November 1998 - XEmacs-Beta - XEmacs Mailing List Archives

Re: New release of toolbar-fancy package 25 years, 6 months

Adrian Aichner

>>>>> "Jan" == Jan Vroonhof <vroonhof(a)math.ethz.ch> writes: Jan> Adrian Aichner <aichner(a)ecf.teradyne.com> writes: >> with the 'next icons visible, Jan> In the frame where the fancy icons do not show up (that was Jan> your first frame wasn't it?) could you try using Jan> Options->Toolbar Appearance-> Default Locations and playing with the settings. Say Appearance-> change it to bottom and then back to top. Yup. After changing Options->Toolbar Appearance->Default Locations from the selected Top to Bottom the 'next toolbar icons show up at the bottom (below the minibuffer). What gives? Best regards, Adrian Jan> Do the icons appear in the process? Jan> Jan -- Adrian Aichner European Design Center Teradyne GmbH Semiconductor Test Group Telephone +49/89/41861(0)-208 Dingolfinger Strasse 2 Fax +49/89/41861-217 (What is a Fax?) D-81673 MUENCHEN E-mail adrian.aichner(a)teradyne.com

1 participants
0 comments

Re: New release of toolbar-fancy package 25 years, 6 months

Jan Vroonhof

Adrian Aichner <aichner(a)ecf.teradyne.com> writes: > with the 'next icons visible, In the frame where the fancy icons do not show up (that was your first frame wasn't it?) could you try using Options->Toolbar Appearance->Default Locations and playing with the settings. Say Appearance->change it to bottom and then back to top. Do the icons appear in the process? Jan

1 participants
0 comments

Mailcrypt and GPG 25 years, 6 months

Rebecca Ore

I've built mailcrypt-3.5b7 and added these lines to my .emacs file: (load-library "/usr/local/share/emacs/site-lisp/mailcrypt") (setq mc-setversion "gnp") (require 'mailcrypt "/usr/local/share/emacs/site-lisp/") (autoload 'mc-install-write-mode "mailcrypt" nil t) (autoload 'mc-install-read-mode "mailcrypt" nil t) (add-hook 'mail-mode-hook 'mc-install-write-mode) When I try to gpg sign messages, I get the error message "Cannot open load file: mc-toplev" Has anyone else had any experience with this? I built the package from the latest tarball and used EMACS=xemacs ./configure and changed the load path to /usr/local/lib/xemacs/packages. Step by step, please. -- Rebecca Ore

1 participants
0 comments

Re: New release of toolbar-fancy package 25 years, 6 months

Adrian Aichner

>>>>> "Jan" == Jan Vroonhof <vroonhof(a)math.ethz.ch> writes: Jan> Adrian Aichner <aichner(a)ecf.teradyne.com> writes: Jan> Does (specifier-instance current-toolbar) look OK? Jan> Oops, I meant (specifier-instance default-toolbar). May be Hello Jan, with the 'next icons visible, I get this, when evaluating in the *scratch* buffer (processed by fill-paragraph-or-region): (specifier-instance default-toolbar) ([toolbar-file-icon toolbar-open t "Open a file"] [toolbar-folder-icon toolbar-dired t "Edit a directory"] [toolbar-disk-icon toolbar-save t "Save buffer"] [toolbar-printer-icon toolbar-print t "Print buffer"] [toolbar-cut-icon toolbar-cut t "Kill region"] [toolbar-copy-icon toolbar-copy t "Copy region"] [toolbar-paste-icon toolbar-paste t "Paste from clipboard"] [toolbar-undo-icon toolbar-undo t "Undo edit"] [toolbar-spell-icon toolbar-ispell t "Check spelling"] [toolbar-replace-icon toolbar-replace t "Search & Replace"] [toolbar-mail-icon toolbar-mail t "Read mail"] [toolbar-info-icon toolbar-info t "Info documentation"] [toolbar-compile-icon toolbar-compile t "Start a compilation"] [toolbar-debug-icon toolbar-debug t "Start a debugger"] [toolbar-news-icon toolbar-news t "Read news"]) (specifier-instance top-toolbar) ([toolbar-file-icon toolbar-open t "Open a file"] [toolbar-folder-icon toolbar-dired t "Edit a directory"] [toolbar-disk-icon toolbar-save t "Save buffer"] [toolbar-printer-icon toolbar-print t "Print buffer"] [toolbar-cut-icon toolbar-cut t "Kill region"] [toolbar-copy-icon toolbar-copy t "Copy region"] [toolbar-paste-icon toolbar-paste t "Paste from clipboard"] [toolbar-undo-icon toolbar-undo t "Undo edit"] [toolbar-spell-icon toolbar-ispell t "Check spelling"] [toolbar-replace-icon toolbar-replace t "Search & Replace"] [toolbar-mail-icon toolbar-mail t "Read mail"] [toolbar-info-icon toolbar-info t "Info documentation"] [toolbar-compile-icon toolbar-compile t "Start a compilation"] [toolbar-debug-icon toolbar-debug t "Start a debugger"] [toolbar-news-icon toolbar-news t "Read news"]) Regards, Adrian Jan> try the same for (specifier-instance top-toolbar). Maybe on Jan> windows the top-toolbar has been changed to overide the Jan> default-toolbar value. Jan> Jan -- Adrian Aichner European Design Center Teradyne GmbH Semiconductor Test Group Telephone +49/89/41861(0)-208 Dingolfinger Strasse 2 Fax +49/89/41861-217 (What is a Fax?) D-81673 MUENCHEN E-mail adrian.aichner(a)teradyne.com

