Need help in debugging GNU-sync-vc crash with 21.4.19
18 years, 7 months
Ville Skyttä
Ville Skyttä
Like I've muttered a few times already, one of the remaining blockers
for starting to consider pushing the GNU-synced vc package from
unsupported/scop/vc to the packages tree is that it causes lots of
crashing when opening vc-controlled files.
Debugging that is unfortunately beyond me, so help is needed. Here's
the setup for the reproducer:
The binary package built with XEmacs 21.4.19 from what's currently in
unsupported/scop/vc in CVS is available at
http://koti.welho.com/vskytta/xemacs/new-vc/vc-0.01-pkg.tar.gz
Minimal tarball containing one Subversion controlled file:
http://koti.welho.com/vskytta/xemacs/new-vc/svndir.tar.gz
Install the above vc package, modify ~/.xemacs/init.el and add "(require
'vc-hooks)" there, unpack the svndir tarball somewhere.
Now, try to open the SVN controlled file from inside the tarball -> for
me, XEmacs crashes _almost_ always. When it doesn't, it displays a
random error message. Sometimes (*very* rare), it opens the file
successfully. This happens with other vc backends besides svn too,
although the success rate might be a bit higher with eg. cvs. I won't
bother including backtraces or error messages because they seem to be
different on every run.
I have discovered that if I remove auto-autoloads.elc from the above
installed vc package (but leave auto-autoloads.el in), XEmacs never
crashes. No other ideas :(
My Installation file:
http://koti.welho.com/vskytta/xemacs/new-vc/Installation.txt
(Currently running FC5test[23] on x86_64 and XEmacs 21.4.19 built with
gcc 4.1.0 and using neXtaw, but I've reproduced with a variety of XEmacs
21.4.x versions, some using Xaw3d, i386 and x86_64, built with gcc's
3.4.x and 4.0 too.)
- 3 participants
- 7 comments
[Fwd: [Success with a little effort] XEmacs 21.4.19 "Constant Variable" sparc-sun-solaris2.9]
18 years, 8 months
Rodney Sparapani
Rodney Sparapani
Never arrived on buildreports; resending.
-------- Original Message --------
Subject: [Success with a little effort] XEmacs 21.4.19 "Constant
Variable" sparc-sun-solaris2.9
Date: Tue, 31 Jan 2006 14:46:08 -0600
From: Rodney Sparapani <rsparapa(a)mcw.edu>
Organization: Medical College of Wisconsin, Milwaukee, WI
To: XEmacs Build Reports List <xemacs-buildreports(a)xemacs.org>
Whenever I tried to compile with sound support I would get errors
like:
Undefined first referenced
symbol in file
play_sound_file sound.o
play_sound_data sound.o
I was able to get it all to work by adding the following two lines
to src/config.h:
#define play_sound_file esd_play_file
#define play_sound_data esd_play_stream
I've tested (play-sound-file ...) and it does work. I guess it
is just a matter of getting autoconf to do this automatically.
> XEmacs Build Report generated by emacs-version
> 21.4 (patch 19) "Constant Variable" XEmacs Lucid
> with system-configuration
> sparc-sun-solaris2.9
> follows:
> Contents of /usr/local/apps/xemacs/xemacs-21.4.19/Installation:
> (Output from most recent run of ./configure)
uname -a: SunOS buz.biostat.mcw.edu 5.9 Generic_118558-10 sun4u sparc
SUNW,Ultra-4
configure '--with-mule' '--with-scrollbars=motif'
'--with-dialogs=motif' '--with-widgets=motif'
'--with-clash-detection=yes' '--cflags=-Os' '--with-sound=esd'
'--native-sound-lib=/usr/local/lib/libao.so'
XEmacs 21.4.19 "Constant Variable" configured for `sparc-sun-solaris2.9'.
Compilation / Installation:
Source code location: /usr/local/apps/xemacs/xemacs-21.4.19
Installation prefix: /usr/local
Runtime library search path:
/usr/ccs/lib:/opt/sfw/lib:/usr/openwin/lib:/usr/local/lib/gcc-lib/sparc-sun-solaris2.9/3.3.4/../../..
Operating system description file: `s/sol2.h'
Machine description file: `m/sparc.h'
Compiler: gcc-3.3.4 -Os
Compiler version: gcc-3.3.4 (GCC) 3.3.4
Compiler specs file:
/usr/local/lib/gcc-lib/sparc-sun-solaris2.9/3.3.4/specs
Relocating allocator for buffers: yes
GNU version of malloc: yes
libc: SUNWcsl 11.9.0,REV=2002.04.06.15.27
Window System:
Compiling in support for the X window system:
- X Windows headers location: /usr/openwin/include
- X Windows libraries location: /usr/openwin/lib
- Handling WM_COMMAND properly.
Compiling in support for Motif.
*WARNING* Many versions of Motif are buggy, requiring workarounds.
You are likely to experience slow redisplay.
You may need to install vendor patches to Motif.
See PROBLEMS for more information.
Using Lucid menubars.
Using Motif scrollbars.
Using Motif dialog boxes.
Using Motif native widgets.
TTY:
Compiling in support for ncurses.
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Sound:
Compiling in support for sound (native).
Compiling in support for ESD (Enlightened Sound Daemon).
Databases:
Compiling in support for Berkeley database.
Compiling in support for GNU DBM.
Compiling in support for LDAP.
Internationalization:
Compiling in support for Mule (multi-lingual Emacs).
Compiling in support for XIM (X11R5+ I18N input method).
- Using Motif to provide XIM support.
Mail:
Compiling in support for "dot-locking" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for ToolTalk.
Compiling in support for dynamic shared object modules.
/usr/local/apps/xemacs/xemacs-21.4.19/xemacs-make-install.err not found!
/usr/local/apps/xemacs/xemacs-21.4.19/xemacs-make-check.err not found!
/usr/local/apps/xemacs/xemacs-21.4.19/xemacs-make-check-temacs.err not
found!
/usr/local/apps/xemacs/xemacs-21.4.19/xemacs-make-all.err not found!
/usr/local/apps/xemacs/xemacs-21.4.19/beta.err not found!
