Re: Is GTK required for 22.0? No. [was: XEmacs 22.0 Release Target]
23 years, 2 months
Michael Sperber
Michael Sperber
>>>>> "Stephen" == Stephen J Turnbull <turnbull(a)sk.tsukuba.ac.jp> writes:
Stephen> I personally see no particular need to _have_ a HEAD.
But we do. All sorts of CVS history doesn't work on a branch.
--
Cheers =8-} Mike
Friede, Völkerverständigung und überhaupt blabla
- 7 participants
- 7 comments
Is GTK required for 22.0? No. [was: XEmacs 22.0 Release Target]
23 years, 2 months
Stephen J. Turnbull
Stephen J. Turnbull
This has potential to be a FAQ, so I'm responding on xemacs-beta (and
will add something to the release page, too).
>>>>> "AK" == Katz, Amir <Amir_Katz(a)bmc.com> writes:
AK> I'm concerned about the GTK issue. Is GTK available on
AK> Solaris?
The short, not very responsive, answer is, "Yes, if you build and
install it." That is, as far as I know, GTK can be built and used on
any *nix flavor that supports X11R6. I don't know how well it works
and is supported on Solaris, HPUX, AIX, etc, though.
The real answer is that when I wrote
o Integration of GTK XEmacs with the main line.
I really meant
o Integration of support for GTK with the main line.
Ie, there will be a --with-gtk configuration option that works the
same way as --with-dialogs=motif or --with-widgets=athena.
The present plan is to default to --with-gtk=no for the release on
_all_ platforms, including Linux. This probably implies the same
default for the prereleases.
People who have no need or desire for GTK at this time can ignore it,
except that some of the changes made for GTK may impact other
platforms either because it makes sense to unify the code, or
inadvertantly (eg, a misplaced #ifdef HAVE_GTK). Wringing out such
bugs is one of the purposes of the test period.
--
University of Tsukuba Tennodai 1-1-1 Tsukuba 305-8573 JAPAN
Institute of Policy and Planning Sciences Tel/fax: +81 (298) 53-5091
_________________ _________________ _________________ _________________
What are those straight lines for? "XEmacs rules."
- 8 participants
- 12 comments
Configure 21.1.14 does not find XPM on Cygwin without X11 install ed
23 years, 2 months
Bush, David
Bush, David
I did a fresh update of Cygwin and then downloaded the
21.1.14 tarball. Configure was run without any options.
It failed to find XPM because the first of the two test
programs would not compile because X11 header files
could not be found. Configure for 21.2.43 does
correctly detect XPM.
I don't understand configure well enough to create a
patch, but the only difference in the XPM section
of the two configure scripts is that the 21.2.43
version has the line "#define XPM_NUMBERS" at line 7543
of the file. This would be at line 6958 of the 21.1.14
version.
David Bush
Software Engineer
Dialogic, an Intel Company
Phone: (703) 633-3384
Fax: (703) 633-3319
mailto:David.Bush＠Dialogic.com
http://www.dialogic.com
- 3 participants
- 3 comments
shifted arrow keys and the region
23 years, 2 months
John H Palmieri
John H Palmieri
XEmacs 21.2 (beta42) \"Poseidon\" [Lucid] (alphaev5-dec-osf5.0) of Mon Jan 22 2001 on goedel1
I was just playing around and I discovered that if I hold the shift
key down and hit the arrow keys, the mark is set and the region is
activated. In fact, it acts just like I hit 'C-spc' and then the
unshifted arrow keys. This seems like a fine thing to me. The
complete lack of documentation is what puzzles me: if I run
'describe-key' on 'Sh-up', I get the description for 'up'. (Actually,
if I hit 'C-h k', I get the prompt "Describe key: ". If I hit
'Sh-up', then I see "Sh-up" appear briefly in the minibuffer, and
*then* I get the description for the 'up' key.) The description for
'up' doesn't say anything about the behavior when the shift key is
held down.
Similarly, if I hit 'C-h b', there are no listings for the shifted
arrow keys.
So: should the function describe-key give a description for 'Sh-up'
(etc.)? Should the documentation for each arrow key say what happens
if you hold down the shift key? Should describe-bindings have
listings for the shifted arrow keys? (A cursory inspection of the
info pages doesn't help much, either; for instance, these shifted
arrow keystrokes are not given in the "Setting the Mark" node.)
