February 2008 - XEmacs-Beta - XEmacs Mailing List Archives

RE: [issue] Crash at startup 16 years, 10 months

Stephen J. Turnbull

jean-louis.a.leroy(a)fortis.com writes: > I have run xemacs under truss, hoping to find the location of the > core file, without success. I have re-read `man core`, still no > clue. But I'll ask a sysadmin. > > I have found a 32 bit gdb and here's the stack trace and register dump: > > (gdb) bt > #0 0x00000000 in ?? () > #1 0xfef620fc in XRegisterIMInstantiateCallback () from /usr/lib/libX11.so.4 To work around the crash, try configuring and building with --with-xim=no. To help us debug, build XEmacs with CFLAGS="-g -O2" in the environment and see if you can still get the crash. This ways, we should be able to oberve the values of the arguments to the various functions. If so, please post the traceback, again. The registers are not very helpful to me, as I know little about the Sun architecture. _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

2 participants
1 comments

show-wspace.el fontlock problem 16 years, 10 months

Neal Becker

I'm trying out show-wspace.el: http://www.emacswiki.org/cgi-bin/wiki/show-wspace.el Sort of works, but I'm getting millions of messages: Fontifying region...(invalid-function 0) Strangely, setting debug-on-error doesn't seem to trap the message. I'm thinking this should be simple to debug. At the end of show-wspace.el there are several font-lock-add-keywords that I was thinking might be the cause, but I don't see it (I'm just going from the font-lock-add-keywords doc, I don't have any experience with this). _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

4 participants
7 comments

Crash at startup 16 years, 10 months

jean-louis.a.leroy＠fortis.com

Hello. Xemacs crashes on me at startup: x54209:stas0006>ulimit -c unlimited x54209:stas0006>xemacs Fatal error (11). Your files have been auto-saved. Use `M-x recover-session' to recover them. Your version of XEmacs was distributed with a PROBLEMS file that may describe your crash, and with luck a workaround. Please check it first, but do report the crash anyway. Please report this bug by invoking M-x report-emacs-bug, or by selecting `Send Bug Report' from the Help menu. If necessary, send ordinary email to `xemacs-beta(a)xemacs.org'. *MAKE SURE* to include the XEmacs configuration from M-x describe-installation, or equivalently the file Installation in the top of the build tree. *Please* try *hard* to obtain a C stack backtrace; without it, we are unlikely to be able to analyze the problem. Locate the core file produced as a result of this crash (often called `core' or `core.<process-id>', and located in the directory in which you started XEmacs or your home directory), and type gdb /home/users/x54209/bin/xemacs core then type `where' at the debugger prompt. No GDB on your system? You may have DBX, or XDB, or SDB. (Ask your system administrator if you need help.) If no core file was produced, enable them (often with `ulimit -c unlimited' in case of future recurrance of the crash. Lisp backtrace follows: # (unwind-protect ...) make-device(x nil) # bind (display) make-x-device(nil) init-x-win() # bind (debugger debug-on-error command-line-args-left) command-line() # (condition-case ... . ((t (byte-code " Â§" ... 1)))) # bind (error-data) normal-top-level() # (condition-case ... . error) # (catch top-level ...) Segmentation Fault (core dumped) No core is produced though: x54209:stas0006>ls -l core ls: cannot access core: No such file or directory Here's the Xemacs version: x54209:stas0006>xemacs -nw --version XEmacs 21.4 (patch 21) "Educational Television" [Lucid] (sparc-sun-solaris2.10, Mule) of Thu Feb 21 2008 on stas0006 Oh btw `xemacs -nw` appears to work flawlessly. X server is WRQ Reflection X 12.0.0 running on Windows XP Professional Version 2002 with Service Pack 2. All other X clients I have tried work without problem. Here's how I built my Xemacs: ./configure --with-mule --prefix ~ --pdump make make install Here's my OS version: x54209:stas0006>uname -a SunOS stas0006 5.10 Generic_118833-24 sun4v sparc SUNW,Sun-Fire-T200 Solaris Cordially, Jean-Louis = = = = = = = = = = = = = = = = = = = = = = = = = Fortis disclaimer : http://www.fortis.be/legal/disclaimer.htm Privacy policy related to banking activities of Fortis: http://www.fortis.be/legal/privacy_policy.htm = = = = = = = = = = = = = = = = = = = = = = = = = _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

