May 2001 - XEmacs-Beta - XEmacs Mailing List Archives

Matt Schulkind

How would I go about having all open files have a tab right below the toolbar, right now I'm not quite sure how xemacs chooses which files go there, but I'd like all to go there. Also, where in the furture would I find this information out on my own? Please cc all replies to me as I'm not on the list. -Matt

2 participants
1 comments

Problems migrating init file in 21.4.3 24 years, 1 month

Kevin Oberman

I just installed 21.4.3. send-pr (see earlier message) won't work, so I'm just mailing the bugs in. After fixing or commenting out code in my .emacs file that would not play with 21.4.3, I tried M-x migrate-user-init-file. It seemed to run OK, but the next time I started XEmacs, it said it could not find my init file. I looked in ~/.xemacs and saw init.el, but it was a link to ./emacs.laptop. But .emacs.laptop is located in my root directory. Why is it trying to use .emacs.laptop? I don't know. But I fixed the symlink and it seems to be OK, now. It may be because I had a symlink for .emacs. I don't remember, but it is possible. It did correctly strip the custom stuff out and put it in ~/.xemacs/custom.el. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman(a)es.net Phone: +1 510 486-8634

1 participants
0 comments

Problems with 21.4.3 "Academic Rigor" 24 years, 1 month

Kevin Oberman

I have had several problems with 21.4.3, the first to mention is that I could not do a send-pr. When I invoke M-x send-pr, I get the message: send-pr: the GNATS site xemacs.org does not have a categories list. Sigh. So I am sending in several problem reports to this list pending the ability to run send-pr. Built on Tru64 UNIX V4.0d and configured as: ./configure --without-gcc '--cflags=-fast -std' --with-site-lisp --site-includes=/usr/local/include More serious problems to follow. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman(a)es.net Phone: +1 510 486-8634

1 participants
0 comments

mule question 24 years, 1 month

John A. Turner

I've always build w/o mule, but a colleague needs mule he's building his own executable, but I thought we might as well share the same packages tree, since we saw that the mule-sumo tarball just has the extra mule stuff in it - it un-tars nicely into its own mule-packages subdir in lib/xemacs, parallel to the xemacs-packages I was already using but now when I start my non-mule xemacs I see these warnings: (1) (warning/warning) Autoload error in: /usr/net/rnd/lib/xemacs/mule-packages/lisp/skk/auto-autoloads: Cannot open load file: mule (2) (warning/warning) Autoload error in: /usr/net/rnd/lib/xemacs/mule-packages/lisp/lookup/auto-autoloads: Cannot open load file: mule is this just one of those "don't do that" things, or should this be ok? that is, should we just ignore the warnings, or do they indicate some deeper badness? thx, -- John A. Turner, Ph.D. Senior Research Associate Blue Sky Studios, 44 S. Broadway, White Plains, NY 10601 http://www.blueskystudios.com/ (914) 259-6319

4 participants
5 comments

M-y is stubborn 24 years, 1 month

eric dahlman

This bug report will be sent to the XEmacs Development Team, not to your local site managers!! Please write in English, because the XEmacs maintainers do not have translators to read other languages for them. In XEmacs 21.2 (beta46) "Urania" [Lucid] (sparc-sun-solaris2.8) of Tue Apr 10 2001 on sibelius configured using `configure --prefix=/s/chopin/d/proj/meps/common' Please describe exactly what actions triggered the bug and the precise symptoms of the bug: I have noticed that when I yank text with C-y and then want to go back through the kill ring with M-y it takes several M-y's before the first thing yanked is replaced by something different. I have noticed this for a while across several versions, I just finely got irritated enough to complain about it ;-) The recent keystrokes below contain my entire test run in a vanilla xemacs. I believe the the first M-y should have altered my inserted text but in this case it did not change until the fourth try. Thanks, -Eric Recent keystrokes: button1 button1up a a a RET b b b RET c c c RET d d d RET e e e RET up up up C-k C-y down down down C-y up up left left left C-k C-y down down down RET C-y up up up up up left left left C-k C-y down down down down down RET C-b down C-y RET C-y M-y M-y M-y M-y misc-user Recent messages (most recent first): Parsing /s/chopin/a/grad/dahlman/.mailrc... Loading mail-abbrevs...done Loading mail-abbrevs... Loading emacsbug...done Loading emacsbug...

