October 2005 - XEmacs-Patches - XEmacs Mailing List Archives

[COMMIT] fix optimization handling in configure.ac 19 years, 2 months

Ben Wing

NOTE: This patch has been committed. ChangeLog addition: 2005-10-13 Ben Wing <ben(a)xemacs.org> * configure.ac (XE_COMPLEX_ARG_ENABLE): Break lines. * configure.ac (TAB): Rewrite optimization help to be accurate. Setting `--with-cflags-optimization=""' will now unilaterally turn off optimization; setting it to something non-null unilaterally turns it on. build source patch: Diff command: bash -ci "cvs-diff --show-c-function -no-changelog " Files affected: configure.ac Index: configure.ac =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/configure.ac,v retrieving revision 1.13 diff -u -p -r1.13 configure.ac --- configure.ac 2005/09/19 00:36:02 1.13 +++ configure.ac 2005/10/14 00:55:42 ＠＠ -757,16 +757,16 ＠＠ AC_ARG_WITH([compiler], [], []) AC_ARG_WITH([xemacs-compiler], - AC_HELP_STRING([--with-xemacs-compiler],[compiler to use to compile just the xemacs executable and C modules. + AC_HELP_STRING([--with-xemacs-compiler], + [compiler to use to compile just the xemacs executable and C modules. If you want to compile XEmacs as C++, use e.g. `--with-xemacs-compiler=g++'. This turns on a lot of additional error-checking.]), [], []) AC_ARG_WITH([cflags], - AC_HELP_STRING([--with-cflags],[Compiler flags (such as -O); setting this overrides - all default compiler flags except those that control - warnings.]), + AC_HELP_STRING([--with-cflags], + [Compiler flags. These flags will be placed after any flags inserted for warnings, debugging or optimization; setting this does not disable the insertion of those flags. Use configure settings such as `--with-optimization=no' or `enable-debug=no' to turn them off, or override them with `--with-cflags-optimization', `--with-cflags-debugging', or `with-cflags-warning'.]), [], []) AC_ARG_WITH([cflags-warning], ＠＠ -777,7 +777,7 ＠＠ AC_ARG_WITH([cflags-warning], AC_ARG_WITH([cflags-optimization], AC_HELP_STRING([--with-cflags-optimization=FLAGS], - [Override compiler flags used to control optimization. Only has an effect when optimization is enabled. Normally, don't set this, as XEmacs will already set the maximum safe optimization flags appropriate for the compiler being invoked.]), + [Override compiler flags used to control optimization. If blank, forces no optimization; if non-blank, forces optimization. Normally, don't set this; XEmacs automatically sets the maximum safe optimization flags appropriate for the compiler being invoked. If you just want to turn optimization on or off, use `with-optimization' instead.]), [], []) AC_ARG_WITH([cflags-debugging], ＠＠ -2074,7 +2074,15 ＠＠ dnl Calculate optimization flags. These dnl versions and on in release versions. if test -z "$with_optimization"; then - if test -z "$emacs_is_beta" -o "$cflags_optimization_specified" = "yes"; then + # If user set --with-cflags-optimization, use it to unilaterally + # determine whether optimization should be enabled. + if test "$cflags_optimization_specified" = "yes" ; then + if -z "$with_cflags_optimization" ; then + with_optimization=no + else + with_optimization=yes + fi + elif test -z "$emacs_is_beta" ; then with_optimization=yes else with_optimization=no

1 participants
0 comments

[COMMIT] Include config.h in lib-src progs 19 years, 2 months

Ben Wing

NOTE: This patch has been committed. lib-src/ChangeLog addition: 2005-10-13 Ben Wing <ben(a)xemacs.org> * i.c: * mmencode.c: Always include config.h first. * winclient.c: Move include of windows.h after config.h. build source patch: Diff command: bash -ci "cvs-diff --show-c-function -no-changelog " Files affected: lib-src/winclient.c lib-src/mmencode.c lib-src/i.c cvs server: Diffing lib-src Index: lib-src/i.c =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lib-src/i.c,v retrieving revision 1.5 diff -u -p -r1.5 i.c --- lib-src/i.c 2004/12/07 00:20:51 1.5 +++ lib-src/i.c 2005/10/14 01:01:31 ＠＠ -31,6 +31,10 ＠＠ does. It can be used also when xemacs s command ina script, especially when its standart output should be obtained programmatically. */ +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif + #include <windows.h> #include <stdio.h> #include <string.h> Index: lib-src/mmencode.c =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lib-src/mmencode.c,v retrieving revision 1.8 diff -u -p -r1.8 mmencode.c --- lib-src/mmencode.c 2001/08/13 04:45:48 1.8 +++ lib-src/mmencode.c 2005/10/14 01:01:32 ＠＠ -13,6 +13,9 ＠＠ OF THIS MATERIAL FOR ANY PURPOSE. IT IS WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. */ +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif #define NEWLINE_CHAR '\n' #include <stdlib.h> #include <stdio.h> Index: lib-src/winclient.c =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lib-src/winclient.c,v retrieving revision 1.3 diff -u -p -r1.3 winclient.c --- lib-src/winclient.c 2002/05/28 08:44:26 1.3 +++ lib-src/winclient.c 2005/10/14 01:01:32 ＠＠ -22,10 +22,11 ＠＠ /* -- Includes -------------------------------------------------------------- */ -#include <windows.h> #ifdef HAVE_CONFIG_H # include <config.h> #endif +#include <windows.h> +#include <ddeml.h> #include <stdlib.h> #include <stdio.h> #include <ctype.h>

1 participants
0 comments

smtpmail.el minor fix 19 years, 2 months

Hrvoje Niksic

smptpmail.el is extremely badly written, but using `beginning-of-buffer' and `kill-line' is too much. I've had this patch in my queue for a while now. Since I no longer use smtpmail, I'd better send it here before it gets lost: --- smtpmail.el.orig 2004-06-13 13:32:00.000000000 +0200 +++ smtpmail.el 2004-06-13 13:34:09.000000000 +0200 ＠＠ -388,7 +388,7 ＠＠ ;;; mail, send it, etc... (let ((file-msg "")) (insert-file-contents smtpmail-queue-index) - (beginning-of-buffer) + (goto-char (point-min)) (while (not (eobp)) (setq file-msg (buffer-substring (point) (point-at-eol))) ;; XEmacs (load file-msg) ＠＠ -405,7 +405,7 ＠＠ (error "Sending failed; no recipients"))) (delete-file file-msg) (delete-file (concat file-msg ".el")) - (kill-line 1)) + (delete-region (point) (save-excursion (forward-line 1) (point)))) (write-region (point-min) (point-max) smtpmail-queue-index)))) ;(defun smtpmail-via-smtp (host,port,sender,destination,smtpmail-text-buffer)

1 participants
0 comments

[AC] [PACKAGES (xemacs-base)] fix with-timeout 19 years, 2 months

Steve Youngs

APPROVE COMMIT This was posted to -beta a little while ago... Message-ID: <m364sn2kza.fsf(a)uh-oh.nvidia.com> After testing, it works great. Thanks very much tbennett! Norbert, this change will mean that you'll have to roll new packages for: apel bbdb gnus liece (shouldn't this be retired now we have Riece?) net-utils tramp xemacs-devel As well as xemacs-base of course. NOTE: This patch has been committed. xemacs-base patch: ChangeLog files diff command: cvs -q diff -U 0 Files affected: ChangeLog Source files diff command: cvs -q diff -uN Files affected: timer-funcs.el Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/packages/xemacs-packages/xemacs-base/ChangeLog,v retrieving revision 1.169 diff -u -p -U0 -r1.169 ChangeLog --- ChangeLog 24 Jul 2005 09:03:06 -0000 1.169 +++ ChangeLog 11 Oct 2005 11:04:04 -0000 ＠＠ -0,0 +1,6 ＠＠ +2005-10-11 Steve Youngs <steve(a)sxemacs.org> + + * timer-funcs.el (with-timeout): Use `unwind-protect' to ensure + the timer is always deleted. + From: tbennett(a)nvidia.com + Index: timer-funcs.el =================================================================== RCS file: /pack/xemacscvs/XEmacs/packages/xemacs-packages/xemacs-base/timer-funcs.el,v retrieving revision 1.1 diff -u -p -u -r1.1 timer-funcs.el --- timer-funcs.el 22 Oct 2004 15:23:09 -0000 1.1 +++ timer-funcs.el 11 Oct 2005 11:03:50 -0000 ＠＠ -181,16 +181,18 ＠＠ be detected." (timeout-forms (cdr list))) `(let ((with-timeout-tag (cons nil nil)) with-timeout-value with-timeout-timer) - (when (catch with-timeout-tag - (progn - (setq with-timeout-timer - (start-itimer "with-timeout" #'with-timeout-handler - ,seconds nil nil t with-timeout-tag)) - (setq with-timeout-value (progn ,＠body)) - nil)) - ,＠timeout-forms - (delete-itimer with-timeout-timer) - with-timeout-value)))) + (unwind-protect + (when (catch with-timeout-tag + (progn + (setq with-timeout-timer + (start-itimer "with-timeout" #'with-timeout-handler + ,seconds nil nil t with-timeout-tag)) + (setq with-timeout-value (progn ,＠body)) + nil)) + ,＠timeout-forms + with-timeout-value) + (delete-itimer with-timeout-timer))))) + ;;;###autoload (defun y-or-n-p-with-timeout (prompt seconds default-value) -- |---<Steve Youngs>---------------<GnuPG KeyID: A94B3003>---| | I am Dyslexic of Borg. | | Fusistance is retile. Your arse will be laminated. | |------------------------------------<steve(a)sxemacs.org>---|

4 participants
3 comments

[PACKAGES (tramp)] Another fsf-compat dependency bites the dust 19 years, 2 months

Steve Youngs

This change means that Tramp is no longer dependent on the fsf-compat package. And I found a dependency that was missing... sh-script (for `executable-find'). Michael, I haven't committed this, but if you want me to, just yell.:-) tramp patch: ChangeLog files diff command: cvs -q diff -U 0 Files affected: lisp/ChangeLog ChangeLog Source files diff command: cvs -q diff -uN Files affected: lisp/tramp.el Makefile Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/packages/xemacs-packages/tramp/ChangeLog,v retrieving revision 1.53 diff -u -p -U0 -r1.53 ChangeLog --- ChangeLog 9 Oct 2005 11:54:41 -0000 1.53 +++ ChangeLog 11 Oct 2005 10:08:00 -0000 ＠＠ -0,0 +1,5 ＠＠ +2005-10-11 Steve Youngs <steve(a)sxemacs.org> + + * Makefile (REQUIRES): Remove fsf-compat, add sh-script (for + executable-find). + Index: Makefile =================================================================== RCS file: /pack/xemacscvs/XEmacs/packages/xemacs-packages/tramp/Makefile,v retrieving revision 1.53 diff -u -p -u -r1.53 Makefile --- Makefile 9 Oct 2005 11:54:41 -0000 1.53 +++ Makefile 11 Oct 2005 10:07:43 -0000 ＠＠ -22,7 +22,7 ＠＠ AUTHOR_VERSION = 2.0.51 MAINTAINER = Kai Großjohann <kai.grossjohann(a)gmx.net> PACKAGE = tramp PKG_TYPE = regular -REQUIRES = tramp xemacs-base vc fsf-compat efs dired mail-lib gnus ediff +REQUIRES = tramp xemacs-base vc efs dired mail-lib gnus ediff sh-script CATEGORY = standard include ../../Local.rules.inc Index: lisp/ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/packages/xemacs-packages/tramp/lisp/ChangeLog,v retrieving revision 1.28 diff -u -p -U0 -r1.28 ChangeLog --- lisp/ChangeLog 8 Oct 2005 15:02:20 -0000 1.28 +++ lisp/ChangeLog 11 Oct 2005 10:08:11 -0000 ＠＠ -0,0 +1,5 ＠＠ +2005-10-11 Steve Youngs <steve(a)sxemacs.org> + + * tramp.el: Require `timer-funcs' instead of `timer' if in + XEmacs. + Index: lisp/tramp.el =================================================================== RCS file: /pack/xemacscvs/XEmacs/packages/xemacs-packages/tramp/lisp/tramp.el,v retrieving revision 1.28 diff -u -p -u -r1.28 tramp.el --- lisp/tramp.el 8 Oct 2005 15:02:20 -0000 1.28 +++ lisp/tramp.el 11 Oct 2005 10:07:49 -0000 ＠＠ -68,7 +68,10 ＠＠ ;; The Tramp version number and bug report address, as prepared by configure. (require 'trampver) -(require 'timer) +(if (featurep 'xemacs) + (require 'timer-funcs) + (require 'timer)) + (require 'format-spec) ;from Gnus 5.8, also in tar ball ;; As long as password.el is not part of (X)Emacs, it shouldn't ;; be mandatory -- |---<Steve Youngs>---------------<GnuPG KeyID: A94B3003>---| | I am Dyslexic of Borg. | | Fusistance is retile. Your arse will be laminated. | |------------------------------------<steve(a)sxemacs.org>---|