2 participants
3 comments

[Bug: 21.5-b28] sh-script: no DEFUN for sh-beginning-of-compound-command? 16 years, 10 months

FKtPp

================================================================ Dear Bug Team! In sh-script.el line:500, there's a symbol named sh-beginning-of-compound-command. But I can't find it's definiation Is this a bug of sh-script mode? ================================================================ System Info to help track down your bug: --------------------------------------- OS version: Microsoft Windows XP [Version 5.1.2600] OS: Windows_NT XEmacs 21.5-b28 "fuki" (+CVS-20071205) configured for `i586-pc-win32'. Building XEmacs using "nmake". Building XEmacs using make flags " ". Building XEmacs in source tree "c:\\XEmacsBuild\\xemacs-21.5-2008-01-24". For src, using compiler "cl -nologo -W3 -DSTRICT -Zi -Od -MD -c -TP -Ic:\XEmacsBuild\xemacs-21.5-2008-01-24\nt\inc -Ic:\XEmacsBuild\xemacs-21.5-2008-01-24\src -I"e:/cygwin/usr/local/src\xpm-3.4k" -I"e:/cygwin/usr/local/src\xpm-3.4k\lib" -I"e:/cygwin/usr/local/src\libpng-1.2.8" -I"e:/cygwin/usr/local/src/zlib" -I"e:/cygwin/usr/local/src/tiff-3.7.3\libtiff" -I"e:/cygwin/usr/local/src\jpeg-6b" -I"e:/cygwin/usr/local/src/zlib" -DHAVE_MS_WINDOWS -DHAVE_MENUBARS -DHAVE_SCROLLBARS -DHAVE_TOOLBARS -DHAVE_WIDGETS -DHAVE_DIALOGS -DHAVE_XPM -DFOR_MSW -DHAVE_GIF -DHAVE_PNG -DHAVE_TIFF -DHAVE_JPEG -DHAVE_ZLIB -DHAVE_NATIVE_SOUND -DMULE -DERROR_CHECK_ALL -DPDUMP -DUSE_KKCC -DSYSTEM_MALLOC -DDEBUG_XEMACS -D_DEBUG -DWIN32_LEAN_AND_MEAN -DWIN32_NATIVE -Demacs -DHAVE_CONFIG_H -DPATH_VERSION=\"21.5-b28\" -DPATH_PROGNAME=\"xemacs\" -DEMACS_VERSION=\"21.5-b28\" -DEMACS_PROGNAME=\"xemacs\" -DSTACK_TRACE_EYE_CATCHER=xemacs_21_5_b28_i586_pc_win32 -DPATH_PREFIX=\"..\" -DEMACS_MAJOR_VERSION=21 -DEMACS_MINOR_VERSION=5 -DEMACS_BETA_VERSION=28 -DXEMACS_CODENAME=\""fuki"\" -DXEMACS_EXTRA_NAME=\"(+CVS-20071205)\" -DEMACS_CONFIGURATION=\"i586-pc-win32\"". For lib-src, using compiler "cl -nologo -W3 -DSTRICT -Zi -Od -MD -Ic:\XEmacsBuild\xemacs-21.5-2008-01-24\lib-src -Ic:\XEmacsBuild\xemacs-21.5-2008-01-24\src -DHAVE_CONFIG_H -DWIN32_NATIVE". Compiling as C++. Installing XEmacs in "c:/XEmacsBuild/installed/2008-01-24/XEmacs-21.5-b28". Compiling in support for Microsoft Windows native GUI. Compiling in international (MULE) support. Compiling in support for XPM images. Compiling in support for GIF images. Compiling in support for PNG images. Compiling in support for TIFF images. Compiling in support for JPEG images. Compiling in support for GZIP compression/decompression. Compiling in support for toolbars. Compiling in support for dialogs. Compiling in support for widgets. Compiling in support for native sounds. Using portable dumper. Using system malloc. Using DLL version of C runtime library. Compiling in extra internal error-checking. NOTE: --------------------------------------------------------- NOTE: Compiling in support for runtime error-checking. NOTE: XEmacs will run noticeably more slowly as a result. NOTE: Error-checking is on by default for XEmacs beta releases. NOTE: --------------------------------------------------------- Compiling in debugging support (no slowdown). Using new experimental GC mark algorithms. Load-Path Lisp Shadows: ---------------------- (d:\usr\XEmacs\mule-packages\lisp\mule-base\viet-util d:\usr\XEmacs\XEmacs-21.5-b28\lisp\mule\viet-util d:\usr\XEmacs\mule-packages\lisp\mule-base\korea-util d:\usr\XEmacs\XEmacs-21.5-b28\lisp\mule\korea-util d:\usr\XEmacs\mule-packages\lisp\mule-base\japan-util d:\usr\XEmacs\XEmacs-21.5-b28\lisp\mule\japan-util