--
John H. Palmieri
Dept of Mathematics, Box 354350 palmieri(a)math.washington.edu
University of Washington http://www.math.washington.edu/~palmieri/
Seattle, WA 98195-4350
- 8 participants
- 13 comments
21.1.14 vs. alphaev5-dec-osf5.0
23 years, 2 months
John H Palmieri
John H Palmieri
I've been running various versions of XEmacs 21.2 lately, but I
thought I would try getting the new release 21.1.14, just for kicks.
When I tried to configure it, I got this message:
./configure: XEmacs hasn't been ported to `alphaev5-dec-osf5.0' systems.
./configure: Check `etc/MACHINES' for recognized configuration names.
'./configure ... alpha-dec-osf1' worked, sort of (the tests in 'make
check' report 100% success, but then it hangs; otherwise, xemacs seems
to run okay). Is it worthwhile fixing configure to recognize
alphaev5-dec-osf5.0?
(On a related topic, should /etc/MACHINES be updated in version
21.2.43, to reflect the fact that alphaev5-dec-osf5.0 is recognized by
configure?)
--
John H. Palmieri
Dept of Mathematics, Box 354350 palmieri(a)math.washington.edu
University of Washington http://www.math.washington.edu/~palmieri/
Seattle, WA 98195-4350
- 3 participants
- 4 comments
Re: loadup.el, You LIE! (21.2.42 + a few hours CVS]
23 years, 2 months
Michael Sperber
Michael Sperber
>>>>> "Stephen" == Stephen J Turnbull <turnbull(a)sk.tsukuba.ac.jp> writes:
Stephen> Michael Sperber [Mr. Preprocessor] writes:
>>>>>> "Stephen" == Stephen J Turnbull <turnbull(a)sk.tsukuba.ac.jp> writes:
Stephen> XEmacs in the middle of building itself should not be able to find
Stephen> my package hierarchy.)
>> Sure it should be---that part hasn't changed.
Stephen> Well, maybe it hasn't changed, but there's something wrong if _at
Stephen> build time_ core Lisp gets shadowed by stuff in the
Stephen> packages.
Well, dump time uses the exact same rules as run time. I consider
that an extremely desirable property.
Stephen> IMO, an XEmacs in the process of building should by default trust
Stephen> nothing outside of the core Lisp directories. There should be a
Stephen> "more-dumped-lisp.el" file which is either created by a human or by
Stephen> ./configure. All stuff from outside the core that gets dumped should
Stephen> go into that file. It should contain nothing but explicit loads with
Stephen> full pathnames, although if human has a lot of such stuff to dump, he
Stephen> might be lazy and add some stuff to load-path.
You're right, but the code in question was written at a time where we
*had* to get at the packages because of the dumped-lisp files. Once
they go away completely, I'm all for scratching all the code
associated with it.
Steve (Youngs, that is): are there any left?
--
Cheers =8-} Mike
Friede, Völkerverständigung und überhaupt blabla
- 3 participants
- 2 comments
Background pixmaps cannot be set more than once
23 years, 2 months
Dmitry Yaitskov
Dmitry Yaitskov
Hi,
Some time ago (specifically, on 29/12/00), Kilian A. Foth reported the
following bug:
>This bug report will be sent to the XEmacs Development Team,
> not to your local site managers!!
>Please write in English, because the XEmacs maintainers do not have
>translators to read other languages for them.
>
> In XEmacs 21.2 (beta38) "Peisino,Ak(B" [Lucid]
> (sparc-sun-solaris2.8, Mule) of Fri Dec 29 2000 on nats21
> configured using `configure --with-mule --with-xpm
> --with-site-lisp=yes --package-path=/opt/lib/xemacs-21.2-b38/'
>
>Please describe exactly what actions triggered the bug
>and the precise symptoms of the bug:
>
>Doing
>
> (set-face-background-pixmap 'default "/my/pretty/file1.jpeg")
>
>correctly sets the background pixmap the image in file1, but
>following up with
>
> (set-face-background-pixmap 'default "/my/pretty/file2.jpeg")
>
>displays the same image again, not the second one as under 21.1.