3 participants
4 comments

[PATCH] Sync sh-script.el with GNU Emacs 21.4 (2) 19 years, 2 months

Jérôme Marant

Hi, This is the second version of the patch including Adrian's remarks as well as changes from Malcolm. BTW, shall Malcolm's changes be more precisely documented? Regards, ChangeLog addition: 2005-10-10 Jérôme Marant <jmarant(a)free.fr> * sh-script.el: Sync with GNU Emacs 21.4 Update FSF's address in GPL notices. XEmacs packages sh-script source patch: Diff command: cvs -q diff -u Files affected: sh-script.el Index: sh-script.el =================================================================== RCS file: /pack/xemacscvs/XEmacs/packages/xemacs-packages/sh-script/sh-script.el,v retrieving revision 1.8 diff -u -r1.8 sh-script.el --- sh-script.el 2003/01/06 18:31:31 1.8 +++ sh-script.el 2005/10/10 20:47:16 ＠＠ -1,9 +1,10 ＠＠ ;;; sh-script.el --- shell-script editing commands for Emacs -;; Copyright (C) 1993, 94, 95, 96, 1997 by Free Software Foundation, Inc. +;; Copyright (C) 1993, 94, 95, 96, 97, 1999, 2001 +;; Free Software Foundation, Inc. ;; Author: Daniel Pfeiffer <occitan(a)esperanto.org> -;; Version: 2.0e +;; Version: 2.0f ;; Maintainer: FSF ;; Keywords: languages, unix ＠＠ -21,10 +22,10 ＠＠ ;; You should have received a copy of the GNU General Public License ;; along with XEmacs; see the file COPYING. If not, write to the Free -;; Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -;; 02111-1307, USA. +;; Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA +;; 02110-1301, USA. -;;; Synched up with: FSF 20.7. +;;; Synched up with: FSF 21.4. ;;; Commentary: ＠＠ -40,25 +41,166 ＠＠ ;; - Variables in `"' strings aren't fontified because there's no way of ;; syntactically distinguishing those from `'' strings. +;; Indentation +;; =========== +;; Indentation for rc and es modes is very limited, but for Bourne shells +;; and its derivatives it is quite customizable. +;; +;; The following description applies to sh and derived shells (bash, +;; zsh, ...). +;; +;; There are various customization variables which allow tailoring to +;; a wide variety of styles. Most of these variables are named +;; sh-indent-for-XXX and sh-indent-after-XXX. For example. +;; sh-indent-after-if controls the indenting of a line following +;; an if statement, and sh-indent-for-fi controls the indentation +;; of the line containing the fi. +;; +;; You can set each to a numeric value, but it is often more convenient +;; to a symbol such as `+' which uses the value of variable `sh-basic-offset'. +;; By changing this one variable you can increase or decrease how much +;; indentation there is. Valid symbols: +;; +;; + Indent right by sh-basic-offset +;; - Indent left by sh-basic-offset +;; ++ Indent right twice sh-basic-offset +;; -- Indent left twice sh-basic-offset +;; * Indent right half sh-basic-offset +;; / Indent left half sh-basic-offset. +;; +;; There are 4 commands to help set the indentation variables: +;; +;; `sh-show-indent' +;; This shows what variable controls the indentation of the current +;; line and its value. +;; +;; `sh-set-indent' +;; This allows you to set the value of the variable controlling the +;; current line's indentation. You can enter a number or one of a +;; number of special symbols to denote the value of sh-basic-offset, +;; or its negative, or half it, or twice it, etc. If you've used +;; cc-mode this should be familiar. If you forget which symbols are +;; valid simply press C-h at the prompt. +;; +;; `sh-learn-line-indent' +;; Simply make the line look the way you want it, then invoke this +;; command. It will set the variable to the value that makes the line +;; indent like that. If called with a prefix argument then it will set +;; the value to one of the symbols if applicable. +;; +;; `sh-learn-buffer-indent' +;; This is the deluxe function! It "learns" the whole buffer (use +;; narrowing if you want it to process only part). It outputs to a +;; buffer *indent* any conflicts it finds, and all the variables it has +;; learned. This buffer is a sort of Occur mode buffer, allowing you to +;; easily find where something was set. It is popped to automatically +;; if there are any conflicts found or if `sh-popup-occur-buffer' is +;; non-nil. +;; `sh-indent-comment' will be set if all comments follow the same +;; pattern; if they don't it will be set to nil. +;; Whether `sh-basic-offset' is set is determined by variable +;; `sh-learn-basic-offset'. +;; +;; Unfortunately, `sh-learn-buffer-indent' can take a long time to run +;; (e.g. if there are large case statements). Perhaps it does not make +;; sense to run it on large buffers: if lots of lines have different +;; indentation styles it will produce a lot of diagnostics in the +;; *indent* buffer; if there is a consistent style then running +;; `sh-learn-buffer-indent' on a small region of the buffer should +;; suffice. +;; +;; Saving indentation values +;; ------------------------- +;; After you've learned the values in a buffer, how to you remember +;; them? Originally I had hoped that `sh-learn-buffer-indent' +;; would make this unnecessary; simply learn the values when you visit +;; the buffer. +;; You can do this automatically like this: +;; (add-hook 'sh-set-shell-hook 'sh-learn-buffer-indent) +;; +;; However... `sh-learn-buffer-indent' is extremely slow, +;; especially on large-ish buffer. Also, if there are conflicts the +;; "last one wins" which may not produce the desired setting. +;; +;; So...There is a minimal way of being able to save indentation values and +;; to reload them in another buffer or at another point in time. +;; +;; Use `sh-name-style' to give a name to the indentation settings of +;; the current buffer. +;; Use `sh-load-style' to load indentation settings for the current +;; buffer from a specific style. +;; Use `sh-save-styles-to-buffer' to write all the styles to a buffer +;; in lisp code. You can then store it in a file and later use +;; `load-file' to load it. +;; +;; Indentation variables - buffer local or global? +;; ---------------------------------------------- +;; I think that often having them buffer-local makes sense, +;; especially if one is using `sh-learn-buffer-indent'. However, if +;; a user sets values using customization, these changes won't appear +;; to work if the variables are already local! +;; +;; To get round this, there is a variable `sh-make-vars-local' and 2 +;; functions: `sh-make-vars-local' and `sh-reset-indent-vars-to-global-values'. +;; +;; If `sh-make-vars-local' is non-nil, then these variables become +;; buffer local when the mode is established. +;; If this is nil, then the variables are global. At any time you +;; can make them local with the command `sh-make-vars-local'. +;; Conversely, to update with the global values you can use the +;; command `sh-reset-indent-vars-to-global-values'. +;; +;; This may be awkward, but the intent is to cover all cases. +;; +;; Awkward things, pitfalls +;; ------------------------ +;; Indentation for a sh script is complicated for a number of reasons: +;; +;; 1. You can't format by simply looking at symbols, you need to look +;; at keywords. [This is not the case for rc and es shells.] +;; 2. The character ")" is used both as a matched pair "(" ... ")" and +;; as a stand-alone symbol (in a case alternative). This makes +;; things quite tricky! +;; 3. Here-documents in a script should be treated "as is", and when +;; they terminate we want to revert to the indentation of the line +;; containing the "<<" symbol. +;; 4. A line may be continued using the "\". +;; 5. The character "#" (outside a string) normally starts a comment, +;; but it doesn't in the sequence "$#"! +;; +;; To try and address points 2 3 and 5 I used a feature that cperl mode +;; uses, that of a text's syntax property. This, however, has 2 +;; disadvantages: +;; 1. We need to scan the buffer to find which ")" symbols belong to a +;; case alternative, to find any here documents, and handle "$#". +;; 2. Setting the text property makes the buffer modified. If the +;; buffer is read-only buffer we have to cheat and bypass the read-only +;; status. This is for cases where the buffer started read-only buffer +;; but the user issued `toggle-read-only'. +;; +;; Bugs +;; ---- +;; - Indenting many lines is slow. It currently does each line +;; independently, rather than saving state information. +;; +;; - `sh-learn-buffer-indent' is extremely slow. +;; +;; Richard Sharman <rsharman(a)pobox.com> June 1999. + ;;; Code: ;; page 1: variables and settings -;; page 2: mode-command and utility functions -;; page 3: statement syntax-commands for various shells -;; page 4: various other commands - +;; page 2: indentation stuff +;; page 3: mode-command and utility functions +;; page 4: statement syntax-commands for various shells +;; page 5: various other commands + +(eval-when-compile + (require 'skeleton) + (require 'comint)) (require 'executable) -(require 'skeleton) -(defcustom sh-mode-hook nil - "*Hook run by `sh-mode'." -:type 'hook -:group 'sh) -(defcustom sh-set-shell-hook nil - "*Hook run by `sh-set-shell'." -:type 'hook -:group 'sh) (defgroup sh nil "Shell programming utilities" ＠＠ -123,7 +265,6 ＠＠ (itcsh . tcsh) (jcsh . csh) (jsh . sh) - (cmd . sh) (ksh . ksh88) (ksh88 . jsh) (oash . sh) ＠＠ -148,7 +289,6 ＠＠ ash ? Shell jsh Bourne Shell with Job Control bash GNU Bourne Again Shell - bash2 GNU Bourne Again Shell v2.* ksh88 Korn Shell '88 ksh Korn Shell '93 dtksh CDE Desktop Korn Shell ＠＠ -163,7 +303,7 ＠＠ (defcustom sh-alias-alist - ;; XEmacs: Linux is spelled `linux' + ;; XEmacs change: Linux is spelled `linux' (nconc (if (eq system-type 'linux) '((csh . tcsh) (ksh . pdksh))) ＠＠ -226,18 +366,18 ＠＠ :group 'sh-script) (defcustom sh-imenu-generic-expression - (list - (cons 'sh - (concat - "\$^\\s-*function\\s-+[A-Za-z_][A-Za-z_0-9]*\$" - "\\|" - "\$^\\s-*[A-Za-z_][A-Za-z_0-9]*\\s-*()\$"))) - "*Regular expression for recognizing shell function definitions. -See `sh-feature'." -:type '(repeat (cons (symbol :tag "Shell") - regexp)) + `((sh + . ((nil "^\\s-*\$function\\s-+\$?\$[A-Za-z_][A-Za-z_0-9]+\$\\s-*()" 2)))) + "*Alist of regular expressions for recognizing shell function definitions. +See `sh-feature' and `imenu-generic-expression'." +:type '(alist :key-type (symbol :tag "Shell") + :value-type (alist :key-type (choice :tag "Title" + string + (const :tag "None" nil)) + :value-type + (repeat :tag "Regexp, index..." sexp))) :group 'sh-script -:version "20.3") +:version "20.4") (defvar sh-shell-variables nil "Alist of shell variable names that should be included in completion. ＠＠ -257,9 +397,7 ＠＠ (or (cdr (assq shell sh-alias-alist)) shell)) -(defvar sh-shell (sh-canonicalize-shell - (file-name-sans-extension - (file-name-nondirectory sh-shell-file))) +(defvar sh-shell (sh-canonicalize-shell (file-name-nondirectory sh-shell-file)) "The shell being programmed. This is set by \\[sh-set-shell].") ;;; I turned off this feature because it doesn't permit typing commands ＠＠ -300,26 +438,24 ＠＠ -(defvar sh-mode-syntax-table - '((sh eval sh-mode-syntax-table () - ?\# "<" - ?\^l ">#" - ?\n ">#" - ?\" "\"\"" - ?\' "\"'" - ?\` "\"`" - ?! "_" - ?% "_" - ?: "_" - ?. "_" - ?^ "_" - ?~ "_") - (csh eval identity sh) - (rc eval identity sh)) - "Syntax-table used in Shell-Script mode. See `sh-feature'.") +(easy-mmode-defsyntax sh-mode-syntax-table + '((?\# . "<") + (?\^l . ">#") + (?\n . ">#") + (?\" . "\"\"") + (?\' . "\"'") + (?\` . "\"`") + (?! . "_") + (?% . "_") + (?: . "_") + (?. . "_") + (?^ . "_") + (?~ . "_") + (?< . ".") + (?> . ".")) + "Syntax-table used in Shell-Script mode.") - (defvar sh-mode-map (let ((map (make-sparse-keymap)) (menu-map (make-sparse-keymap "Insert"))) ＠＠ -334,6 +470,10 ＠＠ (define-key map "\C-c\C-i" 'sh-if) (define-key map "\C-c\C-f" 'sh-for) (define-key map "\C-c\C-c" 'sh-case) + (define-key map "\C-c?" 'sh-show-indent) + (define-key map "\C-c=" 'sh-set-indent) + (define-key map "\C-c<" 'sh-learn-line-indent) + (define-key map "\C-c>" 'sh-learn-buffer-indent) (define-key map "=" 'sh-assignment) (define-key map "\C-c+" 'sh-add) ＠＠ -347,15 +487,14 ＠＠ (define-key map "`" 'skeleton-pair-insert-maybe) (define-key map "\"" 'skeleton-pair-insert-maybe) - (define-key map "\t" 'sh-indent-line) (substitute-key-definition 'complete-tag 'comint-dynamic-complete map (current-global-map)) (substitute-key-definition 'newline-and-indent 'sh-newline-and-indent map (current-global-map)) -;; GDF - Don't mess around with the DEL bindings -; (substitute-key-definition 'delete-backward-char -; 'backward-delete-char-untabify -; map (current-global-map)) +;; XEmacs changes: Don't mess around with the DEL bindings +; (substitute-key-definition 'delete-backward-char +; 'backward-delete-char-untabify +; map (current-global-map)) (define-key map "\C-c:" 'sh-set-shell) (substitute-key-definition 'beginning-of-defun 'sh-beginning-of-compound-command ＠＠ -364,23 +503,23 ＠＠ map (current-global-map)) (substitute-key-definition 'forward-sentence 'sh-end-of-command map (current-global-map)) - (define-key map [menu-bar insert] (cons "Insert" menu-map)) - (define-key menu-map [sh-while] '("While Loop" . sh-while)) - (define-key menu-map [sh-until] '("Until Loop" . sh-until)) - (define-key menu-map [sh-tmp-file] '("Temporary File" . sh-tmp-file)) - (define-key menu-map [sh-select] '("Select Statement" . sh-select)) - (define-key menu-map [sh-repeat] '("Repeat Loop" . sh-repeat)) - (define-key menu-map [sh-while-getopts] - '("Options Loop" . sh-while-getopts)) - (define-key menu-map [sh-indexed-loop] - '("Indexed Loop" . sh-indexed-loop)) - (define-key menu-map [sh-if] '("If Statement" . sh-if)) - (define-key menu-map [sh-for] '("For Loop" . sh-for)) - (define-key menu-map [sh-case] '("Case Statement" . sh-case)) map) "Keymap used in Shell-Script mode.") - +;; XEmacs changes +(easy-menu-define + sh-mode-menu sh-mode-map "Menu for sh-script mode" + '("Insert" + ["While Loop" sh-while t] + ["Until Loop" sh-until t] + ["Temporary File" sh-tmp-file t] + ["Select Statement" sh-select t] + ["Repeat Loop" sh-repeat t] + ["Options Loop" sh-while-getopts t] + ["Indexed Loop" sh-indexed-loop t] + ["If Statement" sh-if t] + ["For Loop" sh-for t] + ["Case Statement" sh-case t])) (defcustom sh-dynamic-complete-functions '(shell-dynamic-complete-environment-variable ＠＠ -436,7 +575,7 ＠＠ (defvar sh-header-marker nil - "When non-`nil' is the end of header for prepending by \\[sh-execute-region]. + "When non-nil is the end of header for prepending by \\[sh-execute-region]. That command is also used for setting this variable.") ＠＠ -461,8 +600,8 ＠＠ "Word to delimit here documents.") (defvar sh-test - '((sh "[ ]" . 2) - (ksh88 "[[ ]]" . 