d:\usr\XEmacs\mule-packages\lisp\mule-base\ethio-util d:\usr\XEmacs\XEmacs-21.5-b28\lisp\mule\ethio-util d:\usr\XEmacs\mule-packages\lisp\mule-base\cyril-util d:\usr\XEmacs\XEmacs-21.5-b28\lisp\mule\cyril-util d:\usr\XEmacs\mule-packages\lisp\mule-base\china-util d:\usr\XEmacs\XEmacs-21.5-b28\lisp\mule\china-util d:\usr\XEmacs\xemacs-packages\lisp\xemacs-base\regexp-opt d:\usr\XEmacs\XEmacs-21.5-b28\lisp\regexp-opt d:\usr\XEmacs\xemacs-packages\lisp\xemacs-base\easy-mmode d:\usr\XEmacs\XEmacs-21.5-b28\lisp\easy-mmode) Internationalization Settings: ------------------------- Environment: Value of LC_ALL : nil Value of LC_COLLATE : nil Value of LC_CTYPE : nil Value of LC_MESSAGES : nil Value of LC_MONETARY : nil Value of LC_NUMERIC : nil Value of LC_TIME : nil Value of LANG : nil Lisp locale settings: current-language-environment => "English" default-buffer-file-coding-system => mswindows-multibyte-dos default-process-coding-system => (undecided . mswindows-multibyte-system-default) (current-locale) => "English_United States.1252" keyboard-coding-system => mswindows-multibyte-system-default terminal-coding-system => mswindows-multibyte-system-default (coding-priority-list) => (iso-8-1 utf-16-little-endian-bom utf-16-bom utf-8-bom iso-7 no-conversion utf-8 iso-8-2 iso-8-designate iso-lock-shift shift-jis big5 utf-16-little-endian utf-16 ucs-4) Coding system aliases: 'native is aliased to mswindows-multibyte-system-default-dos 'file-name is aliased to native 'mswindows-multibyte-system-default is not a coding system alias Installed XEmacs Packages: ------------------------- (xemacs-devel ver: 1.77 upstream: No-Upstream-Ver) (xemacs-base ver: 2.15 upstream: No-Upstream-Ver) (vc ver: 1.45 upstream: No-Upstream-Ver) (tramp ver: 1.4 upstream: 2.0.56) (time ver: 1.14 upstream: 1.17) (text-modes ver: 1.95 upstream: No-Upstream-Ver) (texinfo ver: 1.3 upstream: No-Upstream-Ver) (supercite ver: 1.21 upstream: 3.55x3) (sounds-wav ver: 1.12 upstream: No-Upstream-Ver) (sh-script ver: 1.23 upstream: 2.0f) (semantic ver: 1.2 upstream: 1.4.4) (ruby-modes ver: 1.02 upstream: 1.6.8) (python-modes ver: 1.1 upstream: 426) (psgml ver: 1.45 upstream: 1.3.2) (prog-modes ver: 2.16 upstream: No-Upstream-Ver) (perl-modes ver: 1.11 upstream: No-Upstream-Ver) (pcomplete ver: 1.04 upstream: 1.1.6) (pcl-cvs ver: 1.68 upstream: R-2_9_9) (pc ver: 1.28 upstream: No-Upstream-Ver) (os-utils ver: 1.4 upstream: No-Upstream-Ver) (net-utils ver: 1.54 upstream: N/A) (mailcrypt ver: 2.14 upstream: 3.5.8) (mail-lib ver: 1.79 upstream: No-Upstream-Ver) (ispell ver: 1.32 upstream: 3.6) (ibuffer ver: 1.09 upstream: No-Upstream-Ver) (gnus ver: 1.92 upstream: 5.10.8) (fsf-compat ver: 1.16 upstream: No-Upstream-Ver) (footnote ver: 1.16 upstream: 0.18x) (eterm ver: 1.17 upstream: No-Upstream-Ver) (eshell ver: 1.12 upstream: 2.4.1) (elib ver: 1.13 upstream: 1.0) (efs ver: 1.34 upstream: 1.24) (edit-utils ver: 2.38 upstream: No-Upstream-Ver) (edebug ver: 1.22 upstream: No-Upstream-Ver) (ecrypto ver: 0.2 upstream: 2.0) (easypg ver: 1.02 upstream: 0.0.16) (dired ver: 1.19 upstream: 7.16) (debug ver: 1.18 upstream: No-Upstream-Ver) (cc-mode ver: 1.45 upstream: 5.30.10) (calendar ver: 1.34 upstream: No-Upstream-Ver) (calc ver: 1.26 upstream: 2.02fX3) (c-support ver: 1.22 upstream: No-Upstream-Ver) (bbdb ver: 1.32 upstream: 2.35) (mule-base ver: 1.52 upstream: No-Upstream-Ver) (lookup ver: 1.15 upstream: 1.0) (locale ver: 1.27 upstream: No-Upstream-Ver) (latin-unity ver: 1.2 upstream: 1.20) (latin-euro-standards ver: 1.08 upstream: 1.08) Features: -------- (mail-abbrevs xemacsbug shadow