1 participants
0 comments

XEmacs 21.4.3 "Academic Rigor" is released. 24 years, 1 month

Stephen J. Turnbull

* XEmacs 21.4.3 "Academic Rigor" is released. "Academic Rigor" is the fourth in the OXYMORON series. Relative to XEmacs 21.4.2 "Developer-Friendly Unix APIs", it contains fixes to two build bugs on Windows platforms and one for TTY-only, and a few typo fixes in the documentation. More detailed information about the changes is presented below. The first release in this series, Xemacs 21.4.0 "Solid Vapor", contained a large number of improvements and extensions to the current stable version, XEmacs 21.1.14. For more information about the OXYMORON series, see etc/NEWS, the initial release announcement http://www.xemacs.org/Releases/21.4.0.html and the release planning page, http://www.xemacs.org/Releases/Public-21.2/. For general information about XEmacs, the developers, and the user community, see our home page, http://www.xemacs.org/. * XEmacs 21.4.3 is "gamma" software. Besides the usual "no warranty" disclaimer (see etc/WARRANTY, sections 10 and 11), we are now experimenting with a level of stability intermediate between "beta" and "stable", dubbed "gamma". At this point all the developers and most of our beta testers trust the 21.4 code base with all their editing needs. However, for several reasons, for users who absolutely must minimize risk, we continue to recommend the 21.1 series. Nevertheless, almost all users will get very high reliability from XEmacs 21.4, and in return, access to many new features and improved functionality. No new destabilizing code will be added; each release in the 21.4 series should be strictly more stable and bug-free than the preceding one. We also recommend the 21.4 series to distribution packagers (such as Linux distributions and the open source BSD "ports" or "packages" maintainers) for their "testing" and "development" distributions. * Changes included in XEmacs 21.4.3 "Academic Rigor" There are no user-visible behavior changes. - (All Windows) Restore include of src/events-mod.h. - (Cygwin) Detect Windows native sound under Cygwin - (TTY-only) Restore patch for building --with-scrollbars=no - (small stack Unix) Can build with -DREGEX_MALLOC. - Update package docs - More photos - Misc comment fixes in source Thanks to Adrian Aichner (and several others) and Karl Hegbloom for catching me where I missed patches. Thanks to Yoshiki Hayashi, Paul Stodghill, and Steve Youngs for patches. * Getting and Installing XEmacs 21.4.3 XEmacs 21.4.3 is available in source form, including pre-compiled "core" Lisp libraries and pre-built Info files, from ftp.xemacs.org and mirrors (http://www.xemacs.org/Download/index.html#mirror_index). The file INSTALL in the top directory of the sources explains how to build XEmacs on Unix. The equivalent for Windows is nt/README. Note that building XEmacs 21.4 on Windows ME and other 9x variants is not currently supported. If you want to help fix the problems, please join the xemacs-nt mailing list. See http://www.xemacs.org/Download/ for general information about downloading XEmacs. For those wedded to their old command-line FTP client, the following URLs may be useful: ftp://ftp.xemacs.org/pub/xemacs/xemacs-21.4/xemacs-21.4.3.tar.gz or build the Lisp and Info from source, saving download time, with ftp://ftp.xemacs.org/pub/xemacs/xemacs-21.4/xemacs-21.4.3-src.tar.gz In either case, you need the "packaged Lisp" for more than the most basic functionality. You may use packages previously installed for use with XEmacs 21.1 or later without change. For new installations, the "SUMO" distribution of (almost) all packaged Lisp is available as ftp://ftp.xemacs.org/pub/xemacs/packages/xemacs-sumo.tar.gz ftp://ftp.xemacs.org/pub/xemacs/packages/xemacs-mule-sumo.tar.gz The latter should be installed only if you are building XEmacs with the MULE multilingual support; it contains Lisp files that cannot be correctly loaded by a unibyte XEmacs. See README.packages. XEmacs 21.4.3 is also available via anonymous CVS. To get the latest in the 21.4 series, check out (or update) with the "release-21-4" tag. This should be sufficient for almost all users; throughout this series patches will be carefully screened to ensure that every release is more stable than the last. If for some reason you specifically want this release, use the "r21-4-3" tag. See http://cvs.xemacs.org/ for general instructions on getting XEmacs via anonymous CVS. Binary kits are not planned at this time, except for selected releases for the MS Windows platform. Setups based on the Cygwin "netinstaller", Wise installer, and Installshield are in various degrees of readiness. The adventurous can subscribe to the xemacs-nt mailing list to learn about prerelease tests. The current public release for Windows is based on 21.4.0 "Solid Vapor". http://www.xemacs.org/Download/win32/setup.exe We are considering providing binary kits for important platforms that lack independent distributors once 21.4 is accepted as "stable". Volunteers should contact the Release Manager, "Stephen Turnbull" <stephen(a)xemacs.org>, and let me know for which platforms you can build. * Important notices for CVS users: The structure of the CVS repository for packaged Lisp is in the process of being reorganized, thanks to Steve Youngs. This will involve a change in the default hierarchy of workspaces. Please watch the xemacs-beta mailing list for details. The structure of the CVS repository for XEmacs sources has been rationalized thanks to Michael Sperber. The development code is now on the trunk. See earlier release announcements for details. Eg, http://www.xemacs.org/Releases/21.4.0.content#cvs * Thanks ... to all the developers, reviewers, and testers; to the Electrotechnical Laboratory and BeOpen.com for financial support; to Tux.org and SourceForge[tm] for hosting services; and to our users. May 17, 2001 XEmacs 21.4 Release Manager Stephen J. Turnbull <stephen(a)xemacs.org> -- University of Tsukuba Tennodai 1-1-1 Tsukuba 305-8573 JAPAN Institute of Policy and Planning Sciences Tel/fax: +81 (298) 53-5091 _________________ _________________ _________________ _________________ What are those straight lines for? "XEmacs rules."