3)) + '((sh "[ ]" . 3) + (ksh88 "[[ ]]" . 4)) "Initial input in Bourne if, while and until skeletons. See `sh-feature'.") ＠＠ -492,7 +631,7 ＠＠ "bg" "fg" "jobs" "kill" "stop" "suspend") (jcsh eval sh-append csh - "bg" "fg" "jobs" "kill" "notify" "stop" "suspend") + "bg" "fg" "jobs" "kill" "notify" "stop" "suspend") (ksh88 eval sh-append bourne "alias" "bg" "false" "fc" "fg" "jobs" "kill" "let" "print" "time" ＠＠ -622,7 +761,7 ＠＠ "pid" "prompt" "signals") (jcsh eval sh-append csh - "notify") + "notify") (ksh88 eval sh-append sh "ENV" "ERRNO" "FCEDIT" "FPATH" "HISTFILE" "HISTSIZE" "LINENO" ＠＠ -667,6 +806,21 ＠＠ "List of all shell variables available for completing read. See `sh-feature'.") + +;;; Font-Lock support + +(defface sh-heredoc-face + '((((class color) + (background dark)) + (:foreground "yellow" :bold t)) + (((class color) + (background light)) + (:foreground "tan" )) + (t + (:bold t))) + "Face to show a here-document" +:group 'sh-indentation) +(defvar sh-heredoc-face 'sh-heredoc-face) (defvar sh-font-lock-keywords ＠＠ -707,16 +861,371 ＠＠ (defvar sh-font-lock-keywords-2 () "Gaudy level highlighting for Shell Script modes.") +;; These are used for the syntax table stuff (derived from cperl-mode). +;; Note: parse-sexp-lookup-properties must be set to t for it to work. + +;; XEmacs changes: syntax-string-to-code replaces string-to-syntax +(defconst sh-st-punc (syntax-string-to-code ".")) +(defconst sh-st-symbol (syntax-string-to-code "_")) +(defconst sh-here-doc-syntax (syntax-string-to-code "|")) ;; generic string + +(defun sh-font-lock-heredoc (start string quoted) + "Determine the syntax of the \\n after a <<HEREDOC." + (unless (sh-in-comment-or-string start) + ;; We're looking at <<STRING, so we add "^STRING$" to the syntactic + ;; font-lock keywords to detect the end of this here document. + (let ((ere (concat + "^" (if quoted "[ \t]*") + (regexp-quote (replace-regexp-in-string "['\"]" "" string)) + "\$\n\$"))) + (unless (assoc ere font-lock-syntactic-keywords) + (let* ( ;; A rough regexp that should find us back. + (sre (concat "<<\$-\$?\\s-*\\\\?['\"]?" + (regexp-quote string) "['\"]?[ \t\n]")) + (code `(cond + ((save-excursion (re-search-backward ,sre nil t)) + ;; This ^STRING$ is indeed following a <<STRING + sh-here-doc-syntax) + ((not (save-excursion (re-search-forward ,sre nil t))) + ;; There's no <<STRING either before or after us, + ;; so we should remove this now obsolete entry. + (setq font-lock-syntactic-keywords + (delq (assoc ,ere font-lock-syntactic-keywords) + font-lock-syntactic-keywords)) + nil)))) + ;; Use destructive update so the new keyword gets used right away. + (setq font-lock-syntactic-keywords + (nconc font-lock-syntactic-keywords + (list (font-lock-compile-keyword `(,ere 1 ,code)))))))) + sh-here-doc-syntax)) + +(defun sh-font-lock-paren (start) + (save-excursion + (goto-char start) + ;; Skip through all patterns + (while + (progn + (forward-comment (- (point-max))) + ;; Skip through one pattern + (while + (or (/= 0 (skip-syntax-backward "w_")) + (/= 0 (skip-chars-backward "?*/")) + (when (memq (char-before) '(?\" ?\')) + (condition-case nil (progn (backward-sexp 1) t) + (error nil))))) + (forward-comment (- (point-max))) + (when (eq (char-before) ?|) + (backward-char 1) t))) + (when (save-excursion (backward-char 2) (looking-at ";;\\|in")) + sh-st-punc))) + (defconst sh-font-lock-syntactic-keywords - ;; Mark a `#' character as having punctuation syntax in a variable reference. - ;; Really we should do this properly. From Chet Ramey and Brian Fox: - ;; "A `#' begins a comment when it is unquoted and at the beginning of a - ;; word. In the shell, words are separated by metacharacters." - ;; To do this in a regexp would be slow as it would be anchored to the right. - ;; But I can't be bothered to write a function to do it properly and - ;; efficiently. So we only do it properly for `#' in variable references and - ;; do it efficiently by anchoring the regexp to the left. - '(("\\${?[^}#\n\t ]*\$##?\$" 1 (1 . nil)))) + ;; A `#' begins a comment when it is unquoted and at the beginning of a + ;; word. In the shell, words are separated by metacharacters. + ;; The list of special chars is taken from the single-unix spec + ;; of the shell command language (under `quoting') but with `$' removed. + `(("[^|&;<>()`\\\"' \t\n]\$#+\$" 1 ,sh-st-symbol) + ;; Find HEREDOC starters and add a corresponding rule for the ender. + ("[^<>]<<\$-\$?\\s-*\\\\?\$\\(['\"][^'\"]+['\"]\\|\\sw\\|\\s_\$+\\).*\$\n\$" + 4 (sh-font-lock-heredoc + (match-beginning 0) (match-string 2) (match-end 1))) + ;; Distinguish the special close-paren in `case'. + (")" 0 (sh-font-lock-paren (match-beginning 0))))) + +(defun sh-font-lock-syntactic-face-function (state) + (if (nth 3 state) + (if (char-valid-p (nth 3 state)) + font-lock-string-face + sh-heredoc-face) + font-lock-comment-face)) + +(defgroup sh-indentation nil + "Variables controlling indentation in shell scripts. + +Note: customizing these variables will not affect existing buffers if +`sh-make-vars-local' is no-nil. See the documentation for +variable `sh-make-vars-local', command `sh-make-vars-local' +and command `sh-reset-indent-vars-to-global-values'." +:group 'sh-script) + + +(defcustom sh-set-shell-hook nil + "*Hook run by `sh-set-shell'." +:type 'hook +:group 'sh-script) + +(defcustom sh-mode-hook nil + "*Hook run by `sh-mode'." +:type 'hook +:group 'sh-script) + +(defcustom sh-learn-basic-offset nil + "*When `sh-guess-basic-offset' should learn `sh-basic-offset'. + +nil mean: never. +t means: only if there seems to be an obvious value. +Anything else means: whenever we have a \"good guess\" as to the value." +:type '(choice + (const :tag "Never" nil) + (const :tag "Only if sure" t) + (const :tag "If have a good guess" usually)) +:group 'sh-indentation) + +(defcustom sh-popup-occur-buffer nil + "*Controls when `sh-learn-buffer-indent' pops the *indent* buffer. +If t it is always shown. If nil, it is shown only when there +are conflicts." +:type '(choice + (const :tag "Only when there are conflicts." nil) + (const :tag "Always" t)) +:group 'sh-indentation) + +(defcustom sh-blink t + "*If non-nil, `sh-show-indent' shows the line indentation is relative to. +The position on the line is not necessarily meaningful. +In some cases the line will be the matching keyword, but this is not +always the case." +:type 'boolean +:group 'sh-indentation) + +(defcustom sh-first-lines-indent 0 + "*The indentation of the first non-blank non-comment line. +Usually 0 meaning first column. +Can be set to a number, or to nil which means leave it as is." +:type '(choice + (const :tag "Leave as is" nil) + (integer :tag "Column number" + :menu-tag "Indent to this col (0 means first col)" )) +:group 'sh-indentation) + + +(defcustom sh-basic-offset 4 + "*The default indentation increment. +This value is used for the + and - symbols in an indentation variable." +:type 'integer +:group 'sh-indentation) + +(defcustom sh-indent-comment nil + "*How a comment line is to be indented. +nil means leave it as it is; +t means indent it as a normal line, aligning it to previous non-blank + non-comment line; +a number means align to that column, e.g. 0 means fist column." +:type '(choice + (const :tag "Leave as is." nil) + (const :tag "Indent as a normal line." t) + (integer :menu-tag "Indent to this col (0 means first col)." + :tag "Indent to column number.") ) +:group 'sh-indentation) + + +(defvar sh-debug nil + "Enable lots of debug messages - if function `sh-debug' is enabled.") + + +;; Uncomment this defun and comment the defmacro for debugging. +;; (defun sh-debug (&rest args) +;; "For debugging: display message ARGS if variable SH-DEBUG is non-nil." +;; (if sh-debug +;; (apply 'message args))) +(defmacro sh-debug (&rest args)) + +(defconst sh-symbol-list + '((const :tag "+ " :value + + :menu-tag "+ Indent right by sh-basic-offset") + (const :tag "- " :value - + :menu-tag "- Indent left by sh-basic-offset") + (const :tag "++" :value ++ + :menu-tag "++ Indent right twice sh-basic-offset") + (const :tag "--" :value -- + :menu-tag "-- Indent left twice sh-basic-offset") + (const :tag "* " :value * + :menu-tag "* Indent right half sh-basic-offset") + (const :tag "/ " :value / + :menu-tag "/ Indent left half sh-basic-offset"))) + +(defcustom sh-indent-for-else 0 + "*How much to indent an else relative to an if. Usually 0." +:type `(choice + (integer :menu-tag "A number (positive=>indent right)" + :tag "A number") + (const :tag "--") ;; separator! + ,＠ sh-symbol-list + ) +:group 'sh-indentation) + +(defconst sh-number-or-symbol-list + (append '((integer :menu-tag "A number (positive=>indent right)" + :tag "A number") + (const :tag "--")) ; separator + sh-symbol-list)) + +(defcustom sh-indent-for-fi 0 + "*How much to indent a fi relative to an if. Usually 0." +:type `(choice ,＠ sh-number-or-symbol-list ) +:group 'sh-indentation) + +(defcustom sh-indent-for-done '0 + "*How much to indent a done relative to its matching stmt. Usually 0." +:type `(choice ,＠ sh-number-or-symbol-list ) +:group 'sh-indentation) + +(defcustom sh-indent-after-else '+ + "*How much to indent a statement after an else statement." +:type `(choice ,＠ sh-number-or-symbol-list ) +:group 'sh-indentation) + +(defcustom sh-indent-after-if '+ + "*How much to indent a statement after an if statement. +This includes lines after else and elif statements, too, but +does not affect then else elif or fi statements themselves." +:type `(choice ,＠ sh-number-or-symbol-list ) +:group 'sh-indentation) + +(defcustom sh-indent-for-then '+ + "*How much to indent a then relative to an if." +:type `(choice ,＠ sh-number-or-symbol-list ) +:group 'sh-indentation) + +(defcustom sh-indent-for-do '* + "*How much to indent a do statement. +This is relative to the statement before the do, i.e. the +while until or for statement." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +(defcustom sh-indent-after-do '* + "*How much to indent a line after a do statement. +This is used when the do is the first word of the line. +This is relative to the statement before the do, e.g. a +while for repeat or select statement." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +(defcustom sh-indent-after-loop-construct '+ + "*How much to indent a statement after a loop construct. + +This variable is used when the keyword \"do\" is on the same line as the +loop statement (e.g. \"until\", \"while\" or \"for\"). +If the do is on a line by itself, then `sh-indent-after-do' is used instead." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + + +(defcustom sh-indent-after-done 0 + "*How much to indent a statement after a \"done\" keyword. +Normally this is 0, which aligns the \"done\" to the matching +looping construct line. +Setting it non-zero allows you to have the \"do\" statement on a line +by itself and align the done under to do." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +(defcustom sh-indent-for-case-label '+ + "*How much to indent a case label statement. +This is relative to the line containing the case statement." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +(defcustom sh-indent-for-case-alt '++ + "*How much to indent statements after the case label. +This is relative to the line containing the case statement." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + + +(defcustom sh-indent-for-continuation '+ + "*How much to indent for a continuation statement." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +(defcustom sh-indent-after-open '+ + "*How much to indent after a line with an opening parenthesis or brace. +For an open paren after a function `sh-indent-after-function' is used." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +(defcustom sh-indent-after-function '+ + "*How much to indent after a function line." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +;; These 2 are for the rc shell: + +(defcustom sh-indent-after-switch '+ + "*How much to indent a case statement relative to the switch statement. +This is for the rc shell." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +(defcustom sh-indent-after-case '+ + "*How much to indent a statement relative to the case statement. +This is for the rc shell." +:type `(choice ,＠ sh-number-or-symbol-list) +:group 'sh-indentation) + +;; Internal use - not designed to be changed by the user: + +(defun sh-mkword-regexpr (word) + "Make a regexp which matches WORD as a word. +This specifically excludes an occurrence of WORD followed by +punctuation characters like '-'." + (concat word "\$[^-a-z0-9_]\\|$\$")) + +(defconst sh-re-done (sh-mkword-regexpr "done")) + + +(defconst sh-kws-for-done + '((sh . ( "while" "until" "for" ) ) + (bash . ( "while" "until" "for" "select" ) ) + (ksh88 . ( "while" "until" "for" "select" ) ) + (zsh . ( "while" "until" "for" "repeat" "select" ) ) ) + "Which keywords can match the word `done' in this shell.") + + +(defconst sh-indent-supported + '((sh . t) + (csh . nil) + (rc . t)) + "Shell types that shell indenting can do something with.") + +(defvar sh-indent-supported-here nil + "Non-nil if we support indentation for the current buffer's shell type.") + +(defconst sh-electric-rparen-needed + '((sh . t)) + "Non-nil if the shell type needs an electric handling of case alternatives.") + +(defconst sh-var-list + '( + sh-basic-offset sh-first-lines-indent sh-indent-after-case + sh-indent-after-do sh-indent-after-done + sh-indent-after-else + sh-indent-after-if + sh-indent-after-loop-construct + sh-indent-after-open + sh-indent-comment + sh-indent-for-case-alt + sh-indent-for-case-label + sh-indent-for-continuation + sh-indent-for-do + sh-indent-for-done + sh-indent-for-else + sh-indent-for-fi + sh-indent-for-then + ) + "A list of variables used by script mode to control indentation. +This list is used when switching between buffer-local and global +values of variables, and for the commands using indentation styles.") + +(defvar sh-make-vars-local t + "*Controls whether indentation variables are local to the buffer. +If non-nil, indentation variables are made local initially. +If nil, you can later make the variables local by invoking +command `sh-make-vars-local'. +The default is t because I assume that in one Emacs session one is +frequently editing existing scripts with different styles.") + ;; mode-command and utility functions ＠＠ -724,7 +1233,7 ＠＠ (put 'sh-mode 'mode-class 'special) ;;;###autoload -(defun sh-mode () +(define-derived-mode sh-mode nil "Shell-script" "Major mode for editing shell scripts. This mode works for many shells, since they all have roughly the same syntax, as far as commands, arguments, variables, pipes, comments