Unknown cmd fd(5)
13 years, 9 months
Andreas Goesele
Andreas Goesele
Hi.
When I start xemacs I get 20 times or so the following kernel messages:
Mar 24 15:56:32 computer kernel: [ 1565.560842] ioctl32(xemacs21-nomule:5715): Unknown cmd fd(5) cmd(0000530a){t:'S';sz:0} arg(ffd6b35c) on socket:[46842]
I use a 64 bit kernel but a 32 bit system, don't know whether that's
related. Also don't know, whether these messages are related to my
crashes cf. <878vwnx7b7.fsf(a)debian.IGP> and <87oc5c5bm4.fsf(a)debian.IGP>
--
Omnis enim res, quae dando non deficit, dum habetur et non datur,
nondum habetur, quomodo habenda est.
Augustinus, De doctrina christiana
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 2 participants
- 1 comments
Re: [Bug: 21.4.22] XEmacs crashes when trying to read news message (gnus)
13 years, 9 months
Adam Sjøgren
Adam Sjøgren
On Fri, 18 Mar 2011 15:11:42 +0100, Andreas wrote:
> I read the newsgroup, there the message is still available under the
> given ID. Under mid.gmane.org you can find it under
> 201103151352.18476.bss(a)iguanasuicide.net (But can you access the raw
> mail from there?)
Yes - by appending /raw to the URL:
* http://article.gmane.org/gmane.linux.debian.user/403780/raw
Best regards,
Adam
--
"Ge mig en vinterdrog, ge mig allt du har Adam Sjøgren
Kom nu jag är kroniskt låg, bara mörkret hörs" asjo(a)koldfront.dk
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 1 participants
- 0 comments
xemacs not starting correctly--half the window is blank.
13 years, 9 months
steven Mitchell
steven Mitchell
Hello,
I am running Slackware64 13.1 and XEmacs 21.4.22.
XEmacs was working just fine for months.
I installed E17 as the window manager instead of KDE 4.6.0.
All Xwindows apps work fine, but not XEmacs. Sigh.
A window comes up, has my XEmacs coloring and menus, but the right side
of the window is white, say 40% of screen width wide, and %100 high.
What is cut off is not the title bar (with minimize, maximize, and
close), but everything below it, the menu (no help button on right)
all text area, status bar at the bottom, and right end of minibuffer
is just white.
XEmacs seems to come up in two stages, a smaller window for a blink of
an eye, then the full size window. This might be because of the
set-frame-size command in my init.el to resize the window on startup:
(set-frame-size (window-frame) 140 80) ;--size window for 30" monitor.
If I execute the above command with larger or smaller values then
control-x control-e, The window narrows or widens, but the left hand
area that shows correctly does not change, just shows more or less of
the white area.
Grabbing the upper left corner with the mouse, I can resize the window
smaller or bigger and the symptom's remain the same. as the window gets
narrower, the white area shrinks, but resizing bigger restores the white
area.
However, when I grab the upper right corner to resize it, as soon as
I begin to resize the window, the white goes away and "help" on menu is
back and fullwidth status bar and minibuffer are back too. I just have
to move it a few pixels, too, and it fixes itself whether I go bigger
or smaller.
Is something not being updated on startup--that IS updated after a
resize? Can I workaround it by adding something to update the screen on
startup?
I installed 21.4.22 because I believed the warnings about 21.5 not being
stable yet, but came to understand that 21.4.22 code base is frozen, so
no non-serious bug fixes are made anymore. Does anyone know if
upgrading to the latest version would fix this problem? I installed
21.4.22 on all computers in my business thinking it was the latest
stable version, so it would be bit of work to upgrade them all (XP and
Slackware OS's) though I will, if someone is sure that would solve it.
Any ideas or things to try?
Steve Mitchell
PS I can take screenshots or a 10 second video to show this if someone
wants me too. It is repeatable every time.
Here is my init.el in it's entirety:
;--------------- SKM's init.el ----------------
;---- display extra items in status bar
(line-number-mode 1)
(column-number-mode 1)
(display-time)
;---- add recent files list to file menu
(load "recent-files")
(setq recent-files-menu-path '("File"))
(setq recent-files-add-menu-before "Exit XEmacs")
(recent-files-initialize)
;---- set printing to print in black and white
;(setq ps-default-fg nil)
;(setq ps-default-bg nil)
(setq ps-print-color-p nil)
(load-file "~/.xemacs/printer-setup.el")
;---- set window size for when program starts
(set-frame-size (window-frame) 140 80 )
;---- load file to get mouse scroll wheel working
(load-file "~/.xemacs/intellimouse.el")
;---- set path to where xemacs macros are stored
; typical for Linux systems: ~/xemacs_macros
; typical for Windows files: c:\xemacs_macros
(setq cnc-macro-path "~/xemacs_macros")
;---- load files for cnc macros that are in the menu
(load-file (concat cnc-macro-path "/swiss-print.el" ))
(load-file (concat cnc-macro-path "/refchart.el"))
(load-file (concat cnc-macro-path "/remove-spaces.el"))
(load-file (concat cnc-macro-path "/add-spaces.el"))
(load-file (concat cnc-macro-path "/removeCRCR.el"))
(load-file (concat cnc-macro-path "/cnc-mill-macro.el"))
(load-file (concat cnc-macro-path "/cnc-lathe-macro.el"))
;---- load CNC menu and put in menubar
(load-file (concat cnc-macro-path "/cncmenu.el"))
;---- set path for refchart's files
(setq cnc-refchart-path "~/xemacs_macros")
;---- define key to load cnc-mill-macro
(global-set-key [f12] 'cnc-mill-macro)
(global-set-key [f11] 'cnc-lathe-macro)
;----- set toolbar height for 64 pixel icons
;(set-specifier top-toolbar-height 72)
;----- turn off toolbar
(set-specifier top-toolbar-height (cons (selected-frame) 0))
;----- start up with a new buffer instead of scratch buffer
(switch-to-buffer (create-file-buffer "untitled.txt"))
;----- set some scrolling values
(setq
scroll-conservatively 10
scroll-step 2)
;(setq frame-title-format "%S: %f")
(load "big-menubar")
;----- set how many buffers are listed in buffer list
(setq buffers-menu-max-size 20)
;----- Add copy, paste, etc. to lisp-mode popup menu.