>
Well, the bug's still there in beta 43 ("XEmacs 21.2 (beta43)
\"Terspichore\" [Lucid] (i686-pc-cygwin) of Tue Jan 30 2001 on LUCY").
Any ideas?
--
Cheers,
-Dima.
- 2 participants
- 2 comments
Can Not List Packages with Latest 21.2 CVS
23 years, 2 months
Vin Shelton
Vin Shelton
If I start a -vanilla xemacs 21.2 and then attempt to 'List & Install'
the packages from the Tools menu, I get the following backtrace:
Signaling: (wrong-type-argument stringp nil)
expand-file-name(nil)
package-get-update-base(nil t)
package-get-require-base(t)
#<compiled-function nil "...(137)" [pui-info-buffer pui-menu buffer-read-only sep-string start outbuf package-get-require-base t get-buffer-create "===============================================================================\n" nil message "Creating package list ..." sit-for 0 buffer-disable-undo erase-buffer kill-all-local-variables use-local-map list-packages-mode "Packages" "\nWarning: No download sites specified. Package index may be out of date.\n If you intend to install packages, specify download sites first.\n\n" " Latest Installed\n Package name Vers. Vers. Description\n" " Latest\n Package name Vers. Description\n" mapcar #<compiled-function ... "...(204)" ... 10> sort copy-sequence #<compiled-function ... "...(10)" ... 3> documentation set-buffer-modified-p pop-to-buffer delete-other-windows featurep menubar set-buffer-menubar add-submenu clear-message pui-display-keymap major-mode mode-name truncate-lines package-get-remote pui-list-verbose package-get-base pui-selected-packages pui-deleted-packages current-menubar mode-popup-menu] 6 ("/usr/local/xemacs-21.2-2001-01-25/lib/xemacs-21.2-b42/lisp/package-ui.elc" . 13405) nil>()
call-interactively(pui-list-packages)
If I select a download site (e.g. xemacs.org), I then get the
following backtrace when I try to List & Install:
Signaling: (ftp-error "FTP Error: DIR failed: 500 Illegal PORT command.")
signal(ftp-error ("FTP Error: DIR failed: 500 Illegal PORT command."))
efs-error("ftp.xemacs.org" "anonymous" "DIR failed: 500 Illegal PORT command.")
#<compiled-function (result line cont-lines host-type listing-type host user temp-file path switches file lsargs noparse parse noerror msg nowait cont) "...(286)" [get-buffer efs-ftp-process-buffer host user buff saved-buff (...) ascii efs-process-client-altered-xfer-type (...) result efs-ls-dumb-check host-type unknown listing-type unix:unknown line file path lsargs msg noparse noerror nowait cont listing-result efs-call-cont nil efs-error "DIR failed: " efs-ftp-path temp-file efs-add-file-entry efs-host-type efs-gateway-host fundamental-mode jka-compr-enabled efs-verbose default-major-mode get-buffer-create efs-data-buffer-name erase-buffer file-readable-p sleep-for efs-retry-time insert-file-contents format "list data file %s not readable" parse efs-set-files ...] 13>(failed "500 Illegal PORT command." "" unix unix:unknown "ftp.xemacs.org" "anonymous" "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil)
apply(#<compiled-function (result line cont-lines host-type listing-type host user temp-file path switches file lsargs noparse parse noerror msg nowait cont) "...(286)" [get-buffer efs-ftp-process-buffer host user buff saved-buff (...) ascii efs-process-client-altered-xfer-type (...) result efs-ls-dumb-check host-type unknown listing-type unix:unknown line file path lsargs msg noparse noerror nowait cont listing-result efs-call-cont nil efs-error "DIR failed: " efs-ftp-path temp-file efs-add-file-entry efs-host-type efs-gateway-host fundamental-mode jka-compr-enabled efs-verbose default-major-mode get-buffer-create efs-data-buffer-name erase-buffer file-readable-p sleep-for efs-retry-time insert-file-contents format "list data file %s not readable" parse efs-set-files ...] 13> (failed "500 Illegal PORT command." "" unix unix:unknown "ftp.xemacs.org" "anonymous" "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil))