- 3 participants
- 4 comments
Re: XEmacs 21.5.24 Cannot load project file to VS .NET
18 years, 8 months
Robinows＠aol.com
Robinows＠aol.com
In a message dated 1/30/2006 4:50:23 A.M. Eastern Standard Time,
rrankin1424-xemacs(a)yahoo.com writes:
> I tried to load the .dsp (VC6 project file) cannot be load onto my VS .NET
> Version 7.1.3088 with .NET Framework 1.1 Version 1.1.4322 SP1
>
> I was told that the .dsp was corrupted, but I look through it and find the
> text file seems to be alright
>
> Any suggestion for me to solve this?
I don't understand why you don't understand. There's a problem with a file
in the XEmacs distribution. Why would you ask on an MS list?
In any case, the answer to the original poster's question:
xemacs.dsp is missing the carriage returns required by Visual Studio.
VS can compile source files with Unix line endings but the project files
need to be DOSish.
Convert the line endings and things should work fine.
- 2 participants
- 1 comments
Re: 21.4.19 to be released soon
18 years, 8 months
Vin Shelton
Vin Shelton
On 12/30/05, glenn opdycke-hansen <glennoph(a)gmail.com> wrote:
> I downloaded and installed the following:
>
> On 12/28/05, Vin Shelton <acs(a)xemacs.org> wrote:
> > In anticipation of next week's 21.4.19 release, I have copied a native
> > Windows setup kit to
> >
> ftp://ftp.xemacs.org/pub/xemacs/windows/testing/XEmacs%20Setup%2021.4.19-...
> > Please download and install this kit if you are interested.
>
>
> I have the following questions:
>
> 1. Should the help|about report Version 21.4.18?
>
> 2. Is it missing ClearCase support or should that be added after the
> install?
>
> --glenn
>
>
Glenn,
Thanks for downloading and trying out the pre-release. In answer to
your questions, didn't the pre-announcement cover both those points?
1. Yes, due to arcanities of the release process, the version number
doesn't get incremented until the actual release.
2. You can download the vc-cc package to get ClearCase support.
HTH,
Vin
- 2 participants
- 1 comments
Re: [Bug: 21.4.18] gnus 5.10.7 not rendering Latin-1 headers
18 years, 8 months
Mike Kupfer
Mike Kupfer
>>>>> "Reiner" == Reiner Steib <reinersteib+gmane(a)imap.cc> writes:
Reiner> I don't see any reason not to improve compatibility in `mm*.el'
Reiner> for XEmacs (MULE or non-MULE). But since most of the currently
Reiner> active Gnus developers don't use XEmacs, I'm afraid this won't
Reiner> happen unless you (i.e. XEmacs developers and users) contribute
Reiner> patches or concrete proposals.
I'm willing to help as best I can, but I could use some clues, either
from the gnus or XEmacs folks.
mm-coding-system-p appears to be trying to figure out what coding system
interface to use, with the choices being find-coding-system,
coding-system-p, and mm-get-coding-system-list. Are any of these
standard Emacs or XEmacs interfaces?
The docstring for mm-coding-system-p says it returns "a coding system
object in XEmacs". The XEmacs Lisp reference talks about coding
systems, under MULE. Does that mean that coding system objects only
exist in MULE XEmacs? What should (mm-coding-system-p 'iso-8859-1)
return in non-MULE XEmacs?
mike
- 6 participants
- 10 comments
README.wav/README.au crash xemacs
18 years, 8 months
Rodney Sparapani
Rodney Sparapani
There are two files in xemacs-packages/etc/sounds that will crash xemacs.
They are really text files, but they are named like sound files which tempts
the user into playing them and crashing their xemacs. Maybe they should be
renamed to README.wav.txt and README.au.txt?
Lisp backtrace follows:
play-sound-file("/usr/local/lib/xemacs/xemacs-packages/etc/sounds/README.au")
eval((play-sound-file
"/usr/local/lib/xemacs/xemacs-packages/etc/sounds/README.au")) # bind (expr)
eval-interactive((play-sound-file
"/usr/local/lib/xemacs/xemacs-packages/etc/sounds/README.au"))
# bind (standard-output opoint ignore-quotes eval-last-sexp-arg-internal)
eval-last-sexp(t)
# bind (standard-output)
#<compiled-function nil "...(13)" [standard-output terpri eval-last-sexp t] 2
1019499 nil>()
call-interactively(eval-print-last-sexp)
# (condition-case ... . error)
# (catch top-level ...)
[2] + segmentation fault xemacs -geometry 100x40 -f viper-mode
- 2 participants
- 1 comments
another UTF8 Problem in 21.4.17
18 years, 8 months
Uwe Brauer
Uwe Brauer
Hello
the following symbol
✉
is correctly decoded in GNU emasc 21.4 (but not displayed!, it is a
mail envelope)
in Xemacs 21.4.17 it is decoded, incorrectly, as ?
is the situation better in 21.5
Uwe Brauer
- 6 participants
- 12 comments
XEmacs 21.5.25 "eggplant" is released.
18 years, 9 months
Stephen J. Turnbull
Stephen J. Turnbull
* XEmacs 21.5.25 "eggplant" is released.
"eggplant" is the twenty-sixth in the VEGETABLE series.
The successor to XEmacs 21.5.24 "dandelion", "eggplant" adds a clearer
and more convenient interface to configuring package locations, and the
usual assortment of fixes and improvements.
The main purpose of this release is as a "checkpoint" before a large and
possibly destabilizing patch to the garbage collector. At this point
policy is uncertain, but there is a proposal under discussion to make
Marcus Crestani's new incremental garbage collector the default after
it's checked in next week. Those who would like to maintain maximum
stability may configure with `--disable-newgc'. (`--enable-kkcc' will
remain the default, and `--enable-mc-alloc' will be *removed*, as most
of its function is included in `--enable-newgc'.)
