October 2001 - XEmacs-Beta - XEmacs Mailing List Archives

Re: revert-buffer and font-lock-mode 23 years

Andy Piper

This patch makes things subtantially better for me. I would be grateful if interested parties could give it a try. Thanks andy

1 participants
0 comments

Re: font-lock and revert buffer. 23 years

Mike FABIAN

Andy Piper <andyp(a)bea.com> writes: > The sccs I use has a locking model so files on disk are usually > read-only but if you check them out they are unchanged (you get the > same version you are looking at) but read-write. The emacs integration > I use calls (revert-buffer t t) after checkout to get the file up to > date, but this is an incredible amount of wasted work (and slow) > because the whole buffer is fontified from scratch, JDE reparses the > buffer, etc, etc - when actually the file is totally unchanged apart > from the permissions. > > > It seems like revert-buffer should recognize this as a special case > and simply change the permissions etc in XEmacs. Anyone have any > comments, opinions or suggestions on this? I see the same problem with CVS. With huge files this can be quite frustrating. Especially when comitting a lot of files at the same time with PCS-CVS, they all get re-fontified and my XEmacs may be busy for several minutes. -- Mike Fabian <mfabian(a)suse.de> http://www.suse.de/~mfabian 睡眠不足はいい仕事の敵だ。

1 participants
0 comments

Emacs/W3 needs DEVELOPERS... 23 years

William M. Perry

The following message is a courtesy copy of an article that has been posted to comp.emacs.xemacs,comp.emacs,alt.religion.emacs as well. This is my semi-annual plea for help maintaining Emacs/W3, the web browser and URL library for Emacs. I have not had the time for quite a while to work on it, and need people who can take on bits and pieces that can then be glued into a full blown web browser, or reused by Gnus for its web-based backends, etc. For details, please see: http://www.gnu.org/software/w3/ http://savannah.gnu.org/projects/w3/ http://savannah.gnu.org/projects/url/ A short list of projects needing a maintainer: - XML parser implementation - HTML parser rewrite (PSGML?) - DOM implementation sitting on top of XML & HTML parsers - CSS level 2 stylesheet parser - Rendering engine (would just work off of a DOM tree and CSS2 stylesheet). There is room for more than one - a lightweight one that would be really fast for Gnus & VM to use, and perhaps a `real' one for use as an honest-to-god browser. Each of these is a fairly manageable task, but all of them is just too large for one person to keep doing. -bp -- Ceterum censeo vi esse delendam

2 participants
2 comments

Solaris 21.4.5 compile problems 23 years

Scott RoLanD

SunOS 5.7 gcc version 2.95.3 I am not root, so I configure with --prefix, --exec-prefix and set LDFLAGS to help point to libraries I have installed. I had the following issues when I tried to compile 21.4.5: First, when I did configure it failed. After looking into I discovered that it was trying to build in ToolTalk but had encountered this problem: ld.so.1: ./conftest: fatal: libtt.so.2: open failed: No such file or directory I got around that by explicitly adding "-L/usr/openwin/lib -R/usr/openwin/lib" to my LDFLAGS setting. Then it configured fine and got most of the way through building until it failed with this: Dumping under the name xemacs unexec(): dldump(/adc_local_apps/ut/export/sparc-sun-solaris2.7/t/xemacs/21.4.5/distrib/src/xemacs): ld.so.1: ./temacs: fatal: /adc_local_apps/ut/export/sparc-sun-solaris2.7/t/xemacs/21.4.5/distrib/src/xemacs: unknown dynamic entry: 1879048176 Any ideas? TIA -- Scott RoLanD http://www.chat.net/~shr/

4 participants
7 comments

font-lock and revert buffer. 23 years

Andy Piper

The sccs I use has a locking model so files on disk are usually read-only but if you check them out they are unchanged (you get the same version you are looking at) but read-write. The emacs integration I use calls (revert-buffer t t) after checkout to get the file up to date, but this is an incredible amount of wasted work (and slow) because the whole buffer is fontified from scratch, JDE reparses the buffer, etc, etc - when actually the file is totally unchanged apart from the permissions. It seems like revert-buffer should recognize this as a special case and simply change the permissions etc in XEmacs. Anyone have any comments, opinions or suggestions on this? Does Emacs do anything different to us? Thanks andy

