Re: enlightments anybody ?

On Thu, Jan 13, 2000 at 04:24:01PM +0000, Andy Piper wrote: Especially given I don't :-) Here is a copy of the description I sent last october. Questions welcome. The dumper has never ever been tested on windows. Sorry about that. OG. 1. What is dumping and its justification The C code of XEmacs is only a lisp engine with a lot of built-in primitives useful to write an editor. The editor itself is written in Lisp, and represents around 100K lines of code. Loading and executing the initialisations of all this codes takes a bit a time (five to ten times the usual startup time of current xemacs) and requires to have all the lisp source files around. Having to reload them each time the editor is stardted would not be acceptable. The traditional solution to this problem is called dumping: the building process first creates the lisp engine under the name temacs, then runs it until it has finished loading and initialising all the lisp part, and eventually creates a new executable called xemacs including both temacs and all the contents of the memory after the initialisation. This solution, while working, has a huge problem: the creation of the new executable from the actual contents of the memory is a extremely system-specific process, quite error-prone, and which interferes with a lot of system librairies (like malloc). It is even getting worse nowadays with librairies using constructors which are automatically called when the program is started (even before main()) which tend to crash when they are called multiple times, once before dumping and once after (IRIX 6.x libz.so pulls in some C++ image librairies thru dependencies which have this problem). Writing the dumper is also one of the most difficult parts of porting XEmacs to a new operating system. The aim of the portable dumper is to solve the same problem than the system-specific dumper, that is the be able to reload quickly and using a small number of files the fully initialized lisp part of the editor, without any system-specific hacks. 2. The process 2.1. Overview The portable dumping system has to: - at dump time, write all initialized, non quickly rebuildable data to a file [Note: currently xemacs.dmp, but the name will change], along with all informations needed for the reloading. - when starting xemacs, reload the dump file, relocate it to its new starting address if needed, and reinitialise all pointers to this data. Also, rebuild all the quickly rebuildable data. 2.2. Data descriptions The more complex task of the dumper is to be able to write lisp objects (lrecords) and C structs to disk and reload them at a different address, updating all the pointers they include in the process. This is done by using external data descriptions that give information about the layout of the structures in memory. The specification of these descriptions is in lrecord.h. A description for a lrecord is an array of struct lrecord_description. Each of these structs include a type, an offset in the structure and some optional parameters depending on the type. For instance, here is the string description: static const struct lrecord_description string_description[] = { { XD_LISP_OBJECT, offsetof(Lisp_String, plist), 1 }, { XD_OPAQUE_DATA_PTR, offsetof(Lisp_String, data), XD_INDIRECT(2, 1) }, { XD_BYTECOUNT, offsetof(Lisp_String, size) }, { XD_END } }; The first line means "there is a Lisp_Object at plist in the Lisp_String structure". The second means "there is a pointer to some opaque data in the field 'data'". The length of said data is given by the expression XD_INDIRECT(2, 1), which means "the value in the 3rd line of the description (line number 2 starting counting at 0, welcome to C) plus one". The third line indicates a member of type Bytecount, which is used by the previous indirect directive. XD_END then ends the description. This gives all the information we need to move around what is pointed by a structure (C or lrecord) and, by transitivity, everything that points to it. The only missing information for dumping is the size of the structure. For lrecords, this is part of the lrecord_implementation, hence we do not need to duplicate it. For C structures we use a struct struct_description, which includes a size field and a pointer to an associated array of lrecord_description. 2.3. Dumping phase 2.3.1. Start The dumping is done by calling the function pdump() (in alloc.c) which is done by Fdump_emacs (in emacs.c). This function does a number of tasks. 2.3.2. Object inventory The first task is to build the list of the objects to dump. This includes: - lisp objects - C structures We end up with one pdump_entry_list_elmt per object group (arrays of C structs are kept together) which includes a pointer to the first object of the group, the per-object size and the count of objects in the group, along with some other informations which are initialised later. These entries are linked together in pdump_entry_list structures and can be enumerated thru either: - the pdump_object_table, an array of pdump_entry_list, one per lrecord type, indexed by type number. - the pdump_opaque_data_list, used for the opaque data which does not include pointers, and hence does not need descriptions. - the pdump_struct_table, which is a vector of struct_description/pdump_entry_list pairs, used for non-opaque C structures. This uses a marking strategy similar to the garbage collector. Some differences though: - we do not use the mark bit (which does not exist for C structures anyway), we use a big hash table instead. - we do not use the mark function of lrecords but instead rely on the external descriptions. This happens essentially because we need to follow pointers to C structures and opaque data in addition to Lisp_Object members. This is done by pdump_register_object, which handles Lisp_Object variables, and pdump_register_struct which handles C structures, which both delegate the description management to pdump_register_sub. The hashtable doubles as a map object to pdump_entry_list_elmt (i.e, allows to lookup a pdump_entry_list_elmt with the object it points to). Entries are added with pdump_add_entry and looked up with pdump_get_entry. There is no need for entry removal. The hash value is computed quite basically from the object pointer by pdump_make_hash. The roots for the marking are: - the staticpro'ed variables (there is a special staticpro_nodump call for protected variables we do not want to dump). - the pdump_wire'd variables (staticpro is equivalent to staticpro_nodump + pdump_wire). - the dumpstruct'ed variables, which points to C structures. This does not include the GCPRO'ed variables, the specbinds, the catchtags, the backlist, the redisplay or the profiling info, since we do not want to rebuild the actual chain of lisp calls which end up to the dump-emacs call, only the global variables. Weak lists and weak hash tables are dumped as if they were their non-weak equivalent (without changing their type, of course). This has not yet been a problem. 