The `--with-package-prefix' option introduced in 21.5.19 has been
removed, in favor of a more flexible scheme with either functional or
logical specifications:
Functional name | Logical name | Default
-----------------------+-----------------------+---------------------
--with-user-packages | --with-early-packages | "~/.xemacs"
--with-system-packages | --with-late-packages | "$prefix/lib/xemacs"
--with-legacy-packages | --with-last-packages | (nil)
Each option takes a colon-separated (for MS Windows, semicolon-separated)
list of directories as argument. Each directory is interpreted as a
"package directory" which may contain one or more of the subdirectories
"site-packages", "mule-packages", and "xemacs-packages". Under each of
the *-packages subdirectories, any Lisp packages found installed into the
lisp, lib-src, info, etc, man, and pkginfo directories in the usual way
will have their auto-autoloads and custom-load libraries loaded, and
their lisp directory added to LOAD-PATH in the normal startup process.
If you have been using `--with-package-prefix=PREFIX', you should get the
same effect with `--with-system-packages=PREFIX'.
Two crashes have been fixed, in Xft related to fonts with non-ASCII names
and in the syntax cache triggered by the combination of cperl-mode and
completion.el. Other minor fixes and improvements are listed below, with
detailed descriptions in the ChangeLogs.
This is the development line. The current series started with XEmacs 21.5.0
(an alias for XEmacs 21.4.0 "Solid Vapor", the first release in the current
stable line). 21.5 is the code base for introduction of major new subsystems
and fixes to design bugs that experience shows will introduce instability.
So far the main effort has been on improved support for Unicode, updates to
the build infrastructure, and development of new features in memory allocation.
For general information about XEmacs, the developers, and the user community,
see our home page,
http://www.xemacs.org/
* XEmacs 21.5.25 is "beta" software.
The usual "no warranty" disclaimer (see etc/WARRANTY, sections 10 and 11)
applies. At this point in time, it is the version that most developers
are using for their daily work. However, it is certain that many bugs
remain and new ones will be introduced as development proceeds. Be sure
to take care to save your work often and follow a regular backup regime.
Note that part of the release process requires a build and test cycle
with no regressions. However, building and testing on the release
engineer's host is all the quality assurance that is done for most
beta releases. Make sure you checkpoint to a known good version of
XEmacs (a CVS tag or tarball) before overwriting your source tree.
* Availability
Anonymous ftp:
ftp://ftp.xemacs.org/pub/xemacs/xemacs-21.5
See http://www.xemacs.org/Install/ for more information about building
from source.
If you already have a 21.5.24 source tree, a patchkit is available in
xemacs-21.5.24-21.5.25.patch.gz. This does not update .elcs or .infos,
they will be rebuilt when you make XEmacs. If you have an earlier
version, you can repeatedly apply patchkits.
We thank our hosts at Tux.org, and numerous mirrors around the world,
for providing space and bandwidth for distributing XEmacs.
Also, if you don't have the packages yet, see
http://www.xemacs.org/Documentation/packageGuide.html.
Anonymous (pserver) CVS:
Anonymous CVS is available. We are very grateful to the staff at our
host, dotsrc.org (formerly SunSITE.dk), for a lot of help and quick
response to all our requests.
Take care that your Root is set correctly to
CVSROOT=:pserver:cvs＠cvs.xemacs.org:/pack/xemacscvs
On platforms with a Bourne shell and find available, something like
for r in `find . -name Root`; do echo $CVSROOT > $r; done
will convert your entire tree.
To make it straightforward to access certain versions of the code, we have
a standard tagging policy. To update to release 21.5.25, use the update
flag "-r r21-5-25". To update to the current release without referring to
it specifically, use the flag "-r r21-5-current-beta". To update to the
latest commits in CVS, use the flag "-A". Then rebuild XEmacs.
For more details, see
http://www.xemacs.org/Develop/cvsaccess.html
or the ViewCVS interface at
http://cvs.xemacs.org/
* Brief summary of Changes to XEmacs 21.5.25 "eggplant"
Major Features and Backward Incompatible Changes
-- Fix: crash due to broken initialization of syntax cache. -- Stephen Turnbull
-- Fix: crash due to incomplete Mule-ization of x_font_instance_truename. -- Stephen Turnbull
-- Improve: configure UI for packages. -- Mike Sperber
User-Visible Bug Fixes and Minor Improvements
-- Fix: default char-syntax of CJK to ?w failed. -- Aidan Kehoe
-- Fix: missing fonts due to MAX_FONT_COUNT = 5000 isn't infinite any more. -- Aidan Kehoe
-- Fix: missing setlocale(3) initialization in Mule. -- Aidan Kehoe
-- Improve: Java support in font-lock. -- Martin Buchholz
-- Improve: Russian C-x processing. -- Aidan Kehoe
-- Improve: use logical "beta" path to downloads. -- Adrian
-- New: euc-cn coding system alias for cn-gb-2312. -- Aidan Kehoe
-- Update: package download sites. -- Adrian Aichner
Build Infrastructure
-- Fix: conditionalization of checks for Xft library. -- Mike Sperber
-- Fix: deletion of user-created links in distclean. -- Mike Sperber
-- Fix: reporting of Xft in Installation. -- Stephen Turnbull
-- Improve: cygwin include and no-X Xpm handling in configure. -- Vin Shelton
Documentation
-- Improve: comments. -- Aidan Kehoe, Stephen Turnbull
-- New: node on keyboards with which one can't type Latin. -- Aidan Kehoe
-- Update: Info docs for new package-path configuratin syntax. -- Mike Sperber
Lisp API
-- New: rename command and binding in buffer menu mode. -- Stephen Turnbull
Internal API and Implementation
-- Fix: "not char-or-int-p: nil" bug in easymenu. -- Aidan Kehoe
-- Fix: C++ correctness. -- Marcus Crestani
-- Fix: buggy computation of dynarr size. -- Marcus Crestani
-- Fix: char/event confusion introduced by a GNU Emacs sync. -- Aidan Kehoe
-- Fix: missing hardware-specific X11 keycode initialization. -- Aidan Kehoe
-- Fix: syntax errors. -- Andrey Slusar
-- Fix: workaround missing d_ino field from 'struct dirent'. -- Rick Rankin
-- Fix: x_find_charset_font returned Qunboundp inefficiently. -- Aidan Kehoe
-- Fix: x_find_charset_font wasn't Mule-ized. -- Stephen Turnbull
-- Improve: Cygwin support in MC_ALLOC. -- Marcus Crestani
-- Improve: silence redundant gc cache warning. -- Marcus Crestani
-- Improve: syntax cache factoring and documentation. -- Stephen Turnbull
-------- ChangeLog Entries from ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
2006-02-18 Stephen J. Turnbull <stephen(a)xemacs.org>
* configure.ac (Mule): Mark broken test with ####.
