September 2000 - XEmacs-Beta - XEmacs Mailing List Archives

set-charset-ccl-program 24 years, 2 months

Daiki Ueno

Hello, I read [1] while I tried to display Greek characters with a Unicode font. But in case the dimension of the charset is 1, it seems that the resulting code point 2 (R2) is not considered. (redisplay-x.c:separate_textual_runs is where to calculate the code point in the font.) This is what I did in unifont.el: (set-charset-registry 'greek-iso8859-7 "iso10646-1") (define-ccl-program ccl-encode-greek-iso8859-7-font `(0 ;; In: R0: greek-iso8859-7 (not checked) ;; R1: position code ;; Out: R1: font codepoint 1 ;; R2: font codepoint 2 [...] )) (set-charset-ccl-program 'greek-iso8859-7 ccl-encode-greek-iso8859-7-font) Footnotes: [1] http://www.m17n.org/ntakahas/npx/unifont.en.html Regards, -- Daiki Ueno

1 participants
1 comments

gnus + mailcrypt problems 24 years, 2 months

Neal D. Becker

I'm trying the current gnus and mailcrypt. There is some breakage. Test #1. C-x m. I'm in Message mode. Make a simple test message. From Mailcrypt menu, choose Sign Message. Send it. When I receive the message under gnus, the signature is not displayed. I have no way to know it's there! However, choosing verify sigature succeeds. Test #2. Just about the opposite result. C-x m. I'm in Message mode. Choose Message/Attach File as Mime. Attach a file. Again, Mailcrypt/Sign Message. Send. Now view under gnus. This time, the signature is visible. Good. Now try verify signature. It fails!

1 participants
0 comments

info good bye? 24 years, 2 months

Giacomo Boffi

i'll investigate further, but 1. i rebuilt xemacs from a CVS update this morning 2. i pressed the I button in the menubar 3. i got a completely empty top info directory i have debian potato, and hence a system directory (/usr/share/info) without a dir file, and another one (/usr/info) with a dir file that references files in the dir-less directory it's possible, and also probable, that i'm doing something wrong, but i'd like to hear your suggestions tia

1 participants
0 comments

bug: bold face 24 years, 2 months

Giacomo Boffi

i don't know if this is replicable, please try 1. open vm 2. change the default font size 3. observe that the line hilighted in the summary buffer retains the previous font size

1 participants
0 comments

Re: Help debugging 24 years, 2 months

Adrian Aichner

>>>>> "nbecker" == nbecker <nbecker(a)fred.net> writes: nbecker> The typo is in the current crypt.el at line 1320. Yes. Are you not on xemacs-beta? See also: http://www.xemacs.org/list-archives/xemacs-beta/200009/msg00107.html and http://www.xemacs.org/list-archives/xemacs-patches/200009/msg00039.html I haven't heard back from Steve Youngs yet. I could commit this, but Steve or Andreas will have to release a new os-utils XEmacs package to fix this. Meanwhile you can fix your local installation and byte-compile crypt.el, but I'm sure you know that. nbecker> -- Adrian Aichner <adrian(a)xemacs.org>

1 participants
0 comments

Re: Help debugging 24 years, 2 months

Neal D. Becker

The typo is in the current crypt.el at line 1320.

1 participants
0 comments

Re: old version of vc.el 24 years, 2 months

Adrian Aichner

>>>>> "Palle" == Palle Girgensohn <girgen(a)partitur.se> writes: Palle> Hi! Palle> It seems that the package version of vc.el (in package vc) is Palle> out of date. There is a function vc-resolve-conflicts in the Palle> newer versions ( at least the one distributed with emacs-20.7). Palle> This function is expected by pcl-cvs. Would it be possible to Palle> update the vc package. I am not an elisp hacker, or I would Palle> have sent you the patches ;-) Please provide your XEmacs package numbers of vc and pcl-cvs! Here are mine (Options -> Manage Packages -> List & Install): pcl-cvs 1.49 1.49 CVS frontend. vc 1.23 1.23 Version Control for Free systems. Hope this helps, Adrian Palle> Cheers, Palle> Palle Girgensohn Palle> -- Palle> Partitur Informationsteknik AB Palle> Wenner-Gren Center +46 8 566 280 02 Palle> 113 46 Stockholm +46 70 785 86 02 Palle> Sweden girgen(a)partitur.se -- Adrian Aichner <adrian(a)xemacs.org>