sendmail rfc822 iswitchb occur next-error em-unix term ehelp electric em-term em-script em-prompt em-ls em-pred em-hist em-glob em-dirs em-cmpl esh-opt em-basic em-banner em-alias esh-var esh-io esh-ext esh-proc esh-arg esh-cmd esh-module esh-mode pp esh-util eshell view-less view info hyper-apropos symbol-syntax tags etags regexp-opt sh-script executable autoinsert tempo sgml-mode psgml psgml-html efs-dired dired-faces dired-xemacs dired efs-x19.15 efs-fnh efs-ovwrt efs-netrc efs-defun comint ring efs efs-dump efs-cu package-ui package-get package-admin config lazy-shot font-lock time mwheel vc-hooks vc-xemacs paren mic-paren timer cus-face icomplete jka-compr xemacs-devel-autoloads xemacs-base-autoloads vc-autoloads tramp-autoloads time-autoloads text-modes-autoloads texinfo-autoloads supercite-autoloads sounds-wav-autoloads sh-script-autoloads semantic-autoloads ruby-modes-autoloads python-modes-autoloads psgml-autoloads prog-modes-autoloads perl-modes-autoloads pcomplete-autoloads pcl-cvs-autoloads pc-autoloads os-utils-autoloads net-utils-autoloads mailcrypt-autoloads mail-lib-autoloads ispell-autoloads ibuffer-autoloads gnus-autoloads fsf-compat-autoloads footnote-autoloads eterm-autoloads eshell-autoloads elib-autoloads efs-autoloads edit-utils-autoloads edebug-autoloads ecrypto-autoloads easypg-autoloads dired-autoloads debug-autoloads cc-mode-autoloads calendar-autoloads calc-autoloads c-support-autoloads bbdb-autoloads mule-base-autoloads lookup-autoloads locale-autoloads latin-unity-autoloads latin-euro-standards-autoloads mule-autoloads auto-autoloads auto-show fontl-hooks canna-leim tibetan slovenian czech romanian lao devanagari indian cyrillic code-cmds gutter-items menubar-items x-menubar dragdrop mode-motion mouse behavior itimer auto-save lisp-mode easymenu easy-mmode iso8859-1 page buff-menu lib-complete loadhist cus-file derived newcomment rsz-minibuf env text-props frame obsolete cus-start custom widget cl-extra cl cl-19 packages backquote unicode mswindows-scrollbars mswindows toolbar native-sound scrollbar network-streams subprocesses menu-accelerator-support menubar md5 xemacs mule gutter tiff png gif jpeg xpm xbm lisp-float-type file-coding dde windows-nt dragdrop-api dialog devices window-system base64) Recent keystrokes: ----------------- M-b C-x o C-x o C-＠ C-e M-w C-x b RET g r e p SPC C-y SPC * . e l RET C-p C-p C-n C-n C-x o RET C-x b i u t RET M-x s h - b i BS g BS e g RET C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-left C-M-right C-M-right C-M-a C-v C-x k RET C-＠ C-e M-w M-x r e p o r TAB t BS x e m TAB RET Recent messages (most recent first): ----------------------------------- Loading xemacsbug...done Loading xemacsbug... Symbol's function definition is void: sh-beginning-of-compound-command Searched 1 buffer; no matches for `sh-beginning-of-compound-command' Searched 1 buffer; no matches for `sh-beginning-of-compound-command' Searched 1 buffer; no matches for `sh-beginning-of-compound-command' Searched 1 buffer; 1 match for `sh-beginning-of-compound-command' Searched 1 buffer; no matches for `sh-beginning-of-compound-command' Loading iswitchb...done Loading iswitchb... Searched 1 buffer; 1 match for `sh-beginning-of-' Searched 1 buffer; no matches for `sh-beginning-of-' Searched 1 buffer; no matches for `sh-beginning-of-' Searched 1 buffer; 6 matches for `sh-beginning-of-' Searched 1 buffer; no matches for `sh-beginning-of-' Loading occur...done Loading occur... Loading em-unix...done Loading em-unix... Loading em-term...done ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