2006-02-18 Stephen J. Turnbull <stephen(a)xemacs.org>
* configure.ac (Mule): Remove obsolete comment on XIM.
2006-01-30 Vin Shelton <acs(a)xemacs.org>
* configure.ac: Simplify cygwin include and no-X Xpm handling.
As of cygwin-1.5.19 (if you're using /bin/gcc),
'gcc -print-file-name=libc.a' (effectively) returns '/lib'
instead of '/usr/lib', so we'll use 'gcc -print-search-dirs'
instead.
2005-12-29 Mike Sperber <mike(a)xemacs.org>
* Makefile.in.in (top-distclean-noconfig): Don't delete
site-packages xemacs-packages mule-packages site-lisp---those are
supposed to stick around.
2005-11-25 Mike Sperber <mike(a)xemacs.org>
* CHANGES-beta:
* configure.ac: Zap --with-package-prefix; instead, add
--with-user-packages/--with-early-packages,
--with-system-packages/--with-late-packages, and
--with-legacy-packages/--with-last-packages.
2005-12-13 Mike Sperber <mike(a)xemacs.org>
* configure.ac: Move the checks for the Xft-associated library out
of a conditional.
2005-12-23 Stephen J. Turnbull <stephen(a)xemacs.org>
* configure.ac (Xft): Fix typo preventing report of Xft buffers.
Remove now-irrelevant comments.
2005-12-22 Stephen J. Turnbull <stephen(a)xemacs.org>
* configure.ac: Three typos fixed.
2005-12-13 Mike Sperber <mike(a)xemacs.org>
* configure.ac: Move the checks for the Xft-associated
library out of a conditional.
-------- ChangeLog Entries from etc/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
-------- ChangeLog Entries from lib-src/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
-------- ChangeLog Entries from lisp/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
2006-02-05 Aidan Kehoe <kehoea(a)parhasard.net>
* easymenu.el: Update copyright.
* easymenu.el (easy-menu-all-popups):
Add a docstring.
* easymenu.el (easy-menu-add):
Document a bug, rework the function to preserve any existing
non-default mode-popup-menu instead of overwriting it, and not to
bother normalising the menu title (nothing else does).
* easymenu.el (easy-menu-remove):
Restore the default mode-popup-menu instead of leaving an empty
one when we remove the last easy-menu popup.
2004-01-19 Martin Buchholz <martin(a)xemacs.org>
* font-lock.el: Add support for not-so recent changes in Java to
java-mode.
2006-01-08 Aidan Kehoe <kehoea(a)parhasard.net>
* cmdloop.el (read-quoted-char):
Eliminate some char/event confusion introduced by a GNU Emacs
sync.
2006-01-06 Adrian Aichner <adrian(a)xemacs.org>
* package-get.el (package-get-download-sites): Add pt.xemacs.org,
as suggested by Rodrigo Ventura.
* package-get.el (package-get-pre-release-download-sites): Ditto,
with replacement of xemacs-21.5 by beta, which is the logical path
to our beta core and package pre-releases.
2005-12-30 Mike Sperber <mike(a)xemacs.org>
* packages.el (packages-find-all-package-hierarchies): Interpret
EMACSPACKAGEPATH as listing package direcories, not hierarchies.
This fixes a regression introduced in the change on 2005-01-08.
2005-11-25 Mike Sperber <mike(a)xemacs.org>
* packages.el (packages-find-package-hierarchies-named): Use
`file-name-as-directory' to normalize something which may not
have a trailing path separator.
* package-get.el (package-get-package-index-file-location): Fix
essentially bogus definition.
* package-admin.el (package-admin-find-top-directory): Use the
existing variables rather than groking the paths from scratch, and
greatly simplify.
* packages.el (packages-find-all-package-hierarchies):
Take into account `configure-early-package-hierarchies',
`configure-late-package-hierarchies',
`configure-last-package-hierarchies', as set by configure.
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* mule/chinese.el:
* mule/chinese.el ('euc-china): Removed. Shouldn't have been
uncommented in the first place.
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* mule/mule-cmds.el (set-language-environment-coding-systems):
* mule/mule-cmds.el (init-locale-at-early-startup):
Call set-current-locale (the wrapper for setlocale(3)) before
checking the current locale, because the C code doesn't.
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* mule/chinese.el:
Make euc-cn available as a coding system alias for cn-gb-2312, for
the sake of consistency with euc-jp, euc-ko and the FSF.
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* x-win-sun.el (x-win-init-sun):
* x-win-xfree86.el (x-win-init-xfree86):
Initialise the hardware-specific mapping from raw keycodes to the
US key layout.
2005-12-22 Stephen J. Turnbull <stephen(a)xemacs.org>
* buff-menu.el (Buffer-menu-rename): New command.
(Buffer-menu-mode-map): Bind it to ?r.
-------- ChangeLog Entries from lwlib/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
2005-12-21 Andrey Slusar <anrays(a)gmail.com>
* xlwmenu.c (make_drawing_gcs): Fix build with gcc 2.95.
-------- ChangeLog Entries from man/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
2005-11-25 Mike Sperber <mike(a)xemacs.org>
* lispref/packaging.texi (The User View):
* xemacs/startup.texi (Startup Paths):
* xemacs-faq.texi (Q2.1.6): Document new configure options and
environment variables for
package locations.
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* xemacs/keystrokes.texi (Keystrokes):
Add new node on keyboards with which one can't type Latin.
* xemacs/keystrokes.texi (Non-Latin keyboards):
Describe the support for falling back to a US key layout on
keyboards where typing the Roman alphabet is difficult.
-------- ChangeLog Entries from modules/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
-------- ChangeLog Entries from netinstall/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
2005-11-25 Mike Sperber <mike(a)xemacs.org>
* reginfo.h (XEMACS_INFO_XEMACS_EARLY_PACKAGES_KEY)
(XEMACS_INFO_XEMACS_LATE_PACKAGES_KEY)
(XEMACS_INFO_XEMACS_LAST_PACKAGES_KEY): Add.