(setq emacs-lisp-mode-popup-menu
(cons "Emacs-Lisp"
(cons ["%_Undo" advertised-undo :active (and (not (eq
buffer-undo-list t)) (or buffer-undo-list pending-undo-list)) :suffix
(if (or (eq last-command (quote undo)) (eq last-command (quote
advertised-undo))) "More" "")]
(cons ["Cu%_t" kill-primary-selection :active (selection-owner-p)]
(cons ["%_Copy" copy-primary-selection :active (selection-owner-p)]
(cons ["%_Paste" yank-clipboard-selection :active
(selection-exists-p (quote CLIPBOARD))]
(cons ["%_Delete" delete-primary-selection :active
(selection-owner-p)]
(cons "---" (construct-lisp-mode-menu t t)))))))))
;---- define control-delete to delete current region
(global-set-key '(control delete) 'delete-primary-selection)
;---- define the left windows key and x to kill a line in Linux
(global-set-key '(super x) 'kill-entire-line)
;---- set size for file-open dialog on 30" monitor to see more files
(setq dialog-frame-plist (plist-put dialog-frame-plist 'width 120))
(setq dialog-frame-plist (plist-put dialog-frame-plist 'height 40))
;---- turn on complex buffer menu
(setq complex-buffers-menu-p t)
;---- load buffer colors menu
(load-file "~/xemacs_macros/buffer-colorize-menu.el")
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 1 participants
- 0 comments
vc-annotate and jump to a specific line.
13 years, 9 months
Uwe Brauer
Uwe Brauer
Hello
Lately I use vc-annotate quite often with RCS.
I would find it very useful if from the vc-annotate buffer I
could jump directly to a specific line of the file.
Example I execute vc-annotate in the workfile version and I
obtain
2011-03-22 1.11: \input{aned10-header-beamer}
2011-03-22 1.5 : %\input{aned10-header-article}
So putting to cursor to the second line I would like to jump
to the line in the corresponding file (which happens to be
line number two of the file.)
Anybody know about such a function?
Uwe Brauer
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 1 participants
- 0 comments
Summary of XEmacs Issue Tracking System Issues
13 years, 9 months
XEmacs Issue Tracking System
XEmacs Issue Tracking System
ACTIVITY SUMMARY (2011-03-15 - 2011-03-22)
XEmacs Issue Tracking System at http://tracker.xemacs.org/XEmacs/its/
To view or respond to any of the issues listed below, click on the issue
number. Do NOT respond to this message.
515 open ( +1) / 240 closed ( +0) / 755 total ( +1)
Open issues with patches: 11
Average duration of open issues: 810 days.
Median duration of open issues: 843 days.
Open Issues Breakdown
new 185 ( +1)
deferred 6 ( +0)
napping 4 ( +0)
verified 51 ( +0)
assigned 155 ( +0)
committed 25 ( +0)
documented 2 ( +0)
done/needs work 24 ( +0)
Issues Created Or Reopened (1)
______________________________
Implement `display-color-cells' for TTYs 2011-03-19
http://tracker.xemacs.org/XEmacs/its/issue757 created stephen
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 1 participants
- 0 comments
The automatic "commit" mails are not longer sent!?
13 years, 9 months
The XEmacs Package Smoketest
The XEmacs Package Smoketest
Hi,
The commit mails are not coming anymore. (Automatic mails sent from
mercurial on the commit. Subject line starts with "commit: ".) The
buildbot wants to have them. What is up?
Yours
--
%% Mats
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 2 participants
- 2 comments
Intermittent crash with slime
13 years, 9 months
Raymond Toy
Raymond Toy
Dear Bug Team!
I'm using a fairly recent version of xemacs from hg repo. This didn't
used to happen but it's happening once in a while. I'm not exactly
sure what I'm doing when it crashes, but slime is involved. I can't
reproduce it because I'm just using slime normally and some
combination of key presses ore something causes xemacs to crash.
Ray
Lisp backtrace follows:
Lisp backtrace follows:
# (unwind-protect ...)
remove*(remove* (#<buffer "*sldb cmulisp/1*"> #<buffer
"qd-elliptic.lisp"> #<buffer "*slime-repl cmulisp*"> #<buffer "
*Minibuf-0*"> #<buffer "qd.lisp"> #<buffer "qd-rep.lisp"> #<buffer
"qd-fun.lisp"> #<buffer "qd-complex.lisp"> #<buffer "rt-tests.lisp">
#<buffer "ellipt.lisp"> #<buffer "*xhg-status*"> #<buffer "minpack.asd">
#<buffer "f2cl1.l"> #<buffer "*scratch*"> #<buffer " *Echo Area*">
#<buffer " *pixmap conversion*"> #<buffer " *Message-Log*"> #<buffer
"*Compile-Log*"> #<buffer "*Compile-Log-Show*"> #<buffer "
*substitute*"> #<buffer " *balloon-help*"> #<buffer " *Gutter Area*">
#<buffer "*Completions*"> #<buffer " *xhg-process*"> #<buffer "
*xhg-errors*"> #<buffer " *dvc-log*"> #<buffer " *string-output*">
#<buffer " *string-output*<2>"> #<buffer "*slime-typeout*"> #<buffer "
*slime-fontify*"> #<buffer "*slime-compilation*"> #<buffer "
*string-output*<3>"> #<buffer " *string-output*<4>"> #<buffer "
*string-output*<5>"> #<buffer " *string-output*<6>"> #<buffer "
*string-output*<7>"> #<buffer " *string-output*<8>"> #<buffer "
*string-output*<9>"> #<buffer " *string-output*<10>"> #<buffer "
*string-output*<11>"> #<buffer " *string-output*<12>"> #<buffer "
*cl-connection*"> #<buffer "*inferior-lisp*">) :if-not (lambda (%buffer)
(with-current-buffer %buffer (funcall predicate))))
apply(remove* remove* (#<buffer "*sldb cmulisp/1*"> #<buffer
"qd-elliptic.lisp"> #<buffer "*slime-repl cmulisp*"> #<buffer "
*Minibuf-0*"> #<buffer "qd.lisp"> #<buffer "qd-rep.lisp"> #<buffer
"qd-fun.lisp"> #<buffer "qd-complex.lisp"> #<buffer "rt-tests.lisp">
#<buffer "ellipt.lisp"> #<buffer "*xhg-status*"> #<buffer "minpack.asd">
#<buffer "f2cl1.l"> #<buffer "*scratch*"> #<buffer " *Echo Area*">
#<buffer " *pixmap conversion*"> #<buffer " *Message-Log*"> #<buffer
"*Compile-Log*"> #<buffer "*Compile-Log-Show*"> #<buffer "
*substitute*"> #<buffer " *balloon-help*"> #<buffer " *Gutter Area*">
#<buffer "*Completions*"> #<buffer " *xhg-process*"> #<buffer "
*xhg-errors*"> #<buffer " *dvc-log*"> #<buffer " *string-output*">
#<buffer " *string-output*<2>"> #<buffer "*slime-typeout*"> #<buffer "
*slime-fontify*"> #<buffer "*slime-compilation*"> #<buffer "
*string-output*<3>"> #<buffer " *string-output*<4>"> #<buffer "
*string-output*<5>"> #<buffer " *string-output*<6>"> #<buffer "
*string-output*<7>"> #<buffer " *string-output*<8>"> #<buffer "
*string-output*<9>"> #<buffer " *string-output*<10>"> #<buffer "
*string-output*<11>"> #<buffer " *string-output*<12>"> #<buffer "
*cl-connection*"> #<buffer "*inferior-lisp*">) :if-not (lambda (%buffer)