2.3.3. Address allocation The next step is to allocate the offsets of each of the objects in the final dump file. This is done by pdump_allocate_offset which is called indirectly by pdump_scan_by_alignement. The strategy to deal with alignment problems uses these facts: - real world alignment requirements are powers of two. - the C compiler is required to adjust the sizeof of a struct so that you can have an array of them next to each other. This means you can have a upper bound of the alignment requirements of a given structure by looking at which power of two its size is a multiple. - the non-variant part of variable size lrecords has an alignement requirement of 4. Hence, for each lrecord type, C struct type or opaque data block the alignment requirement is computed as a power of two, with a minimum of 2^2 for lrecords. pdump_scan_by_alignement then scans all the pdump_entry_list_elmt the ones with the highest requirements first. This ensures the best compacity. The maximum alignment requirement we take into account is 2^8. pdump_allocate_offset only has to do a linear allocation, starting at offset 256 (this leaves room for the header and keep the alignments happy). 2.3.4. The header The next step creates the file and writes a header with a signature and some random informations in it (number of staticpro, number of assigned lrecord types, etc...). The reloc_address field, which indicates at which address the file should be loaded if we want to avoid post-reload relocation, is set to 0. It then seeks to offset 256 (base offset for the objects). 2.3.5. Data dumping The data is dumped in the same order the address were allocated by pdump_dump_data called from pdump_scan_by_alignement. This function copies the data to a temporary buffer, relocates all pointers in the object to the addresses allocated in step 2.3.3, and writes it to the file. Using the same order means that, if we are careful with lrecords whose size is not a multiple of 4, we are ensured that the object is always written at the offset in the file allocated in step 2.3.3. 2.3.6. Pointers dumping A bunch of tables needed to reassign properly the global pointers are then written. They are: - the staticpro array - the dumpstruct array - the lrecord_implementation table array - a vector of all the offsets to the objects in the file that include a description (for faster relocation at reload time) - the pdump_wired and pdump_wired_list arrays For each of the arrays we write both the pointer to the variables and the relocated offset of the object they point to. Since these variables are global the pointers are still valid when restarting the program and are used to regenerate the global pointers. The pdump_wired_list array is a special case. The variable it points to are the head of weak linked lists of lisp objects of the same type. Not all objects of this list are dumped so the relocated pointer we associate with them points to the first dumped object of the list, or Qnil if none is available. This is also the reason why they are not used as roots for the purpose of object enumeration. This is the end of the dumping part. 2.4. Reloading phase 2.4.1. File loading The file is mmap'ed in memory (which ensures a PAGESIZE alignment, at least 4096), or if mmap is unavailable or fails a 256-bytes aligned malloc is done and the file is loaded. Some variables are reinitialized from the values found in the header. The difference between the actual loading address and the reloc_address is computed and will be used for all the relocations. 2.4.2. Putting back the staticvec The staticvec array is memcpy'd from the file and the variables it points to are reset to the relocated objects adresses. 2.4.3. Putting back the dumpstructed variables The variables pointed to by dumpstruct in the dump phase are reset to the right relocated object addresses. 2.4.4. lrecord_implementations_table The lrecord_implementations_table is reset to its dump time state and the right lrecord_type_index values are put in. 2.4.5. Object relocation All the objects are relocated using their description are their offset by pdump_reloc_one. This step is unnecessary if the reloc_address is equal to the file loading address. 2.4.6. Puttin back the pdump_wire and pdump_wire_list variables Same as 2.4.3. 2.4.7. Reorganize the hash tables Since some of the hash values in the lisp hash tables are address-dependant, their layout is now wrong. So we go through each of them and have them resorted by calling reorganize_hash_table. 3. Remaining issues The build process will have to start a post-dump xemacs, ask it the loading address (which will, hopefully, be always the same between different xemacs invocations) and relocate the file to the new address. This way the object relocation phase will not have to be done, which means no writes in the objects and that, because of the use of mmap, the dumped data will be shared between all the xemacs running on the computer. Some executable signature will be necessary to ensure that a given dump file is really associated with a given executable, or random crashed will occur. Maybe a random number set at compile or configure time thru a define. This will also allow for having differently-compiled xemacsen on the same system (mule and no-mule comes to mind). The DOC file contents should probably end up in the dump file.