8:59 a.m.
I'm committing this in a day or so. I've already tested it. The purpose,
as described in a previous message, is to rationalize the names used for
various integral types, so that they match their intended uses, and
eliminate types that were not semantically different from each other.
--------------------------------------------------------------------------
The great integral types renaming.
I ran the following script to do the conversion. (NOTE: This script
is idempotent. You can safely run it multiple times and it will
not screw up previous results -- in fact, it will do nothing if
nothing has changed. Thus, it can be run repeatedly as necessary
to handle patches coming in from old workspaces, or old branches.)
There are two tags, just before and just after the change:
`pre-integral-type-rename' and `post-integral-type-rename'. When
merging code from the main trunk into a branch, the best thing to
do is first merge up to `pre-integral-type-rename', then apply the
script and associated changes, then merge from
`post-integral-type-change' to the present. (Alternatively, just do
the merging in one operation; but you may then have a lot of
conflicts needing to be resolved by hand.)
Script `fixtypes.sh' follows:
----------------------------------- cut ------------------------------------
files="*.[ch] s/*.h m/*.h config.h.in ../configure.in Makefile.in.in
../lib-src/*.[ch] ../lwlib/*.[ch]"
gr Memory_Count Bytecount $files
gr Lstream_Data_Count Bytecount $files
gr Element_Count Elemcount $files
gr Hash_Code Hashcode $files
gr extcount bytecount $files
gr bufpos charbpos $files
gr bytind bytebpos $files
gr memind membpos $files
gr bufbyte intbyte $files
gr Extcount Bytecount $files
gr Bufpos Charbpos $files
gr Bytind Bytebpos $files
gr Memind Membpos $files
gr Bufbyte Intbyte $files
gr EXTCOUNT BYTECOUNT $files
gr BUFPOS CHARBPOS $files
gr BYTIND BYTEBPOS $files
gr MEMIND MEMBPOS $files
gr BUFBYTE INTBYTE $files
gr MEMORY_COUNT BYTECOUNT $files
gr LSTREAM_DATA_COUNT BYTECOUNT $files
gr ELEMENT_COUNT ELEMCOUNT $files
gr HASH_CODE HASHCODE $files
----------------------------------- cut ------------------------------------
`fixtypes.sh' is a Bourne-shell script; it uses 'gr':
----------------------------------- cut ------------------------------------
#!/bin/sh
# Usage is like this:
# gr FROM TO FILES ...
# globally replace FROM with TO in FILES. FROM and TO are regular expressions.
# backup files are stored in the `backup' directory.
from="$1"
to="$2"
shift 2
echo ${1+"$＠"} | xargs global-replace "s/$from/$to/g"
----------------------------------- cut ------------------------------------
`gr' in turn uses a Perl script to do its real work,
`global-replace', which follows:
----------------------------------- cut ------------------------------------
: #-*- Perl -*-
### global-modify --- modify the contents of a file by a Perl expression
## Copyright (C) 1999 Martin Buchholz.
## Copyright (C) 2001 Ben Wing.
## Authors: Martin Buchholz <martin(a)xemacs.org>, Ben Wing <ben(a)xemacs.org>
## Maintainer: Ben Wing <ben(a)xemacs.org>
## Current Version: 1.0, May 5, 2001
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with XEmacs; see the file COPYING. If not, write to the Free
# Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
eval 'exec perl -w -S $0 ${1+"$＠"}'
if 0;
use strict;
use FileHandle;
use Carp;
use Getopt::Long;
use File::Basename;
(my $myName = $0) =~ s＠.*/＠＠; my $usage="
Usage: $myName [--help] [--backup-dir=DIR] [--line-mode] [--hunk-mode]
PERLEXPR FILE ...
Globally modify a file, either line by line or in one big hunk.
Typical usage is like this:
[with GNU print, GNU xargs: guaranteed to handle spaces, quotes, etc.
in file names]
find . -name '*.[ch]' -print0 | xargs -0 $0 's/\bCONST\b/const/g'\n
[with non-GNU print, xargs]
find . -name '*.[ch]' -print | xargs $0 's/\bCONST\b/const/g'\n
The file is read in, either line by line (with --line-mode specified)
or in one big hunk (with --hunk-mode specified; it's the default), and
the Perl expression is then evalled with \$_ set to the line or hunk of
text, including the terminating newline if there is one. It should
destructively modify the value there, storing the changed result in \$_.
Files in which any modifications are made are backed up to the directory
specified using --backup-dir, or to `backup' by default. To disable this,
use --backup-dir= with no argument.
Hunk mode is the default because it is MUCH MUCH faster than line-by-line.
Use line-by-line only when it matters, e.g. you want to do a replacement
only once per line (the default without the `g' argument). Conversely,
when using hunk mode, *ALWAYS* use `g'; otherwise, you will only make one
replacement in the entire file!
