August 2000 - XEmacs-Beta - XEmacs Mailing List Archives

openmotif and libXp.a (xemacs-21.2) 24 years, 3 months

Yoshiaki Kasahara

Hello, I usually use Athena widgets to build XEmacs, but today I tried using openmotif to build XEmacs (CVS updated today). But the configure script failed to detect Motif environment. Previously I could compile some Motif-based applications on this host, so I believe my configuration is sane. I used the following options. ./configure --compiler=gcc295 --with-mule --without-xim --error-checking=all --debug --with-xfs --with-widgets=motif --without-canna Here is an excerpt from config.log: ----------------------------------- configure:8559: checking for XmStringFree in -lXm configure:8575: gcc295 -o conftest -g -O3 -Wall -Wno-switch -Wpointer-arith -Winline -Wmissing-prototypes -Wshadow -I/usr/X11R6/include -L/usr/X11R6/lib -Xlinker -R/usr/X11R6/lib:/usr/local/lib conftest.c -lXm -ltiff -lpng -ljpeg -lz -lcompface -lXpm -lXmu -lXt -lXext -lX11 -lSM -lICE -lm -lutil -lxpg4 -lgcc -lc -lgcc /usr/lib/crtend.o /usr/lib/crtn.o 1>&5 /usr/X11R6/lib/libXm.so: undefined reference to `XpGetDocumentData' /usr/X11R6/lib/libXm.so: undefined reference to `XpGetPageDimensions' /usr/X11R6/lib/libXm.so: undefined reference to `XpGetOneAttribute' /usr/X11R6/lib/libXm.so: undefined reference to `XpStartPage' /usr/X11R6/lib/libXm.so: undefined reference to `XpGetScreenOfContext' /usr/X11R6/lib/libXm.so: undefined reference to `XpQueryExtension' /usr/X11R6/lib/libXm.so: undefined reference to `XpEndPage' /usr/X11R6/lib/libXm.so: undefined reference to `XpSetImageResolution' /usr/X11R6/lib/libXm.so: undefined reference to `XpEndJob' /usr/X11R6/lib/libXm.so: undefined reference to `XpSelectInput' /usr/X11R6/lib/libXm.so: undefined reference to `XpGetPdmStartParams' /usr/X11R6/lib/libXm.so: undefined reference to `XpGetContext' collect2: ld returned 1 exit status ----------------------------------- I tried to add -lXp and I could compile the test code. Actually I don't know what libXp.a is, but I guess configure should detect the existence of this library. I'm using FreeBSD-3.4R and XFree86-3.3.5. Regards, -- Yoshiaki Kasahara Computing and Communications Center, Kyushu University kasahara(a)nc.kyushu-u.ac.jp