-------- ChangeLog Entries from nt/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
-------- ChangeLog Entries from nt/installer/Wise/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
-------- ChangeLog Entries from src/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
2006-02-22 Stephen J. Turnbull <stephen(a)xemacs.org>
* syntax.c: Move static functions in syntax_cache page to top.
2006-02-19 Stephen J. Turnbull <stephen(a)xemacs.org>
Fix crash (cf. Holger Schauer <yxz7j7xzk97.fsf(a)gimli.holgi.priv>).
Improve nomenclature (some identifiers were misnamed with
"syntax_table" although they are purely related to syntax cache).
Add lots of comments explaining logic and use of arguments.
* syntax.c (setup_syntax_cache): Fix broken logic that
initialized prev_change and next_change members to Qnil for syntax
caches associated with buffers, triggering an assertion because
the update functions expect those members to markers.
* syntax.c (signal_syntax_cache_extent_changed):
* syntax.c (reset_buffer_syntax_cache_range):
Rename reset_buffer_cache_range to reset_buffer_syntax_cache_range.
* lisp.h (signal_syntax_cache_extent_changed):
* syntax.c (signal_syntax_cache_extent_changed)
* syntax.c (update_syntax_cache):
* extents.c (signal_single_extent_changed):
Rename signal_syntax_table_extent_changed to
signal_syntax_cache_extent_changed.
* lisp.h (signal_syntax_cache_extent_adjust):
* syntax.c (signal_syntax_cache_extent_adjust):
* insdel.c (buffer_delete_range, buffer_insert_string_1):
Rename signal_syntax_table_extent_adjust to
signal_syntax_cache_extent_adjust.
* syntax.h (update_syntax_cache): Fix typo in comment.
2006-02-16 Marcus Crestani <crestani(a)xemacs.org>
* xgccache.c (gc_cache_lookup): Remove "Cache full" warning.
2006-01-21 Marcus Crestani <crestani(a)xemacs.org>
* mc-alloc.c (init_mc_allocator): Cygwin claims to have a 64k
page size, add it.
2006-01-20 Rick Rankin <rrankin1424-xemacs(a)yahoo.com>
* sysdir.h: Workaround missing d_ino field from 'struct dirent'.
2006-01-19 Marcus Crestani <crestani(a)xemacs.org>
* dynarr.c (Dynarr_realloc): Determine size of memory region to
copy correctly, fix types.
* dynarr.c (Dynarr_lisp_realloc): Determine size of memory region
to copy correctly.
* dynarr.c (Dynarr_resize): Call Dynarr_realloc with number of
elements instead of memory region size.
2006-01-19 Marcus Crestani <crestani(a)xemacs.org>
* objects-x.c (x_find_charset_font): Add cast to fix C++ build.
2005-11-25 Mike Sperber <mike(a)xemacs.org>
* nt.c (init_mswindows_environment): Add EMACSEARLYPACKAGES,
EMACSLATEPACKAGES, EMACSLASTPACKAGES.
* config.h.in:
(PATH_EARLY_PACKAGE_DIRECTORIES, PATH_LATE_PACKAGE_DIRECTORIES)
(PATH_LAST_PACKAGE_DIRECTORIES): Add.
* paths.h.in:
(PATH_EARLY_PACKAGE_DIRECTORIES, PATH_LATE_PACKAGE_DIRECTORIES)
(PATH_LAST_PACKAGE_DIRECTORIES): Add.
* emacs.c: Add Vconfigure_early_package_directories,
Vconfigure_late_package_directories,
Vconfigure_last_package_directories.
(complex_vars_of_emacs): Set them.
2005-12-25 Aidan Kehoe <kehoea(a)parhasard.net>
* alloc.c:
* alloc.c (malloc_warning):
* alloc.c (MALLOC_BEGIN):
* alloc.c (FREE_OR_REALLOC_BEGIN):
Revert the alloc warning bugfix, in response to Stephen's mail
87acepzl6e.fsf(a)tleepslib.sk.tsukuba.ac.jp .
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* objects-x.c (x_font_instance_truename):
* objects-x.c (x_find_charset_font):
Reintroduce my change of 2005-12-20 and Stephen's of 2005-12-23,
which my last commit overrode.
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* event-Xt.c:
Add two new lisp variables, x-us-keymap-description and
x-us-keymap-first-keycode to better provide a fallback to the US
layout with keyboards where typing the Roman alphabet and those
punctuation symbols that have command bindings associated with
them is difficult.
* event-Xt.c (x_event_to_emacs_event):
Use those two Lisp variables to improve Russian C-x processing.
* event-stream.c (command_builder_find_leaf):
Make a comment more readable.
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* alloc.c (MALLOC_BEGIN):
Assert that we're either not in malloc, or warning about memory
being low.
* alloc.c (MALLOC_WARNING_BEGIN, MALLOC_WARNING_END):
Add two clauses to set and clear a flag that we're in a low-memory
warning situation.
* alloc.c (malloc_warning):
Move it after the definition of MALLOC_WARNING_BEGIN,
MALLOC_WARNING_END
2005-12-24 Aidan Kehoe <kehoea(a)parhasard.net>
* objects-gtk.c (MAX_FONT_COUNT):
* objects-x.c (MAX_FONT_COUNT): Increase MAX_FONT_COUNT from 5000
to INT_MAX. Applies to both the X and GTK platforms.
2005-12-23 Stephen J. Turnbull <stephen(a)xemacs.org>
* objects-x.c (x_find_charset_font): More mule-ization.
2005-12-23 Stephen J. Turnbull <stephen(a)xemacs.org>
* objects-x.c (x_font_instance_truename): Mule-ize handling of
font name (Xft names are UTF-8). Fixes crash.
2005-12-20 Aidan Kehoe <kehoea(a)parhasard.net>
* objects-x.c (x_find_charset_font):
Return Qnil on no match, not Qunbound. Fixes performance issues
based on the use of this return value in
objects.c:font_instantiate
2005-12-18 Aidan Kehoe <kehoea(a)parhasard.net>
* syntax.c (charset_syntax):
* syntax.c (update_just_this_syntax_table):
* syntax.c (complex_vars_of_syntax):
To my embarrassment, my previous change didn't actually work. This
change makes
(char-syntax (make-char 'chinese-cns11643-1 50 50))
give ?w, the expected result after the last change.