efs-call-cont((#<compiled-function (result line cont-lines host-type listing-type host user temp-file path switches file lsargs noparse parse noerror msg nowait cont) "...(286)" [get-buffer efs-ftp-process-buffer host user buff saved-buff ... ascii efs-process-client-altered-xfer-type ... result efs-ls-dumb-check host-type unknown listing-type unix:unknown line file path lsargs msg noparse noerror nowait cont listing-result efs-call-cont nil efs-error "DIR failed: " efs-ftp-path temp-file efs-add-file-entry efs-host-type efs-gateway-host fundamental-mode jka-compr-enabled efs-verbose default-major-mode get-buffer-create efs-data-buffer-name erase-buffer file-readable-p sleep-for efs-retry-time insert-file-contents format "list data file %s not readable" parse efs-set-files ...] 13> unix unix:unknown "ftp.xemacs.org" "anonymous" "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil) failed "500 Illegal PORT command." "")
#<compiled-function (result line cont-lines host user proc cmd msg pre-cont cont nowait noretry) "...(199)" [noretry result fatal efs-send-cmd host user cmd msg pre-cont cont nowait t 1 retry afsc-result afsc-line 2 afsc-cont-lines failed (append rename put) quote stor match-data case-fold-search cfs buff match-data (...) nil string-match efs-write-protect-msgs line efs-write-recover efs-host-type cont-lines efs-call-cont] 12>(failed "500 Illegal PORT command." "" "ftp.xemacs.org" "anonymous" #<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> (dir "" "/tmp/acs/efsbdBKvN" "-al") "Listing /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function (result line cont-lines host-type listing-type host user temp-file path switches file lsargs noparse parse noerror msg nowait cont) "...(286)" [get-buffer efs-ftp-process-buffer host user buff saved-buff ... ascii efs-process-client-altered-xfer-type ... result efs-ls-dumb-check host-type unknown listing-type unix:unknown line file path lsargs msg noparse noerror nowait cont listing-result efs-call-cont nil efs-error "DIR failed: " efs-ftp-path temp-file efs-add-file-entry efs-host-type efs-gateway-host fundamental-mode jka-compr-enabled efs-verbose default-major-mode get-buffer-create efs-data-buffer-name erase-buffer file-readable-p sleep-for efs-retry-time insert-file-contents format "list data file %s not readable" parse efs-set-files ...] 13> unix unix:unknown "ftp.xemacs.org" "anonymous" "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil) nil nil)
apply(#<compiled-function (result line cont-lines host user proc cmd msg pre-cont cont nowait noretry) "...(199)" [noretry result fatal efs-send-cmd host user cmd msg pre-cont cont nowait t 1 retry afsc-result afsc-line 2 afsc-cont-lines failed (append rename put) quote stor match-data case-fold-search cfs buff match-data (...) nil string-match efs-write-protect-msgs line efs-write-recover efs-host-type cont-lines efs-call-cont] 12> (failed "500 Illegal PORT command." "" "ftp.xemacs.org" "anonymous" #<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> (dir "" "/tmp/acs/efsbdBKvN" "-al") "Listing /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function ... "...(286)" ... 13> unix unix:unknown "ftp.xemacs.org" "anonymous" "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil) nil nil))
efs-call-cont((#<compiled-function (result line cont-lines host user proc cmd msg pre-cont cont nowait noretry) "...(199)" [noretry result fatal efs-send-cmd host user cmd msg pre-cont cont nowait t 1 retry afsc-result afsc-line 2 afsc-cont-lines failed ... quote stor match-data case-fold-search cfs buff match-data ... nil string-match efs-write-protect-msgs line efs-write-recover efs-host-type cont-lines efs-call-cont] 12> "ftp.xemacs.org" "anonymous" #<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> (dir "" "/tmp/acs/efsbdBKvN" "-al") "Listing /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function ... "...(286)" ... 13> unix unix:unknown "ftp.xemacs.org" "anonymous" "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil) nil nil) failed "500 Illegal PORT command." "")
efs-process-filter(#<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> "500 Illegal PORT command.\n")
accept-process-output(#<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run>)
byte-code("..." [efs-process-busy efs-process-nowait process-status proc (run open) accept-process-output] 2)