etc. are concerned. ＠＠ -751,6 +1260,15 ＠＠ \\[sh-until] until loop \\[sh-while] while loop +For sh and rc shells indentation commands are: +\\[sh-show-indent] Show the variable controlling this line's indentation. +\\[sh-set-indent] Set then variable controlling this line's indentation. +\\[sh-learn-line-indent] Change the indentation variable so this line +would indent to the way it currently is. +\\[sh-learn-buffer-indent] Set the indentation variables so the +buffer indents as it currently is indented. + + \\[backward-delete-char-untabify] Delete backward one position, even if it was a tab. \\[sh-newline-and-indent] Delete unquoted space and indent new line same as this one. \\[sh-end-of-command] Go to end of successive commands. ＠＠ -768,11 +1286,6 ＠＠ If your shell gives error messages with line numbers, you can use \\[executable-interpret] with your script for an edit-interpret-debug cycle." - (interactive) - (kill-all-local-variables) - (use-local-map sh-mode-map) - (make-local-variable 'indent-line-function) - (make-local-variable 'indent-region-function) (make-local-variable 'skeleton-end-hook) (make-local-variable 'paragraph-start) (make-local-variable 'paragraph-separate) ＠＠ -792,19 +1305,8 ＠＠ (make-local-variable 'sh-shell-variables) (make-local-variable 'sh-shell-variables-initialized) (make-local-variable 'imenu-generic-expression) - (setq major-mode 'sh-mode - mode-name "Shell-script" - indent-line-function 'sh-indent-line - ;; not very clever, but enables wrapping skeletons around regions - indent-region-function (lambda (b e) - (save-excursion - (goto-char b) - (skip-syntax-backward "-") - (setq b (point)) - (goto-char e) - (skip-syntax-backward "-") - (indent-rigidly b (point) sh-indentation))) - skeleton-end-hook (lambda () + (make-local-variable 'sh-indent-supported-here) + (setq skeleton-end-hook (lambda () (or (eolp) (newline) (indent-relative))) paragraph-start (concat page-delimiter "\\|$") paragraph-separate paragraph-start ＠＠ -813,19 +1315,23 ＠＠ ;; we can't look if previous line ended with `\' comint-prompt-regexp "^[ \t]*" font-lock-defaults - '((sh-font-lock-keywords + `((sh-font-lock-keywords sh-font-lock-keywords-1 sh-font-lock-keywords-2) nil nil ((?/ . "w") (?~ . "w") (?. . "w") (?- . "w") (?_ . "w")) nil - (font-lock-syntactic-keywords . sh-font-lock-syntactic-keywords)) + (font-lock-syntactic-keywords + ;; Copy so we can use destructive update in `sh-font-lock-heredoc'. + . ,(copy-sequence sh-font-lock-syntactic-keywords)) + (font-lock-syntactic-face-function + . sh-font-lock-syntactic-face-function)) skeleton-pair-alist '((?` _ ?`)) skeleton-pair-filter 'sh-quoted-p skeleton-further-elements '((< '(- (min sh-indentation (current-column))))) skeleton-filter 'sh-feature - skeleton-newline-indent-rigidly t) - (make-local-variable 'parse-sexp-ignore-comments) - (setq parse-sexp-ignore-comments t) + skeleton-newline-indent-rigidly t + sh-indent-supported-here nil) + (set (make-local-variable 'parse-sexp-ignore-comments) t) ;; Parse or insert magic number for exec, and set all variables depending ;; on the shell thus determined. (let ((interpreter ＠＠ -836,16 +1342,11 ＠＠ ((and buffer-file-name (string-match "\\.m?spec$" buffer-file-name)) "rpm"))))) - (if interpreter - (sh-set-shell interpreter nil nil) - (progn - ;; If we don't know the shell for this file, set the syntax - ;; table anyway, for the user's normal choice of shell. - (set-syntax-table (or (sh-feature sh-mode-syntax-table) - (standard-syntax-table))) - ;; And avoid indent-new-comment-line (at least) losing. - (setq comment-start-skip "#+[\t ]*")))) - (run-hooks 'sh-mode-hook)) + (sh-set-shell (or interpreter sh-shell-file) nil nil)) + ;; XEmacs + (if sh-mode-menu + (easy-menu-add sh-mode-menu))) + ;;;###autoload (defalias 'shell-script-mode 'sh-mode) ＠＠ -888,7 +1389,7 ＠＠ (mapconcat 'identity (sh-feature sh-builtins) "\\|") "\\)\\>") (2 font-lock-keyword-face nil t) - (6 font-lock-function-name-face)) + (6 font-lock-builtin-face)) ,＠(sh-feature sh-font-lock-keywords-2))) (,(concat keywords "\\)\\>") 2 font-lock-keyword-face) ＠＠ -899,6 +1400,61 ＠＠ (sh-font-lock-keywords-1 t)) +(defvar sh-regexp-for-done nil + "A buffer-local regexp to match opening keyword for done.") + +(defvar sh-kw-alist nil + "A buffer-local, since it is shell-type dependent, list of keywords.") + +;; ( key-word first-on-this on-prev-line ) +;; This is used to set `sh-kw-alist' which is a list of sublists each +;; having 3 elements: +;; a keyword +;; a rule to check when the keyword appears on "this" line +;; a rule to check when the keyword appears on "the previous" line +;; The keyword is usually a string and is the first word on a line. +;; If this keyword appears on the line whose indentation is to be +;; calculated, the rule in element 2 is called. If this returns +;; non-zero, the resulting point (which may be changed by the rule) +;; is used as the default indentation. +;; If it returned false or the keyword was not found in the table, +;; then the keyword from the previous line is looked up and the rule +;; in element 3 is called. In this case, however, +;; `sh-get-indent-info' does not stop but may keep going and test +;; other keywords against rules in element 3. This is because the +;; preceding line could have, for example, an opening "if" and an +;; opening "while" keyword and we need to add the indentation offsets +;; for both. +;; +(defconst sh-kw + '((sh + ("if" nil sh-handle-prev-if) + ("elif" sh-handle-this-else sh-handle-prev-else) + ("else" sh-handle-this-else sh-handle-prev-else) + ("fi" sh-handle-this-fi sh-handle-prev-fi) + ("then" sh-handle-this-then sh-handle-prev-then) + ("(" nil sh-handle-prev-open) + ("{" nil sh-handle-prev-open) + ("[" nil sh-handle-prev-open) + ("}" sh-handle-this-close nil) + (")" sh-handle-this-close nil) + ("]" sh-handle-this-close nil) + ("case" nil sh-handle-prev-case) + ("esac" sh-handle-this-esac sh-handle-prev-esac) + (case-label nil sh-handle-after-case-label) ;; ??? + (";;" nil sh-handle-prev-case-alt-end) ;; ??? + ("done" sh-handle-this-done sh-handle-prev-done) + ("do" sh-handle-this-do sh-handle-prev-do)) + + ;; Note: we don't need specific stuff for bash and zsh shells; + ;; the regexp `sh-regexp-for-done' handles the extra keywords + ;; these shells use. + (rc + ("{" nil sh-handle-prev-open) + ("}" sh-handle-this-close nil) + ("case" sh-handle-this-rc-case sh-handle-prev-rc-case)))) + + (defun sh-set-shell (shell &optional no-query-flag insert-flag) "Set this buffer's shell to SHELL (a string). Makes this script executable via `executable-set-magic', and sets up the ＠＠ -921,26 +1477,33 ＠＠ no-query-flag insert-flag))) (setq require-final-newline (sh-feature sh-require-final-newline) ;;; local-abbrev-table (sh-feature sh-abbrevs) - font-lock-defaults-computed nil -;; Packages should not need to set these variables directly. sm. -; font-lock-keywords nil ; force resetting -; font-lock-syntax-table nil comment-start-skip "#+[\t ]*" mode-line-process (format "[%s]" sh-shell) sh-shell-variables nil sh-shell-variables-initialized nil imenu-generic-expression (sh-feature sh-imenu-generic-expression) imenu-case-fold-search nil) - (set-syntax-table (or (sh-feature sh-mode-syntax-table) - (standard-syntax-table))) - (let ((vars (sh-feature sh-variables))) - (while vars - (sh-remember-variable (car vars)) - (setq vars (cdr vars)))) -;; Packages should not need to toggle Font Lock mode. sm. -; (and (boundp 'font-lock-mode) -; font-lock-mode -; (font-lock-mode (font-lock-mode 0))) + (dolist (var (sh-feature sh-variables)) + (sh-remember-variable var)) + (make-local-variable 'indent-line-function) + (if (setq sh-indent-supported-here (sh-feature sh-indent-supported)) + (progn + (message "Setting up indent for shell type %s" sh-shell) + (set (make-local-variable 'parse-sexp-lookup-properties) t) + (set (make-local-variable 'sh-kw-alist) (sh-feature sh-kw)) + (let ((regexp (sh-feature sh-kws-for-done))) + (if regexp + (set (make-local-variable 'sh-regexp-for-done) + (sh-mkword-regexpr (regexp-opt regexp t))))) + (message "setting up indent stuff") + ;; sh-mode has already made indent-line-function local + ;; but do it in case this is called before that. + (setq indent-line-function 'sh-indent-line) + (if sh-make-vars-local + (sh-make-vars-local)) + (message "Indentation setup for shell type %s" sh-shell)) + (message "No indentation for this shell type.") + (setq indent-line-function 'sh-basic-indent-line)) (run-hooks 'sh-set-shell-hook)) ＠＠ -1034,15 +1597,6 ＠＠ ;;; (symbol-value sh-shell))) -(defun sh-mode-syntax-table (table &rest list) - "Copy TABLE and set syntax for successive CHARs according to strings S." - (setq table (copy-syntax-table table)) - (while list - (modify-syntax-entry (car list) (car (cdr list)) table) - (setq list (cdr (cdr list)))) - table) - - (defun sh-append (ancestor &rest list) "Return list composed of first argument (a list) physically appended to rest." (nconc list ancestor)) ＠＠ -1059,7 +1613,7 ＠＠ skeleton) -(defun sh-indent-line () +(defun sh-basic-indent-line () "Indent a line for Sh mode (shell script mode). Indent as far as preceding non-empty line, then by steps of `sh-indentation'. Lines containing only comments are considered empty." ＠＠ -1067,7 +1621,6 ＠＠ (let ((previous (save-excursion (while (and (progn (beginning-of-line) (not (bobp))) - (not (eq (point-min) (point-at-bol))) (progn (forward-line -1) (back-to-indentation) ＠＠ -1122,7 +1675,7 ＠＠ (or (< (length var) sh-remember-variable-min) (getenv var) (assoc var sh-shell-variables) - (setq sh-shell-variables (cons (cons var var) sh-shell-variables))) + (push (cons var var) sh-shell-variables)) var) ＠＠ -1131,6 +1684,1421 ＠＠ "Is point preceded by an odd number of backslashes?" (eq -1 (% (save-excursion (skip-chars-backward "\\\\")) 2))) +;; Indentation stuff. +(defun sh-must-be-shell-mode () + "Signal an error if not in Shell-script mode." + (unless (eq major-mode 'sh-mode) + (error "This buffer is not in Shell-script mode"))) + +(defun sh-must-support-indent () + "*Signal an error if the shell type for this buffer is not supported. +Also, the buffer must be in Shell-script mode." + (sh-must-be-shell-mode) + (unless sh-indent-supported-here + (error "This buffer's shell type is not supported for this command"))) + +(defun sh-make-vars-local () + "Make the indentation variables local to this buffer. +Normally they already are local. This command is provided in case +variable `sh-make-vars-local' has been set to nil. + +To revert all these variables to the global values, use +command `sh-reset-indent-vars-to-global-values'." + (interactive) + (sh-must-be-shell-mode) + (mapcar 'make-local-variable sh-var-list) + (message "Indentation variable are now local.")) + +(defun sh-reset-indent-vars-to-global-values () + "Reset local indentation variables to the global values. +Then, if variable `sh-make-vars-local' is non-nil, make them local." + (interactive) + (sh-must-be-shell-mode) + (mapcar 'kill-local-variable sh-var-list) + (if sh-make-vars-local + (mapcar 'make-local-variable sh-var-list))) + + +;; Theoretically these are only needed in shell and derived modes. +;; However, the routines which use them are only called in those modes. +(defconst sh-special-keywords "then\\|do") + +(defun sh-help-string-for-variable (var) + "Construct a string for `sh-read-variable' when changing variable VAR ." + (let ((msg (documentation-property var 'variable-documentation)) + (msg2 "")) + (unless (memq var '(sh-first-lines-indent sh-indent-comment)) + (setq msg2 + (format "\n +You can enter a number (positive to increase indentation, +negative to decrease indentation, zero for no change to indentation). + +Or, you can enter one of the following symbols which are relative to +the value of variable `sh-basic-offset' +which in this buffer is currently %s. + +\t%s." + sh-basic-offset + (mapconcat (lambda (x) + (nth (1- (length x)) x)) + sh-symbol-list "\n\t")))) + (concat + ;; The following shows the global not the local value! + ;; (format "Current value of %s is %s\n\n" var (symbol-value var)) + msg msg2))) + +(defun sh-read-variable (var) + "Read a new value for indentation variable VAR." + (interactive "*variable? ") ;; to test + (let ((minibuffer-help-form `(sh-help-string-for-variable + (quote ,var))) + val) + (setq val (read-from-minibuffer + (format "New value for %s (press %s for help): " + var (single-key-description help-char)) + (format "%s" (symbol-value var)) + nil t)) + val)) + + + +(defun sh-in-comment-or-string (start) + "Return non-nil if START is in a comment or string." + (save-excursion + (let (state) + (beginning-of-line) + (setq state (parse-partial-sexp (point) start nil nil nil t)) + (or (nth 3 state)(nth 4 state))))) + +(defun sh-goto-matching-if () + "Go to the matching if for a fi. +This handles nested if..fi pairs." + (let ((found (sh-find-prev-matching "\\bif\\b" "\\bfi\\b" 1))) + (if found + (goto-char found)))) + + +;; Functions named sh-handle-this-XXX are called when the keyword on the +;; line whose indentation is being handled contain XXX; +;; those named sh-handle-prev-XXX are when XXX appears on the previous line. + +(defun sh-handle-prev-if () + (list '(+ sh-indent-after-if))) + +(defun sh-handle-this-else () + (if (sh-goto-matching-if) + ;; (list "aligned to if") + (list "aligned to if" '(+ sh-indent-for-else)) + nil + )) + +(defun sh-handle-prev-else () + (if (sh-goto-matching-if) + (list '(+ sh-indent-after-if)) + )) + +(defun sh-handle-this-fi () + (if (sh-goto-matching-if) + (list "aligned to if" '(+ sh-indent-for-fi)) + nil + )) + +(defun sh-handle-prev-fi () + ;; Why do we have this rule? Because we must go back to the if + ;; to get its indent. We may continue back from there. + ;; We return nil because we don't have anything to add to result, + ;; the side affect of setting align-point is all that matters. + ;; we could return a comment (a string) but I can't think of a good one... + (sh-goto-matching-if) + nil) + +(defun sh-handle-this-then () + (let ((p (sh-goto-matching-if))) + (if p + (list '(+ sh-indent-for-then)) + ))) + +(defun sh-handle-prev-then () + (let ((p (sh-goto-matching-if))) + (if p + (list '(+ sh-indent-after-if)) + ))) + +(defun sh-handle-prev-open () + (save-excursion + (let ((x (sh-prev-stmt))) + (if (and x + (progn + (goto-char x) + (or + (looking-at "function\\b") + (looking-at "\\s-*\\S-+\\s-*()") + ))) + (list '(+ sh-indent-after-function)) + (list '(+ sh-indent-after-open))) + ))) + +(defun sh-handle-this-close () + (forward-char 1) ;; move over ")" + (if (sh-safe-forward-sexp -1) + (list "aligned to opening paren"))) + +(defun sh-goto-matching-case () + (let ((found (sh-find-prev-matching "\\bcase\\b" "\\besac\\b" 1))) + (if found (goto-char found)))) + +(defun sh-handle-prev-case () + ;; This is typically called when point is on same line as a case + ;; we shouldn't -- and can't find prev-case + (if (looking-at ".