";
my %options = ();
$Getopt::Long::ignorecase = 0;
&GetOptions (
\%options,
'help', 'backup-dir=s', 'line-mode', 'hunk-mode',
);
die $usage if $options{"help"} or ＠ARGV <= 1;
my $code = shift;
die $usage if grep (-d || ! -w, ＠ARGV);
sub SafeOpen {
open ((my $fh = new FileHandle), $_[0]);
confess "Can't open $_[0]: $!" if ! defined $fh;
return $fh;
}
sub SafeClose {
close $_[0] or confess "Can't close $_[0]: $!";
}
sub FileContents {
my $fh = SafeOpen ("< $_[0]");
my $olddollarslash = $/;
local $/ = undef;
my $contents = <$fh>;
$/ = $olddollarslash;
return $contents;
}
sub WriteStringToFile {
my $fh = SafeOpen ("> $_[0]");
binmode $fh;
print $fh $_[1] or confess "$_[0]: $!\n";
SafeClose $fh;
}
foreach my $file (＠ARGV) {
my $changed_p = 0;
my $new_contents = "";
if ($options{"line-mode"}) {
my $fh = SafeOpen $file;
while (<$fh>) {
my $save_line = $_;
eval $code;
$changed_p = 1 if $save_line ne $_;
$new_contents .= $_;
}
} else {
my $orig_contents = $_ = FileContents $file;
eval $code;
if ($_ ne $orig_contents) {
$changed_p = 1;
$new_contents = $_;
}
}
if ($changed_p) {
my $backdir = $options{"backup-dir"};
$backdir = "backup" if !defined ($backdir);
if ($backdir) {
my ($name, $path, $suffix) = fileparse ($file, "");
my $backfulldir = $path . $backdir;
my $backfile = "$backfulldir/$name";
mkdir $backfulldir, 0755 unless -d $backfulldir;
print "modifying $file (original saved in $backfile)\n";
rename $file, $backfile;
}
WriteStringToFile ($file, $new_contents);
}
}
----------------------------------- cut ------------------------------------
In addition to those programs, I needed to fix up a few other
things, particularly relating to the duplicate definitions of
types, now that some types merged with others. Specifically:
1. in lisp.h, removed duplicate declarations of Bytecount. The
changed code should now look like this: (In each code snippet
below, the first and last lines are the same as the original, as
are all lines outside of those lines. That allows you to locate
the section to be replaced, and replace the stuff in that
section, verifying that there isn't anything new added that
would need to be kept.)
--------------------------------- snip -------------------------------------
/* Counts of bytes or chars */
typedef EMACS_INT Bytecount;
typedef EMACS_INT Charcount;
/* Counts of elements */
typedef EMACS_INT Elemcount;
/* Hash codes */
typedef unsigned long Hashcode;
/* ------------------------ dynamic arrays ------------------- */
--------------------------------- snip -------------------------------------
2. in lstream.h, removed duplicate declaration of Bytecount.
Rewrote the comment about this type. The changed code should
now look like this:
--------------------------------- snip -------------------------------------
#endif
/* The have been some arguments over the what the type should be that
specifies a count of bytes in a data block to be written out or read in,
using Lstream_read(), Lstream_write(), and related functions.
Originally it was long, which worked fine; Martin "corrected" these to
size_t and ssize_t on the grounds that this is theoretically cleaner and
is in keeping with the C standards. Unfortunately, this practice is
horribly error-prone due to design flaws in the way that mixed
signed/unsigned arithmetic happens. In fact, by doing this change,
Martin introduced a subtle but fatal error that caused the operation of
sending large mail messages to the SMTP server under Windows to fail.
By putting all values back to be signed, avoiding any signed/unsigned
mixing, the bug immediately went away. The type then in use was
Lstream_Data_Count, so that it be reverted cleanly if a vote came to
that. Now it is Bytecount.
Some earlier comments about why the type must be signed: This MUST BE
SIGNED, since it also is used in functions that return the number of
bytes actually read to or written from in an operation, and these
functions can return -1 to signal error.
Note that the standard Unix read() and write() functions define the
count going in as a size_t, which is UNSIGNED, and the count going
out as an ssize_t, which is SIGNED. This is a horrible design
flaw. Not only is it highly likely to lead to logic errors when a
-1 gets interpreted as a large positive number, but operations are
bound to fail in all sorts of horrible ways when a number in the
upper-half of the size_t range is passed in -- this number is
unrepresentable as an ssize_t, so code that checks to see how many
bytes are actually written (which is mandatory if you are dealing
with certain types of devices) will get completely screwed up.
--ben
*/
typedef enum lstream_buffering
--------------------------------- snip -------------------------------------
3. in dumper.c, there are four places, all inside of switch()
statements, where XD_BYTECOUNT appears twice as a case tag. In
each case, the two case blocks contain identical code, and you
should *REMOVE THE SECOND* and leave the first.
ben