efs-raw-send-cmd(#<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> "ls \"-al\" /tmp/acs/efsbdBKvN" "Listing /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function (result line cont-lines host user proc cmd msg pre-cont cont nowait noretry) "...(199)" [noretry result fatal efs-send-cmd host user cmd msg pre-cont cont nowait t 1 retry afsc-result afsc-line 2 afsc-cont-lines failed ... quote stor match-data case-fold-search cfs buff match-data ... nil string-match efs-write-protect-msgs line efs-write-recover efs-host-type cont-lines efs-call-cont] 12> "ftp.xemacs.org" "anonymous" #<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> (dir "" "/tmp/acs/efsbdBKvN" "-al") "Listing /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function ... "...(286)" ... 13> unix unix:unknown "ftp.xemacs.org" "anonymous" "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil) nil nil) nil)
efs-send-cmd("ftp.xemacs.org" "anonymous" (dir "" "/tmp/acs/efsbdBKvN" "-al") "Listing /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function (result line cont-lines host-type listing-type host user temp-file path switches file lsargs noparse parse noerror msg nowait cont) "...(286)" [get-buffer efs-ftp-process-buffer host user buff saved-buff ... ascii efs-process-client-altered-xfer-type ... result efs-ls-dumb-check host-type unknown listing-type unix:unknown line file path lsargs msg noparse noerror nowait cont listing-result efs-call-cont nil efs-error "DIR failed: " efs-ftp-path temp-file efs-add-file-entry efs-host-type efs-gateway-host fundamental-mode jka-compr-enabled efs-verbose default-major-mode get-buffer-create efs-data-buffer-name erase-buffer file-readable-p sleep-for efs-retry-time insert-file-contents format "list data file %s not readable" parse efs-set-files ...] 13> unix unix:unknown "ftp.xemacs.org" "anonymous" "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil) nil)
#<compiled-function (result line cont-lines host-type listing-type host user temp temp-file path switches file lsargs noparse parse noerror msg nowait cont nlist) "...(103)" [result noerror cont efs-call-cont nil efs-error host user format "CWD %s failed: " line efs-send-cmd nlist dir file-name-nondirectory path temp lsargs msg t "Listing %s" efs-relativize-filename file #<compiled-function ... "...(286)" ... 13> host-type listing-type temp-file switches noparse parse nowait] 22>(nil "250 CWD command successful." "" unix unix:unknown "ftp.xemacs.org" "anonymous" ("/tmp/acs/efsbdBKvN" . "/tmp/acs/efsbdBKvN") "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil nil)
apply(#<compiled-function (result line cont-lines host-type listing-type host user temp temp-file path switches file lsargs noparse parse noerror msg nowait cont nlist) "...(103)" [result noerror cont efs-call-cont nil efs-error host user format "CWD %s failed: " line efs-send-cmd nlist dir file-name-nondirectory path temp lsargs msg t "Listing %s" efs-relativize-filename file #<compiled-function ... "...(286)" ... 13> host-type listing-type temp-file switches noparse parse nowait] 22> (nil "250 CWD command successful." "" unix unix:unknown "ftp.xemacs.org" "anonymous" ("/tmp/acs/efsbdBKvN" . "/tmp/acs/efsbdBKvN") "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil nil))
efs-call-cont((#<compiled-function (result line cont-lines host-type listing-type host user temp temp-file path switches file lsargs noparse parse noerror msg nowait cont nlist) "...(103)" [result noerror cont efs-call-cont nil efs-error host user format "CWD %s failed: " line efs-send-cmd nlist dir file-name-nondirectory path temp lsargs msg t "Listing %s" efs-relativize-filename file #<compiled-function ... "...(286)" ... 13> host-type listing-type temp-file switches noparse parse nowait] 22> unix unix:unknown "ftp.xemacs.org" "anonymous" ("/tmp/acs/efsbdBKvN" . "/tmp/acs/efsbdBKvN") "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil nil) nil "250 CWD command successful." "")