(with-current-buffer %buffer (funcall predicate))) nil)
# bind (cl-keys cl-seq cl-predicate)
remove-if-not((lambda (%buffer) (with-current-buffer %buffer (funcall
predicate))) (#<buffer "*sldb cmulisp/1*"> #<buffer "qd-elliptic.lisp">
#<buffer "*slime-repl cmulisp*"> #<buffer " *Minibuf-0*"> #<buffer
"qd.lisp"> #<buffer "qd-rep.lisp"> #<buffer "qd-fun.lisp"> #<buffer
"qd-complex.lisp"> #<buffer "rt-tests.lisp"> #<buffer "ellipt.lisp">
#<buffer "*xhg-status*"> #<buffer "minpack.asd"> #<buffer "f2cl1.l">
#<buffer "*scratch*"> #<buffer " *Echo Area*"> #<buffer " *pixmap
conversion*"> #<buffer " *Message-Log*"> #<buffer "*Compile-Log*">
#<buffer "*Compile-Log-Show*"> #<buffer " *substitute*"> #<buffer "
*balloon-help*"> #<buffer " *Gutter Area*"> #<buffer "*Completions*">
#<buffer " *xhg-process*"> #<buffer " *xhg-errors*"> #<buffer "
*dvc-log*"> #<buffer " *string-output*"> #<buffer " *string-output*<2>">
#<buffer "*slime-typeout*"> #<buffer " *slime-fontify*"> #<buffer
"*slime-compilation*"> #<buffer " *string-output*<3>"> #<buffer "
*string-output*<4>"> #<buffer " *string-output*<5>"> #<buffer "
*string-output*<6>"> #<buffer " *string-output*<7>"> #<buffer "
*string-output*<8>"> #<buffer " *string-output*<9>"> #<buffer "
*string-output*<10>"> #<buffer " *string-output*<11>"> #<buffer "
*string-output*<12>"> #<buffer " *cl-connection*"> #<buffer
"*inferior-lisp*">))
# bind (predicate)
slime-filter-buffers((lambda nil (and (eq slime-buffer-connection
connection) (eq major-mode (quote sldb-mode)))))
(if connection (slime-filter-buffers (lambda nil (and (eq
slime-buffer-connection connection) (eq major-mode (quote sldb-mode)))))
(slime-filter-buffers (lambda nil (eq major-mode (quote sldb-mode)))))
# bind (connection)
sldb-buffers(#<network connection "SLIME Lisp" (50426 . "127.0.0.1")
state:exit>)
(length (sldb-buffers conn))
(let ((pending (length (slime-rex-continuations conn))) (sldbs (length
(sldb-buffers conn)))) (cond ((and (zerop sldbs) (zerop pending)) nil)
((zerop sldbs) (format " %s" pending)) (t (format " %s/%s" pending sldbs))))
(cond ((not (eq (process-status conn) (quote open))) (format " %s"
(process-status conn))) ((let ((pending (length (slime-rex-continuations
conn))) (sldbs (length (sldb-buffers conn)))) (cond ((and (zerop sldbs)
(zerop pending)) nil) ((zerop sldbs) (format " %s" pending)) (t (format
" %s/%s" pending sldbs))))))
# bind (conn)
slime-modeline-state-string(#<network connection "SLIME Lisp" (50426 .
"127.0.0.1") state:exit>)
(concat " " (if local "{" "[") (if pkg (slime-pretty-package-name pkg)
"?") " " (ignore-errors (slime-connection-name conn))
(slime-modeline-state-string conn) (if local "}" "]"))
# bind (pkg local)
(let ((local (eq conn slime-buffer-connection)) (pkg
(slime-current-package))) (concat " " (if local "{" "[") (if pkg
(slime-pretty-package-name pkg) "?") " " (ignore-errors
(slime-connection-name conn)) (slime-modeline-state-string conn) (if
local "}" "]")))
(if (not conn) (and slime-mode " Slime") (let ((local (eq conn
slime-buffer-connection)) (pkg (slime-current-package))) (concat " " (if
local "{" "[") (if pkg (slime-pretty-package-name pkg) "?") " "
(ignore-errors (slime-connection-name conn))
(slime-modeline-state-string conn) (if local "}" "]"))))
# bind (conn)
(let ((conn (slime-current-connection))) (if (not conn) (and
slime-mode " Slime") (let ((local (eq conn slime-buffer-connection))
(pkg (slime-current-package))) (concat " " (if local "{" "[") (if pkg
(slime-pretty-package-name pkg) "?") " " (ignore-errors
(slime-connection-name conn)) (slime-modeline-state-string conn) (if
local "}" "]")))))
slime-modeline-string()
(setq slime-modeline-string (slime-modeline-string))
(equal slime-modeline-string (setq slime-modeline-string
(slime-modeline-string)))
(not (equal slime-modeline-string (setq slime-modeline-string
(slime-modeline-string))))
(or (not (equal slime-modeline-string (setq slime-modeline-string
(slime-modeline-string)))) redraw-modeline)
(setq redraw-modeline (or (not (equal slime-modeline-string (setq
slime-modeline-string (slime-modeline-string)))) redraw-modeline))
# (unwind-protect ...)
(save-current-buffer (set-buffer object) (setq redraw-modeline (or
(not (equal slime-modeline-string (setq slime-modeline-string
(slime-modeline-string)))) redraw-modeline)))
(with-current-buffer object (setq redraw-modeline (or (not (equal
slime-modeline-string (setq slime-modeline-string
(slime-modeline-string)))) redraw-modeline)))
(if (or (symbol-value-in-buffer (quote slime-mode) object)
(symbol-value-in-buffer (quote slime-popup-buffer-mode) object))
(with-current-buffer object (setq redraw-modeline (or (not (equal
slime-modeline-string (setq slime-modeline-string
(slime-modeline-string)))) redraw-modeline))))
(when (or (symbol-value-in-buffer (quote slime-mode) object)
(symbol-value-in-buffer (quote slime-popup-buffer-mode) object))
(with-current-buffer object (setq redraw-modeline (or (not (equal
slime-modeline-string (setq slime-modeline-string
(slime-modeline-string)))) redraw-modeline))))
# bind (object)
(lambda (object) (setq object (window-buffer object)) (when (or
(symbol-value-in-buffer (quote slime-mode) object)
(symbol-value-in-buffer (quote slime-popup-buffer-mode) object))
(with-current-buffer object (setq redraw-modeline (or (not (equal
slime-modeline-string (setq slime-modeline-string
(slime-modeline-string)))) redraw-modeline)))))(#<window on
"qd-elliptic.lisp" 0x4e>)
# bind (walk-windows-current walk-windows-start arg which-devices
which-frames minibuf function)
walk-windows((lambda (object) (setq object (window-buffer object))
(when (or (symbol-value-in-buffer (quote slime-mode) object)
(symbol-value-in-buffer (quote slime-popup-buffer-mode) object))
(with-current-buffer object (setq redraw-modeline (or (not (equal
slime-modeline-string (setq slime-modeline-string
(slime-modeline-string)))) redraw-modeline))))) never visible)
# bind (redraw-modeline)
(let (redraw-modeline) (walk-windows (lambda (object) (setq object
(window-buffer object)) (when (or (symbol-value-in-buffer (quote
slime-mode) object) (symbol-value-in-buffer (quote
slime-popup-buffer-mode) object)) (with-current-buffer object (setq
redraw-modeline (or (not (equal slime-modeline-string (setq
slime-modeline-string (slime-modeline-string)))) redraw-modeline)))))
(quote never) (quote visible)) (and redraw-modeline (redraw-modeline t)))
slime-xemacs-recompute-modelines()