1 participants
0 comments

RE: XEmacs 21.4.5 'Civil Service' is released. 23 years

Matthew Eldridge

Hi. First off, either the mailing list gateway, or perhaps your mail client, jammed an extra carraige-return between the wrapped lines of your X-Face header. Thus the start of the message (which is separated from the headers by the first blank line) was found after the first X-Face line, which really upset my fetchmail daemon. Anybody know where this bug is coming from? As for my difficulties with the netinstaller, it failed for me this morning with ftp.xemacs.org, and it barfed last week with ftp.sunsite.utk.edu (or something close to that) and ftp.stealth.org. I'm happy to provide any more detailed feedback. I've attached "setup.log.full" from my most recent failed attempt. Thanks, -Matthew > -----Original Message----- > From: > Sent: None > To: Matthew Eldridge > Cc: xemacs-beta(a)xemacs.org; Andy Piper > Subject: Re: XEmacs 21.4.5 'Civil Service' is released. > > > c/qi;YLwRmEbt8Y*=j5n(urqY＠chPh＠J'D"QlqD!C8>*}#kYF[-tYl3VZga/HSOP|K,{L > > Rtu＠f0y/=O&Cu}\:~d|P$JON?pn?j,&CnPb1z#/TL9bkAJwyol&a:SvYj-VYbM=Dtxhk9 > > =w|R6U3_;SH&B<Mfy6Q%# > X-Attribution: APA > From: Adrian.Aichner(a)t-online.de (Adrian Aichner) > Organization: The XEmacs Project > Date: 29 Oct 2001 19:40:41 +0100 > In-Reply-To: <15325.37541.508938.2012(a)hp4.t-ram.com> > Message-ID: <n12ae1cm.fsf(a)ecf.teradyne.com> > Lines: 84 > User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.4 (Civil > Service (candidate 1)) > MIME-Version: 1.0 > Content-Type: text/plain; charset=us-ascii > X-Sender: 520002458184-0001(a)t-dialin.net > Return-Path: Adrian.Aichner(a)t-online.de > X-OriginalArrivalTime: 29 Oct 2001 18:40:39.0384 (UTC) > FILETIME=[34C04580:01C160A9] > > >>>>> "Matthew" == Matthew Eldridge <eldridge(a)t-ram.com> writes: > > Hi Matthew! > > Matthew> Andy Piper writes: > >> * XEmacs 21.4.5 "Civil Service (Windows)" is released. "Civil > >> Service (Windows)" is the sixth in the OXYMORON series. > >> > >> The binaries for both cygwin and native MS-Windows are > >> available via the XEmacs netinstaller which can be found at > >> http://www.xemacs.org/Download/win32/setup.exe This version of > >> the installer is 1.2.2.11.2.3. > > Matthew> The idea of a netinstaller is nice. Unfortunately, to > Matthew> really work well the download process has to be an > Matthew> absolute rock. Since XEmacs isn't a microsoft product, > Matthew> and nobody is paying for huge gobs of bandwidth from > Matthew> conxion or akamai or anybody else to provide excellent > Matthew> accessibility, the net installer tends to fall flat on > Matthew> its face. > > People on xemacs-beta: Please report successful installations via > netinstaller. > > It has worked nicely for me a while ago. > > Matthew> First it starts by giving me a list of 50 places to do > Matthew> the download from. I have *no* idea which of them are > Matthew> topologically close to me, likely to offer a fast > Matthew> download, etc. So I get out a ping tool and hunt around > Matthew> see what it looks like I've got a good connection to. > Matthew> Then I bravely tell the netinstaller the site I've > Matthew> chosen. > > Matthew> It then grinds for a little before presenting me with a > Matthew> list of packages. I can't tell if "all" is selected by > Matthew> default, but I guess that it is. There's no "Select All" > Matthew> button, so I hit "next" and proceed. > > Matthew> The netinstaller then throws up a dialog box informing me > Matthew> it can't find a package (ada support I think). So I hit > Matthew> the "okay" button. Then it tells me it can't find > Matthew> another package (auctex I think), so I hit the okay > Matthew> button. And this continues, ad infinitum, ad nauseum. > > What's the site you have chosen? > > Matthew> Given this irritation, I'd like to make a request. All I > Matthew> want to be able to do is connect to a site (or one of 50 > Matthew> sites, whatever) with either http or ftp, and download a > Matthew> single big honking file (probably 30MB or thereabouts) > Matthew> which is a self-contained installer for *everything*. I > Matthew> can spare the extra 20MB of disk space for the features > Matthew> I'll never use or even know exist. And this would > Matthew> eliminate the netinstaller which, at least for me, has > Matthew> thus far never worked. > > How often/when has you tried? > > Matthew> After all that ranting, I'd like to say that XEmacs is > Matthew> tremendous, and I'm extremely thankful that people care > Matthew> enough to make the large effort so that it runs natively > Matthew> on windows. > > We depend heavily on detailed technical feedback. > > That's the way you "pay" for your XEmacs. > > Best regards, > > Adrian > > Matthew> Thanks, > > Matthew> -Matthew > > Matthew> -- > Matthew> Matthew Eldridge, 408/453-8726 x206 > > > -- > Adrian Aichner > mailto:adrian＠xemacs.org > http://www.xemacs.org/ > >