6 participants
13 comments

toner cartridges 24 years, 3 months

bench1＠lakmail.com

BENCHMARK SUPPLY 5334 LAKE VIEW CLUB ATLANTA GA 30338 ***LASER PRINTER TONER CARTRIDGES*** ***FAX AND COPIER TONER*** WE ACCEPT GOVERNMENT, SCHOOL & UNIVERSITY PURCHASE ORDERS JUST LEAVE YOUR PO # WITH CORRECT BILLING & SHIPPING ADDRESS CHECK OUT OUR NEW CARTRIDGE PRICES FOR THE FOLLOWING PRINTERS: APPLE LASER WRITER PRO 600 OR 16/600 $69 LASER WRITER SELECT 300,310.360 $69 LASER WRITER 300, 320 $54 LASER WRITER LS,NT,2NTX,2F,2G & 2SC $54 LASER WRITER 12/640 $79 HEWLETT PACKARD LASERJET SERIES 2,3 & 3D (95A) $49 LASERJET SERIES 2P AND 3P (75A) $54 LASERJET SERIES 3SI AND 4SI (91A) $75 LASERJET SERIES 4L AND 4P $49 LASERJET SERIES 4, 4M, 5, 5M, 4+ (98A) $59 LASERJET SERIES 4000 HIGH YIELD (27X) $89 LASERJET SERIES 4V $95 LASERJET SERIES 5SI , 8000 $95 LASERJET SERIES 5L AND 6L $49 LASERJET SERIES 5P, 5MP, 6P, 6MP $59 LASERJET SERIES 5000 (29A) $135 LASERJET SERIES 1100 (92A) $49 LASERJET SERIES 2100 (96A) $79 LASERJET SERIES 8100 (82X) $145 HP LASERFAX LASERFAX 500, 700, FX1, $59 LASERFAX 5000, 7000, FX2, $59 LASERFAX FX3 $69 LASERFAX FX4 $79 LEXMARK OPTRA 4019, 4029 HIGH YIELD $135 OPTRA R, 4039, 4049 HIGH YIELD $135 OPTRA S 4059 HIGH YIELD $135 OPTRA E $59 OPTRA N $115 EPSON EPL-7000, 8000 $105 EPL-1000, 1500 $105 CANON LBP-430 $49 LBP-460, 465 $59 LBP-8 II $54 LBP-LX $54 LBP-MX $95 LBP-AX $49 LBP-EX $59 LBP-SX $49 LBP-BX $95 LBP-PX $49 LBP-WX $95 LBP-VX $59 CANON FAX L700 THRU L790 FX1 $59 CANONFAX L5000 L70000 FX2 $59 CANON COPIERS PC 20, 25 ETC.... $89 PC 3, 6RE, 7, 11 (A30) $69 PC 320 THRU 780 (E40) $89 NEC SERIES 2 LASER MODEL 90,95 $105 PLEASE NOTE: 1) ALL OUR CARTRIDGES ARE OEM COMPATABILE. 2) WE DO NOT SEND OUT CATALOGS OR PRICE LISTS 3) WE DO NOT FAX QUOTES OR PRICE LISTS. 4) WE DO NOT SELL TO RESELLERS OR BUY FROM DISTRIBUTERS 5) WE DO NOT CARRY: BROTHER-MINOLTA-KYOSERA-PANASONIC PRODUCTS 6) WE DO NOT CARRY: XEROX-FUJITSU-OKIDATA OR SHARP PRODUCTS 7) WE DO NOT CARRY ANY COLOR PRINTER SUPPLIES 8) WE DO NOT CARRY DESKJET/INKJET OR BUBBLEJET SUPPLIES 9) WE DO NOT BUY FROM OR SELL TO RECYCLERS OR REMANUFACTURERS ****OUR ORDER LINE IS 770-399-0953 **** ****OUR CUSTOMER SERVICE LINE IS 770-512-7444*** ****OUR E-MAIL REMOVAL AND COMPLAINT LINE IS 888-494-8597**** ****PLACE YOUR ORDER AS FOLLOWS**** : BY PHONE 770-399-0953 BY FAX: 770-698-9700 BY MAIL: BENCHMARK .SUPPLY 5334 LAKE VIEW CLUB ATLANTA GA 30338 MAKE SURE YOU INCLUDE THE FOLLOWING INFORMATION IN YOUR ORDER: 1) YOUR PHONE NUMBER 2) COMPANY NAME 3) SHIPPING ADDRESS 4) YOUR NAME 5) ITEMS NEEDED WITH QUANTITIES 6) METHOD OF PAYMENT. (COD OR CREDIT CARD) 7) CREDIT CARD NUMBER WITH EXPIRATION DATE 1) WE SHIP UPS GROUND. ADD $4.5 FOR SHIPPING AND HANDLING. 2) COD CHECK ORDERS ADD $3.5 TO YOUR SHIPPING COST. 2) WE ACCEPT ALL MAJOR CREDIT CARD OR "COD" ORDERS. 3) OUR STANDARD MERCHANDISE REPLCAMENT POLICY IS NET 90 DAYS.