-------- ChangeLog Entries from tests/ChangeLog --------
2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org>
* XEmacs 21.5.25 "eggplant" is released.
--
University of Tsukuba Graduate School of Systems and Information Engineering
http://turnbull.sk.tsukuba.ac.jp Tennodai 1-1-1 Tsukuba 305-8573 JAPAN
Ask not how you can "do" free software business;
ask what your business can "do for" free software.
- 3 participants
- 12 comments
XEmacs Packages have been pre-released (2006-02-28-07)
18 years, 9 months
Norbert Koch
Norbert Koch
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hey there everyone.
I have just added the following packages to the 'Pre-Releases'
directory:
New Packages in Pre-Release:
===========================
semantic-1.20-pkg.tar.gz upstream version: 1.4.4
Previously Announced Packages Still in Pre-Release:
==================================================
ediff-1.62-pkg.tar.gz upstream version: 2.75
edit-utils-2.33-pkg.tar.gz upstream version: none
erc-0.20-pkg.tar.gz upstream version: Version 5.1.1 Revision: 1.796.2.3
jde-1.49-pkg.tar.gz upstream version: 2.3.2
os-utils-1.37-pkg.tar.gz upstream version: none
riece-1.22-pkg.tar.gz upstream version: 2.0.2
tramp-1.30-pkg.tar.gz upstream version: 2.0.52
viper-1.48-pkg.tar.gz upstream version: 3.09
Detailed Changes:
================
- ------- ChangeLog Entries from xemacs-packages/semantic/ChangeLog -------
2006-02-28 Norbert Koch <viteno(a)xemacs.org>
* Makefile (VERSION): XEmacs package 1.20 released.
2006-02-26 Ville Skyttä <scop(a)xemacs.org>
* Sync with upstream 1.4.4.
Installing These:
================
Manually:
- --------
1) Download the packages that you want to install from:
/ftp.xemacs.org:/pub/xemacs/beta/experimental/packages/
2) Unpack them to: [1]
/usr/local/lib/xemacs/xemacs-packages/
3) Re-start XEmacs.
Using XEmacs Package Tools (XEmacs 21.[245].x):
- ----------------------------------------------
1) Tools -> Packages -> Add Download Site -> Pre-Releases
2) Tools -> Packages -> List and Install
3) Select the packages you wish to install (there are brief
instructions at the bottom of the packages buffer).
4) Packages -> Install/Remove Selected
5) Re-start XEmacs.
Using XEmacs Package Tools (XEmacs 21.1.14):
- -------------------------------------------
1) Options -> Manage Packages -> Add Download Site -> Pre-Releases
2) Options -> Manage Packages -> List and Install
3 - 5) As per XEmacs 21.[245].x.
norbert - XEmacs Package Release Manager.
Footnotes:
[1] Note: Mule packages should be installed into:
/usr/local/lib/xemacs/mule-packages/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
iD8DBQFEA+15gu3ywdHdhM0RAqbOAJ9xOuqJG9mW1h80C3Ms4u3mYORA2gCgmSx4
upK+oP3vAf1UCkpBZx/449k=
=ETKQ
-----END PGP SIGNATURE-----
- 2 participants
- 2 comments
[Bug: 21.4.18] segfault on startup due to font lock settings
18 years, 9 months
zooko
zooko
================================================================
Dear Bug Team!
Thank you for XEmacs! I have the following reproducible segfault:
when my .xemacs/custom.el file has this contents (and nothing else) then
starting xemacs segfaults (unless -no-init-file):
(custom-set-variables
'(font-lock-mode t nil (font-lock)))
But when my .xemacs/custom.el file has this contents (and nothing else) then
starting xemacs works:
;;(custom-set-variables
;; '(font-lock-mode t nil (font-lock)))
I would be happy to run further experiments, provide results strace, debuggery,
valgrind, etc.
Regards,
Zooko
================================================================
System Info to help track down your bug:
---------------------------------------
uname -a: Linux yellow 2.6.8.1 #1 SMP Mon Jul 18 14:11:24 UTC 2005 x86_64 GNU/Linux
./configure '--with-sound=none,native' '--with-x11' '--extra-verbose' '--with-site-lisp' '--with-database=berkdb' '--statedir=/var/lib' '--infodir=/usr/share/info/xemacs21' '--infopath=/usr/share/info/xemacs21' '--with-gtk' '--with-gnome' '--docdir=/usr/lib/xemacs-21.4.18/amd64-debian-linux/gnome-nomule/' '--with-mule=no' '--package-path=~/.xemacs:~/.xemacs/packages:~/.xemacs/xemacs-packages::/usr/share/xemacs21/site-packages:/usr/share/xemacs21/xemacs-packages' 'amd64-debian-linux'
XEmacs 21.4.18 "Social Property" configured for `x86_64-debian-linux'.
Compilation / Installation:
Source code location: /build/buildd/xemacs21-21.4.18
Installation prefix: /usr/local
Operating system description file: `s/linux.h'
Not using any machine description file
Compiler: gcc -g -O3 -Wall -Wno-switch -Winline -Wmissing-prototypes -Wsign-compare -Wshadow
Compiler version: gcc-4.0.gcc-opt (GCC) 4.0.3 20051204 (prerelease) (Ubuntu 4.0.2-5ubuntu2)
Compiler specs file: specs.
Relocating allocator for buffers: no
GNU version of malloc: yes
- Using Doug Lea's new malloc from the GNU C Library.
Need to guess glibc1/2/etc here
Window System:
Using GTK menubars.
Using GTK scrollbars.
Using GTK dialog boxes.
Using GTK native widgets.
TTY:
Compiling in support for ncurses.
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Compiling in support for X-Face message headers.
Sound:
Compiling in support for sound (native).
Databases:
Compiling in support for Berkeley database.
Compiling in support for LDAP.
Internationalization:
Mail:
Compiling in support for "dot-locking" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for dynamic shared object modules.
Using the new portable dumper.