2 participants
1 comments

Pixel position from window-point? 24 years, 2 months

Darryl Okahata

Hi, OK, I've dug through the emacs-lisp manual and the source code, and I must be either blind or stupid (or both ;-). Given a (visible) point (i.e., "(point)") in a particular window, how does one get the corresponding pixel co-ordinates? Co-ordinates relative to either the window or the frame are welcome. Getting co-ordinates from a mouse event is trivial, but I want to get the co-ordinates of the cursor as I type. I'm writing yet another "mini IntelliSense" mode, and I need to find the rough pixel co-ordinates of the cursor, so that I can pop up a little help window next to it (similar to balloon-help). Thanks, -- Darryl Okahata darrylo(a)soco.agilent.com DISCLAIMER: this message is the author's personal opinion and does not constitute the support, opinion, or policy of Agilent Technologies, or of the little green men that have been following him all day.

2 participants
2 comments

progress gauge weirdness 24 years, 2 months

Jeff Miller

cvs updated the latest beta about an hour ago... no i have a vm session going, and at one point the progress gauge came up (fontifying) now I'm left with some odd remnants of the gauge as shown in the attachment this is redhat linux 6.1, pretty much just did a ./configure Jeff

4 participants
12 comments

Re: Help debugging 24 years, 2 months

Adrian Aichner

>>>>> "APA" == Adrian Aichner <aichner(a)ecf.teradyne.com> writes: OK, OK, I lied. Here's the culprit: cd c:\XEmacs\xemacs-packages\lisp\ find . -name "*.el" -exec grep -H "null-buffer-file-name" {} ; Compilation started at Thu Sep 14 23:23:06 2000 +0200 (W. Europe Daylight Time) ./os-utils/crypt.el: (if (and (not (null-buffer-file-name)) Will send a patch ... Adrian >>>>> "nbecker" == nbecker <nbecker(a)fred.net> writes: nbecker> Anyone have any clue what this is? nbecker> Value: "21.1 (patch 12) \"Channel Islands\" XEmacs Lucid" nbecker> Signaling: (void-function null-buffer-file-name) nbecker> signal(void-function (null-buffer-file-name)) nbecker> byte-code("..." [kill-buffer buf signal data] 3) nbecker> find-file-noselect("/home/nbecker/balmail.tar.gz") nbecker> find-file("/home/nbecker/balmail.tar.gz") nbecker> #<compiled-function nil "...(8)" [t find-file-run-dired find-file dired-get-filename] 2 ("/usr/local/lib/xemacs/xemacs-packages/lisp/dired/dired.elc" . 61862) nil>() nbecker> call-interactively(dired-advertised-find-file) APA> Hmmh, my best guess would be that some APA> (null buffer-file-name) APA> got accidentally changed into APA> (null-buffer-file-name) APA> somewhere in the code-base you built from. APA> I have searched APA> cd d:\tmp\21.1\xemacs\lisp\ APA> find . -name "*.el" -exec grep -n "null-buffer-file-name" {} ;[1] APA> and APA> cd c:\XEmacs\xemacs-packages\lisp\ APA> find . -name "*.el" -exec grep -n "null-buffer-file-name" {} ; APA> and found nothing. APA> I have almost all the latest packages installed too! APA> Try doing the same search. APA> Hope this helps, APA> Adrian APA> Footnotes: APA> [1] find . -name "*.el" -exec grep -n "null-buffer-file-name" {} \; APA> should work on UNIX. I use Cygwin on WindowsNT, where ... {} ; works. APA> -- APA> Adrian Aichner <adrian(a)xemacs.org> -- Adrian Aichner <adrian(a)xemacs.org>

1 participants
0 comments

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta September 2000