October 2000 - XEmacs-Beta - XEmacs Mailing List Archives

Steve Youngs

I've just released updated versions of: mailcrypt-2.06-pkg.tar.gz - fix problem with mailcrypt not finding macros. ps-print-nomule-1.04-pkg.tar.gz - Update to ps-print.el -- |---<Regards, Steve Youngs>-----------[GnuPG KeyID: 59E4C4B2]---| | XEmacs - It's not just an editor... | | It's a way of life. | |----------------------------------<mailto:youngs＠xemacs.org>---|

1 participants
0 comments

Re: Where is the canonical XEmacs CVS repository now? 23 years, 5 months

Adrian Aichner

>>>>> "Karl" == Karl M Hegbloom <karlheg(a)bittersweet.inetarena.com> writes: Karl> I'm still updating from cvs.xemacs.org. Is that correct? Karl> Or should I be using one on sourceforge now? What if I Karl> want to commit a change to one of the lisp packages I Karl> maintain? Where should I commit it? Hi Karl, only the content of www.xemacs.org has been taken to SF (module xemacsweb) and is currently automatically updated at http://xemacs.sourceforge.net/ via commits to the SF repository. www.xemacs.org might get updated automatically from the SF repository as well, in case I regain cvs and ssh access again, which I lost yesterday; or somebody else jumps in. All other XEmacs development (modules xemacs and xemacs-packages) is still happening at cvs.xemacs.org with no short-term plans for a change. Best regards, Adrian Karl> -- Karl> We should not penalize the conscientious to coddle those who run brain-dead software. Karl> I am karlheg, of deB.ORG. You will be freed. Resistance is useful. Karl> mailto:karlheg＠debian.org (Karl M. Hegbloom) Karl> http://www.debian.org/~karlheg -- Adrian Aichner <adrian(a)xemacs.org>, http://www.xemacs.org

1 participants
0 comments

Where is the canonical XEmacs CVS repository now? 23 years, 5 months

Karl M. Hegbloom

I'm still updating from cvs.xemacs.org. Is that correct? Or should I be using one on sourceforge now? What if I want to commit a change to one of the lisp packages I maintain? Where should I commit it? -- We should not penalize the conscientious to coddle those who run brain-dead software. I am karlheg, of deB.ORG. You will be freed. Resistance is useful. mailto:karlheg＠debian.org (Karl M. Hegbloom) http://www.debian.org/~karlheg

1 participants
0 comments

Mailcrypt problems 23 years, 5 months

Steve Youngs

I just received a report of a problem with the mailcrypt package I recently released. Apparently it's not finding macros (using VM). If you're using Gnus, MH-E, RMail, or VM together with MailCrypt (the latest package versions) I want to hear from you. Are you having problems? I am using the latest XEmacs package mailcrypt together with Gnus 5.8.8 (not the XEmacs package version) with no problems. Of course it could very well be something I messed up. I made a change to the mailcrypt Makefile to push things into the load-path. [1] ,----[ Is this right? ] | PRELOADS = -eval "(setq load-path \ | (nconc load-path \ | '((expand-file-name \"../gnus/gnus/lisp/\") \ | (expand-file-name \"../mh-e/\") \ | (expand-file-name \"../rmail/\") \ | (expand-file-name \"../vm/\"))))" `---- Footnotes: [1] The upstream mailcrypt docs say gnus, mh-e, rmail vm need to be in load-path for mailcrypt to bytecompile properly. -- |---<Regards, Steve Youngs>-----------[GnuPG KeyID: 59E4C4B2]---| | XEmacs - It's not just an editor... | | It's a way of life. | |----------------------------------<mailto:youngs＠xemacs.org>---|

2 participants
2 comments

RE: [Bug #117375] Long standing bug in XEmacs' dired 23 years, 5 months

Jerker Haglund

> solution. I looked like this: > > (defvar dired-re-month-and-time > (concat > (let ((language (getenv "LANG"))) > (cond > ((equal language "es_ES") > " \$ene\\|feb\\|mar\\|abr\\|may\\|jun\\|jul\\|ago\\|sep\\|oct\\|nov\\|dic\$") > (t " \$Jan\\|Feb\\|Mar\\|Apr\\|May\\|June?\\|July?\\|Aug\\|Sep\\|Oct\\|Nov\\|Dec\$"))) > ; June and July are for HP-UX 9.0 Env vars are global, and defvar is evaluated once. I had a mixture of machines with different languages that I accessed through efs, so I had to create a superset. /J. Haglund

1 participants
0 comments

Package Release 23 years, 5 months

Steve Youngs

I've just released the following packages. mail-lib-1.32-pkg.tar.gz - smtpmail.el synced with FSF version. xemacs-base-1.46-pkg.tar.gz - Updates to debug.el. xemacs-devel-1.30-pkg.tar.gz - New file checkdoc.el (check lisp code for doc string errors) ispell-1.21-pkg.tar.gz - Update to ispell.el (suppress horizontal scrollbar). -- |---<Regards, Steve Youngs>-----------[GnuPG KeyID: 59E4C4B2]---| | XEmacs - It's not just an editor... | | It's a way of life. | |----------------------------------<mailto:youngs＠xemacs.org>---|