1 participants
0 comments

[issue] Tracker procedures [keywords=+has doc] 16 years, 10 months

Stephen J. Turnbull

I really appreciate the efforts of several people in picking out issues and updating the tracker. There are some procedural issues I'd like to clarify. Don't worry too much about "conforming" exactly to procedure, but I would like to make some suggestions to make the tracker as useful as possible. (1) An issue should not be closed until you've confirmed that the issue is documented in the appropriate places. The mailing list archives do *not* count as documentation! (2) Missing, incorrect, or hard-to-find documentation *is* a bug in itself, even if the related behavior is acceptable. Do not close an issue as "not a bug" simply because somebody explained why it works that way on the mailing list. (3) If you find a patch labelled "committed" in the tracker, it's OK to assign the issue to the committer as committing a patch is a definite assumption of responsibility. However, by default you should bump status only as far as "assigned". (4) Be conservative about updating status. You should only push status to "committed", "documented", or "closed" if you understand the issue and any related patches or documentation well enough to have written them yourself. (That doesn't mean you need to be able to write it in English!) If you find yourself doing this more than once or twice, consider nominating yourself for XEmacs Reviewer. (No joke, we always need more reviewers!) (5) Keywords are important! Some keywords are workflow-related, the "has X" and "needs X" keywords in particular. The "has X" keyword means that such an item has been contributed, typically by the issue's creator, and needs to be confirmed before committing the change. The "needs X" keyword means that such an item must be developed and committed to resolve the issue. The "has X" and "needs X" keywords are *not* opposites. When a contributed X is verified and committed, the "has X" keyword should be removed. Similarly, when an X is developed and committed, the "needs X" keyword should be removed. Other keywords refer to XEmacs behavior, and are helpful to users in filtering out issues unrelated to their problem. At present, I've created the following keywords for general areas of XEmacs behavior: display, i18n, input/output, motion, performance, search, and security. Feel free to add more if appropriate, but as mentioned I'd like to keep the number small for now. Try to keep new keywords at a pretty high level of generality. Currently a majority of the keywords are tracker-related; I'm thinking about how to get them out of your face, but for now please bear with that. Thanks again for helping! _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

2 participants
2 comments

[Bug: 21.5-b28] why fold an 80-char line in an 80-col window? 16 years, 10 months

Stephen J. Turnbull

I've always wanted to fix this. Anybody know of reasons why not? Guido van Rossum writes: > (*) When is Emacs going to fix the bug where it decides to fold a line > that's exactly as wide as the window? This 79 business is really > silly, and had to impose on people using other editors. _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

4 participants
4 comments

[Bug: 21.5-b28] Bogus motion of modeline 16 years, 10 months

Stephen J. Turnbull

Antbody know anything about this? To get minibuffer/echo-area resizing, you need to enable resize-minibuffer-mode. Barry Warsaw writes: > BTW, while I have you here :). Are you aware of a modeline bug in > 21.5.28 that's definitely not present in 21.5.27? I've verified this > on both Ubuntu and OS X. To reproduce: split the window in half, then > M-x emacs-version RET. The output of emacs-version is more than one > line, and you see the full output in the echo area. However, when you > then hit C-g to clear the echo, it returns to a 1-line height > minibuffer, but the modeline that should be in the center of the > window has now crept upward by one line. Keep doing it long enough > and the middle mode line will reach the top of the window. > > Where this really bites you is when you're prompted to save a file to > a path that's bigger than 80 characters long. Do that enough and your > top window just gets slowly eaten away. _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