# (unwind-protect ...)
# (catch #<INTERNAL OBJECT (XEmacs bug?) (opaque, size=0) 0x0> ...)
# (unwind-protect ...)
# (unwind-protect ...)
# bind (inhibit-quit)
# (unwind-protect ...)
# (unwind-protect ...)
# bind (inhibit-quit)
(next-event "[internal]")
# (condition-case ... . error)
# (catch top-level ...)
================================================================
System Info to help track down your bug:
---------------------------------------
uname -a: Darwin gondor.local 10.6.0 Darwin Kernel Version 10.6.0: Wed
Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386 i386
../configure '--prefix=/Volumes/share2/darwin10.6'
'--with-xft=emacs,menubars' '--with-mule' 'CFLAGS=-I/opt/local/include'
'LDFLAGS=-L/opt/local/lib'
XEmacs 21.5-b29 "garbanzo" 5dd1ba5e0113 configured for
`i386-apple-darwin10.6.0'.
Compilation Environment and Installation Defaults:
Source code location:
/Volumes/share2/src/xemacs/hg/xemacs-21.5
Installation prefix: /Volumes/share2/darwin10.6
Not using any operating system description file
Not using any machine description file
Compiler version: i686-apple-darwin10-gcc-4.2.1 (GCC)
4.2.1 (Apple Inc. build 5664)
- GCC specs file: specs.
- Compiler command: gcc -Wall -Wno-switch -Wundef
-Wsign-compare -Wno-char-subscripts -Wpacked -Wpointer-arith -Wshadow
-Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes
-Wdeclaration-after-statement -Wunused-parameter -g -I/opt/local/include
libc version:
Relocating allocator for buffers: no
GNU version of malloc: no
- The GNU allocators don't work with this system configuration.
Window System:
Compiling in support for the X window system:
- X Windows headers location: /usr/X11/include
- X Windows libraries location: /opt/local/lib
- Handling WM_COMMAND properly.
- Using fontconfig to manage fonts.
- Compiling in support for Xft antialiased fonts (EXPERIMENTAL).
Compiling in support for the Athena widget set:
- Athena headers location: X11/Xaw
- Athena library to link: Xaw
Using Lucid menubars.
- Using Xft to render antialiased fonts in menubars.
WARNING: This Xft feature will be replaced with a face.
Using Lucid scrollbars.
Using Athena dialog boxes.
Using Athena native widgets.
TTY:
Compiling in support for ncurses.
Images:
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Sound:
Databases:
Compiling in support for Berkeley database.
Compiling in support for GNU DBM.
Compiling in support for LDAP.
Internationalization:
Compiling in support for Mule (multi-lingual Emacs).
Compiling in support for XIM (X11R5+ I18N input method).
- Using raw Xlib to provide XIM support.
Mail:
Compiling in support for "file" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for dynamic shared object modules.
Using the new GC mark algorithms (KKCC).
WARNING: ---------------------------------------------------------
WARNING: The new algorithms are experimental. They are enabled by
WARNING: default for this release. Use `--disable-kkcc' to
WARNING: turn it off.
WARNING: ---------------------------------------------------------
Using the new portable dumper.
Dumping into executable.
Compiling in support for extra debugging code.
Compiling in support for runtime error checking.
WARNING: ---------------------------------------------------------
WARNING: XEmacs will run noticeably more slowly as a result.
WARNING: Error checking is on by default for XEmacs beta releases.
WARNING: ---------------------------------------------------------
Load-Path Lisp Shadows:
----------------------
(/Volumes/share2/darwin10.6/share/maxima/5.23post/emacs/maxima
/Users/toy/.xemacs/site-packages/lisp/maxima
/Volumes/share2/darwin10.6/share/maxima/5.23post/emacs/maxima-font-lock
/Users/toy/.xemacs/site-packages/lisp/maxima-font-lock
/Volumes/share2/darwin10.6/share/maxima/5.23post/emacs/emaxima
/Users/toy/.xemacs/site-packages/lisp/emaxima
/Users/toy/.xemacs/site-packages/lisp/slime/contrib/bridge
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/ilisp/bridge
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/pcl-cvs
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/pcl-cvs
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/pcl-cvs-util
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/pcl-cvs-util
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/pcl-cvs-parse
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/pcl-cvs-parse
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/pcl-cvs-info
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/pcl-cvs-info
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/pcl-cvs-defs
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/pcl-cvs-defs
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/cvs-status
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/cvs-status
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/cvs-log
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/cvs-log
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/cvs-edit
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/cvs-edit
/Users/toy/.xemacs/site-packages/lisp/pcl-cvs/cvs-compat
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/pcl-cvs/cvs-compat
/Users/toy/.xemacs/site-packages/lisp/cl-indent
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/prog-modes/cl-indent
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/cedet-common/working
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/semantic/working
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/cedet-common/sformat
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/semantic/sformat
/Users/toy/.xemacs/site-packages/lisp/mercurial
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/vc/mercurial