*\\<case\\>") + (list '(+ sh-indent-for-case-label)) + (error "We don't seem to be on a line with a case"))) ;; debug + +(defun sh-handle-this-esac () + (if (sh-goto-matching-case) + (list "aligned to matching case"))) + +(defun sh-handle-prev-esac () + (if (sh-goto-matching-case) + (list "matching case"))) + +(defun sh-handle-after-case-label () + (if (sh-goto-matching-case) + (list '(+ sh-indent-for-case-alt)))) + +(defun sh-handle-prev-case-alt-end () + (if (sh-goto-matching-case) + (list '(+ sh-indent-for-case-label)))) + +(defun sh-safe-forward-sexp (&optional arg) + "Try and do a `forward-sexp', but do not error. +Return new point if successful, nil if an error occurred." + (condition-case nil + (progn + (forward-sexp (or arg 1)) + (point)) ;; return point if successful + (error + (sh-debug "oops!(1) %d" (point)) + nil))) ;; return nil if fail + +(defun sh-goto-match-for-done () + (let ((found (sh-find-prev-matching sh-regexp-for-done sh-re-done 1))) + (if found + (goto-char found)))) + +(defun sh-handle-this-done () + (if (sh-goto-match-for-done) + (list "aligned to do stmt" '(+ sh-indent-for-done)))) + +(defun sh-handle-prev-done () + (if (sh-goto-match-for-done) + (list "previous done"))) + +(defun sh-handle-this-do () + (if (sh-goto-match-for-done) + (list '(+ sh-indent-for-do)))) + +(defun sh-handle-prev-do () + (cond + ((save-restriction + (narrow-to-region + (point) + (save-excursion + (beginning-of-line) + (point))) + (sh-goto-match-for-done)) + (sh-debug "match for done found on THIS line") + (list '(+ sh-indent-after-loop-construct))) + ((sh-goto-match-for-done) + (sh-debug "match for done found on PREV line") + (list '(+ sh-indent-after-do))) + (t + (message "match for done NOT found") + nil))) + +;; for rc: +(defun sh-find-prev-switch () + "Find the line for the switch keyword matching this line's case keyword." + (re-search-backward "\\<switch\\>" nil t)) + +(defun sh-handle-this-rc-case () + (if (sh-find-prev-switch) + (list '(+ sh-indent-after-switch)) + ;; (list '(+ sh-indent-for-case-label)) + nil)) + +(defun sh-handle-prev-rc-case () + (list '(+ sh-indent-after-case))) + +(defun sh-check-rule (n thing) + (let ((rule (nth n (assoc thing sh-kw-alist))) + (val nil)) + (if rule + (progn + (setq val (funcall rule)) + (sh-debug "rule (%d) for %s at %d is %s\n-> returned %s" + n thing (point) rule val))) + val)) + + +(defun sh-get-indent-info () + "Return indent-info for this line. +This is a list. nil means the line is to be left as is. +Otherwise it contains one or more of the following sublists: +$t NUMBER$ NUMBER is the base location in the buffer that indentation is + relative to. If present, this is always the first of the + sublists. The indentation of the line in question is + derived from the indentation of this point, possibly + modified by subsequent sublists. +$+ VAR$ +$- VAR$ Get the value of variable VAR and add to or subtract from + the indentation calculated so far. +$= VAR$ Get the value of variable VAR and *replace* the + indentation with its value. This only occurs for + special variables such as `sh-indent-comment'. +STRING This is ignored for the purposes of calculating + indentation, it is printed in certain cases to help show + what the indentation is based on." + ;; See comments before `sh-kw'. + (save-excursion + (let ((prev-kw nil) + (prev-stmt nil) + (have-result nil) + depth-bol depth-eol + this-kw + (state nil) + state-bol + (depth-prev-bol nil) + start + func val + (result nil) + prev-lines-indent + (prev-list nil) + (this-list nil) + (align-point nil) + prev-line-end x) + (beginning-of-line) + ;; Note: setting result to t means we are done and will return nil. + ;;(This function never returns just t.) + (cond + ((or (and (boundp 'font-lock-string-face) + (eq (get-text-property (point) 'face) font-lock-string-face)) + (eq (get-text-property (point) 'face) sh-heredoc-face)) + (setq result t) + (setq have-result t)) + ((looking-at "\\s-*#") ; was (equal this-kw "#") + (if (bobp) + (setq result t) ;; return nil if 1st line! + (setq result (list '(= sh-indent-comment))) + ;; we still need to get previous line in case + ;; sh-indent-comment is t (indent as normal) + (setq align-point (sh-prev-line nil)) + (setq have-result nil) + )) + ) ;; cond + + (unless have-result + ;; Continuation lines are handled specially + (if (sh-this-is-a-continuation) + (progn + ;; We assume the line being continued is already + ;; properly indented... + ;; (setq prev-line-end (sh-prev-line)) + (setq align-point (sh-prev-line nil)) + (setq result (list '(+ sh-indent-for-continuation))) + (setq have-result t)) + (beginning-of-line) + (skip-chars-forward " \t") + (setq this-kw (sh-get-kw))) + + ;; Handle "this" keyword: first word on the line we're + ;; calculating indentation info for. + (if this-kw + (if (setq val (sh-check-rule 1 this-kw)) + (progn + (setq align-point (point)) + (sh-debug + "this - setting align-point to %d" align-point) + (setq result (append result val)) + (setq have-result t) + ;; set prev-line to continue processing remainder + ;; of this line as a previous line + (setq prev-line-end (point)) + )))) + + (unless have-result + (setq prev-line-end (sh-prev-line 'end))) + + (if prev-line-end + (save-excursion + ;; We start off at beginning of this line. + ;; Scan previous statements while this is <= + ;; start of previous line. + (setq start (point)) ;; for debug only + (goto-char prev-line-end) + (setq x t) + (while (and x (setq x (sh-prev-thing))) + (sh-debug "at %d x is: %s result is: %s" (point) x result) + (cond + ((and (equal x ")") + (equal (get-text-property (1- (point)) 'syntax-table) + sh-st-punc)) + (sh-debug "Case label) here") + (setq x 'case-label) + (if (setq val (sh-check-rule 2 x)) + (progn + (setq result (append result val)) + (setq align-point (point)))) + (forward-char -1) + (skip-chars-forward "[a-z0-9]*?") + ) + ((string-match "[])}]" x) + (setq x (sh-safe-forward-sexp -1)) + (if x + (progn + (setq align-point (point)) + (setq result (append result + (list "aligned to opening paren"))) + ))) + ((string-match "[[({]" x) + (sh-debug "Checking special thing: %s" x) + (if (setq val (sh-check-rule 2 x)) + (setq result (append result val))) + (forward-char -1) + (setq align-point (point))) + ((string-match "[\"'`]" x) + (sh-debug "Skipping back for %s" x) + ;; this was oops-2 + (setq x (sh-safe-forward-sexp -1))) + ((stringp x) + (sh-debug "Checking string %s at %s" x (point)) + (if (setq val (sh-check-rule 2 x)) + ;; (or (eq t (car val)) + ;; (eq t (car (car val)))) + (setq result (append result val))) + ;; not sure about this test Wed Jan 27 23:48:35 1999 + (setq align-point (point)) + (unless (bolp) + (forward-char -1))) + (t + (error "Don't know what to do with %s" x)) + ) + ) ;; while + (sh-debug "result is %s" result) + ) + (sh-debug "No prev line!") + (sh-debug "result: %s align-point: %s" result align-point) + ) + + (if align-point + ;; was: (setq result (append result (list (list t align-point)))) + (setq result (append (list (list t align-point)) result)) + ) + (sh-debug "result is now: %s" result) + + (or result + (if prev-line-end + (setq result (list (list t prev-line-end))) + (setq result (list (list '= 'sh-first-lines-indent))) + )) + + (if (eq result t) + (setq result nil)) + (sh-debug "result is: %s" result) + result + ) ;; let + )) + + +(defun sh-get-indent-var-for-line (&optional info) + "Return the variable controlling indentation for this line. +If there is not [just] one such variable, return a string +indicating the problem. +If INFO is supplied it is used, else it is calculated." + (let ((var nil) + (result nil) + (reason nil) + sym elt) + (or info + (setq info (sh-get-indent-info))) + (if (null info) + (setq result "this line to be left as is") + (while (and info (null result)) + (setq elt (car info)) + (cond + ((stringp elt) + (setq reason elt) + ) + ((not (listp elt)) + (error "sh-get-indent-var-for-line invalid elt: %s" elt)) + ;; so it is a list + ((eq t (car elt)) + ) ;; nothing + ((symbolp (setq sym (nth 1 elt))) + ;; A bit of a kludge - when we see the sh-indent-comment + ;; ignore other variables. Otherwise it is tricky to + ;; "learn" the comment indentation. + (if (eq var 'sh-indent-comment) + (setq result var) + (if var + (setq result + "this line is controlled by more than 1 variable.") + (setq var sym)))) + (t + (error "sh-get-indent-var-for-line invalid list elt: %s" elt))) + (setq info (cdr info)) + )) + (or result + (setq result var)) + (or result + (setq result reason)) + (if (null result) + ;; e.g. just had (t POS) + (setq result "line has default indentation")) + result)) + + + +;; Finding the previous line isn't trivial. +;; We must *always* go back one more and see if that is a continuation +;; line -- it is the PREVIOUS line which is continued, not the one +;; we are going to! +;; Also, we want to treat a whole "here document" as one big line, +;; because we may want to a align to the beginning of it. +;; +;; What we do: +;; - go back to previous non-empty line +;; - if this is in a here-document, go to the beginning of it +;; - while previous line is continued, go back one line +(defun sh-prev-line (&optional end) + "Back to end of previous non-comment non-empty line. +Go to beginning of logical line unless END is non-nil, in which case +we go to the end of the previous line and do not check for continuations." + (sh-must-be-shell-mode) + (save-excursion + (beginning-of-line) + (forward-comment (- (point-max))) + (unless end (beginning-of-line)) + (when (and (not (bobp)) + (equal (get-text-property (1- (point)) 'face) + sh-heredoc-face)) + (let ((p1 (previous-single-property-change (1- (point)) 'face))) + (when p1 + (goto-char p1) + (if end + (end-of-line) + (beginning-of-line))))) + (unless end + ;; we must check previous lines to see if they are continuation lines + ;; if so, we must return position of first of them + (while (and (sh-this-is-a-continuation) + (>= 0 (forward-line -1)))) + (beginning-of-line) + (skip-chars-forward " \t")) + (point))) + + +(defun sh-prev-stmt () + "Return the address of the previous stmt or nil." + ;; This is used when we are trying to find a matching keyword. + ;; Searching backward for the keyword would certainly be quicker, but + ;; it is hard to remove "false matches" -- such as if the keyword + ;; appears in a string or quote. This way is slower, but (I think) safer. + (interactive) + (save-excursion + (let ((going t) + (start (point)) + (found nil) + (prev nil)) + (skip-chars-backward " \t;|&({[") + (while (and (not found) + (not (bobp)) + going) + ;; Do a backward-sexp if possible, else backup bit by bit... + (if (sh-safe-forward-sexp -1) + (progn + (if (looking-at sh-special-keywords) + (progn + (setq found prev)) + (setq prev (point)) + )) + ;; backward-sexp failed + (if (zerop (skip-chars-backward " \t()[\]{};`'")) + (forward-char -1)) + (if (bolp) + (let ((back (sh-prev-line nil))) + (if back + (goto-char back) + (setq going nil))))) + (unless found + (skip-chars-backward " \t") + (if (or (and (bolp) (not (sh-this-is-a-continuation))) + (eq (char-before) ?\;) + (looking-at "\\s-*[|&]")) + (setq found (point))))) + (if found + (goto-char found)) + (if found + (progn + (skip-chars-forward " \t|&({[") + (setq found (point)))) + (if (>= (point) start) + (progn + (debug "We didn't move!") + (setq found nil)) + (or found + (sh-debug "Did not find prev stmt."))) + found))) + + +(defun sh-get-word () + "Get a shell word skipping whitespace from point." + (interactive) + (skip-chars-forward "\t ") + (let ((start (point))) + (while + (if (looking-at "[\"'`]") + (sh-safe-forward-sexp) + ;; (> (skip-chars-forward "^ \t\n\"'`") 0) + (> (skip-chars-forward "-_a-zA-Z\$0-9") 0) + )) + (buffer-substring start (point)) + )) + +(defun sh-prev-thing () + "Return the previous thing this logical line." + ;; This is called when `sh-get-indent-info' is working backwards on + ;; the previous line(s) finding what keywords may be relevant for + ;; indenting. It moves over sexps if possible, and will stop + ;; on a ; and at the beginning of a line if it is not a continuation + ;; line. + ;; + ;; Added a kludge for ";;" + ;; Possible return values: + ;; nil - nothing + ;; a string - possibly a keyword + ;; + (if (bolp) + nil + (let ((going t) + c n + min-point + (start (point)) + (found nil)) + (save-restriction + (narrow-to-region + (if (sh-this-is-a-continuation) + (setq min-point (sh-prev-line nil)) + (save-excursion + (beginning-of-line) + (setq min-point (point)))) + (point)) + (skip-chars-backward " \t;") + (unless (looking-at "\\s-*;;") + (skip-chars-backward "^)}];\"'`({[") + (setq c (char-before)))) + (sh-debug "stopping at %d c is %s start=%d min-point=%d" + (point) c start min-point) + (if (< (point) min-point) + (error "point %d < min-point %d" (point) min-point)) + (cond + ((looking-at "\\s-*;;") + ;; (message "Found ;; !") + ";;") + ((or (eq c ?\n) + (eq c nil) + (eq c ?\;)) + (save-excursion + ;; skip forward over white space newline and \ at eol + (skip-chars-forward " \t\n\\\\") + (sh-debug "Now at %d start=%d" (point) start) + (if (>= (point) start) + (progn + (sh-debug "point: %d >= start: %d" (point) start) + nil) + (sh-get-word)) + )) + (t + ;; c -- return a string + (char-to-string c) + )) + ))) + + +(defun sh-this-is-a-continuation () + "Return non-nil if current line is a continuation of previous line." + (save-excursion + (and (zerop (forward-line -1)) + (looking-at ".