is that is should return all messages containing 'Carbon'
back to 1998, of which there are more than 4. It's certainly missing the
message <http://list-archive.xemacs.org/xemacs-patches/200305/msg00078.html>
which was posted back in May.
Other oddities are:
1) Restricting the search for "Carbon" to May 2003 matches no files.
2) Restricting the search for "Carbon" to the last year (Nov 2003 - Dec 2002)
generates the following errors:
---------------------------------------------------------------------------
GLIMPSEOUT:/web/http-xemacs/bin/glimpse: regular expression too long
GLIMPSEOUT:/web/http-xemacs/bin/glimpse: regular expression too long
GLIMPSEOUT:/web/http-xemacs/bin/glimpse: regular expression too long
GLIMPSEOUT:/web/http-xemacs/bin/glimpse: regular expression too long
GLIMPSEOUT:/web/http-xemacs/bin/glimpse: regular expression too long
---------------------------------------------------------------------------
Any help would be appreciated.
Malcolm
--
Malcolm Purvis <malcolmpurvis(a)optushome.com.au>
Q: Why did the chicken cross the Mobius strip?
A: To get to the other... uh... err...
- 3 participants
- 3 comments
Address for W3 bugs
20 years, 5 months
Hrvoje Niksic
Hrvoje Niksic
Is there an address where I can report bugs in W3? It's not entirely
obvious what that address should be from browsing the sources, the
README and BUGS files.
I tried to mail the mailing list at gnu.org, but got no responses, and
the mailing list archives show a lack of any activity in the past
year.
Is W3 being maintained at all? If the answer is "no", shouldn't we
either take over maintainership or drop it from the packages if we
can't find a suitable maintainer?
- 5 participants
- 9 comments
Re: movement-based mode-hooks
20 years, 5 months
Matt Price
Matt Price
>>>>> "Matt" == Matt Price <matt.price(a)utoronto.ca> writes:
Matt> I have mode-hooks callingthese funcitons when either mode is
Matt> loaded. But, while these hooks worked fine in FSF Emacs, I
Matt> can't get them to work in xemacs on initial loading of a
Matt> message buffer (if I switch modes in mid-composition, the
Matt> movement *will* take place!
Try wrapping the functions in code to print a progress message (eg,
`(message "Moving cursor to first line of text")') to find out if the
hook is actually being called.
-- tried this, but seem to be doing a bad job of it (see code)
Show us the relevant code.
OK, so here goes.
In my init.el I have the following (excerpted, of course):
-----------------
;; post.el is in ~/elisp, so
(add-to-list 'load-path (expand-file-name "~/elisp"))
(load "/home/matt/elisp/post")
(setq default-major-mode 'text-mode)
(add-hook 'text-mode-hook 'turn-on-auto-fill)
;; this is the stuff that's not working
;; mail-text and other movements seem not to work under Xemacs
(add-hook 'mail-mode-hook 'mail-text)
(add-hook 'post-mode-hook 'post-goto-body)
;; post-mode documentation suggests putting this in init.el:
;; but I don't notice any effect; sometimes it's commented out,
;; sometimes not
(setq server-temp-file-regexp "mutt-")
(add-hook 'server-switch-hook
(function (lambda()
(cond ((string-match "Post" mode-name)
(post-goto-body))))))
;; associate mutt with postmode
(or (assoc "mutt-" auto-mode-alist)
(setq auto-mode-alist (cons'("mutt-" . post-mode) auto-mode-alist)))
-----------------
in post.el, there's one relevant variable and one function. You can see where
I tried to insert a message in post-goto-body and seem to have failed:
;; You may find the actual version of this mode at
;; http://astro.utoronto.ca/~reid/mutt/
;; snip ..
(defcustom post-jump-header t
"Specifies wheather post-mode should jump past any headers at the start of
the buffer"
:type 'boolean
:group 'post)
;;; snip..
.
(defun post-goto-body ()
"Go to the beginning of the message body."
(interactive)
(goto-char (point-min))
;; If the message has header, slide downward.
(and header-mode (save-match-data (re-search-forward "^$" nil t))
(next-line 1) (message "Moving cursor to first line of text")))
;; snip...
;; Jump past header if so required.
(cond (post-jump-header
(post-goto-body)))
-----------------------------
As I said inn my earlier post, with this setup xemacs will hop to the
message body if I switch to post-mode in mid-composition, but not when
the buffer initially opens.
I hope this makes things clearer. Please tell me if you need more
info.
thanks,
matt
- 1 participants
- 0 comments
Re: movement-based mode-hooks
20 years, 5 months
Stephen J. Turnbull
Stephen J. Turnbull
>>>>> "Matt" == Matt Price <matt.price(a)utoronto.ca> writes:
Matt> I have mode-hooks callingthese funcitons when either mode is
Matt> loaded. But, while these hooks worked fine in FSF Emacs, I
Matt> can't get them to work in xemacs on initial loading of a
Matt> message buffer (if I switch modes in mid-composition, the
Matt> movement *will* take place!