8 participants
12 comments

segm fault: file in another folder 23 years

Bart Alberti

in xterm window in /home/user > xemacs essay11.tex Freeze of program and I got segmentation fault in Xemacs (see attached spec sheet) core: file not found but GNU gdb 5.0 gives (gdb) where (gdb) No stack. (gdb) quit Lisp backtrace was # (condition-case ... . error) # (catch top-level ...) Message: Terminate mini buffer with ^] which I did; CRASH! But of course my TEX file was in /home/user/docs! But all the other editors simply open and give one a chance to find the missing file by going to the correct folder. Why do you crash? You need only say "file not found." Then continue with a blank page as a new document. No other word processor or editor does this; at least not in the commercial world. Bart Alberti bart(a)solozone.com Attactment: Help-Installation uname -a: Linux knuth 2.4.3 #1 Mon Feb 5 17:56:44 GMT 2001 i686 unknown ./configure 'i386-suse-linux' '--with-gnu-make' '--with-gcc' '--dynamic' '--rel-alloc' '--debug=no' '--error-checking=none' '--const-is-losing=no' '--cflags=-O2 -m486 -mcpu=i486 -march=i486 -Wall -Wno-switch -pipe -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2' '--ldflags=-s' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/X11R6/bin' '--datadir=/usr/share' '--archlibdir=/usr/lib/xemacs/21.1.14/i386-suse-linux' '--docdir=/usr/lib/xemacs/21.1.14/i386-suse-linux' '--lispdir=/usr/share/xemacs/21.1.14/lisp' '--pkgdir=/usr/share/xemacs/21.1.14/lisp' '--etcdir=/usr/share/xemacs/21.1.14/etc' '--statedir=/var/state/xemacs' '--lockdir=/var/state/xemacs/lock' '--infodir=/usr/share/xemacs/info' '--mandir=/usr/share/man/man1' '--with-sound=native' '--with-database=gnudbm,berkdb' '--with-ncurses' '--with-tty=yes' '--with-gpm' '--with-site-lisp' '--with-xpm' '--with-gif' '--with-tiff' '--with-jpeg' '--with-png' '--with-x' '--with-session=yes' '--with-menubars=lucid' '--with-scrollbars=lucid' '--with-dialogs=athena3d' '--x-includes=/usr/X11R6/include' '--x-libraries=/usr/X11R6/lib' '--with-mule' '--with-xim=xlib' '--with-xfs' '--with-clash-detection' '--with-ldap' '--with-pop' XEmacs 21.1.14 "Cuyahoga Valley" configured for `i386-suse-linux'. Where should the build process find the source code? /usr/src/packages/BUILD/xemacs-21.1.14 What installation prefix should install use? /usr What operating system and machine description files should XEmacs use? `s/linux.h' and `m/intel386.h' What compiler should XEmacs be built with? gcc -O2 -m486 -mcpu=i486 -march=i486 -Wall -Wno-switch -pipe -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 Should XEmacs use the GNU version of malloc? yes (Using Doug Lea's new malloc from the GNU C Library.) Should XEmacs use the relocating allocator for buffers? yes What window system should XEmacs use? x11 Where do we find X Windows header files? /usr/X11R6/include Where do we find X Windows libraries? /usr/X11R6/lib Compiling in support for XAUTH. Compiling in support for XPM images. Compiling in support for PNG image handling. Compiling in support for (builtin) GIF image handling. Compiling in support for JPEG image handling. Compiling in support for TIFF image handling. Compiling in support for X-Face message headers. Compiling in native sound support. Compiling in support for Berkeley DB. Compiling in support for GNU DBM. Compiling in support for LDAP. Compiling in support for ncurses. Compiling in support for GPM (General Purpose Mouse). Compiling in Mule (multi-lingual) support. Compiling in XIM (X11R5+ I18N input method) support. Using raw Xlib to provide XIM support. Using XFontSet to provide bilingual menubar. Compiling in support for Canna on Mule. Compiling in support for the WNN input method on Mule. Compiling in support for proper session-management. Using Lucid menubars. Using Lucid scrollbars. Using Athena-3d dialog boxes. Compiling in DLL support. Clash detection will use "/var/state/xemacs/lock" for locking files. movemail will use "dot-locking" for locking mail spool files. Using POP for mail access Using Lisp_Objects with minimal tagbits.