/Users/toy/.xemacs/site-packages/lisp/eldoc
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/xemacs-devel/eldoc
/Volumes/share2/darwin10.6/share/xemacs/mule-packages/lisp/mule-base/viet-util
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/mule/viet-util
/Volumes/share2/darwin10.6/share/xemacs/mule-packages/lisp/mule-base/korea-util
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/mule/korea-util
/Volumes/share2/darwin10.6/share/xemacs/mule-packages/lisp/mule-base/japan-util
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/mule/japan-util
/Volumes/share2/darwin10.6/share/xemacs/mule-packages/lisp/mule-base/ethio-util
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/mule/ethio-util
/Volumes/share2/darwin10.6/share/xemacs/mule-packages/lisp/mule-base/china-util
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/mule/china-util
/Volumes/share2/darwin10.6/share/xemacs/mule-packages/lisp/mule-ucs/unicode
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/unicode
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/xemacs-base/regexp-opt
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/regexp-opt
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/xemacs-base/easy-mmode
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/easy-mmode
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/build/build-report
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/build-report
/Volumes/share2/darwin10.6/share/xemacs/xemacs-packages/lisp/apel/alist
/Volumes/share2/darwin10.6/share/xemacs-21.5-b29/lisp/alist)
Internationalization Settings:
-------------------------
Environment:
Value of LC_ALL : nil
Value of LC_COLLATE : nil
Value of LC_CTYPE : nil
Value of LC_MESSAGES : nil
Value of LC_MONETARY : nil
Value of LC_NUMERIC : nil
Value of LC_TIME : nil
Value of LANG : en_US.UTF-8
Lisp locale settings:
current-language-environment => "English (UTF-8)"
default-buffer-file-coding-system => utf-8
default-process-coding-system => (undecided . utf-8)
(current-locale) => "en_US.UTF-8"
keyboard-coding-system => utf-8
terminal-coding-system => utf-8
(coding-priority-list) =>
(utf-8 iso-8-1 utf-16-little-endian-bom utf-16-bom utf-8-bom iso-7
no-conversion iso-8-2 iso-8-designate iso-lock-shift shift-jis
big5 utf-16-little-endian utf-16 ucs-4)
Coding system aliases:
'native is aliased to utf-8
'file-name is aliased to utf-8
'mswindows-multibyte-system-default is not a coding system alias
Installed XEmacs Packages:
-------------------------
(zenirc ver: 1.16 upstream: 2.112)
(xwem ver: 1.23 upstream: lg(a)xwem.org--2005/xwem--main--2.1--versionfix-1)
(xslt-process ver: 1.12 upstream: 1.2.1)
(xslide ver: 1.09 upstream: 0.2.2)
(xlib ver: 1.14 upstream: lg(a)xwem.org--2005/xlib--main--2.1--version-0)
(xetla ver: 1.02 upstream: steve(a)eicq.org--2005/xetla--main--1.1--version-0)
(xemacs-devel ver: 1.8 upstream: No-Upstream-Ver)
(xemacs-base ver: 2.27 upstream: No-Upstream-Ver)
(x-symbol ver: 1.11 upstream: 4.5.1)
(w3 ver: 1.35 upstream: 4.0pre47)
(vm ver: 8.08 upstream: 8.0.12-devo)
(viper ver: 1.67 upstream: 3.09)
(view-process ver: 1.13 upstream: 2.4)
(vhdl ver: 1.22 upstream: 3.33.12)
(vc-cc ver: 1.22 upstream: No-Upstream-Ver)
(vc ver: 1.48 upstream: No-Upstream-Ver)
(tramp ver: 1.4 upstream: 2.0.56)
(tpu ver: 1.14 upstream: 4.2X)
(tooltalk ver: 1.15 upstream: No-Upstream-Ver)
(tm ver: 1.39 upstream: No-Upstream-Ver)
(time ver: 1.14 upstream: 1.17)
(textools ver: 1.15 upstream: No-Upstream-Ver)
(text-modes ver: 1.98 upstream: No-Upstream-Ver)
(texinfo ver: 1.3 upstream: No-Upstream-Ver)
(supercite ver: 1.21 upstream: 3.55x3)
(strokes ver: 1.1 upstream: No-Upstream-Ver)
(speedbar ver: 1.29 upstream: 1.0pre4)
(sounds-wav ver: 1.12 upstream: No-Upstream-Ver)
(sounds-au ver: 1.12 upstream: No-Upstream-Ver)
(sml-mode ver: 0.12 upstream: 3.9.5)
(slider ver: 1.16 upstream: 0.3x1)
(sieve ver: 1.18 upstream: No-Upstream-Ver)
(sh-script ver: 1.24 upstream: 2.0f)
(sgml ver: 1.11 upstream: No-Upstream-Ver)
(semantic ver: 1.21 upstream: 2.0pre4)
(scheme ver: 1.18 upstream: No-Upstream-Ver)
(sasl ver: 1.16 upstream: 1.14.4)
(ruby-modes ver: 1.04 upstream: 1.8.7)
(rmail ver: 1.14 upstream: No-Upstream-Ver)
(riece ver: 1.23 upstream: 3.1.2)
(reftex ver: 1.34 upstream: 4.21)
(re-builder ver: 1.05 upstream: 1.20)
(python-modes ver: 1.14 upstream: 5.0.0)
(psgml-dtds ver: 1.03 upstream: No-Upstream-Ver)
(psgml ver: 1.45 upstream: 1.3.2)
(ps-print ver: 1.12 upstream: 6.5.6)
(prog-modes ver: 2.2 upstream: No-Upstream-Ver)
(pgg ver: 1.07 upstream: 0.1)
(perl-modes ver: 1.14 upstream: No-Upstream-Ver)
(pcomplete ver: 1.06 upstream: 1.1.6)
(pcl-cvs ver: 1.7 upstream: R-2_9_9)
(pc ver: 1.28 upstream: No-Upstream-Ver)
(os-utils ver: 1.41 upstream: No-Upstream-Ver)
(oo-browser ver: 1.05 upstream: 4.08)
(ocaml ver: 0.06 upstream: 3.06)
(net-utils ver: 1.56 upstream: N/A)
(mmm-mode ver: 1.05 upstream: 0.4.8)
(misc-games ver: 1.22 upstream: No-Upstream-Ver)
(mine ver: 1.16 upstream: 1.9)
(mh-e ver: 1.32 upstream: 7.4.2)
(mew ver: 1.19 upstream: 1.94.2)
(mailcrypt ver: 2.14 upstream: 3.5.8)
(mail-lib ver: 1.8 upstream: No-Upstream-Ver)
(liece ver: 1.16 upstream: 1.4.9)
(jde ver: 1.52 upstream: 2.3.5.1)
(ispell ver: 1.32 upstream: 3.6)
(ilisp ver: 1.36 upstream: 5.12.0)
(igrep ver: 1.16 upstream: 2.111)
(idlwave ver: 1.32 upstream: 5.1)
(ibuffer ver: 1.1 upstream: No-Upstream-Ver)
(hyperbole ver: 1.17 upstream: 5.0)
(hm--html-menus ver: 1.24 upstream: 5.9)
(haskell-mode ver: 1.11 upstream: 2.1)
(guided-tour ver: 0.52 upstream: No-Upstream-Ver)
(gnus ver: 1.94 upstream: 5.10.8)
(gnats ver: 1.17 upstream: 3.101)
(general-docs ver: 1.06 upstream: No-Upstream-Ver)
(games ver: 1.2 upstream: 2.00)