1 participants
0 comments

help install xemacs-packages from cvs 24 years, 3 months

zw＠zhaoway.com

when i do $ make bindist in cvs co'd xemacs-packages top directory, i got alot of ... xemacs exiting.Cannot open load file: package-info.el ... please someone can enlighten me, :) thanks,

1 participants
0 comments

build problem with etc/emacs.po 24 years, 3 months

zw＠zhaoway.com

i build under LANG=zh_CN.GB2312 while making emacs.mo, it errors to stop, then i have to do: $ perl -pi -e 's|_X\"|\"|' etc/emacs.po then re-make, ... please enlighten me, ;) that is xemacs-21.2 cvs newest version (not more than two days older) thanks,

1 participants
0 comments

[ 104816 ] Please remove xemacs .ssh CVS module 24 years, 3 months

SourceForge.net

Support Request #104816, was updated on 2000-Aug-19 22:43 You can respond by visiting: http://sourceforge.net/support/?func=detailsupport&support_id=104816&grou... Category: None Status: Open Priority: 5 Summary: Please remove xemacs .ssh CVS module By: adriana Date: 2000-Aug-19 22:43 Message: Logged In: YES user_id=43883 Browser: Mozilla/4.72 [en] (WinNT; I) specifically, http://cvs.sourceforge.net/cgi-bin/cvsweb.cgi/.ssh/?cvsroot=xemacs is no longer needed. Thanks in advance! Adrian ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/support/?func=detailsupport&support_id=104816&grou...

1 participants
0 comments

Re: crash in gnus 24 years, 3 months

Michael Harnois

Hey, this seems to be fixed, saints be praised. -- Michael D. Harnois, Redeemer Lutheran Church, Washburn, IA mdharnois(a)home.com aa0bt(a)aa0bt.ampr.org "Times are bad. Children no longer obey their parents, and everyone is writing a book." -- Marcus Tullius Cicero

1 participants
0 comments

Re: Test release of new packages 24 years, 3 months

Michael Sperber

>>>>> "Dan" == Dan Holmsand <dan(a)innehallsbolaget.com> writes: Dan> Andreas Jaeger <aj(a)suse.de> writes: >> >>>>> Dan Holmsand writes: >> >> > Andreas Jaeger <aj(a)xemacs.org> writes: >> >> I've uploaded to ftp.xemacs.org/pub/xemacs/beta/experimental a number >> >> of new packages for testing. Please test them and send your feedback. >> >> > Great! Unfortunately, jde doesn't work very well. In my experience >> Did you try it? Dan> Yes - and I get lots of "Invalid function." errors. You need to be a little bit more precise as to what exactly your problem is. The JDE byte-compiles and runs just fine out here. The dependencies were difficult to get right, as Andy pointed out, and eieio.el can't be byte-compiled, but that was about the only problem I encountered. -- Cheers =8-} Mike Friede, Völkerverständigung und überhaupt blabla

1 participants
0 comments

Re: Two questions re. PSGML validation issues 24 years, 3 months

Adrian Aichner

>>>>> "Jerry" == Jerry James <james(a)eecs.ukans.edu> writes: Jerry> Adrian Aichner <aichner(a)ecf.teradyne.com> wrote: Jerry> [speaking of retrieving the DTD declaration from a document:] >> Here's what I came up with[1]: >> >> (format >> "<!DOCTYPE HTML PUBLIC \"%s\">\n" >> (sgml-entity-text >> (sgml-lookup-entity >> "HTML.Version" >> (sgml-dtd-parameters sgml-dtd-info)))) >> >> I'm afraid this would not work from XML DTDs. Given the above, do you >> have a suggestion to make this work both for HTML and XML? Jerry> Oh, now I see what you are trying to do. Well, since the Jerry> information you want doesn't appear to be stored anywhere, Jerry> how about parsing it out of the buffer again? Something Jerry> like this should do the trick: Jerry> (save-excursion Jerry> (goto-char (point-min)) Jerry> (sgml-with-parser-syntax Jerry> (let (start) Jerry> (sgml-skip-upto "MDO") Jerry> (setq start (point)) Jerry> (sgml-skip-upto-mdc) Jerry> (forward-char 1) Jerry> (buffer-substring start (point))))) Thanks Jerry. batch-psgml-validate.el uses the above now. >> Does XEmacs PSGML package 1.18 come with full XML support? I can't >> seem to find a full XML DTD in it? How would one use it to create XML >> documents? Jerry> It has some XML support. The XHTML 1.0 DTD is included in Jerry> the package. You could try using that to get a feel for Jerry> it. Look good. I have to manually switch to xml-mode though, to get the DTD parsed. Is this right? Will XML documents eventually use a .xml extension? Jerry> [The next part deals with using (sgml-next-trouble-spot) to Jerry> get a list of problems in a document.] >> I would like to generate an error message parsable by >> compilation-mode to jump to those errors via next-error. Jerry> Have you considered using (sgml-validate Jerry> (sgml-default-validate-command)) to invoke a real SGML Jerry> validator (say nsgmls)? That would put all the error I stopped using external validation programs ever since I found PSGML. Jerry> messages in a buffer, ready for parsing by Jerry> compilation-mode. It also would eliminate the false Jerry> positives that sgml-next-trouble-spot tends to generate in Jerry> some situations. (PSGML isn't a full SGML parser, although Jerry> it does a pretty good job.) I think that would be a lot I have yet to find an instance where PSGML screws up. Jerry> easier. Jerry> On the other hand, nsgmls doesn't have DTDDECL support, so Jerry> it generates lots of bogus messages, too. You'd have to I won't use it then. Jerry> throw away or ignore every message containing the string Jerry> DTDDECL. Or fix nsgmls. :-) -- Jerry James Email: Got enough on my hands already :-) Jerry> james(a)eecs.ukans.edu WWW: http://www.eecs.ukans.edu/~james/ Thanks for your help! Best regards, Adrian -- Adrian Aichner <adrian(a)xemacs.org>