Load-Path Lisp Shadows:
----------------------
(/usr/share/xemacs21/site-lisp/dictionaries-common/ispell
/usr/share/xemacs21/site-lisp/dictionaries-common/ispell
/usr/share/xemacs21/site-lisp/dictionaries-common/debian-ispell
/usr/share/xemacs21/site-lisp/dictionaries-common/debian-ispell
/usr/share/xemacs21/site-lisp/debian-startup
/usr/share/emacs/site-lisp/debian-startup /etc/emacs/site-start
/usr/share/xemacs21/site-packages/lisp/site-start
/usr/share/xemacs21/site-lisp/dictionaries-common/ispell
/usr/share/xemacs21/xemacs-packages/lisp/ispell/ispell
/usr/share/xemacs21/xemacs-packages/lisp/build/build-report
/usr/lib/xemacs-21.4.18/lisp/build-report)
Installed XEmacs Packages:
-------------------------
(zenirc ver: 1.16 upstream: 2.112)
(xwem ver: 1.21 upstream: lg(a)xwem.org--2005/xwem--main--2.1--versionfix-1)
(xslt-process ver: 1.12 upstream: 1.2.1)
(xslide ver: 1.09 upstream: 0.2.2)
(xlib ver: 1.14 upstream: lg(a)xwem.org--2005/xlib--main--2.1--version-0)
(xetla ver: 1.0 upstream: steve(a)eicq.org--2005/xetla--main--1.0--version-0)
(xemacs-devel ver: 1.72 upstream: No-Upstream-Ver)
(xemacs-base ver: 2.0 upstream: No-Upstream-Ver)
(x-symbol ver: 1.1 upstream: 4.5.1)
(w3 ver: 1.31 upstream: 4.0pre47)
(vm ver: 7.22 upstream: 7.17)
(viper ver: 1.47 upstream: 3.09)
(view-process ver: 1.13 upstream: 2.4)
(vhdl ver: 1.2 upstream: 3.33.2)
(vc-cc ver: 1.22 upstream: No-Upstream-Ver)
(vc ver: 1.41 upstream: No-Upstream-Ver)
(tramp ver: 1.28 upstream: 2.0.51)
(tpu ver: 1.14 upstream: 4.2X)
(tooltalk ver: 1.15 upstream: No-Upstream-Ver)
(tm ver: 1.38 upstream: No-Upstream-Ver)
(time ver: 1.14 upstream: 1.17)
(textools ver: 1.15 upstream: No-Upstream-Ver)
(text-modes ver: 1.9 upstream: No-Upstream-Ver)
(texinfo ver: 1.3 upstream: No-Upstream-Ver)
(supercite ver: 1.21 upstream: 3.55x3)
(strokes ver: 1.1 upstream: No-Upstream-Ver)
(speedbar ver: 1.28 upstream: 0.14beta4)
(sounds-wav ver: 1.12 upstream: No-Upstream-Ver)
(sounds-au ver: 1.12 upstream: No-Upstream-Ver)
(sml-mode ver: 0.12 upstream: 3.9.5)
(slider ver: 1.15 upstream: 0.3x1)
(sieve ver: 1.18 upstream: No-Upstream-Ver)
(sh-script ver: 1.21 upstream: 2.0f)
(sgml ver: 1.11 upstream: No-Upstream-Ver)
(semantic ver: 1.19 upstream: 1.4.2)
(scheme ver: 1.14 upstream: No-Upstream-Ver)
(sasl ver: 1.16 upstream: 1.14.4)
(ruby-modes ver: 1.02 upstream: 1.6.8)
(rmail ver: 1.14 upstream: No-Upstream-Ver)
(riece ver: 1.21 upstream: 2.0.2)
(reftex ver: 1.34 upstream: 4.21)
(re-builder ver: 1.05 upstream: 1.20)
(python-modes ver: 1.06 upstream: No-Upstream-Ver)
(psgml-dtds ver: 1.03 upstream: No-Upstream-Ver)
(psgml ver: 1.44 upstream: 1.3.1)
(ps-print ver: 1.11 upstream: 6.5.6)
(prog-modes ver: 2.06 upstream: No-Upstream-Ver)
(pgg ver: 1.06 upstream: 0.1)
(perl-modes ver: 1.08 upstream: No-Upstream-Ver)
(pcomplete ver: 1.04 upstream: 1.1.6)
(pcl-cvs ver: 1.66 upstream: R-2_9_9)
(pc ver: 1.28 upstream: No-Upstream-Ver)
(os-utils ver: 1.36 upstream: No-Upstream-Ver)
(oo-browser ver: 1.04 upstream: 4.08)
(ocaml ver: 0.05 upstream: 3.06)
(net-utils ver: 1.48 upstream: N/A)
(mmm-mode ver: 1.02 upstream: 0.4.7)
(misc-games ver: 1.18 upstream: No-Upstream-Ver)
(mine ver: 1.16 upstream: 1.9)
(mh-e ver: 1.29 upstream: 7.4.2)
(mew ver: 1.19 upstream: 1.94.2)
(mailcrypt ver: 2.14 upstream: 3.5.8)
(mail-lib ver: 1.75 upstream: No-Upstream-Ver)
(jde ver: 1.48 upstream: 2.3.2)
(ispell ver: 1.32 upstream: 3.6)
(ilisp ver: 1.33 upstream: 5.12.0)
(igrep ver: 1.14 upstream: 2.111)
(idlwave ver: 1.32 upstream: 5.1)
(ibuffer ver: 1.09 upstream: No-Upstream-Ver)
(hyperbole ver: 1.16 upstream: 4.18)
(hm--html-menus ver: 1.23 upstream: 5.9)
(haskell-mode ver: 1.07 upstream: 1.45)
(gnus ver: 1.87 upstream: 5.10.7)
(gnats ver: 1.17 upstream: 3.101)
(general-docs ver: 1.04 upstream: No-Upstream-Ver)
(games ver: 1.17 upstream: 1.04)
(fsf-compat ver: 1.15 upstream: No-Upstream-Ver)
(frame-icon ver: 1.11 upstream: No-Upstream-Ver)
(fortran-modes ver: 1.04 upstream: No-Upstream-Ver)
(forms ver: 1.15 upstream: 2.37)
(footnote ver: 1.16 upstream: 0.18x)
(eudc ver: 1.39 upstream: 1.32)
(eterm ver: 1.17 upstream: No-Upstream-Ver)
(eshell ver: 1.1 upstream: 2.4.1)
(escreen ver: 1.01 upstream: 1.16)
(erc ver: 0.19 upstream: Version 5.0 Revision: 1.776)
(emerge ver: 1.11 upstream: No-Upstream-Ver)
(elib ver: 1.11 upstream: 1.0)
(eieio ver: 1.05 upstream: 0.17)
(efs ver: 1.33 upstream: 1.23)
(edt ver: 1.13 upstream: No-Upstream-Ver)