Try wrapping the functions in code to print a progress message (eg,
`(message "Moving cursor to first line of text")') to find out if the
hook is actually being called.
-- tried this, but seem to be doing a bad job of it (see code)
Show us the relevant code.
OK, so here goes.
In my init.el I have the following (excerpted, of course):
-----------------
;; post.el is in ~/elisp, so
(add-to-list 'load-path (expand-file-name "~/elisp"))
(load "/home/matt/elisp/post")
(setq default-major-mode 'text-mode)
(add-hook 'text-mode-hook 'turn-on-auto-fill)
;; this is the stuff that's not working
;; mail-text and other movements seem not to work under Xemacs
(add-hook 'mail-mode-hook 'mail-text)
(add-hook 'post-mode-hook 'post-goto-body)
;; post-mode documentation suggests putting this in init.el:
;; but I don't notice any effect; sometimes it's commented out,
;; sometimes not
(setq server-temp-file-regexp "mutt-")
(add-hook 'server-switch-hook
(function (lambda()
(cond ((string-match "Post" mode-name)
(post-goto-body))))))
;; associate mutt with postmode
(or (assoc "mutt-" auto-mode-alist)
(setq auto-mode-alist (cons'("mutt-" . post-mode) auto-mode-alist)))
-----------------
in post.el, there's one relevant variable and one function. You can see where
I tried to insert a message in post-goto-body and seem to have failed:
;; You may find the actual version of this mode at
;; http://astro.utoronto.ca/~reid/mutt/
;; snip ..
(defcustom post-jump-header t
"Specifies wheather post-mode should jump past any headers at the start of
the buffer"
:type 'boolean
:group 'post)
;;; snip..
.
(defun post-goto-body ()
"Go to the beginning of the message body."
(interactive)
(goto-char (point-min))
;; If the message has header, slide downward.
(and header-mode (save-match-data (re-search-forward "^$" nil t))
(next-line 1) (message "Moving cursor to first line of text")))
;; snip...
;; Jump past header if so required.
(cond (post-jump-header
(post-goto-body)))
-----------------------------
As I said inn my earlier post, with this setup xemacs will hop to the
message body if I switch to post-mode in mid-composition, but not when
the buffer initially opens.
I hope this makes things clearer. Please tell me if you need more
info.
thanks,
matt
- 1 participants
- 0 comments
XEmacs Packages have been pre-released (2003-12-01-14)
20 years, 5 months
Norbert Koch
Norbert Koch
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hey there everyone.
I have just added the following packages to the 'Pre-Releases'
directory:
New Packages in Pre-Release:
===========================
auctex-1.36-pkg.tar.gz upstream version: 11.13
fsf-compat-1.14-pkg.tar.gz upstream version: none
riece-1.13-pkg.tar.gz upstream version: 0.1.5
Previously Announced Packages Still in Pre-Release:
==================================================
cc-mode-1.42-pkg.tar.gz upstream version: 5.30.8
ecb-1.14-pkg.tar.gz upstream version: 2.11
erc-0.02-pkg.tar.gz upstream version: Version 4.0 Revision: 1.584
hyperbole-1.14-pkg.tar.gz upstream version: 4.18
mh-e-1.28-pkg.tar.gz upstream version: 7.4.2
net-utils-1.34-pkg.tar.gz upstream version: none
text-modes-1.72-pkg.tar.gz upstream version: none
Detailed Changes:
================
- ------- ChangeLog Entries from xemacs-packages/auctex/ChangeLog -------
2003-12-01 Norbert Koch <viteno(a)xemacs.org>
* Makefile (VERSION): XEmacs package 1.36 released.
2003-08-02 Mike Sperber <mike(a)xemacs.org>
* latex.el (latex-mode): Really turn off filladapt. It just
doesn't work with `LaTeX-fill-paragraph'.
2003-10-26 Ville Skyttä <scop(a)xemacs.org>
* CHANGES: cvs rm'd, generated from texi/changes.texi.
* INSTALLATION: Ditto, generated from texi/install.texi.
* README: Ditto, generated from texi/intro.texi.
* .cvsignore: Add CHANGES, INSTALLATION and README.
* Makefile (EXTRA_DEPENDENCIES): Add texi/math-ref.log and
texi/tex-ref.log.
* texi/.cvsignore: Add math-ref.log and tex-ref.log.
2003-03-21 Ben Wing <ben(a)xemacs.org>
* texi/.cvsignore: Add entries for auc-tex*.html.