1 participants
0 comments

[BUG] with non-ascii characters in dir names 25 years, 6 months

Didier Verna

A student reported here that `M-x compile' fails when the directory name contains non ascii stuff. I've tried it myself and tracked it down a bit and it seems that the fuckage occurs when getting the string with XSTRING_DATA. I seem to get \201 characters just before all non ascii ones so I guess the process gets a bogus directory. I'm not very familiar with the coding system stuff. Any ideas how to fix this ? -- / / _ _ Didier Verna http://www.inf.enst.fr/~verna/ - / / - / / /_/ / E.N.S.T. INF C201.1 mailto:verna＠inf.enst.fr /_/ / /_/ / /__ / 46 rue Barrault Tel. (33) 01 45 81 73 46 75634 Paris cedex 13 Fax. (33) 01 45 81 31 19

1 participants
0 comments

Re: New release of toolbar-fancy package 25 years, 6 months

Jan Vroonhof

Adrian Aichner <aichner(a)ecf.teradyne.com> writes: > Jan> Does (specifier-instance current-toolbar) look OK? Oops, I meant (specifier-instance default-toolbar). May be try the same for (specifier-instance top-toolbar). Maybe on windows the top-toolbar has been changed to overide the default-toolbar value. Jan

1 participants
0 comments

Emacs book opportunity 25 years, 6 months

gganser＠mcp.com

Hello, I am an acquisitions editor with Macmillan Publishing in Indianapolis, Indiana, and I am actively recruiting writers for a beginner/intermediate level Emacs book. I am interested in finding writers who can either act as the lead author for this project or contribute one or more chapters -- writers who have a thorough knowledge of Emacs and the ability to translate that knowledge to new users. If you are interested in learning more about this project, please contact me as soon as possible. If you know someone who you think might be qualified and/or interested in writing, I would appreciate it if you could forward this message or pass along their contact information. Best regards, Gretchen Ganser Acquisitions Editor MACMILLAN PUBLISHING USA ph: 800-545-5914 fax: 317-817-7924 e-mail: gganser(a)mcp.com