#<compiled-function (result line cont-lines host user proc cmd msg pre-cont cont nowait noretry) "...(199)" [noretry result fatal efs-send-cmd host user cmd msg pre-cont cont nowait t 1 retry afsc-result afsc-line 2 afsc-cont-lines failed (append rename put) quote stor match-data case-fold-search cfs buff match-data (...) nil string-match efs-write-protect-msgs line efs-write-recover efs-host-type cont-lines efs-call-cont] 12>(nil "250 CWD command successful." "" "ftp.xemacs.org" "anonymous" #<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> (cwd "/pub/xemacs/packages/") "CWD'ing to /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function (result line cont-lines host-type listing-type host user temp temp-file path switches file lsargs noparse parse noerror msg nowait cont nlist) "...(103)" [result noerror cont efs-call-cont nil efs-error host user format "CWD %s failed: " line efs-send-cmd nlist dir file-name-nondirectory path temp lsargs msg t "Listing %s" efs-relativize-filename file #<compiled-function ... "...(286)" ... 13> host-type listing-type temp-file switches noparse parse nowait] 22> unix unix:unknown "ftp.xemacs.org" "anonymous" ("/tmp/acs/efsbdBKvN" . "/tmp/acs/efsbdBKvN") "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil nil) nil nil)
apply(#<compiled-function (result line cont-lines host user proc cmd msg pre-cont cont nowait noretry) "...(199)" [noretry result fatal efs-send-cmd host user cmd msg pre-cont cont nowait t 1 retry afsc-result afsc-line 2 afsc-cont-lines failed (append rename put) quote stor match-data case-fold-search cfs buff match-data (...) nil string-match efs-write-protect-msgs line efs-write-recover efs-host-type cont-lines efs-call-cont] 12> (nil "250 CWD command successful." "" "ftp.xemacs.org" "anonymous" #<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> (cwd "/pub/xemacs/packages/") "CWD'ing to /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function ... "...(103)" ... 22> unix unix:unknown "ftp.xemacs.org" "anonymous" ("/tmp/acs/efsbdBKvN" . "/tmp/acs/efsbdBKvN") "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil nil) nil nil))
efs-call-cont((#<compiled-function (result line cont-lines host user proc cmd msg pre-cont cont nowait noretry) "...(199)" [noretry result fatal efs-send-cmd host user cmd msg pre-cont cont nowait t 1 retry afsc-result afsc-line 2 afsc-cont-lines failed ... quote stor match-data case-fold-search cfs buff match-data ... nil string-match efs-write-protect-msgs line efs-write-recover efs-host-type cont-lines efs-call-cont] 12> "ftp.xemacs.org" "anonymous" #<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> (cwd "/pub/xemacs/packages/") "CWD'ing to /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function ... "...(103)" ... 22> unix unix:unknown "ftp.xemacs.org" "anonymous" ("/tmp/acs/efsbdBKvN" . "/tmp/acs/efsbdBKvN") "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil nil) nil nil) nil "250 CWD command successful." "")
efs-process-filter(#<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> "250 CWD command successful.\n")
accept-process-output(#<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run>)
byte-code("..." [efs-process-busy efs-process-nowait process-status proc (run open) accept-process-output] 2)
efs-raw-send-cmd(#<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> "quote cwd /pub/xemacs/packages/" "CWD'ing to /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function (result line cont-lines host user proc cmd msg pre-cont cont nowait noretry) "...(199)" [noretry result fatal efs-send-cmd host user cmd msg pre-cont cont nowait t 1 retry afsc-result afsc-line 2 afsc-cont-lines failed ... quote stor match-data case-fold-search cfs buff match-data ... nil string-match efs-write-protect-msgs line efs-write-recover efs-host-type cont-lines efs-call-cont] 12> "ftp.xemacs.org" "anonymous" #<process "*ftp anonymous(a)ftp.xemacs.org*" pid 5994 state:run> (cwd "/pub/xemacs/packages/") "CWD'ing to /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function ... "...(103)" ... 22> unix unix:unknown "ftp.xemacs.org" "anonymous" ("/tmp/acs/efsbdBKvN" . "/tmp/acs/efsbdBKvN") "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil nil) nil nil) nil)