1 participants
0 comments

Re: Test release of new packages 24 years, 3 months

Andreas Jaeger

Hi Adrian, thanks for your testing! >>>>> Adrian Aichner writes: >>>>> "AJ" == Andreas Jaeger <aj(a)xemacs.org> writes: AJ> I've uploaded to ftp.xemacs.org/pub/xemacs/beta/experimental a number AJ> of new packages for testing. Please test them and send your feedback. APA> Hello Andreas, APA> here's the results of my testing: [...] AJ> - semantic: New package, needed by JDE. APA> PROBLEM: cannot be downloaded because of corrupted entry in APA> package-index.LATEST.pgp: APA> ;;;＠＠＠ APA> (package-get-update-base-entry (quote APA> (pcl-cvs ^^^^^^^ Thanks - I've fixed this and uploaded new package-index and semantic versions. 2000-08-19 Andreas Jaeger <aj(a)suse.de> * package-info.in: Fixed copy & paste error - the package name is semantic. AJ> - eicj: New package: ICQ for XEmacs on Linux APA> PROBLEM: This should be eicq instead, right? Yes. AJ> - pcl-cvs: Should work now with XEmacsen without Mule. APA> Downloaded and used. APA> PROBLEM: While cvs-status works fine, cvs-mode-status still APA> requires mule! :-( Any volunteers to fix this? AJ> *WARNING*: I haven't tested the packages on my own system at all but AJ> will do so after uploading the packages (but only those that I use). AJ> Use them at your own risk! APA> That's what people do with MS products too. Ever had a corrupted APA> registry before? Problem resolution under MS is easier though: You No, I'm not using MS products. APA> just have to re-install EVERYTHING, including the OS. No, this is not You should switch to Linux ;-). APA> a joke. Andreas -- Andreas Jaeger SuSE Labs aj(a)suse.de private aj(a)arthur.inka.de http://www.suse.de/~aj

1 participants
0 comments

Re: New psgml test version uploaded 24 years, 3 months

Adrian Aichner

>>>>> "AJ" == Andreas Jaeger <aj(a)suse.de> writes: AJ> I've uploaded psgml-1.19 to: AJ> ftp.xemacs.org/pub/xemacs/beta/experimental/ Downloaded and used without problems so far. Thanks Andreas! Best regards, Adrian AJ> It contains the following bug fixes: AJ> 2000-08-15 Adrian Aichner <aichner(a)ecf.teradyne.com> AJ> * psgml-html.el(html-quote-region): Add autoload cookie. AJ> * psgml-fs.el (psgml-fs): Provide yourself. AJ> * psgml-html.el (psgml-html): Ditto. AJ> * psgml-info.el (psgml-info): Ditto. AJ> Have fun, AJ> Andreas AJ> -- AJ> Andreas Jaeger AJ> SuSE Labs aj(a)suse.de AJ> private aj(a)arthur.inka.de AJ> http://www.suse.de/~aj -- Adrian Aichner <adrian(a)xemacs.org>

1 participants
0 comments

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta August 2000