*\\\\$") + (not (nth 4 (parse-partial-sexp (match-beginning 0) (match-end 0) + nil nil nil t)))))) + +(defun sh-get-kw (&optional where and-move) + "Return first word of line from WHERE. +If AND-MOVE is non-nil then move to end of word." + (let ((start (point))) + (if where + (goto-char where)) + (prog1 + (buffer-substring (point) + (progn (skip-chars-forward "^ \t\n;")(point))) + (unless and-move + (goto-char start))))) + +(defun sh-find-prev-matching (open close &optional depth) + "Find a matching token for a set of opening and closing keywords. +This takes into account that there may be nested open..close pairings. +OPEN and CLOSE are regexps denoting the tokens to be matched. +Optional parameter DEPTH (usually 1) says how many to look for." + (let ((parse-sexp-ignore-comments t) + prev) + (setq depth (or depth 1)) + (save-excursion + (condition-case nil + (while (and + (/= 0 depth) + (not (bobp)) + (setq prev (sh-prev-stmt))) + (goto-char prev) + (save-excursion + (if (looking-at "\\\\\n") + (progn + (forward-char 2) + (skip-chars-forward " \t"))) + (cond + ((looking-at open) + (setq depth (1- depth)) + (sh-debug "found open at %d - depth = %d" (point) depth)) + ((looking-at close) + (setq depth (1+ depth)) + (sh-debug "found close - depth = %d" depth)) + (t + )))) + (error nil)) + (if (eq depth 0) + prev ;; (point) + nil) + ))) + + +(defun sh-var-value (var &optional ignore-error) + "Return the value of variable VAR, interpreting symbols. +It can also return t or nil. +If an illegal value is found, throw an error unless Optional argument +IGNORE-ERROR is non-nil." + (let ((val (symbol-value var))) + (cond + ((numberp val) + val) + ((eq val t) + val) + ((null val) + val) + ((eq val '+) + sh-basic-offset) + ((eq val '-) + (- sh-basic-offset)) + ((eq val '++) + (* 2 sh-basic-offset)) + ((eq val '--) + (* 2 (- sh-basic-offset))) + ((eq val '*) + (/ sh-basic-offset 2)) + ((eq val '/) + (/ (- sh-basic-offset) 2)) + (t + (if ignore-error + (progn + (message "Don't know how to handle %s's value of %s" var val) + 0) + (error "Don't know how to handle %s's value of %s" var val)) + )))) + +(defun sh-set-var-value (var value &optional no-symbol) + "Set variable VAR to VALUE. +Unless optional argument NO-SYMBOL is non-nil, then if VALUE is +can be represented by a symbol then do so." + (cond + (no-symbol + (set var value)) + ((= value sh-basic-offset) + (set var '+)) + ((= value (- sh-basic-offset)) + (set var '-)) + ((eq value (* 2 sh-basic-offset)) + (set var '++)) + ((eq value (* 2 (- sh-basic-offset))) + (set var '--)) + ((eq value (/ sh-basic-offset 2)) + (set var '*)) + ((eq value (/ (- sh-basic-offset) 2)) + (set var '/)) + (t + (set var value))) + ) + + +(defun sh-calculate-indent (&optional info) + "Return the indentation for the current line. +If INFO is supplied it is used, else it is calculated from current line." + (let ((ofs 0) + (base-value 0) + elt a b var val) + (or info + (setq info (sh-get-indent-info))) + (when info + (while info + (sh-debug "info: %s ofs=%s" info ofs) + (setq elt (car info)) + (cond + ((stringp elt)) ;; do nothing? + ((listp elt) + (setq a (car (car info))) + (setq b (nth 1 (car info))) + (cond + ((eq a t) + (save-excursion + (goto-char b) + (setq val (current-indentation))) + (setq base-value val)) + ((symbolp b) + (setq val (sh-var-value b)) + (cond + ((eq a '=) + (cond + ((null val) + ;; no indentation + ;; set info to nil so we stop immediately + (setq base-value nil ofs nil info nil)) + ((eq val t) (setq ofs 0)) ;; indent as normal line + (t + ;; The following assume the (t POS) come first! + (setq ofs val base-value 0) + (setq info nil)))) ;; ? stop now + ((eq a '+) (setq ofs (+ ofs val))) + ((eq a '-) (setq ofs (- ofs val))) + (t + (error "sh-calculate-indent invalid a a=%s b=%s" a b)))) + (t + (error "sh-calculate-indent invalid elt: a=%s b=%s" a b)))) + (t + (error "sh-calculate-indent invalid elt %s" elt))) + (sh-debug "a=%s b=%s val=%s base-value=%s ofs=%s" + a b val base-value ofs) + (setq info (cdr info))) + ;; return value: + (sh-debug "at end: base-value: %s ofs: %s" base-value ofs) + + (cond + ((or (null base-value)(null ofs)) + nil) + ((and (numberp base-value)(numberp ofs)) + (sh-debug "base (%d) + ofs (%d) = %d" + base-value ofs (+ base-value ofs)) + (+ base-value ofs)) ;; return value + (t + (error "sh-calculate-indent: Help. base-value=%s ofs=%s" + base-value ofs) + nil))))) + + +(defun sh-indent-line (&optional prefix-arg) + "Indent the current line." + (interactive) + (sh-must-be-shell-mode) + (let ((indent (sh-calculate-indent)) shift-amt beg end + (pos (- (point-max) (point)))) + (when indent + (beginning-of-line) + (setq beg (point)) + (skip-chars-forward " \t") + (setq shift-amt (- indent (current-column))) + (unless (zerop shift-amt) + (delete-region beg (point)) + (indent-to indent)) + ;; If initial point was within line's indentation, + ;; position after the indentation. Else stay at same point in text. + (if (> (- (point-max) pos) (point)) + (goto-char (- (point-max) pos)))))) + + +(defun sh-blink (blinkpos &optional msg) + "Move cursor momentarily to BLINKPOS and display MSG." + ;; We can get here without it being a number on first line + (if (numberp blinkpos) + (save-excursion + (goto-char blinkpos) + (message msg) + (sit-for blink-matching-delay)) + (message msg))) + +(defun sh-show-indent (arg) + "Show the how the currently line would be indented. +This tells you which variable, if any, controls the indentation of +this line. +If optional arg ARG is non-null (called interactively with a prefix), +a pop up window describes this variable. +If variable `sh-blink' is non-nil then momentarily go to the line +we are indenting relative to, if applicable." + (interactive "P") + (sh-must-support-indent) + (let* ((info (sh-get-indent-info)) + (var (sh-get-indent-var-for-line info)) + (curr-indent (current-indentation)) + val msg) + (if (stringp var) + (message (setq msg var)) + (setq val (sh-calculate-indent info)) + + (if (eq curr-indent val) + (setq msg (format "%s is %s" var (symbol-value var))) + (setq msg + (if val + (format "%s (%s) would change indent from %d to: %d" + var (symbol-value var) curr-indent val) + (format "%s (%s) would leave line as is" + var (symbol-value var))) + )) + (if (and arg var) + (describe-variable var))) + (if sh-blink + (let ((info (sh-get-indent-info))) + (if (and info (listp (car info)) + (eq (car (car info)) t)) + (sh-blink (nth 1 (car info)) msg) + (message msg))) + (message msg)) + )) + +(defun sh-set-indent () + "Set the indentation for the current line. +If the current line is controlled by an indentation variable, prompt +for a new value for it." + (interactive) + (sh-must-support-indent) + (let* ((info (sh-get-indent-info)) + (var (sh-get-indent-var-for-line info)) + val val0 new-val old-val indent-val) + (if (stringp var) + (message (format "Cannot set indent - %s" var)) + (setq old-val (symbol-value var)) + (setq val (sh-read-variable var)) + (condition-case nil + (progn + (set var val) + (setq indent-val (sh-calculate-indent info)) + (if indent-val + (message "Variable: %s Value: %s would indent to: %d" + var (symbol-value var) indent-val) + (message "Variable: %s Value: %s would leave line as is." + var (symbol-value var))) + ;; I'm not sure about this, indenting it now? + ;; No. Because it would give the impression that an undo would + ;; restore thing, but the value has been altered. + ;; (sh-indent-line) + ) + (error + (set var old-val) + (message "Bad value for %s, restoring to previous value %s" + var old-val) + (sit-for 1) + nil)) + ))) + + +(defun sh-learn-line-indent (arg) + "Learn how to indent a line as it currently is indented. + +If there is an indentation variable which controls this line's indentation, +then set it to a value which would indent the line the way it +presently is. + +If the value can be represented by one of the symbols then do so +unless optional argument ARG (the prefix when interactive) is non-nil." + (interactive "*P") + (sh-must-support-indent) + ;; I'm not sure if we show allow learning on an empty line. + ;; Though it might occasionally be useful I think it usually + ;; would just be confusing. + (if (save-excursion + (beginning-of-line) + (looking-at "\\s-*$")) + (message "sh-learn-line-indent ignores empty lines.") + (let* ((info (sh-get-indent-info)) + (var (sh-get-indent-var-for-line info)) + ival sval diff new-val + (no-symbol arg) + (curr-indent (current-indentation))) + (cond + ((stringp var) + (message (format "Cannot learn line - %s" var))) + ((eq var 'sh-indent-comment) + ;; This is arbitrary... + ;; - if curr-indent is 0, set to curr-indent + ;; - else if it has the indentation of a "normal" line, + ;; then set to t + ;; - else set to curr-indent. + (setq sh-indent-comment + (if (= curr-indent 0) + 0 + (let* ((sh-indent-comment t) + (val2 (sh-calculate-indent info))) + (if (= val2 curr-indent) + t + curr-indent)))) + (message "%s set to %s" var (symbol-value var)) + ) + ((numberp (setq sval (sh-var-value var))) + (setq ival (sh-calculate-indent info)) + (setq diff (- curr-indent ival)) + + (sh-debug "curr-indent: %d ival: %d diff: %d var:%s sval %s" + curr-indent ival diff var sval) + (setq new-val (+ sval diff)) +;;; I commented out this because someone might want to replace +;;; a value of `+' with the current value of sh-basic-offset +;;; or vice-versa. +;;; (if (= 0 diff) +;;; (message "No change needed!") + (sh-set-var-value var new-val no-symbol) + (message "%s set to %s" var (symbol-value var)) + ) + (t + (debug) + (message "Cannot change %s" var)))))) + + + +(defun sh-mark-init (buffer) + "Initialize a BUFFER to be used by `sh-mark-line'." + (let ((main-buffer (current-buffer))) + (save-excursion + (set-buffer (get-buffer-create buffer)) + (erase-buffer) + (occur-mode) + (setq occur-buffer main-buffer) + ))) + + +(defun sh-mark-line (message point buffer &optional add-linenum occur-point) + "Insert MESSAGE referring to location POINT in current buffer into BUFFER. +Buffer BUFFER is in `occur-mode'. +If ADD-LINENUM is non-nil the message is preceded by the line number. +If OCCUR-POINT is non-nil then the line is marked as a new occurrence +so that `occur-next' and `occur-prev' will work." + (let ((m1 (make-marker)) + (main-buffer (current-buffer)) + start + (line "")) + (when point + (set-marker m1 point (current-buffer)) + (if add-linenum + (setq line (format "%d: " (1+ (count-lines 1 point)))))) + (save-excursion + (if (get-buffer buffer) + (set-buffer (get-buffer buffer)) + (set-buffer (get-buffer-create buffer)) + (occur-mode) + (setq occur-buffer main-buffer) + ) + (goto-char (point-max)) + (setq start (point)) + (insert line) + (if occur-point + (setq occur-point (point))) + (insert message) + (if point + (add-text-properties + start (point) + '(mouse-face highlight + help-echo "mouse-2: go to the line where I learned this"))) + (insert "\n") + (if point + (progn + (put-text-property start (point) 'occur m1) + (if occur-point + (put-text-property occur-point (1+ occur-point) + 'occur-point t)) + )) + ))) + + + +;; Is this really worth having? +(defvar sh-learned-buffer-hook nil + "*An abnormal hook, called with an alist of learned variables.") +;;; Example of how to use sh-learned-buffer-hook +;; +;; (defun what-i-learned (list) +;; (let ((p list)) +;; (save-excursion +;; (set-buffer "*scratch*") +;; (goto-char (point-max)) +;; (insert "(setq\n") +;; (while p +;; (insert (format " %s %s \n" +;; (nth 0 (car p)) (nth 1 (car p)))) +;; (setq p (cdr p))) +;; (insert ")\n") +;; ))) +;; +;; (add-hook 'sh-learned-buffer-hook 'what-i-learned) + + +;; Originally this was sh-learn-region-indent (beg end) +;; However, in practice this was awkward so I changed it to +;; use the whole buffer. Use narrowing if needbe. +(defun sh-learn-buffer-indent (&optional arg) + "Learn how to indent the buffer the way it currently is. + +Output in buffer \"*indent*\" shows any lines which have conflicting +values of a variable, and the final value of all variables learned. +This buffer is popped to automatically if there are any discrepancies. + +If no prefix ARG is given, then variables are set to numbers. +If a prefix arg is given, then variables are set to symbols when +applicable -- e.g. to symbol `+' if the value is that of the +basic indent. +If a positive numerical prefix is given, then `sh-basic-offset' +is set to the prefix's numerical value. +Otherwise, sh-basic-offset may or may not be changed, according +to the value of variable `sh-learn-basic-offset'. + +Abnormal hook `sh-learned-buffer-hook' if non-nil is called when the +function completes. The function is abnormal because it is called +with an alist of variables learned. This feature may be changed or +removed in the future. + +This command can often take a long time to run." + (interactive "P") + (sh-must-support-indent) + (save-excursion + (goto-char (point-min)) + (let ((learned-var-list nil) + (out-buffer "*indent*") + (num-diffs 0) + last-pos + previous-set-info + (max 17) + vec + msg + (comment-col nil) ;; number if all same, t if seen diff values + (comments-always-default t) ;; nil if we see one not default + initial-msg + (specified-basic-offset (and arg (numberp arg) + (> arg 0))) + (linenum 0) + suggested) + (setq vec (make-vector max 0)) + (sh-mark-init out-buffer) + + (if specified-basic-offset + (progn + (setq sh-basic-offset arg) + (setq initial-msg + (format "Using specified sh-basic-offset of %d" + sh-basic-offset))) + (setq initial-msg + (format "Initial value of sh-basic-offset: %s" + sh-basic-offset))) + + (while (< (point) (point-max)) + (setq linenum (1+ linenum)) + ;; (if (zerop (% linenum 10)) + (message "line %d" linenum) + ;; ) + (unless (looking-at "\\s-*$") ;; ignore empty lines! + (let* ((sh-indent-comment t) ;; info must return default indent + (info (sh-get-indent-info)) + (var (sh-get-indent-var-for-line info)) + sval ival diff new-val + (curr-indent (current-indentation))) + (cond + ((null var) + nil) + ((stringp var) + nil) + ((numberp (setq sval (sh-var-value var 'no-error))) + ;; the numberp excludes comments since sval will be t. + (setq ival (sh-calculate-indent)) + (setq diff (- curr-indent ival)) + (setq new-val (+ sval diff)) + (sh-set-var-value var new-val 'no-symbol) + (unless (looking-at "\\s-*#") ;; don't learn from comments + (if (setq previous-set-info (assoc var learned-var-list)) + (progn + ;; it was already there, is it same value ? + (unless (eq (symbol-value var) + (nth 1 previous-set-info)) + (sh-mark-line + (format "Variable %s was set to %s" + var (symbol-value var)) + (point) out-buffer t t) + (sh-mark-line + (format " but was previously set to %s" + (nth 1 previous-set-info)) + (nth 2 previous-set-info) out-buffer t) + (setq num-diffs (1+ num-diffs)) + ;; (delete previous-set-info learned-var-list) + (setcdr previous-set-info + (list (symbol-value var) (point))) + ) + ) + (setq learned-var-list + (append (list (list var (symbol-value var) + (point))) + learned-var-list))) + (if (numberp new-val) + (progn + (sh-debug + "This line's indent value: %d" new-val) + (if (< new-val 0) + (setq new-val (- new-val))) + (if (< new-val max) + (aset vec new-val (1+ (aref vec new-val)))))) + )) + ((eq var 'sh-indent-comment) + (unless (= curr-indent (sh-calculate-indent info)) + ;; this is not the default indentation + (setq comments-always-default nil) + (if comment-col ;; then we have see one before + (or (eq comment-col curr-indent) + (setq comment-col t)) ;; seen a different one + (setq comment-col curr-indent)) + )) + (t + (sh-debug "Cannot learn this line!!!") + )) + (sh-debug + "at %s learned-var-list is %s" (point) learned-var-list) + )) + (forward-line 1) + ) ;; while + (if sh-debug + (progn + (setq msg (format + "comment-col = %s comments-always-default = %s" + comment-col comments-always-default)) + ;; (message msg) + (sh-mark-line msg nil out-buffer))) + (cond + ((eq comment-col 0) + (setq msg "\nComments are all in 1st column.