Re: lstream writing, flushing, & closing
16 years, 10 months
Jerry James
Jerry James
Adrian Aichner <adrian(a)xemacs.org> wrote:
> Since I reverted my own patch to close handles, and built with Ben's
> megapatch implementing a corrected version thereof, I have not seen
> these uninterruptible hangs. I've been using XEmacs every day and
> kept it running for many days so I should have ween them.
>
> Thanks Ben!
[snip]
> It probably was not your patch after all, as stated above.
Well ... great! Would you mind trying my patch again, then? For
convenience, here it is:
Index: lstream.c
===================================================================
RCS file: /pack/xemacscvs/XEmacs/xemacs/src/lstream.c,v
retrieving revision 1.31
diff -d -u -r1.31 lstream.c
--- lstream.c 2004/11/12 17:16:30 1.31
+++ lstream.c 2004/11/29 04:42:28
＠＠ -778,8 +778,21 ＠＠
static int
Lstream_pseudo_close (Lstream *lstr)
{
+ int flush_rc;
+
if (! (lstr->flags & LSTREAM_FL_IS_OPEN))
Lstream_internal_error ("lstream is not open", lstr);
+
+ /* Flush all the data in the buffer before closing.
+ May require multiple passes thru Lstream_flush_out().
+ This loop (instead of just calling Lstream_flush_out(),
+ fixes a problem where we sometimes lose data sent to
+ a process.
+ */
+
+ do {
+ flush_rc = Lstream_flush_out(lstr);
+ } while (lstr->out_buffer_ind > 0 && flush_rc >= 0);
/* don't check errors here -- best not to risk file descriptor loss */
return Lstream_flush (lstr);
If the hangs return, then we can try the approach of figuring out what
data is getting lost here and where it was supposed to go.
Thanks,
--
Jerry James
http://www.ittc.ku.edu/~james/
- 3 participants
- 6 comments
Re: shell unmaintainable [Re: comint + shell still hosed]
17 years, 3 months
Jerry James
Jerry James
Please keep the discussion on the list.
"Ilya N. Golubev" <gin(a)mo.msk.ru> wrote:
>> Are you sure you have the shell.el as of 2006-06-01?
>
> It was an error in change merge. Because of continuous committing
> buggy versions in upstream, had to maintain a distinct local one.
> With `shell.el' as of 2006-06-01 fully duplicated, finding no more
> bugs. As for being able to run `comint', `shell', considering it
> closed.
I am happy to have had your help in identifying bugs in the sync, but I
don't understand why you think you have to maintain a distinct local
copy. Can't you just stick with the officially released packages? If
you are installing test packages, then you've agreed to be a tester.
And you've been a good one, so I hope you continue, but you shouldn't
feel like you are required to be a tester.
> One reason to still maintain another `shell.el' version is that is
> still has a maintainability bug. It does not `(require 'font-lock)'
> in run time, but does so in `eval-when-compile'. Already wrote that
> `font-lock' has a (IMO, mis-) feature of enabling itself on mere load,
> so there may be strong reasons not to load it. That perhaps makes no
> difference when compiling `shell.el' in batch mode, but user may need
> his own version of the file, and compile it by executing
> `byte-compile-file' interactively. In this case the undesired changes
> in his environment will occur.
>
> What is the purpose of such a `require' in `eval-when-compile'? If it
> is only to shut warnings about use of `font-lock-mode-hook', this
> variable is autoloaded, but in `auto-autoloads.el'. In this case
> should `(require 'lisp-autoloads)'.
>
> Changing `font-lock' not to enable itself on load (in all xemacs
> branches) perhaps would be even better.
Are you worried about this?
------------------------------------------------------------------------
;; Install ourselves:
(add-hook 'find-file-hooks 'font-lock-set-defaults t)
------------------------------------------------------------------------
I don't see anything else in font-lock.el that makes an obtrusive change
to the user's environment.
As for the byte compiling issue, (require 'auto-autoloads) is not the
right thing to do, because there are lots of auto-autoloads.el files,
one per package in fact. It is true that this is just to quiet a byte
compiler warning. That may be considered a small thing by some, but I
try to get rid of such warnings whenever I touch a package. I have this
dream that, eons from now, some XEmacs developer may be able to notice
that there were 2 warnings when compiling the packages and go fix the
problem. Right now, we get so many warnings that they are nearly
worthless.