(fsf-compat ver: 1.19 upstream: No-Upstream-Ver)
(frame-icon ver: 1.11 upstream: No-Upstream-Ver)
(fortran-modes ver: 1.05 upstream: No-Upstream-Ver)
(forms ver: 1.15 upstream: 2.37)
(footnote ver: 1.16 upstream: 0.18x)
(eudc ver: 1.4 upstream: 1.32)
(eterm ver: 1.18 upstream: No-Upstream-Ver)
(ess ver: 1.16 upstream: 5.2.7)
(eshell ver: 1.18 upstream: 0fc80a3f6bb3bb59f42e9ff83cc8b89bf90fe658)
(escreen ver: 1.01 upstream: 1.16)
(erc ver: 0.23 upstream: Version 5.1.2 Revision: 1.796.2.6)
(emerge ver: 1.11 upstream: No-Upstream-Ver)
(elib ver: 1.13 upstream: 1.0)
(eieio ver: 1.07 upstream: 1.0pre4)
(efs ver: 1.34 upstream: 1.24)
(edt ver: 1.14 upstream: No-Upstream-Ver)
(edit-utils ver: 2.43 upstream: No-Upstream-Ver)
(ediff ver: 1.81 upstream: 2.75)
(edebug ver: 1.22 upstream: No-Upstream-Ver)
(ede ver: 1.03 upstream: 1.0pre4)
(ecrypto ver: 0.21 upstream: 2.0)
(ecb ver: 1.22 upstream: 2.31)
(easypg ver: 1.03 upstream: 0.0.16)
(docbookide ver: 0.08 upstream: 0.1)
(dired ver: 1.2 upstream: 7.17)
(dictionary ver: 1.16 upstream: 1.8)
(debug ver: 1.18 upstream: No-Upstream-Ver)
(crisp ver: 1.15 upstream: 1.34)
(cookie ver: 1.15 upstream: No-Upstream-Ver)
(cogre ver: 1.02 upstream: 0.5)
(clearcase ver: 1.1 upstream: /main/laptop/165)
(cedet-common ver: 1.01 upstream: 1.0pre4)
(cc-mode ver: 1.45 upstream: 5.30.10)
(calendar ver: 1.38 upstream: No-Upstream-Ver)
(calc ver: 1.26 upstream: 2.02fX3)
(c-support ver: 1.22 upstream: No-Upstream-Ver)
(build ver: 1.15 upstream: 2.02)
(bbdb ver: 1.32 upstream: 2.35)
(auctex ver: 1.49 upstream: 11.55)
(apel ver: 1.34 upstream: 10.7)
(ada ver: 1.14 upstream: 2.27)
(Sun ver: 1.16 upstream: No-Upstream-Ver)
(skk ver: 1.24 upstream: 10.62a)
(mule-ucs ver: 1.18 upstream: 0.84)
(mule-base ver: 1.56 upstream: No-Upstream-Ver)
(lookup ver: 1.15 upstream: 1.0)
(locale ver: 1.28 upstream: No-Upstream-Ver)
(leim ver: 1.31 upstream: No-Upstream-Ver)
(latin-unity ver: 1.2 upstream: 1.20)
(latin-euro-standards ver: 1.09 upstream: 1.09)
(egg-its ver: 1.27 upstream: No-Upstream-Ver)
(edict ver: 1.17 upstream: 0.9.9)
Installed Modules:
-----------------
Features:
--------
(xemacsbug shadow sort gnus-cite smiley annotations flow-fill
mail-extr gnus-bcklg gnus-async gnus-ml disp-table nnfolder parse-time
nnagent starttls nnimap pop3 utf7 passwd imap nnml nndraft nnmh efs-cu
gnus-agent gnus-srvr gnus-score score-mode nnvirtual gnus-msg gnus-art
mm-uu mml2015 pgg password pgg-parse pgg-def mm-view gnus-sum
gnus-group gnus-undo nntp nnoo nnmail mail-source format-spec
gnus-cache gnus-start gnus-spec gnus-int gnus-range message mml
mml-sec mml-smime smime dig mm-decode mm-bodies mm-encode mailcap lpr
mail-parse rfc2045 rfc2231 rfc2047 qp ietf-drums mail-abbrevs sendmail
rfc822 mailheader canlock sha1 executable hex-util gnus-win gnus
gnus-ems gnus-xmas messagexmas nnheader nnheaderxm gnus-util netrc
time-date mail-utils mm-util mail-prsvr guided-tour balloon-help paren
blink-paren gnuserv git log-edit pcl-cvs-util cvs-compat dired-faces
dired-xemacs dired add-log dvc-autoloads dvc-core dvc-lisp dvc-buffers
dvc-ui dvc-register dvc-utils dvc-xemacs wid-edit ewoc dvc-defs
dvc-site func-menu whitespace mwheel scroll-in-place
slime-typeout-frame slime-fancy slime-fontifying-fu slime-package-fu
slime-references slime-scratch slime-presentations slime-fuzzy
slime-fancy-inspector slime-c-p-c slime-editing-commands slime-autodoc
slime-parse slime-repl slime byte-optimize bytecomp byte-compile
regexp-opt apropos edmacro overlay font-lock hideshow pp timer comint
hyperspec thingatpt browse-url facemenu vc ring vc-hooks vc-xemacs
advice advice-preload uniquify filladapt tex-site time cus-face
zenirc-autoloads xwem-autoloads xslt-process-autoloads
xslide-autoloads xlib-autoloads xetla-autoloads xemacs-devel-autoloads
xemacs-base-autoloads x-symbol-autoloads w3-autoloads vm-autoloads
viper-autoloads view-process-autoloads vhdl-autoloads vc-cc-autoloads
vc-autoloads tramp-autoloads tpu-autoloads tooltalk-autoloads
tm-autoloads time-autoloads textools-autoloads text-modes-autoloads
texinfo-autoloads supercite-autoloads strokes-autoloads
speedbar-autoloads sounds-wav-autoloads sounds-au-autoloads
sml-mode-autoloads slider-autoloads sieve-autoloads
sh-script-autoloads sgml-autoloads semantic-autoloads scheme-autoloads
sasl-autoloads ruby-modes-autoloads rmail-autoloads riece-autoloads
reftex-autoloads re-builder-autoloads python-modes-autoloads
psgml-dtds-autoloads psgml-autoloads ps-print-autoloads
prog-modes-autoloads pgg-autoloads perl-modes-autoloads
pcomplete-autoloads pcl-cvs-autoloads pc-autoloads os-utils-autoloads
oo-browser-autoloads ocaml-autoloads net-utils-autoloads
mmm-mode-autoloads misc-games-autoloads mine-autoloads mh-e-autoloads
mew-autoloads mailcrypt-autoloads mail-lib-autoloads liece-autoloads
jde-autoloads ispell-autoloads ilisp-autoloads igrep-autoloads
idlwave-autoloads ibuffer-autoloads hyperbole-autoloads
hm--html-menus-autoloads haskell-mode-autoloads guided-tour-autoloads
gnus-autoloads gnats-autoloads general-docs-autoloads games-autoloads
fsf-compat-autoloads frame-icon-autoloads fortran-modes-autoloads
forms-autoloads footnote-autoloads eudc-autoloads eterm-autoloads
ess-autoloads eshell-autoloads escreen-autoloads erc-autoloads
emerge-autoloads elib-autoloads eieio-autoloads efs-autoloads
edt-autoloads edit-utils-autoloads ediff-autoloads edebug-autoloads
ede-autoloads ecrypto-autoloads ecb-autoloads easypg-autoloads
docbookide-autoloads dired-autoloads dictionary-autoloads
debug-autoloads crisp-autoloads cookie-autoloads cogre-autoloads
clearcase-autoloads cedet-common-autoloads cc-mode-autoloads
calendar-autoloads calc-autoloads c-support-autoloads build-autoloads