2003-03-09 Ben Wing <ben(a)xemacs.org>
* Makefile:
Delete explicit compile:: and binkit: rules.
Don't add custom-load.elc to the list of generated elc's.
Include Local.rules.inc at the beginning for access to
BUILD_WITHOUT_MULE, and put the include of XEmacs.rules at the
end.
Use EXPLICIT_DOCS instead of explicitly giving the targets
and dependencies.
Add INSTALLATION to EXTRA_SOURCES.
Copy various stuff from texi/Makefile.
Create EXTRA_DEPENDENCIES; delete EXTRA_OBJS.
* texi/Makefile: Delete.
- ------- ChangeLog Entries from xemacs-packages/fsf-compat/ChangeLog -------
2003-12-01 Norbert Koch <viteno(a)xemacs.org>
* Makefile (VERSION): XEmacs package 1.14 released.
2003-11-29 Adrian Aichner <adrian(a)xemacs.org>
* goto-addr.el: Require overlay based (featurep 'xemacs) instead
of (fboundp 'overlays-in).
- ------- ChangeLog Entries from xemacs-packages/riece/ChangeLog -------
2003-12-01 Norbert Koch <viteno(a)xemacs.org>
* Makefile (VERSION): XEmacs package 1.13 released.
2003-12-01 Adrian Aichner <adrian(a)xemacs.org>
* Makefile: Fix a copy-cat error.
Installing These:
================
Manually:
- --------
1) Download the packages that you want to install from:
/ftp.xemacs.org:/pub/xemacs/beta/experimental/packages/
2) Unpack them to: [1]
/usr/local/lib/xemacs/xemacs-packages/
3) Re-start XEmacs.
Using XEmacs Package Tools (XEmacs 21.[245].x):
- ----------------------------------------------
1) Tools -> Packages -> Add Download Site -> Pre-Releases
2) Tools -> Packages -> List and Install
3) Select the packages you wish to install (there are brief
instructions at the bottom of the packages buffer).
4) Packages -> Install/Remove Selected
5) Re-start XEmacs.
Using XEmacs Package Tools (XEmacs 21.1.14):
- -------------------------------------------
1) Options -> Manage Packages -> Add Download Site -> Pre-Releases
2) Options -> Manage Packages -> List and Install
3 - 5) As per XEmacs 21.[245].x.
norbert - XEmacs Package Release Manager.
Footnotes:
[1] Note: Mule packages should be installed into:
/usr/local/lib/xemacs/mule-packages/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (FreeBSD)
iD8DBQE/y0T2gu3ywdHdhM0RApZPAJ0ah0eA/cwIhZc4x1jTZkslOI7x1QCbBP3d
muK54Dg3Qng6Cr8WkBRiAQ0=
=SwzR
-----END PGP SIGNATURE-----
- 1 participants
- 0 comments
Re: [PATCH] Xft patch reloaded, #3
20 years, 5 months
Vin Shelton
Vin Shelton
<Redirected from xemacs-patches to xemacs-beta>
Hrvoje Niksic <hniksic(a)xemacs.org> writes:
> Matthias Neubauer <neubauer(a)informatik.uni-freiburg.de> writes:
>
>> Our intention never was to fix this mess! We never intended to. All we
>> did was adding another, separate and independent, font model
>
> But that's exactly what Stephen is objecting to!
>
> Someone who did want to fix the mess is facing a harder job if he also
> had to take Xft into account. I'm not sure if that's a good enough
> reason to "stop progress", but I certainly see Stephen's point.
>
> I'm really undecided on this one.
I have not looked at the patch, but vetoing it on the principle that
the Great Font Unification will be impeded by this work is not
conducive to progress, in my opinion.
Stephen wrote:
> Sure. So what? The question is does it make XEmacs better? My
> conclusion is that it makes XEmacs distinctly _worse_ except as eye
> candy.
Matthias Neubauer wrote:
> It makes my daily XEmacs life better in at least one respect: I'm now
> able to work with an eight point default font. This is two points
> smaller than before---which of course results in much more code on my
> screen at once.
>From my point of view, this amounts to an improvement in usability for
Matthias. What do others think?
- Vin
- 6 participants
- 15 comments
more than 16 colors in xterm?
20 years, 5 months
Matt Price
Matt Price
having had my last problem solved for me instnataneously (thanks!), I
can't resist trying this one out:
I work mostly within the xterm (xemacs -nw...), and I've customized all
my fontlock colors to work in the terminal. Everything's fine, but I
still do wish I could get more than the 16 standard xterm colors when
in xterm. The manual seems to suggest that I can do this somehow, but
I haven't had any luck. Is there an easy way?
Thanks,
Matt
- 2 participants
- 2 comments