1 participants
0 comments

Re: Update to last message 24 years, 1 month

James LewisMoss

>>>>> On 17 May 2001 18:28:50 +0900, Yoshiki Hayashi <yoshiki(a)xemacs.org> said: Yoshiki> James LewisMoss <jimdres(a)mindspring.com> writes: Andy> Do you set a bunch of stuff in Xdefaults? Does this show up Andy> even with vanilla? andy >> >> I've tracked it down to changing one customization. >> >> If I change the Progress Feedback Style to "small" I get a bunch >> of X errors, but no crash. Changing it back to "large" and the >> crash happens when I open the next file. Yoshiki> I cannot reproduce it. Debian sid and XEmacs 21.5 CVS a few Yoshiki> days ago. Could it be xaw-wrapper and xaw3d thing? This is Yoshiki> the only possibility I can guess. Not related to xaw3d. This situation was fixed in sid (afaik). It looks like bad values to an XDrawLine. I haven't tracked it down beyond that yet. Jim -- ＠James LewisMoss <dres(a)debian.org> | Blessed Be! ＠ http://jimdres.home.mindspring.com | Linux is kewl! ＠"Argue for your limitations and sure enough, they're yours." Bach

1 participants
0 comments

Updated Packages in Pre-Releases - May 12 24 years, 1 month

Steve Youngs

The following packages have been updated and put into the "Pre-Releases" directory: cc-mode-1.25-pkg.tar.gz ======================= 2001-05-11 Martin Stjernholm <bug-cc-mode(a)gnu.org> * cc-langs.el (c-switch-label-key): Regexp fix. efs-1.23-pkg.tar.gz =================== 2001-05-10 Ben Wing <ben(a)xemacs.org> * LISTS: * README (http): * efs-report.el (efs-bug-address): * efs-report.el (efs-report-bug): Note that this version is modified from the original, and that bugs related to this are not the maintainer's responsibility. * efs.el: * efs.el (efs-version): * efs.el (efs-null-device): New. * efs.el (efs-tmp-name-template): Fix up problems with Cygwin FTP client and Windows native XEmacs. * efs.el (efs-expand-tilde): Use efs-null-device. * efs.el (efs-guess-host-type): ditto. mule-base-1.38-pkg.tar.gz ========================= 2001-05-11 Alexey Mahotkin <alexm(a)hsys.msk.ru> * mule-diag.el: Fix list-coding-systems. xemacs-devel-1.34-pkg.tar.gz ============================ 2001-05-11 Steve Youngs <youngs(a)xemacs.org> * ibuffer.el: New. Previously announced packages currently in Pre-Releases ======================================================= egg-its-1.26-pkg.tar.gz pc-1.20-pkg.tar.gz prog-modes-1.38-pkg.tar.gz Installation Instructions: ========================== Manually: --------- Simply download the files from: ftp.xemacs.org/pub/xemacs/beta/experimental/packages/ And unpack them into: [1] /usr/local/lib/xemacs/xemacs-packages/ Using XEmacs package tools: (XEmacs 21.1.14) --------------------------- 1) Options -> Manage Packages -> Add Download Site -> Pre-Releases 2) Options -> Manage Packages -> List and Install 3) Choose the packages you wish to install (there are brief instructions at the bottom of the '*Packages*' buffer). 4) Packages -> Install/Remove Selected 5) Re-start XEmacs. Using XEmacs package tools: (XEmacs 21.2 and above) --------------------------- 1) Tools -> Packages -> Add Download Site -> Pre-Releases 2) Tools -> Packages -> List and Install 3 - 5) As per 21.1.14 instructions. As always, please let me know how it goes. Enjoy. Footnotes: [1] Note that 'mule-base-1.38-pkg.tar.gz' is a Mule package and therefore should be unpacked into: '/usr/local/lib/xemacs/mule-packages/' -- |---<Steve Youngs>---------------<GnuPG KeyID: 9E7E2820>---| | XEmacs - It's not just an editor. | | It's a way of life. | |------------------------------------<youngs(a)xemacs.org>---|

3 participants
3 comments

Re: Update to last message 24 years, 1 month

James LewisMoss

>>>>> On Tue, 08 May 2001 11:07:51 -0700, Andy Piper <andyp(a)bea.com> said: Andy> Do you set a bunch of stuff in Xdefaults? Does this show up Andy> even with vanilla? andy I've tracked it down to changing one customization. If I change the Progress Feedback Style to "small" I get a bunch of X errors, but no crash. Changing it back to "large" and the crash happens when I open the next file. Jim -- ＠James LewisMoss <dres(a)debian.org> | Blessed Be! ＠ http://jimdres.home.mindspring.com | Linux is kewl! ＠"Argue for your limitations and sure enough, they're yours." Bach

2 participants
1 comments

[Peter Mours <peterm@riedlbauer.com>] xemacs in HP-UX 11.0 24 years, 1 month

Adrian Aichner

Does anyone here know about this problem? Peter, you will have to provide a bit more information. Send in the information obtained by M-x describe-installation Best regards, Adrian -- Adrian Aichner mailto:adrian＠xemacs.org http://www.xemacs.org/

1 participants
0 comments

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta May 2001