bbdb-autoloads auctex-autoloads apel-autoloads ada-autoloads
Sun-autoloads skk-autoloads mule-ucs-autoloads mule-base-autoloads
lookup-autoloads locale-autoloads leim-autoloads latin-unity-autoloads
latin-euro-standards-autoloads egg-its-autoloads edict-autoloads
modules-autoloads mule-autoloads auto-autoloads auto-show fontl-hooks
canna-leim tibetan slovenian czech romanian lao devanagari indian
cyrillic code-cmds gutter-items menubar-items x-menubar mode-motion
mouse behavior itimer auto-save lisp-mode easymenu easy-mmode
iso8859-1 page buff-menu lib-complete loadhist cus-file derived
newcomment rsz-minibuf env text-props fontconfig frame obsolete
packages cus-start widget custom cl-extra cl cl-19 backquote unicode
font-mgr lucid-scrollbars cut-buffer xft-fonts lucid-menubars
athena-dialogs x c-balloon-help tty-frames tty toolbar scrollbar
unix-processes multicast network-streams subprocesses modules
menu-accelerator-support menubar berkeley-db dbm md5 xemacs xim mule
gutter tiff png jpeg xpm xbm lisp-float-type file-coding darwin dialog
devices debug-xemacs window-system base64)
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 2 participants
- 2 comments
Re: HG help please
13 years, 9 months
Michael Sperber
Michael Sperber
Didier Verna <didier(a)xemacs.org> writes:
> I wrote:
>
>> Is there a way to tell HG *not* to push closed branches, or even
>> better, how can I simply eradicate the old branch from my repo ?
>
> hg strip is the answer to question #2. Question #1 holds though.
hg push -rtip
ought to do the job. ("push" and "pull" are operations on (entire)
repositories - they have nothing to do with the state of the working
directory.)
--
Cheers =8-} Mike
Friede, Völkerverständigung und überhaupt blabla
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 1 participants
- 0 comments
XEmacs 21.4.22 SEGV after temacs dump on AIX OS
13 years, 9 months
Mark Oberfield
Mark Oberfield
Hi,
After consulting the XEmacs INSTALL and PROBLEM files, I am unable to
proceed with building XEmacs on an AIX machine.
My ulimits:
% ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) 4000000
stack(kbytes) 4000000
memory(kbytes) 4000000
coredump(blocks) 100000
nofiles(descriptors) unlimited
% uname -a
AIX c2n6 3 5 00C885E24C00 powerpc unknown AIX
I've recompiled XEmacs code with the following settings/flags in an attempt
to get more information:
CC=xlc_r
./configure --with-gcc=no --error-checking=all --debug=yes
After make halts again attempting to do "Testing for Lisp shadows ..." I
manually recreated the xemacs executable so
that I can run the debugger.
% ./temacs -nd -batch -l ../lisp/loadup.el dump
and re-ran the command that caused the SEGV
% xemacs -batch -vanilla -f list-load-path-shadows
Segmentation fault (core dumped)
Exit 139
dbx xemacs core
Type 'help' for help.
warning: The core file is not a fullcore. Some info may
not be available.
[using memory image in core]
reading symbolic information ...
Segmentation fault in . at 0x2020200
0x02020200 warning: Unable to access address 0x2020200 from core
0x20... are space characters which suggests a bad pointer. This is all I
have.
The core file is extremely small ('not a fullcore')
% ls -la src/core
-rw-rw-r-- 1 we24uf g06 7984 Mar 16 16:00 src/core
In fact, just invoking 'xemacs' without arguments is sufficient for a SEGV
to be
generated.
I ran temacs autotest feature... it didn't blow up. Most tests completed
okay or were skipped.
My google-fu didn't find anything particularly applicable to this
situation. Does anyone have any suggestions for me to try to get more
information as to what might be wrong or get me past this hurdle?
Thanks!
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 3 participants
- 3 comments
[AC21.5] Improve support for req min-colors in defface
13 years, 9 months
Stephen J. Turnbull
Stephen J. Turnbull
APPROVE COMMIT 21.5
Note: Reply-To set to xemacs-beta.
Jeff Sparkes' commit
changeset: 5373:b6e59ea11533
user: Jeff Sparkes <jsparkes(a)gmail.com>
date: Thu Mar 17 14:35:02 2011 -0400
summary: Add min-colors specifier to defface, and document it.
breaks initialization on TTYs (eg, xemacs -nw) because
`display-color-cells' currently returns nil on TTYs (cf issue757 on
the tracker), and code in faces.el expects that to return an integer.
This doesn't quite break the build, but it isn't debuggable via
-debug-init and AFAICS there is no workaround, so I'm going to go
ahead and commit.
The workaround I've employed is to assume that a display that returns
nil is monochrome, and thus display-color-cells is 2. I've made the
change in faces.el rather than in display-color-cells.
Please advise me on whether the change should be made in
display-color-cells instead. I'm of two minds; if there is no
information on visual depth, returning nil allows higher-level code to
make its own assumptions for that case. On the other hand, the API is
simpler if it always returns an integer, and user code can always
override (although that's kind of unclean).
This change also adds a new node to customize.texi documenting
`defface' and clarifies some documentation in the Faces node of
faces.texi. The new code builds without errors and XEmacs starts
correctly, on Gentoo Linux.
2011-03-19 Stephen J. Turnbull <stephen(a)xemacs.org>
* faces.el (face-spec-set-match-display):
Protect against `display-color-cells' returning nil.
Delete unreferenced let-binding of `min-colors'.
2011-03-19 Stephen J. Turnbull <stephen(a)xemacs.org>
* lispref/customize.texi (Face Definitions): New node.
(Customization): Add entry to menu.
(Variable Definitions): Add cross-ref for `defface'.
(Customization Types): Fixup Previous link.