efs-send-cmd("ftp.xemacs.org" "anonymous" (cwd "/pub/xemacs/packages/") "CWD'ing to /anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" nil (#<compiled-function (result line cont-lines host-type listing-type host user temp temp-file path switches file lsargs noparse parse noerror msg nowait cont nlist) "...(103)" [result noerror cont efs-call-cont nil efs-error host user format "CWD %s failed: " line efs-send-cmd nlist dir file-name-nondirectory path temp lsargs msg t "Listing %s" efs-relativize-filename file #<compiled-function ... "...(286)" ... 13> host-type listing-type temp-file switches noparse parse nowait] 22> unix unix:unknown "ftp.xemacs.org" "anonymous" ("/tmp/acs/efsbdBKvN" . "/tmp/acs/efsbdBKvN") "/tmp/acs/efsbdBKvN" "/pub/xemacs/packages/" "-al" "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" parse t nil t nil nil nil) nil)
efs-ls("/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/" "-al" t parse nil)
efs-get-files("/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/")
efs-get-file-entry("/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/package-index.LATEST.pgp")
#<compiled-function (path) "...(7)" [efs-get-file-entry path t] 2>("/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/package-index.LATEST.pgp")
apply(#<compiled-function (path) "...(7)" [efs-get-file-entry path t] 2> "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/package-index.LATEST.pgp")
efs-internal-file-exists-p(unix "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/package-index.LATEST.pgp")
efs-file-exists-p("/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/package-index.LATEST.pgp")
apply(efs-file-exists-p "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/package-index.LATEST.pgp")
efs-file-handler-function(file-exists-p "/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/package-index.LATEST.pgp")
file-exists-p("/anonymous＠ftp.xemacs.org:pub/xemacs/packages/package-index.LATEST.pgp")
package-get-locate-file("package-index.LATEST.pgp" t nil)
package-get-locate-index-file(nil)
package-get-update-base(nil t)
package-get-require-base(t)
#<compiled-function nil "...(137)" [pui-info-buffer pui-menu buffer-read-only sep-string start outbuf package-get-require-base t get-buffer-create "===============================================================================\n" nil message "Creating package list ..." sit-for 0 buffer-disable-undo erase-buffer kill-all-local-variables use-local-map list-packages-mode "Packages" "\nWarning: No download sites specified. Package index may be out of date.\n If you intend to install packages, specify download sites first.\n\n" " Latest Installed\n Package name Vers. Vers. Description\n" " Latest\n Package name Vers. Description\n" mapcar #<compiled-function ... "...(204)" ... 10> sort copy-sequence #<compiled-function ... "...(10)" ... 3> documentation set-buffer-modified-p pop-to-buffer delete-other-windows featurep menubar set-buffer-menubar add-submenu clear-message pui-display-keymap major-mode mode-name truncate-lines package-get-remote pui-list-verbose package-get-base pui-selected-packages pui-deleted-packages current-menubar mode-popup-menu] 6 ("/usr/local/xemacs-21.2-2001-01-25/lib/xemacs-21.2-b42/lisp/package-ui.elc" . 13405) nil>()
call-interactively(pui-list-packages)
Everything seems to work fine in a 21.1 XEmacs.
- vin
- 3 participants
- 3 comments
22.0 Release Status: Important news
23 years, 2 months
Stephen J. Turnbull
Stephen J. Turnbull
Ben's back from Brazil.
He proceeded to catch the flu as soon as he got back (for this he
lives in Arizona!?), and hasn't accomplished much since. However, his
neuro-muscular issues seem to continue under control, and perhaps to
improve. He expects to be able to work with pretty good efficiency.
His plan at present is to have a version of his Mule on Windows work
that builds and maybe runs on a branch in CVS by February 1. Code
complete on March 1. This will miss the release target by a mile. So
I'm going to hope for miracles, but am expecting to have to scratch
the Mule/NT stuff from the release. Ben agrees with this assessment,
and also opposes delaying the release.
I propose we start looking for a Release Manager for 22.2, with
tentative target date September 1, immediately. This was always my
plan, but Ben insists that he will complete this project by mid 2d
quarter. That means that we'll have
o a well-tested major feature, plus (I hope)
o various smaller projects, and
o work building on the widgets, GTK, and custom themes
for release late 3rd quarter. (Aside to Jan V: I haven't yet updated
the release status page concerning themes.)