\n")) + (comments-always-default + (setq msg "\nComments follow default indentation.\n") + (setq comment-col t)) + ((numberp comment-col) + (setq msg (format "\nComments are in col %d." comment-col))) + (t + (setq msg "\nComments seem to be mixed, leaving them as is.\n") + (setq comment-col nil) + )) + (sh-debug msg) + (sh-mark-line msg nil out-buffer) + + (sh-mark-line initial-msg nil out-buffer t t) + + (setq suggested (sh-guess-basic-offset vec)) + + (if (and suggested (not specified-basic-offset)) + (let ((new-value + (cond + ;; t => set it if we have a single value as a number + ((and (eq sh-learn-basic-offset t) (numberp suggested)) + suggested) + ;; other non-nil => set it if only one value was found + (sh-learn-basic-offset + (if (numberp suggested) + suggested + (if (= (length suggested) 1) + (car suggested)))) + (t + nil)))) + (if new-value + (progn + (setq learned-var-list + (append (list (list 'sh-basic-offset + (setq sh-basic-offset new-value) + (point-max))) + learned-var-list)) + ;; Not sure if we need to put this line in, since + ;; it will appear in the "Learned variable settings". + (sh-mark-line + (format "Changed sh-basic-offset to: %d" sh-basic-offset) + nil out-buffer)) + (sh-mark-line + (if (listp suggested) + (format "Possible value(s) for sh-basic-offset: %s" + (mapconcat 'int-to-string suggested " ")) + (format "Suggested sh-basic-offset: %d" suggested)) + nil out-buffer)))) + + + (setq learned-var-list + (append (list (list 'sh-indent-comment comment-col (point-max))) + learned-var-list)) + (setq sh-indent-comment comment-col) + (let ((name (buffer-name)) + (lines (if (and (eq (point-min) 1) + (eq (point-max) (1+ (buffer-size)))) + "" + (format "lines %d to %d of " + (1+ (count-lines 1 (point-min))) + (1+ (count-lines 1 (point-max)))))) + ) + (sh-mark-line "\nLearned variable settings:" nil out-buffer) + (if arg + ;; Set learned variables to symbolic rather than numeric + ;; values where possible. + (dolist (learned-var (reverse learned-var-list)) + (let ((var (car learned-var)) + (val (nth 1 learned-var))) + (when (and (not (eq var 'sh-basic-offset)) + (numberp val)) + (sh-set-var-value var val))))) + (dolist (learned-var (reverse learned-var-list)) + (let ((var (car learned-var))) + (sh-mark-line (format " %s %s" var (symbol-value var)) + (nth 2 learned-var) out-buffer))) + (save-excursion + (set-buffer out-buffer) + (goto-char (point-min)) + (insert + (format "Indentation values for buffer %s.\n" name) + (format "%d indentation variable%s different values%s\n\n" + num-diffs + (if (= num-diffs 1) + " has" "s have") + (if (zerop num-diffs) + "." ":")) + ))) + ;; Are abnormal hooks considered bad form? + (run-hook-with-args 'sh-learned-buffer-hook learned-var-list) + (if (or sh-popup-occur-buffer (> num-diffs 0)) + (pop-to-buffer out-buffer)) + ))) + +(defun sh-guess-basic-offset (vec) + "See if we can determine a reasonable value for `sh-basic-offset'. +This is experimental, heuristic and arbitrary! +Argument VEC is a vector of information collected by +`sh-learn-buffer-indent'. +Return values: + number - there appears to be a good single value + list of numbers - no obvious one, here is a list of one or more + reasonable choices + nil - we couldn't find a reasonable one." + (let* ((max (1- (length vec))) + (i 1) + (totals (make-vector max 0)) + (return nil) + j) + (while (< i max) + (aset totals i (+ (aref totals i) (* 4 (aref vec i)))) + (setq j (/ i 2)) + (if (zerop (% i 2)) + (aset totals i (+ (aref totals i) (aref vec (/ i 2))))) + (if (< (* i 2) max) + (aset totals i (+ (aref totals i) (aref vec (* i 2))))) + (setq i (1+ i))) + + (let ((x nil) + (result nil) + tot sum p) + (setq i 1) + (while (< i max) + (if (/= (aref totals i) 0) + (setq x (append x (list (cons i (aref totals i)))))) + (setq i (1+ i))) + + (setq x (sort x (lambda (a b) (> (cdr a) (cdr b))))) + (setq tot (apply '+ (append totals nil))) + (sh-debug (format "vec: %s\ntotals: %s\ntot: %d" + vec totals tot)) + (cond + ((zerop (length x)) + (message "no values!")) ;; we return nil + ((= (length x) 1) + (message "only value is %d" (car (car x))) + (setq result (car (car x)))) ;; return single value + ((> (cdr (car x)) (/ tot 2)) + ;; 1st is > 50% + (message "basic-offset is probably %d" (car (car x))) + (setq result (car (car x)))) ;; again, return a single value + ((>= (cdr (car x)) (* 2 (cdr (car (cdr x))))) + ;; 1st is >= 2 * 2nd + (message "basic-offset could be %d" (car (car x))) + (setq result (car (car x)))) + ((>= (+ (cdr (car x))(cdr (car (cdr x)))) (/ tot 2)) + ;; 1st & 2nd together >= 50% - return a list + (setq p x sum 0 result nil) + (while (and p + (<= (setq sum (+ sum (cdr (car p)))) (/ tot 2))) + (setq result (append result (list (car (car p))))) + (setq p (cdr p))) + (message "Possible choices for sh-basic-offset: %s" + (mapconcat 'int-to-string result " "))) + (t + (message "No obvious value for sh-basic-offset. Perhaps %d" + (car (car x))) + ;; result is nil here + )) + result))) + +;; ======================================================================== + +;; Styles -- a quick and dirty way of saving the indentation settings. + +(defvar sh-styles-alist nil + "A list of all known shell indentation styles.") + +(defun sh-name-style (name &optional confirm-overwrite) + "Name the current indentation settings as a style called NAME. +If this name exists, the command will prompt whether it should be +overwritten if +- - it was called interactively with a prefix argument, or +- - called non-interactively with optional CONFIRM-OVERWRITE non-nil." + ;; (interactive "sName for this style: ") + (interactive + (list + (read-from-minibuffer "Name for this style? " ) + (not current-prefix-arg))) + (let ((slist (cons name + (mapcar (lambda (var) (cons var (symbol-value var))) + sh-var-list))) + (style (assoc name sh-styles-alist))) + (if style + (if (and confirm-overwrite + (not (y-or-n-p "This style exists. Overwrite it? "))) + (message "Not changing style %s" name) + (message "Updating style %s" name) + (setcdr style (cdr slist))) + (message "Creating new style %s" name) + (push slist sh-styles-alist)))) + +(defun sh-load-style (name) + "Set shell indentation values for this buffer from those in style NAME." + (interactive (list (completing-read + "Which style to use for this buffer? " + sh-styles-alist nil t))) + (let ((sl (assoc name sh-styles-alist))) + (if (null sl) + (error "sh-load-style - style %s not known" name) + (dolist (var (cdr sl)) + (set (car var) (cdr var)))))) + +(defun sh-save-styles-to-buffer (buff) + "Save all current styles in elisp to buffer BUFF. +This is always added to the end of the buffer." + (interactive (list + (read-from-minibuffer "Buffer to save styles in? " "*scratch*"))) + (with-current-buffer (get-buffer-create buff) + (goto-char (point-max)) + (insert "\n") + (pp `(setq sh-styles-alist ',sh-styles-alist) (current-buffer)))) + + + ;; statement syntax-commands for various shells ;; You are welcome to add the syntax or even completely new statements as ＠＠ -1153,47 +3121,51 ＠＠ < < "endsw") (es) (rc "expression: " - "switch( " str " ) {" \n + > "switch( " str " ) {" \n > "case " (read-string "pattern: ") \n > _ \n ( "other pattern, %s: " - < "case " str \n + "case " str > \n > _ \n) - < "case *" \n + "case *" > \n > _ \n resume: - < < ?}) + ?} > ) (sh "expression: " - "case " str " in" \n - > (read-string "pattern: ") ?\) \n + > "case " str " in" \n + > (read-string "pattern: ") + (propertize ")" 'syntax-table sh-st-punc) + \n > _ \n ";;" \n ( "other pattern, %s: " - < str ?\) \n + > str (propertize ")" 'syntax-table sh-st-punc) \n > _ \n ";;" \n) - < "*)" \n + > "*" (propertize ")" 'syntax-table sh-st-punc) \n > _ \n resume: - < < "esac")) + "esac" > )) (define-skeleton sh-for "Insert a for loop. See `sh-feature'." (csh eval sh-modify sh - 1 "foreach " - 3 " ( " - 5 " )" - 15 "end") + 1 "" + 2 "foreach " + 4 " ( " + 6 " )" + 15 '< + 16 "end") (es eval sh-modify rc - 3 " = ") + 4 " = ") (rc eval sh-modify sh - 1 "for( " - 5 " ) {" - 15 ?}) + 2 "for( " + 6 " ) {" + 15 ?} ) (sh "Index variable: " - "for " str " in " _ "; do" \n + > "for " str " in " _ "; do" \n > _ | ?$ & (sh-remember-variable str) \n - < "done")) + "done" > )) ＠＠ -1207,34 +3179,34 ＠＠ "＠ " str "++" \n < "end") (es eval sh-modify rc - 3 " =") + 4 " =") (ksh88 "Index variable: " - "integer " str "=0" \n - "while (( ( " str " += 1 ) <= " + > "integer " str "=0" \n + > "while (( ( " str " += 1 ) <= " (read-string "upper limit: ") " )); do" \n - > _ ?$ (sh-remember-variable str) \n - < "done") + > _ ?$ (sh-remember-variable str) > \n + "done" > ) (posix "Index variable: " - str "=1" \n + > str "=1" \n "while [ $" str " -le " (read-string "upper limit: ") " ]; do" \n > _ ?$ str \n str ?= (sh-add (sh-remember-variable str) 1) \n - < "done") + "done" > ) (rc "Index variable: " - "for( " str " in" " `{awk 'BEGIN { for( i=1; i<=" + > "for( " str " in" " `{awk 'BEGIN { for( i=1; i<=" (read-string "upper limit: ") - "; i++ ) print i }'}) {" \n + "; i++ ) print i }'`}) {" \n > _ ?$ (sh-remember-variable str) \n - < ?}) + ?} >) (sh "Index variable: " - "for " str " in `awk 'BEGIN { for( i=1; i<=" + > "for " str " in `awk 'BEGIN { for( i=1; i<=" (read-string "upper limit: ") "; i++ ) print i }'`; do" \n > _ ?$ (sh-remember-variable str) \n - < "done")) + "done" > )) (defun sh-shell-initialize-variables () ＠＠ -1313,7 +3285,7 ＠＠ > _ \n < "}") (rc eval sh-modify ksh88 - 1 "fn ") + 1 "fn ") (sh () "() {" \n > _ \n ＠＠ -1334,46 +3306,51 ＠＠ resume: < "endif") (es "condition: " - "if { " str " } {" \n - > _ \n - ( "other condition, %s: " - < "} { " str " } {" \n - > _ \n) - < "} {" \n - > _ \n - resume: - < ?}) - (rc eval sh-modify csh - 3 " ) {" - 8 '( "other condition, %s: " - < "} else if( " str " ) {" \n - > _ \n) - 10 "} else {" - 17 ?}) - (sh "condition: " - '(setq input (sh-feature sh-test)) - "if " str "; then" \n + > "if { " str " } {" \n > _ \n ( "other condition, %s: " - < "elif " str "; then" \n + "} { " str " } {" > \n > _ \n) - < "else" \n + "} {" > \n + > _ \n + resume: + ?} > ) + (rc "condition: " + > "if( " str " ) {" \n + > _ \n + ( "other condition, %s: " + "} else if( " str " ) {" > \n + > _ \n) + "} else {" > \n + > _ \n + resume: + ?} > + ) + (sh "condition: " + '(setq input (sh-feature sh-test)) + > "if " str "; then" \n > _ \n + ( "other condition, %s: " + > "elif " str "; then" > \n + > \n) + "else" > \n + > \n resume: - < "fi")) + "fi" > )) (define-skeleton sh-repeat "Insert a repeat loop definition. See `sh-feature'." (es nil - "forever {" \n + > "forever {" \n > _ \n - < ?}) + ?} > ) (zsh "factor: " - "repeat " str "; do"\n - > _ \n - < "done")) + > "repeat " str "; do" > \n + > \n + "done" > )) + ;;;(put 'sh-repeat 'menu-enable '(sh-feature sh-repeat)) ＠＠ -1381,9 +3358,10 ＠＠ (define-skeleton sh-select "Insert a select statement. See `sh-feature'." (ksh88 "Index variable: " - "select " str " in " _ "; do" \n + > "select " str " in " _ "; do" \n > ?$ str \n - < "done")) + "done" > ) + (bash eval sh-append ksh88)) ;;;(put 'sh-select 'menu-enable '(sh-feature sh-select)) ＠＠ -1400,21 +3378,22 ＠＠ "exit:\n" "rm $tmp* >&/dev/null" >) (es (file-name-nondirectory (buffer-file-name)) - "local( signals = $signals sighup sigint; tmp = /tmp/" str ".$pid ) {" \n + > "local( signals = $signals sighup sigint; tmp = /tmp/" str + ".$pid ) {" \n > "catch ＠ e {" \n > "rm $tmp^* >[2]/dev/null" \n "throw $e" \n - < "} {" \n - > _ \n - < ?} \n - < ?}) + "} {" > \n + _ \n + ?} > \n + ?} > ) (ksh88 eval sh-modify sh - 6 "EXIT") + 7 "EXIT") (rc (file-name-nondirectory (buffer-file-name)) - "tmp = /tmp/" str ".$pid" \n - "fn sigexit { rm $tmp^* >[2]/dev/null }") + > "tmp = /tmp/" str ".$pid" \n + "fn sigexit { rm $tmp^* >[2]/dev/null }") (sh (file-name-nondirectory (buffer-file-name)) - "TMP=/tmp/" str ".$$" \n + > "TMP=${TMPDIR:-/tmp}/" str ".$$" \n "trap \"rm $TMP* 2>/dev/null\" " ?0)) ＠＠ -1423,9 +3402,9 ＠＠ "Insert an until loop. See `sh-feature'." (sh "condition: " '(setq input (sh-feature sh-test)) - "until " str "; do" \n + > "until " str "; do" \n > _ \n - < "done")) + "done" > )) ;;;(put 'sh-until 'menu-enable '(sh-feature sh-until)) ＠＠ -1433,20 +3412,24 ＠＠ (define-skeleton sh-while "Insert a while loop. See `sh-feature'." (csh eval sh-modify sh - 2 "while( " - 4 " )" - 10 "end") - (es eval sh-modify rc - 2 "while { " - 4 " } {") - (rc eval sh-modify csh - 4 " ) {" - 10 ?}) + 2 "" + 3 "while( " + 5 " )" + 10 '< + 11 "end") + (es eval sh-modify sh + 3 "while { " + 5 " } {" + 10 ?} ) + (rc eval sh-modify sh + 3 "while( " + 5 " ) {" + 10 ?} ) (sh "condition: " '(setq input (sh-feature sh-test)) - "while " str "; do" \n + > "while " str "; do" \n > _ \n - < "done")) + "done" > )) ＠＠ -1486,9 +3469,8 ＠＠ (posix eval sh-modify sh 18 "$(basename $0)") (sh "optstring: " - "while getopts :" str " OPT; do" \n + > "while getopts :" str " OPT; do" \n > "case $OPT in" \n - > > '(setq v1 (append (vconcat str) nil)) ( (prog1 (if v1 (char-to-string (car v1))) (if (eq (nth 1 v1) ?:) ＠＠ -1496,20 +3478,22 ＠＠ v2 "\"$OPTARG\"") (setq v1 (cdr v1) v2 nil))) - < str "|+" str ?\) \n + > str "|+" str (propertize ")" 'syntax-table sh-st-punc) \n > _ v2 \n - ";;" \n) - < "*)" \n + > ";;" \n) + > "*" (propertize ")" 'syntax-table sh-st-punc) \n > "echo" " \"usage: " "`basename $0`" " [+-" '(setq v1 (point)) str '(save-excursion (while (search-backward ":" v1 t) (replace-match " ARG] [+-" t t))) (if (eq (preceding-char) ?-) -5) - "] [--] ARGS...\"" \n - "exit 2" \n - < < "esac" \n - < "done" \n + (if (and (sequencep v1) (length v1)) "] " "} ") + "[--] ARGS...\"" \n + "exit 2" > \n + "esac" > + \n "done" + > \n "shift " (sh-add "OPTIND" -1))) ＠＠ -1530,7 +3514,7 ＠＠ (defun sh-maybe-here-document (arg) - "Inserts self. Without prefix, following unquoted `<' inserts here document. + "Insert self. Without prefix, following unquoted `<' inserts here document. The document is bounded by `sh-here-document-word'." (interactive "*P") (self-insert-command (prefix-numeric-value arg)) ＠＠ -1578,14 +3562,11 ＠＠ (point))) (newline)))) - - (defun sh-beginning-of-command () "Move point to successive beginnings of commands." (interactive) (if (re-search-backward sh-beginning-of-command nil t) (goto-char (match-beginning 2)))) - (defun sh-end-of-command () "Move point to successive ends of commands." -- Jérôme Marant