(edit-utils ver: 2.32 upstream: No-Upstream-Ver)
(ediff ver: 1.6 upstream: 2.75)
(edebug ver: 1.21 upstream: No-Upstream-Ver)
(ecrypto ver: 0.2 upstream: 2.0)
(ecb ver: 1.22 upstream: 2.31)
(docbookide ver: 0.07000000000000001 upstream: 0.1)
(dired ver: 1.17 upstream: 7.13)
(dictionary ver: 1.16 upstream: 1.8)
(debug ver: 1.17 upstream: No-Upstream-Ver)
(crisp ver: 1.15 upstream: 1.34)
(cookie ver: 1.15 upstream: No-Upstream-Ver)
(clearcase ver: 1.1 upstream: /main/laptop/165)
(cc-mode ver: 1.45 upstream: 5.30.10)
(calendar ver: 1.23 upstream: No-Upstream-Ver)
(calc ver: 1.26 upstream: 2.02fX3)
(c-support ver: 1.22 upstream: No-Upstream-Ver)
(build ver: 1.14 upstream: 2.02)
(bbdb ver: 1.29 upstream: 2.34)
(auctex ver: 1.46 upstream: 11.55)
(apel ver: 1.32 upstream: 10.6)
(ada ver: 1.14 upstream: 2.27)
(Sun ver: 1.16 upstream: No-Upstream-Ver)
Installed Modules:
-----------------
Features:
--------
(mail-abbrevs xemacsbug shadow sendmail rfc822 ispell mwheel
zenirc-autoloads xwem-autoloads xslt-process-autoloads
xslide-autoloads xlib-autoloads xetla-autoloads xemacs-devel-autoloads
xemacs-base-autoloads x-symbol-autoloads w3-autoloads vm-autoloads
viper-autoloads view-process-autoloads vhdl-autoloads vc-cc-autoloads
vc-autoloads tramp-autoloads tpu-autoloads tooltalk-autoloads
tm-autoloads time-autoloads textools-autoloads text-modes-autoloads
texinfo-autoloads supercite-autoloads strokes-autoloads
speedbar-autoloads sounds-wav-autoloads sounds-au-autoloads
sml-mode-autoloads slider-autoloads sieve-autoloads
sh-script-autoloads sgml-autoloads semantic-autoloads scheme-autoloads
sasl-autoloads ruby-modes-autoloads rmail-autoloads riece-autoloads
reftex-autoloads re-builder-autoloads python-modes-autoloads
psgml-dtds-autoloads psgml-autoloads ps-print-autoloads
prog-modes-autoloads pgg-autoloads perl-modes-autoloads
pcomplete-autoloads pcl-cvs-autoloads pc-autoloads os-utils-autoloads
oo-browser-autoloads ocaml-autoloads net-utils-autoloads
mmm-mode-autoloads misc-games-autoloads mine-autoloads mh-e-autoloads
mew-autoloads mailcrypt-autoloads mail-lib-autoloads jde-autoloads
ispell-autoloads ilisp-autoloads igrep-autoloads idlwave-autoloads
ibuffer-autoloads hyperbole-autoloads hm--html-menus-autoloads
haskell-mode-autoloads gnus-autoloads gnats-autoloads
general-docs-autoloads games-autoloads fsf-compat-autoloads
frame-icon-autoloads fortran-modes-autoloads forms-autoloads
footnote-autoloads eudc-autoloads eterm-autoloads eshell-autoloads
escreen-autoloads erc-autoloads emerge-autoloads elib-autoloads
eieio-autoloads efs-autoloads edt-autoloads edit-utils-autoloads
ediff-autoloads edebug-autoloads ecrypto-autoloads ecb-autoloads
docbookide-autoloads dired-autoloads dictionary-autoloads
debug-autoloads crisp-autoloads cookie-autoloads clearcase-autoloads
cc-mode-autoloads calendar-autoloads calc-autoloads
c-support-autoloads build-autoloads bbdb-autoloads auctex-autoloads
apel-autoloads ada-autoloads Sun-autoloads lisp-autoloads loadhist
auto-show fontl-hooks widgets-gtk dialog-gtk gtk-file-dialog
gtk-password-dialog gtk-iso8859-1 x-iso8859-1 gdk gtk-ffi gutter-items
menubar-items x-menubar mode-motion mouse itimer auto-save lisp-mode
easymenu iso8859-1 page buff-menu lib-complete help-nomule cus-file
derived frame text-props obsolete cus-start custom widget cl-extra
mini-cl cl cl-19 packages backquote very-early-lisp gtk-scrollbars
gtk-menubars gtk-ui gtk-dialogs gtk tty-frames tty toolbar
native-sound scrollbar unix-processes multicast network-streams
subprocesses modules menu-accelerator-support menubar berkeley-db md5
xemacs gutter tiff png gif jpeg xface xpm xbm lisp-float-type linux
dialog devices window-system base64)
Recent keystrokes:
-----------------
M-x r e p TAB o TAB r TAB x e TAB RET
Recent messages (most recent first):
-----------------------------------
Loading xemacsbug...done
Loading xemacsbug...
Making completion list...
Making completion list...
Loading 50vc-svn...done
Loading 50vc-svn...
Loading 50sawfish...done
Loading 50sawfish...
Loading 50python-docutils...done
Loading 50python-docutils...
Loading 50psvn...done
Loading 50psvn...
Loading 50mailutils-mh...done
Loading 50mailutils-mh...
Loading 50festival...done
Loading 50festival...
Loading 50dictionaries-common...done
Loading ispell...done
Loading ispell...
Loading /var/cache/dictionaries-common/emacsen-ispell-dicts.el...done
- 2 participants
- 2 comments