3 participants
2 comments

XEmacs Packages have been pre-released (2008-02-25-21) 16 years, 10 months

Norbert Koch

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hey there everyone. I have just added the following packages to the 'Pre-Releases' directory: New Packages in Pre-Release: =========================== xemacs-base-2.16-pkg.tar.gz upstream version: none Previously Announced Packages Still in Pre-Release: ================================================== apel-1.33-pkg.tar.gz upstream version: 10.6 auctex-1.48-pkg.tar.gz upstream version: 11.55 calendar-1.34-pkg.tar.gz upstream version: none cedet-common-1.01-pkg.tar.gz upstream version: 1.0pre4 dired-1.19-pkg.tar.gz upstream version: 7.16 easypg-1.02-pkg.tar.gz upstream version: 0.0.16 ediff-1.74-pkg.tar.gz upstream version: 2.75 edit-utils-2.38-pkg.tar.gz upstream version: none edt-1.14-pkg.tar.gz upstream version: none efs-1.34-pkg.tar.gz upstream version: 1.24 eieio-1.06-pkg.tar.gz upstream version: 1.0pre4 elib-1.13-pkg.tar.gz upstream version: 1.0 eshell-1.12-pkg.tar.gz upstream version: 2.4.1 eudc-1.40-pkg.tar.gz upstream version: 1.32 fsf-compat-1.16-pkg.tar.gz upstream version: none general-docs-1.05-pkg.tar.gz upstream version: none gnus-1.92-pkg.tar.gz upstream version: 5.10.8 guided-tour-0.51-pkg.tar.gz upstream version: none hm--html-menus-1.24-pkg.tar.gz upstream version: 5.9 hyperbole-1.17-pkg.tar.gz upstream version: 5.0 igrep-1.16-pkg.tar.gz upstream version: 2.111 latin-euro-standards-1.08-pkg.ta upstream version: 1.08 leim-1.27-pkg.tar.gz upstream version: none locale-1.27-pkg.tar.gz upstream version: none mh-e-1.31-pkg.tar.gz upstream version: 7.4.2 misc-games-1.20-pkg.tar.gz upstream version: none mule-base-1.52-pkg.tar.gz upstream version: none mule-ucs-1.16-pkg.tar.gz upstream version: 0.84 net-utils-1.54-pkg.tar.gz upstream version: N/A oo-browser-1.05-pkg.tar.gz upstream version: 4.08 os-utils-1.40-pkg.tar.gz upstream version: none pcl-cvs-1.68-pkg.tar.gz upstream version: R-2_9_9 perl-modes-1.11-pkg.tar.gz upstream version: none prog-modes-2.16-pkg.tar.gz upstream version: none ps-print-1.12-pkg.tar.gz upstream version: 6.5.6 psgml-1.45-pkg.tar.gz upstream version: 1.3.2 python-modes-1.10-pkg.tar.gz upstream version: 426 scheme-1.17-pkg.tar.gz upstream version: none sh-script-1.23-pkg.tar.gz upstream version: 2.0f skk-1.24-pkg.tar.gz upstream version: 10.62a speedbar-1.29-pkg.tar.gz upstream version: 1.0pre4 text-modes-1.95-pkg.tar.gz upstream version: none tramp-1.40-pkg.tar.gz upstream version: 2.0.56 vc-1.45-pkg.tar.gz upstream version: none viper-1.61-pkg.tar.gz upstream version: 3.09 vm-7.26-pkg.tar.gz upstream version: 7.19 w3-1.34-pkg.tar.gz upstream version: 4.0pre47 xemacs-devel-1.77-pkg.tar.gz upstream version: none xetla-1.02-pkg.tar.gz upstream version: steve(a)eicq.org--2005/xetla--main--1.1--version-0 Detailed Changes: ================ - ------- ChangeLog Entries from xemacs-packages/xemacs-base/ChangeLog ------- 2008-02-25 Norbert Koch <viteno(a)xemacs.org> * Makefile (VERSION): XEmacs package 2.16 released. 2008-02-23 Michael Sperber <mike(a)xemacs.org> * autoload-operators.el: Add this file, parameterizes autoload.el in the core. Installing These: ================ Manually: - -------- 1) Download the packages that you want to install from: /ftp.xemacs.org:/pub/xemacs/beta/experimental/packages/ 2) Unpack them to: [1] /usr/local/lib/xemacs/xemacs-packages/ 3) Re-start XEmacs. Using XEmacs Package Tools (XEmacs 21.[245].x): - ---------------------------------------------- 1) Tools -> Packages -> Add Download Site -> Pre-Releases 2) Tools -> Packages -> List and Install 3) Select the packages you wish to install (there are brief instructions at the bottom of the packages buffer). 4) Packages -> Install/Remove Selected 5) Re-start XEmacs. Using XEmacs Package Tools (XEmacs 21.1.14): - ------------------------------------------- 1) Options -> Manage Packages -> Add Download Site -> Pre-Releases 2) Options -> Manage Packages -> List and Install 3 - 5) As per XEmacs 21.[245].x. norbert - XEmacs Package Release Manager. Footnotes: [1] Note: Mule packages should be installed into: /usr/local/lib/xemacs/mule-packages/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHwyDagu3ywdHdhM0RAmHNAKDw9CFa4qj2DTHBvSvHRg4LkIbz3wCghMm8 kM5XjFfP2W7x4S6AIoisIFI= =mTWn -----END PGP SIGNATURE----- _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