* lispref/faces.texi (Faces):
Clarify that built-in properties of faces are computed at runtime.
diff -r eac2e6bd5b2c lisp/ChangeLog
--- a/lisp/ChangeLog Thu Mar 17 21:50:34 2011 +0000
+++ b/lisp/ChangeLog Sat Mar 19 21:55:48 2011 +0900
＠＠ -1,3 +1,9 ＠＠
+2011-03-19 Stephen J. Turnbull <stephen(a)xemacs.org>
+
+ * faces.el (face-spec-set-match-display):
+ Protect against `display-color-cells' returning nil.
+ Delete unreferenced let-binding of `min-colors'.
+
2011-03-17 Aidan Kehoe <kehoea(a)parhasard.net>
* bytecomp.el (byte-compile-catch):
diff -r eac2e6bd5b2c lisp/faces.el
--- a/lisp/faces.el Thu Mar 17 21:50:34 2011 +0000
+++ b/lisp/faces.el Sat Mar 19 21:55:48 2011 +0900
＠＠ -1702,7 +1702,6 ＠＠
(type (plist-get props 'type))
(class (plist-get props 'class))
(background (plist-get props 'background))
- (min-colors (plist-get props 'min-colors))
(match t)
(entries display)
entry req options)
＠＠ -1715,7 +1714,9 ＠＠
(type (memq type options))
(class (memq class options))
(background (memq background options))
- (min-colors (>= (display-color-cells frame)
+ ;; `display-color-cells' can return nil (eg, TTYs).
+ ;; If so, assume monochrome.
+ (min-colors (>= (or (display-color-cells frame) 2)
(car options)))
(t (warn "Unknown req `%S' with options `%S'"
req options)
diff -r eac2e6bd5b2c man/ChangeLog
--- a/man/ChangeLog Thu Mar 17 21:50:34 2011 +0000
+++ b/man/ChangeLog Sat Mar 19 21:55:48 2011 +0900
＠＠ -1,3 +1,13 ＠＠
+2011-03-19 Stephen J. Turnbull <stephen(a)xemacs.org>
+
+ * lispref/customize.texi (Face Definitions): New node.
+ (Customization): Add entry to menu.
+ (Variable Definitions): Add cross-ref for `defface'.
+ (Customization Types): Fixup Previous link.
+
+ * lispref/faces.texi (Faces):
+ Clarify that built-in properties of faces are computed at runtime.
+
2011-03-15 Aidan Kehoe <kehoea(a)parhasard.net>
* lispref/objects.texi (Character Type):
diff -r eac2e6bd5b2c man/lispref/customize.texi
--- a/man/lispref/customize.texi Thu Mar 17 21:50:34 2011 +0000
+++ b/man/lispref/customize.texi Sat Mar 19 21:55:48 2011 +0900
＠＠ -15,6 +15,7 ＠＠
* Common Keywords::
* Group Definitions::
* Variable Definitions::
+* Face Definitions::
* Customization Types::
* Enabling Behavior::
＠end menu
＠＠ -163,6 +164,7 ＠＠
＠section Defining Customization Variables
Use ＠code{defcustom} to declare user-editable variables.
+For face declarations, use ＠code{defface} instead. ＠xref{Face Definitions}.
＠tindex defcustom
＠defmac defcustom option default doc [keyword value]...
＠＠ -288,7 +290,67 ＠＠
customization buffer. The ＠code{saved-value} property is actually a
list whose car is an expression which evaluates to the value.
-＠node Customization Types, Enabling Behavior, Variable Definitions, Customization
+＠node Face Definitions, Customization Types, Variable Definitions, Customization
+＠section Face Definitions
+
+Use ＠code{defface} to declare a new face. Conventions used in
+specifying properties are similar to those for general customizable
+variables. ＠xref{Variable Definitions}.
+
+＠defun defface face spec doc &rest args
+
+Declare ＠var{face} as a customizable face that defaults to ＠var{spec}.
+＠var{face} does not need to be quoted.
+
+Third argument ＠var{doc} is the face documentation.
+
+If ＠var{face} has been set with `custom-set-face', set the face attributes
+as specified by that function, otherwise set the face attributes
+according to ＠var{spec}.
+
+The remaining arguments ＠var{args} are a property list, which has the
+form
+
+ ＠var{keyword} ＠var{value}...
+
+The following ＠var{keyword}s are defined:
+
+＠table ＠code
+＠item:group
+＠var{value} is a customization group. Add ＠var{face} to that group.
+＠end table
+
+＠var{spec} is an alist of the form ((＠var{display} ＠var{atts})...).
+
+＠var{atts} is a list of face attributes and their values. The possible
+attributes are defined in the variable `custom-face-attributes'.
+
+The ＠var{atts} of the first entry in ＠var{spec} where the
+＠var{display} matches the frame take effect in that frame.
+＠var{display} can either be the symbol t, which will match all frames,
+or an alist of the form \((＠var{req} ＠var{item}...)...)
+
+For ＠var{display} to match a frame, the ＠var{req} property of the
+frame must match one of the ＠var{item}. The following ＠var{req} are
+defined:
+
+＠table ＠code
+＠item ＠code{type} (the value of ＠code{window-system})
+ Should be one of ＠code{x}, ＠code{mswindows}, or ＠code{tty}.
+
+＠code{class} (the frame's color support)
+ Should be one of ＠code{color}, ＠code{grayscale}, or ＠code{mono}.
+
+＠code{min-colors} (the minimum number of colors the frame supports)
+ Should be in integer which is compared to ＠code{display-color-cells}
+
+＠code{background} (what color is used for the background text)
+ Should be one of ＠code{light} or ＠code{dark}.
+＠end table
+＠end defun
+
+
+＠node Customization Types, Enabling Behavior, Face Definitions, Customization
＠section Customization Types
When you define a user option with ＠code{defcustom}, you must specify
diff -r eac2e6bd5b2c man/lispref/faces.texi
--- a/man/lispref/faces.texi Thu Mar 17 21:50:34 2011 +0000
+++ b/man/lispref/faces.texi Sat Mar 19 21:55:48 2011 +0900
＠＠ -26,10 +26,13 ＠＠
Each built-in property of a face is controlled using a specifier,
which allows it to have separate values in particular buffers, frames,
-windows, and devices and to further vary according to device type
-(X or TTY), device class (color, mono, or grayscale) and number of
-displayable colors (min-colors).
-＠xref{Specifiers}, for more information.
+windows, and devices. These properties are computed when the face is
+instantiated, allowing them to vary according to properties of the
+display device, such as type (X or TTY), visual class (color, mono, or
+grayscale), and number of colors displayable on the device.
+＠xref{Specifiers}, for more information on specifiers.
+＠xref{Face Definitions}, for defining faces whose properties vary
+according to their runtime environments.
The face named ＠code{default} is used for ordinary text. The face named
＠code{modeline} is used for displaying the modeline. The face named
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://lists.xemacs.org/mailman/listinfo/xemacs-beta
- 2 participants
- 1 comments