3 participants
2 comments

21.4.5 netinstaller buglet 23 years

Darryl Okahata

Here's a minor netinstaller buglet: when installing packages, the extracted file names appear to be word-wrapped and "truncated" (at least, I *think* it's supposed to be the "extracted file name" -- it's difficult to tell from the truncation). I've attached a small gif file showing the problem. All you see is "C:\Program", with some pixel dust below (from the truncated fonts), whereas the complete path is something like "C:\Program Files\XEmacs\XEmacs-21.4.5\...". -- Darryl Okahata darrylo(a)soco.agilent.com DISCLAIMER: this message is the author's personal opinion and does not constitute the support, opinion, or policy of Agilent Technologies, or of the little green men that have been following him all day.

3 participants
2 comments

dumps core on exit 23 years

David Boldt

This bug report will be sent to the XEmacs Development Team, not to your local site managers!! Please write in English, because the XEmacs maintainers do not have translators to read other languages for them. Please describe as succinctly as possible: - What happened. - What you thought should have happened. - Precisely what you were doing at the time. Please also include any C or lisp back-traces that you may have. ================================================================ Dear Bug Team! Xemacs 21.4.5 on Solaris 2.6 dumping core on exit. (X display is not Solaris, re: PROBLEMS) was editing html doc (psgml). Lisp backtrace follows: kill-emacs() # bind (arg) save-buffers-kill-emacs(nil) # bind (command-debug-status) call-interactively(save-buffers-kill-emacs) # (condition-case ... . error) # (catch top-level ...) % gdb /usr/opt/bin/xemacs core GNU gdb 4.17 Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "sparc-sun-solaris2.6"... (no debugging symbols found)... warning: core file may not match specified executable file. Core was generated by `xemacs xemacs-beta.html'. Program terminated with signal 10, Bus Error. Reading symbols from /usr/dt/lib/libXm.so.3...(no debugging symbols found)... done. Reading symbols from /usr/local/lib/libpng.so.2... (no debugging symbols found)...done. Reading symbols from /usr/local/lib/libz.so...done. Reading symbols from /usr/local/lib/libXpm.so.4.11...done. Reading symbols from /usr/openwin/lib/libtt.so.2...done. Reading symbols from /usr/openwin/lib/libXmu.so.4...done. Reading symbols from /usr/openwin/lib/libXt.so.4...done. Reading symbols from /usr/openwin/lib/libXext.so.0...done. Reading symbols from /usr/openwin/lib/libX11.so.4...done. Reading symbols from /usr/openwin/lib/libSM.so.6...done. Reading symbols from /usr/openwin/lib/libICE.so.6...done. Reading symbols from /usr/local/lib/libgdbm.so.2...done. Reading symbols from /usr/lib/libkvm.so.1...done. Reading symbols from /usr/lib/libkstat.so.1...done. Reading symbols from /usr/lib/libm.so.1...done. Reading symbols from /usr/lib/libsocket.so.1...done. Reading symbols from /usr/lib/libnsl.so.1...done. Reading symbols from /usr/lib/libelf.so.1...done. Reading symbols from /usr/lib/libdl.so.1...done. Reading symbols from /usr/lib/libc.so.1...done. Reading symbols from /usr/lib/libmp.so.2...done. ---Type <return> to continue, or q <return> to quit--- Reading symbols from /usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1...done. #0 0xef10878c in _libc_kill () (gdb) where #0 0xef10878c in _libc_kill () #1 0x7cbdc in fatal_error_signal () #2 <signal handler called> #3 0xef6cd708 in RemoveMatchingEntries () #4 0xef68040c in _XmEnumerateHashTable () #5 0xef6cd848 in CleanupOnDisplayClose () #6 0xef41f9a4 in XtCallCallbackList () #7 0xef428208 in XtPhase2Destroy () #8 0xef428420 in _XtDoPhase2Destroy () #9 0xef428630 in XtDestroyWidget () #10 0x15e890 in get_device_from_display () #11 0x6e8cc in delete_device_internal () #12 0x65b28 in delete_console_internal () #13 0x7ecc8 in Fkill_emacs () #14 0x856e4 in Ffuncall () #15 0x5a674 in