2 participants
2 comments

Re: [PATCH] Sync sh-script.el with GNU Emacs 21.4 19 years, 2 months

Malcolm Purvis

Dear Jérôme, Thank you to for the patch. By coincidence I happened to be working on a sync of sh-script.el to the latest Emacs CVS that I'm currently testing, but I don't mind you finishing first. I have one comment after quickly comparing the two efforts: I found that the menu map definitions in sh-mode-map did not work expected (this bug is also in the existing code). Go get the menu bar to work I stripped all references to menu-map out of sh-mode-map and added the following straight after it: --------------------------------------------------------------------------- (easy-menu-define sh-mode-menu sh-mode-map "Menu for sh-script mode" '("Insert" ["While Loop" sh-while t] ["Until Loop" sh-until t] ["Temporary File" sh-tmp-file t] ["Select Statement" sh-select t] ["Repeat Loop" sh-repeat t] ["Options Loop" sh-while-getopts t] ["Indexed Loop" sh-indexed-loop t] ["If Statement" sh-if t] ["For Loop" sh-for t] ["Case Statement" sh-case t])) --------------------------------------------------------------------------- I then added the following to sh-mode: --------------------------------------------------------------------------- (if sh-mode-menu (easy-menu-add sh-mode-menu)); XEmacs --------------------------------------------------------------------------- The rest of the patch seems OK to me. Malcolm -- Malcolm Purvis <malcolmp(a)xemacs.org>

2 participants
2 comments

Re: [PATCH] Sync sh-script.el with GNU Emacs 21.4 19 years, 2 months

Adrian Aichner

"JXrXme Marant" <jmarant(a)free.fr> writes: > Hi, > > This is a first attempt at using patcher as well syncing with > GNU Emacs. It has been tested, I hope it works for you. > > At first glance, patcher looks very nice. > > Cheers, Thanks for the patch, Jérôme! Here are some things I noticed. The change from > -(defcustom sh-mode-hook nil > - "*Hook run by `sh-mode'." > -:type 'hook > -:group 'sh) > > -(defcustom sh-set-shell-hook nil > - "*Hook run by `sh-set-shell'." > -:type 'hook > -:group 'sh) to the following block changes the customization group from 'sh to 'sh-script. > +(defcustom sh-set-shell-hook nil > + "*Hook run by `sh-set-shell'." > +:type 'hook > +:group 'sh-script) > + > +(defcustom sh-mode-hook nil > + "*Hook run by `sh-mode'." > +:type 'hook > +:group 'sh-script) Is this incompatible change acceptable? The removal of XEmacs comments (the usual convention is ;; XEmacs change: ... ) is normally not OK, since it's a marker for things to watch out for. > (defcustom sh-alias-alist > - ;; XEmacs: Linux is spelled `linux' > (nconc (if (eq system-type 'linux) > '((csh . tcsh) > (ksh . pdksh))) In this case I can't see anything wrong with this removal, though. The following is such a loss of an XEmacs-specific change: This should have been marked ;; XEmacs change: ... and not ;; GDF which is the acronym of a nowadays mostly inactive developer. I ran out of energy here and the rest of your patch is not reviewed. <2507 lines deleted by Adrian Aichner> > ＠＠ -1578,14 +3554,11 ＠＠ > (point))) > (newline)))) > > - > - > (defun sh-beginning-of-command () > "Move point to successive beginnings of commands." > (interactive) > (if (re-search-backward sh-beginning-of-command nil t) > (goto-char (match-beginning 2)))) > - > > (defun sh-end-of-command () > "Move point to successive ends of commands." > > Above citation is the end of your mail. It would be a good idea to use a signature or other indication for the end of your mail. Lost data is not unheard off, and I have no way of knowing whether this was really the end of your mail. Thanks again for your contribution, perhaps you could have a look at the issues I brought up. Best regards, Adrian -- Adrian Aichner mailto:adrian＠xemacs.org http://www.xemacs.org/

3 participants
7 comments

[AC21.5] Synch build-report in core to build package version 19 years, 3 months

Stephen J. Turnbull

APPROVE COMMIT 21.5 This is an exact synch, including the CVS keywords, which means that the CVS version number is almost surely different from that in the build package. I think this should be addressed by declaring the build package version canonical, and hard-coding the relevant information in the mirrored core version. I'm submitting a related patch shortly. Index: lisp/ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lisp/ChangeLog,v retrieving revision 1.677 diff -u -r1.677 ChangeLog --- lisp/ChangeLog 4 Oct 2005 17:51:19 -0000 1.677 +++ lisp/ChangeLog 5 Oct 2005 04:02:34 -0000 ＠＠ -0,0 +1,4 ＠＠ +2005-10-04 Stephen J. Turnbull <stephen(a)xemacs.org> + + * build-report.el: Synch to Adrian's packaged version. + Index: lisp/build-report.el =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lisp/build-report.el,v retrieving revision 1.11 diff -u -r1.11 build-report.el --- lisp/build-report.el 28 Aug 2002 05:36:31 -0000 1.11 +++ lisp/build-report.el 5 Oct 2005 04:02:34 -0000 ＠＠ -1,8 +1,10 ＠＠ ;;; build-report.el --- Automatically formatted build reports for XEmacs -;; Copyright (C) 1997-2001 Adrian Aichner +;; Copyright (C) 1997-2003 Adrian Aichner ;; Author: Adrian Aichner <adrian(a)xemacs.org> +;; Date: $Date: 2003/10/18 19:14:10 $ +;; Version: $Revision: 1.49 $ ;; Keywords: internal ;; This file is part of XEmacs. ＠＠ -66,8 +68,8 ＠＠ "emacs_major_version\\s-*=\\s-*\$[0-9]+\$ emacs_minor_version\\s-*=\\s-*\$[0-9]+\$ emacs_beta_version\\s-*=\\s-*\$[0-9]+\$? -xemacs_codename\\s-*=\\s-*\"\$[^\"]+\$\" -xemacs_extra_name\\s-*=\\s-*\"\$[^\"]+\$\"" +xemacs_codename\\s-*=\\s-*\"\$[^\"]+\$\"\$ +xemacs_extra_name\\s-*=\\s-*\"\\([^\"]+\$\"\\)?" "*REGEXP matching XEmacs Beta Version variable assignments in `build-report-version-file' file. This variable is used by `build-report-version-file-data'.") ＠＠ -113,7 +115,11 ＠＠ "^Note:" "Installing" "[Ff]ile(s) copied" - "\\s-+tests\\s-+") + "\\s-+tests\\s-+" + "^[A-Z] [^ ]+$" + "^Wrong number of arguments:" + "^ \\*\\* " + "^\$FAIL\\|SKIP\$:") "*Regexp of make process output lines to keep in the report." :type '(repeat :custom-show t ＠＠ -125,6 +131,8 ＠＠ (list "confl.*with.*auto-inlining" "^Formatting:" + "^\\s-*0 .*\$failure\\|error\$s?" + "^PASS:" "(100%) tests successful") "*Regexp of make process output lines to delete from the report." :type '(repeat ＠＠ -198,6 +206,8 ＠＠ (defcustom build-report-subject (concat "[%s] " emacs-version " on " system-configuration) + ;; #### this should allow variable names which will be evalled and + ;; formatted using %s, see `build-report-prompts' "*XEmacs Build Report Subject Line. %s-sequences will be substituted with user input through `build-report' according to `build-report-prompts' using `format'." ＠＠ -208,6 +218,8 ＠＠ (defcustom build-report-prompts (quote (("Status?: " ("Success" "Failure")))) + ;; #### this should allow variable names which will be evalled and + ;; formatted using %s, see `build-report-prompts' "*XEmacs Build Report Prompt(s). This is a list of prompt-string lists used by `build-report' in conjunction with `build-report-subject'. Each list consists of a prompt string ＠＠ -248,7 +260,7 ＠＠ 'mime-editor/insert-binary-file))) (defun build-report-make-output-get () - "Returns the filename the XEmacs make output is saved in." + "Return the filename the XEmacs make output is saved in." (interactive) (if (or (string-equal build-report-make-output-dir "") (null build-report-make-output-dir)) ＠＠ -312,13 +324,13 ＠＠ (major minor beta codename extraname configuration) (build-report-installation-data build-report-installation-file) (setq build-report-subject - (format "[%%s] XEmacs %s.%s%s \"%s\" %s %s" + (format "[%%s] XEmacs %s.%s%s \"%s\" %s%s" major minor beta codename extraname configuration))) (multiple-value-bind (major minor beta codename extraname) (build-report-version-file-data build-report-version-file) (setq build-report-subject - (format "[%%s] XEmacs %s.%s%s \"%s\" %s %s" + (format "[%%s] XEmacs %s.%s%s \"%s\" %s%s" major minor beta codename extraname system-configuration)))) (compose-mail ;; `build-report-destination' used to be a single string, so ＠＠ -501,15 +513,15 ＠＠ (cond ((looking-at build-report-installation-version-regexp) (goto-char (match-end 0)) - (setq major (match-string 1)) - (setq minor (match-string 2)) - (setq beta (match-string 3)) - (setq codename (match-string 6)) - (setq extraname (match-string 7)) - (setq configuration (match-string 8))) + (setq major (or (match-string 1) "")) + (setq minor (or (match-string 2) "")) + (setq beta (or (match-string 3) "")) + (setq codename (or (match-string 6) "")) + (setq extraname (or (match-string 7) "")) + (setq configuration (or (match-string 8) ""))) ((looking-at build-report-installation-srcdir-regexp) (goto-char (match-end 0)) - (setq srcdir (match-string 1))) + (setq srcdir (or (match-string 1) ""))) ;; We avoid matching a potentially zero-length string to avoid ;; infinite looping. ((looking-at ＠＠ -535,11 +547,11 ＠＠ (cond ((looking-at build-report-version-file-regexp) (goto-char (match-end 0)) - (setq major (match-string 1)) - (setq minor (match-string 2)) - (setq beta (match-string 3)) - (setq codename (match-string 4)) - (setq extraname (match-string 5))) + (setq major (or (match-string 1) "")) + (setq minor (or (match-string 2) "")) + (setq beta (or (match-string 3) "")) + (setq codename (or (match-string 4) "")) + (setq extraname (or (match-string 6) ""))) ;; We avoid matching a potentially zero-length string to avoid ;; infinite looping. ((looking-at -- Graduate School of Systems and Information Engineering University of Tsukuba http://turnbull.sk.tsukuba.ac.jp/ Tennodai 1-1-1 Tsukuba 305-8573 JAPAN Economics of Information Communication and Computation Systems Experimental Economics, Microeconomic Theory, Game Theory

2 participants
1 comments

[PATCH COMMIT] Tramp 2.0.51 sync 19 years, 3 months

Michael Albinus

Hello, I've committed the following Tramp patch to CVS. It upgrades Tramp from 2.0.50 to 2.0.51. Best regards, Michael.

1 participants
0 comments

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

XEmacs-Patches October 2005