Vin, Martin:
When should we open the 21.5 development branch? (My proposal is to
rename it to 22.1 when we're sure that the current release will be
22.0.) I have that tentatively scheduled for next week. Is that too
soon?
Do we know how to move the head of trunk to that branch? When should
we do that?
Note: this is separate from the Ben and Bill branchs for Mule/NT and
GTK respectively.
--
University of Tsukuba Tennodai 1-1-1 Tsukuba 305-8573 JAPAN
Institute of Policy and Planning Sciences Tel/fax: +81 (298) 53-5091
_________________ _________________ _________________ _________________
What are those straight lines for? "XEmacs rules."
- 9 participants
- 18 comments
Another progress gauge (maybe general widget?) issue
23 years, 2 months
Stephen J. Turnbull
Stephen J. Turnbull
I've switched my daily-use XEmacs over to 21.2, and observed that the
progress bar seems to update the whole widget, including text, every
time the bar is extended. (XEmacs is running on a relatively slow,
loaded machine, across a 10Mbps LAN, and the local X server is XF86
4.0, which seems to have some slow painting issues on my workstation.)
This is not what I would call widget-like behavior, because there
should be no exposes being generated: the widget is the top window in
the stack.
Is this a problem with Falk's progress bar widget, or with XEmacs?
The buffer tabs widget may have similar behavior in the sense that the
whole thing often gets redrawn just because I change messages in VM
(but this may be associated with VM's use of a presentation buffer
separate from the folder buffer---it may very well be that the buffer
list gets "dirtied" from the point of view of the buffers tabs).
OTOH, the tabs widget often seems to be already on screen while the
rest of the frame gets redrawn.
uname -a: Linux turnbull 2.2.18pre2 #1 Mon Sep 4 19:28:49 JST 2000 i586 unknown
/coda/Projects/XEmacs/21.2-HEAD/configure '--srcdir=/coda/Projects/XEmacs/21.2-HEAD' '--prefix=/playpen/gnu' '--exec-prefix=/playpen/gnu/plat' '--with-mule' '--with-xim=xlib' '--with-xfs'
XEmacs 21.2-b42 "Poseidon" configured for `i586-pc-linux'.
Compilation / Installation:
Source code location: /coda/Projects/XEmacs/21.2-HEAD
Installation prefix: /playpen/gnu
Operating system description file: `s/linux.h'
Machine description file: `m/intel386.h'
Compiler: gcc -g -O3 -Wall -Wno-switch -Wpointer-arith -Winline -Wmissing-prototypes -Wshadow
Relocating allocator for buffers: no
GNU version of malloc: yes
- Using Doug Lea's new malloc from the GNU C Library.
Window System:
Compiling in support for the X window system:
- X Windows headers location: /usr/X11R6/include
- X Windows libraries location: /usr/X11R6/lib
- Handling WM_COMMAND properly.
Compiling in support for the Athena widget set:
- Athena headers location: X11/Xaw
- Athena library to link: Xaw
Using Lucid menubars.
Using Lucid scrollbars.
Using Athena dialog boxes.
Using Athena native widgets.
TTY:
Compiling in support for ncurses.
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Compiling in support for X-Face message headers.
Sound:
Compiling in support for sound (native).
Databases:
Compiling in support for Berkeley database.
Internationalization:
Compiling in support for Mule (multi-lingual Emacs).
Compiling in support for XIM (X11R5+ I18N input method).
- Using raw Xlib to provide XIM support.
- Using XFontSet to provide bilingual menubar.
Compiling in support for Canna on Mule.
Mail:
Compiling in support for "dot-locking" mail spool file locking method.
Other Features:
Compiling in support for dynamic shared object modules.
Compiling in support for extra debugging code.
WARNING: ---------------------------------------------------------
WARNING: Compiling in support for runtime error checking.
WARNING: XEmacs will run noticeably more slowly as a result.
WARNING: Error checking is on by default for XEmacs beta releases.
WARNING: ---------------------------------------------------------
--
University of Tsukuba Tennodai 1-1-1 Tsukuba 305-8573 JAPAN
Institute of Policy and Planning Sciences Tel/fax: +81 (298) 53-5091
_________________ _________________ _________________ _________________
What are those straight lines for? "XEmacs rules."
- 3 participants
- 3 comments