funcall_compiled_function () #16 0x5a2cc in funcall_compiled_function () #17 0x858c4 in Ffuncall () #18 0x5f4c0 in Fcall_interactively () #19 0x85710 in Ffuncall () #20 0x88ed0 in call1 () #21 0xb0f10 in Fset_recent_keys_ring_size () #22 0xb1688 in Fdispatch_event () #23 0x641d0 in Fcommand_loop_1 () #24 0x64438 in call_command_loop () #25 0x818f8 in condition_case_1 () #26 0x645a8 in Freally_early_error_handler () #27 0x89718 in internal_catch () #28 0x63d7c in initial_command_loop () #29 0x7e550 in xemacs_21_4_5_sparc_sun_solaris2_6 () #30 0x8017c in main () (gdb) quit ================================================================ System Info to help track down your bug: --------------------------------------- uname -a: SunOS cycad 5.6 Generic_105181-22 sun4u sparc SUNW,Ultra-2 ./configure '--with-site-lisp=yes' XEmacs 21.4.5 "Civil Service" configured for `sparc-sun-solaris2.6'. Compilation / Installation: Source code location: /usr/local/src/xemacs-21.4.5 Installation prefix: /usr/local Runtime library search path: /usr/dt/lib:/usr/openwin/lib:/usr/local/lib Operating system description file: `s/sol2.h' Machine description file: `m/sparc.h' Compiler: gcc -g -O3 -Wall -Wno-switch -Winline -Wmissing-prototypes -Wsign-compare -Wshadow -Wpointer-arith Relocating allocator for buffers: yes GNU version of malloc: yes Window System: Compiling in support for the X window system: - X Windows headers location: /usr/dt/include /usr/X11R6/include - X Windows libraries location: /usr/dt/lib /usr/openwin/lib - Handling WM_COMMAND properly. Using Lucid menubars. Using Lucid scrollbars. Using Motif dialog boxes. Using Motif native widgets. TTY: Images: Compiling in support for GIF images (builtin). Compiling in support for XPM images. Compiling in support for PNG images. Compiling in support for JPEG images. Sound: Compiling in support for sound (native). Databases: Compiling in support for Berkeley database. Compiling in support for GNU DBM. Internationalization: Mail: Compiling in support for "dot-locking" mail spool file locking method. Other Features: Compiling in support for ToolTalk. Compiling in support for dynamic shared object modules. Load-Path Lisp Shadows: ---------------------- nil Installed XEmacs Packages: ------------------------- ((xslt-process :version 1.05 :type regular) (xemacs-devel :version 1.38 :type single-file) (xemacs-base :version 1.55 :type regular) (w3 :version 1.2 :type regular) (vm :version 6.96 :type regular) (viper :version 1.28 :type regular) (view-process :version 1.11 :type regular) (vhdl :version 1.13 :type regular) (vc-cc :version 1.16 :type regular) (vc :version 1.28 :type regular) (tm :version 1.29 :type regular) (time :version 1.11 :type regular) (textools :version 1.12 :type regular) (text-modes :version 1.32 :type single-file) (texinfo :version 1.2 :type regular) (supercite :version 1.18 :type regular) (strokes :version 1.08 :type regular) (speedbar :version 1.21 :type regular) (sounds-au :version 1.1 :type regular) (slider :version 1.13 :type regular) (sh-script :version 1.13 :type regular) (sgml :version 1.08 :type regular) (semantic :version 1.1 :type regular) (scheme :version 1.11 :type regular) (rmail :version 1.12 :type regular) (reftex :version 1.23 :type regular) (psgml :version 1.23 :type regular) (ps-print-nomule :version 1.05 :type regular) (prog-modes :version 1 .42 :type single-file) (pcomplete :version 1.01 :type regular) (pcl-cvs :version 1.55 :type regular) (os-utils :version 1.25 :type single-file) (net-utils :version 1.23 :type single-file) (mh-e :version 1.13 :type regular) (mew :version 1.14 :type regular) (mailcrypt :version 2.09 :type regular) (mail-lib :version 1.39 :type regular) (jde :version 1.3 :type regular) (ispell :version 1.23 :type regular) (ilisp :version 1.19 :type regular) (igrep :version 1.08 :type regular) (idlwave :version 1.23 :type regular) (hm--html-menus :version 1.16 :type regular) (gnus :version 1.57 :type regular) (gnats :version 1.12 :type regular) (fsf-compat :version 1.09 :type single-file) (frame-icon :version 1.09 :type regular) (footnote :version 1.13 :type regular) (eudc :version 1.34 :type regular) (eterm :version 1.13 :type regular) (eshell :version 1.01 :type regular) (emerge :version 1.09 :type regular) (elib :version 1.08 :type single-file) (eieio :version 1.01 :type regular) (efs :version 1.26 :type regular) (edit-utils :version 1.7 :type single-file) (ediff :version 1.33 :type regular) (edebug :version 1.14 :type regular) (dired :version 1.11 :type regular) (dictionary :version 1.0 :type regular) (cc-mode :version 1.26 :type regular) (calendar :version 1.16 :type regular) (calc :version 1.17 :type regular) (c-support :version 1.16 :type single-file) (bbdb :version 1.16 :type regular) (auctex :version 1.25 :type regular) (apel :version 1.2 :type regular)) Features: -------- (mail-abbrevs xemacsbug shadow sendmail cus-face xslt-process-autoloads xemacs-devel-autoloads xemacs-base-autoloads w3-autoloads vm-autoloads viper-autoloads view-process-autoloads vhdl-autoloads vc-cc-autoloads vc-autoloads tm-autoloads time-autoloads textools-autoloads text-modes-autoloads texinfo-autoloads supercite-autoloads strokes-autoloads speedbar-autoloads sounds-au-autoloads slider-autoloads sh-script-autoloads sgml-autoloads semantic-autoloads scheme-autoloads rmail-autoloads reftex-autoloads psgml-autoloads ps-print-nomule-autoloads prog-modes-autoloads pcomplete-autoloads pcl-cvs-autoloads os-utils-autoloads net-utils-autoloads mh-e-autoloads mew-autoloads mailcrypt-autoloads mail-lib-autoloads jde-autoloads ispell-autoloads ilisp-autoloads igrep-autoloads idlwave-autoloads hm--html-menus-autoloads gnus-autoloads gnats-autoloads fsf-compat-autoloads frame-icon-autoloads footnote-autoloads eudc-autoloads eterm-autoloads eshell-autoloads emerge-autoloads elib-autoloads eieio-autoloads efs-autoloads edit-utils-autoloads ediff-autoloads edebug-autoloads dired-autoloads dictionary-autoloads cc-mode-autoloads calendar-autoloads calc-autoloads c-support-autoloads bbdb-autoloads auctex-autoloads apel-autoloads lisp-autoloads loadhist auto-show fontl-hooks x-iso8859-1 gutter-items menubar-items x-menubar mode-motion mouse itimer auto-save lisp-mode easymenu iso8859-1 page buff-menu lib-complete help-nomule cus-file derived frame text-props obsolete cus-start custom widget cl-extra mini-cl cl cl-19 packages backquote very-early-lisp tooltalk lucid-scrollbars cut-buffer lucid-menubars motif-dialogs x c-balloon-help tty-frames tty toolbar native-sound scrollbar unix-processes multicast network-streams subprocesses modules menu-accelerator-support menubar berkeley-db dbm md5 xemacs gutter png gif jpeg xpm xbm lisp-float-type usg-unix-v dialog devices window-system base64) Recent keystrokes: ----------------- misc-user Recent messages (most recent first): ----------------------------------- Parsing /home/dis/dboldt/.mailrc... Loading mail-abbrevs...done Loading mail-abbrevs... Loading xemacsbug...done Loading xemacsbug... Loading cus-face...done Loading cus-face...

1 participants
0 comments

Re: XEmacs Services Problem 23 years

David Boldt

worked like a charm!! thank you. I also had the suggestion for (setq-default interprogram-cut-function nil) (setq-default interprogram-paste-function nil) from Jeff, which also worked. what are the pros or cons of using either of these solutions? -- David Boldt <dboldt(a)usgs.gov> Andy Piper <andyp(a)bea.co To: dboldt(a)usgs.gov, m> xemacs-beta(a)xemacs.org cc: 10/26/01 Subject: Re: XEmacs Services Problem 05:33 PM At 05:12 PM 10/26/01 -0400, Dave Boldt wrote: >control-k is taking a full 2 seconds per invocation. >other tasks so far seem normal. > >Solaris 2.6, xemacs 21.4.5 > >I've moved my .emacs file out of the way ... no change. try (setq x-selection-strict-motif-ownership nil) andy

3 participants
2 comments

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta October 2001