1 participants
0 comments

Re: [Failure] 21.2.36 on Solaris 2.6 23 years, 5 months

Raymond Toy

>>>>> "Holger" == Holger Schauer <schauer(a)coling.uni-freiburg.de> writes: Holger> I get a failure on dumping the XEmacs executable: Holger> Loading site-load... Holger> Finding pointers to doc strings... Holger> Finding pointers to doc strings...done Holger> Dumping under the name xemacs Holger> unexec(): dldump(/home/schauer/misc/src/packages/xemacs/xemacs-21.2.36/src/xemacs): ld.so.1: ./temacs: fatal: /home/schauer/misc/src/packages/xemacs/xemacs-21.2.36/src/xemacs: unknown dynamic entry: 1879048176 [snip] Holger> ./configure 'sparc-sun-solaris2.6' '--cflags=' '--prefix=/home/schauer/misc' '--with-dialogs=lucid' '--with-pop' '--with-site-lisp' '--with-xpm=yes' '--site-libraries=/home/schauer/misc/lib' '--site-includes=/home/schauer/misc/include' [snip] Holger> Compiler: gcc Which version of gcc? No optimization at all? I just reported the same problem with gcc 2.95.2 without optimization (or was that -O1)? gcc 2.95.2 with -O3 optimization gets past this but I've been getting crashes while running xemacs (quite frequently at times). I "solved" this by using Sun CC. I should try this with gcc 2.7.2.x.... Ray

1 participants
0 comments

Re: Suggestion for futher releases 23 years, 5 months

Alexander G. Burchell

>>>>> "Michael" == Michael Werliin, PDI <mwe(a)post.dk> writes: Michael> Take popup-dialog-box for example. If there was a good Michael> example of how to use it, it would be simple to use, but Michael> right now it you must have knowledge of the way many Michael> other aspects of XEmacs LISP works to use the help. Trivial example: ;; Bo Derek ruined my life! (defvar yow-is-up nil "Is the yow popup showing?") (defun yow-popdown () (interactive) (setq yow-is-up nil) nil) (defun yow-popup () (interactive) (if (not yow-is-up) (progn (popup-dialog-box `(,(yow) [ "Ok" yow-popdown t ])) (setq yow-is-up t)))) -- Alexander Burchell Wilshire Associates aburchel(a)wilshire.com (310) 899-2303

1 participants
0 comments

Re: where do I ask quesions 23 years, 5 months

Adrian Aichner

>>>>> "Charles" == Charles G Waldman <cgw(a)fnal.gov> writes: Charles> Adrian Aichner writes: >> The comp.emacs.xemacs newsgroup is the place to go. >> >> On xemacs-beta you should ask question, report success or failure, >> which relate to beta testing of XEmacs, currently XEmacs 21.2-bXX. Charles> Is it also fair to add to this, (since 21.1 and 21.2 Charles> share the same packages), that xemacs-beta is also OK for Charles> discussion of bugs, modifications, etc, to the packages Charles> (esp. versions of packages in CVS which have not been Of course! I forgot to mention that. What would XEmacs be without well-maintained (and tested) packages these day? Charles> officially released?). Or should this discussion also go Charles> to c.e.x ? -- Adrian Aichner <adrian(a)xemacs.org>, http://www.xemacs.org

1 participants
0 comments

hyperlinks in hyperhelp 23 years, 5 months

Volker Franz

This bug report will be sent to the XEmacs Development Team, not to your local site managers!! Please write in English, because the XEmacs maintainers do not have translators to read other languages for them. In XEmacs 21.2 (beta35) "Nike" [Lucid] (i586-pc-linux) of Tue Sep 5 2000 on kesch Please describe exactly what actions triggered the bug and the precise symptoms of the bug: Hi, the cool hyper-links in hyperhelp do not work. For example, after startup ($xemacs-21.2-b35 -q) I called M-x hyper-describe-function RET on the function "version". In the description of this function is a hyper-link to the variable: system-configuration. Clicking on this link (or moving the cursor to it and pressing RETURN) simply closes the help-window, but does not follow the link. Cheers Volker Recent keystrokes: M-x h y p e r - d e s c TAB b u BS BS f u n TAB RET v e r s i o n RET C-TAB button2 button2up misc-use r Recent messages (most recent first): Parsing /home/vf/.mailrc... Loading mail-abbrevs...done Loading mail-abbrevs... Loading emacsbug...done Loading emacsbug... Loading hyper-apropos...done Loading cus-face...done Loading cus-face... Loading hyper-apropos...

1 participants
0 comments

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta October 2000