1 participants
0 comments

Re: Speedbar now unconditionally requires ezimage 16 years, 10 months

Rick Rankin

> > > ----- Original Message ---- > From: FKtPp <mxxx＠yyy> > To: Rick Rankin <xxx＠yyy>; XEmacs Beta <xxx＠yyy> > Sent: Sunday, February 24, 2008 10:49:05 PM > Subject: Re: Speedbar now unconditionally requires ezimage > > M-x package-get-package-provider <RET> ezimage <RET> > ==> (cedet-common "1.01") Ahh, thank you. After all this time, I really should have known about that command. --Rick _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

1 participants
0 comments

Tracker now follows xemacs-beta 16 years, 10 months

Stephen J. Turnbull

The XEmacs issue tracker at http://tracker.xemacs.org/XEmacs/its/ now is watching the xemacs-beta mailing list. Specifically, if the Subject header contains either a `report-xemacs-bug' tag that looks like "[Bug: 21.5-b28]" or a Roundup "[issue]" tag, and is *not* a reply message, the post will be automatically gated to the tracker. If you are not using report-xemacs-bug, please use the "[issue]" tag to attract the tracker's attention. This is intended to make sure that issues raised on the mailing list will be filed on the tracker, to record progress and make them searchable. OTOH, trackers are a horrible place to hold discussions, so replies are currently not forwarded from the list to the tracker. Discussions should continue to be held on the xemacs-beta and xemacs-patches mailing lists. Rather, the tracker is intended to record concrete progress (see the User Guide in the tracker sidebar): a developer being assigned, a patch committed, etc. If appropriate, any experienced user may file an issue by resending an ordinary post (doesn't have to be your own!) to the mailing list, adding the Roundup "[issue]" tag to the Subject to get it recorded in the tracker. I'm not happy with the duplicates this will produce, but it shouldn't be that frequent, especially as people start to use those tags on initial posts. Remember you must avoid using reply headers (RFC 2822 References or In-Reply-To), so a resend or forward mechanism would be most appropriate. (Please check the tracker after you do this, and file bugs against the tracker if it mangles the particular format you used!) Also, developers may send tracker control messages via the mailing list, but they also need to avoid using reply headers (RFC 2822 References or In-Reply-To). See the User Guide for information about how to do this. Remember that you must use a full issue designator, such as [issue306], to do this. Suggestions for improving integration of the mailing lists and tracker while maintaining the discussion vs. progress record distinction are very welcome. (Discussions of the wisdom of the workflow policy somewhat less so at this moment: I'm open to change but first I want to get the thing working!) Specifically, (1) I wonder how to add xemacs-patches to this workflow. (2) The mechanism for forwarding a message to the tracker should be improved. Regards, Steve _______________________________________________ XEmacs-Beta mailing list XEmacs-Beta(a)xemacs.org http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta

1 participants
0 comments

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta February 2008