1 participants
0 comments

SunOS 5.7 64-bit Xemacs build report 25 years, 6 months

greg+usenet＠cheers.Bungi.COM

Gunnar Evermann asked me to send this here... this was actually built in mid-September back when egcs actually produced fairly good 64-bit SPARC code. The current egcs doesn't. Cheers!greg uname -a: SunOS x-files 5.7 exodus-1998/09/06 sun4u sparc SUNW,Ultra-60 ./configure '--prefix=/pkg/v9' '--with-x' '--with-xpm' '--dynamic' '--x-includes=/usr/openwin/include' '--site-includes=/usr/dt/include /pkg/v9/include' '--x-libraries=/usr/openwin/lib/sparcv9' '--site-libraries=/usr/dt/lib/sparcv9 /pkg/v9/lib' '--without-sound' '--with-gcc' '--cflags=-O2 -mtune=ultrasparc' '--infopath=/pkg/gnu/info:/pkg/local/info:/pkg/tetex/info' '--with-tooltalk=yes' '--with-cde=yes' '--package-path=/pkg/gnu/lib/xemacs/packages' XEmacs 21.0 "Irish Goat" configured for `sparc-sun-solaris2.7'. Where should the build process find the source code? /pkg/src/v9/xemacs-21.0-b55 What installation prefix should install use? /pkg/v9 What operating system and machine description files should XEmacs use? `s/sol2.h' and `m/sparc.h' What compiler should XEmacs be built with? gcc -O2 -mtune=ultrasparc Should XEmacs use the GNU version of malloc? yes Should XEmacs use the relocating allocator for buffers? yes What window system should XEmacs use? x11 Where do we find X Windows header files? /usr/dt/include /usr/openwin/include Where do we find X Windows libraries? /usr/dt/lib /usr/openwin/lib/sparcv9 Additional header files: /usr/dt/include /pkg/v9/include Additional libraries: /usr/dt/lib/sparcv9 /pkg/v9/lib Runtime library search path: /usr/lib/sparcv9:/usr/dt/lib/sparcv9:/pkg/v9/lib:/usr/ccs/lib:/usr/dt/lib:/usr/openwin/lib/sparcv9:/usr/ccs/lib/sparcv9 Compiling in support for XPM images. Compiling in support for PNG image handling. Compiling in support for (builtin) GIF image handling. Compiling in support for JPEG image handling. Compiling in support for TIFF image handling. Compiling in support for GNU DBM. Compiling in support for CDE. Compiling in support for ToolTalk. Compiling in EXPERIMENTAL support for Drag'n'Drop ( CDE ). Compiling in support for proper session-management. Using Lucid menubars. Using Lucid scrollbars. Using Motif dialog boxes. Compiling in DLL support. movemail will use "dot-locking" for locking mail spool files.

1 participants
0 comments

Re: Meta-c 25 years, 6 months

Greg Klanderman

>>>>> "Devon" == Devon Sean McCullough <devon(a)iac.net> writes: Devon> I typed Meta-Minus Meta-C in the minibuffer prompt for Devon> string-rectangle expecting to capitalize the previous word Devon> I had typed. Looks like region-active-p in simple.el needs to return whether the region is active *in the current buffer*. I'm not sure how to determine that. The function zmacs-region-buffer may be useful, though it is commented as being kludgy. greg

1 participants
0 comments

Re: New release of toolbar-fancy package 25 years, 6 months

Adrian Aichner

>>>>> "Adrian" == Adrian Aichner <aichner(a)ecf.teradyne.com> writes: >>>>> "Jan" == Jan Vroonhof <vroonhof(a)math.ethz.ch> writes: Jan> Adrian Aichner <aichner(a)ecf.teradyne.com> writes: Jan> :file Jan> Adrian> "c:\\PROGRA~1\\XEMACS\\xemacs-packages\\etc\\toolbar-fancy\\color-mail-up.x Jan> pm" ...]) Jan> This seems OK. >>> The initial frame has the standard icons. Only new frames I >>> open have the fancy toolbar. Jan> Maybe there is a problem with specifiers and/or the Windows Jan> redisplay code. Jan> Does (specifier-instance current-toolbar) look OK? Adrian> I don't have the fancy toolbar with me at the moment. Adrian> I'll report later. Jan, (specifier-instance current-toolbar) leads Symbol's value as variable is void: current-toolbar in (emacs-version) "XEmacs 21.0 \"Pyrenean-pre6\" [Lucid] (i386-pc-win32) of Wed Nov 11 1998 on DARTER2" on system-type windows-nt. Adrian Jan> Maybe the windows code does not notice that the toolbar has Jan> changed? Does code that changes the toolbar like gnus, info Jan> etc work for you when not operning a new frame. Adrian> Yes it works fine. Jan> Jan Adrian> -- Adrian Aichner European Design Center Teradyne GmbH Adrian> Semiconductor Test Group Telephone +49/89/41861(0)-208 Adrian> Dingolfinger Strasse 2 Fax +49/89/41861-217 D-81673 Adrian> MUENCHEN E-mail adrian.aichner(a)teradyne.com -- Adrian Aichner European Design Center Teradyne GmbH Semiconductor Test Group Telephone +49/89/41861(0)-208 Dingolfinger Strasse 2 Fax +49/89/41861-217 (What is a Fax?) D-81673 MUENCHEN E-mail adrian.aichner(a)teradyne.com

1 participants
0 comments

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta November 1998