We could drop the require of font-lock and get the warning back. I'm
not terribly concerned about this, though, because (1) we distribute the
packages in precompiled form, which is good enough for the vast majority
of users; and (2) anybody who needs to compile their own due to
maintaining local variations should be sophisticated enough to deal with
a change in find-file-hooks.
--
Jerry James, Assistant Professor Jerry.James(a)usu.edu
Computer Science Department http://www.cs.usu.edu/~jerry/
Utah State University
- 6 participants
- 18 comments
[Bug: 21.5-b25] dired messes up DOS line-encoding handling
17 years, 9 months
Joachim Schrod
Joachim Schrod
================================================================
Dear Bug Team!
When one loads dired, and afterwards loads a text file with DOS
line-encoding (i.e., with CR-LF endings), the line-encoding is
correctly parsed, but not represented in buffer encoding state. When
the file is changed and written out again, all line-endings have been
converted to LF.
How to create the issue, with the appended file intro-dos.txt:
-- Start
xemacs -vanilla .
-- C-x C-f intro-dos.txt
-- Mode line shows Raw and not Raw:T
-- Change something, C-x C-s
-- Saved file has now LF line-endings.
As always, If I can help any further to track down the problem, I'm
willing to invest more work. But I would need your guidance where to
look -- I don't want to check the whole dired code if it messes
with coding-systems somewhere.
Best,
Joachim
PS: Sorry that I have no b27 running, but I didn't find the time to
check its stability for daily usage.
================================================================
System Info to help track down your bug:
---------------------------------------
uname -a: Linux n-pussy 2.6.13-15.8-smp #1 SMP Tue Feb 7 11:07:24 UTC 2006 i686 i686 i386 GNU/Linux
./configure '--prefix=/opt/xemacs' '--with-optimization' '--with-error-checking=none' '--with-ipv6-cname=no' '--with-pop' '--with-mule' '--with-athena=3d'
XEmacs 21.5-b25 "eggplant" configured for `i686-pc-linux'.
Compilation Environment and Installation Defaults:
Source code location: /home/schrod/src/xemacs/xemacs-r21-5-current-beta
Installation prefix: /opt/xemacs
Operating system description file: `s/linux.h'
Machine description file: `m/intel386.h'
Compiler version: gcc (GCC) 4.0.2 20050901 (prerelease) (SUSE Linux)
- GCC specs file: specs.
- Compiler command: gcc -Wall -Wno-switch -Wundef -Wsign-compare -Wno-char-subscripts -Wpacked -Wunused-parameter -g -O3
libc version: 2.3.5
Relocating allocator for buffers: no
GNU version of malloc: yes
- Using Doug Lea's new malloc from the GNU C Library.
Window System:
Compiling in support for the X window system:
- X Windows headers location: /usr/X11/include
- X Windows libraries location: /usr/X11/lib
- Handling WM_COMMAND properly.
Compiling in support for the Athena widget set:
- Athena headers location: X11/Xaw3d
- Athena library to link: Xaw3d
Using Lucid menubars.
Using Lucid scrollbars.
Using Athena dialog boxes.
Using Athena native widgets.
TTY:
Compiling in support for ncurses.
Compiling in support for GPM (General Purpose Mouse).
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Sound:
Compiling in support for sound (native).
Databases:
Compiling in support for LDAP.
Internationalization:
Compiling in support for Mule (multi-lingual Emacs).
Compiling in support for XIM (X11R5+ I18N input method).
- Using raw Xlib to provide XIM support.
Mail:
Compiling in support for POP mail retrieval.
Compiling in support for "file" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for dynamic shared object modules.
Using the new GC algorithms.
WARNING: ---------------------------------------------------------
WARNING: The new algorithms are experimental. They are enabled by
WARNING: default for this release. Use `--disable-kkcc' to
WARNING: turn it off.
WARNING: ---------------------------------------------------------
Using the new allocator.
WARNING: ---------------------------------------------------------
WARNING: The new allocator is experimental. It is enabled by
WARNING: default for this release. Use `--disable-mc-alloc' to
WARNING: turn it off.
WARNING: ---------------------------------------------------------
Using the new portable dumper.
Compiling in support for extra debugging code.
Load-Path Lisp Shadows:
----------------------
(/opt/xemacs/lib/xemacs/site-packages/lisp/packages/cl-indent
/opt/xemacs/lib/xemacs/xemacs-packages/lisp/prog-modes/cl-indent
/opt/xemacs/lib/xemacs/mule-packages/lisp/mule-base/viet-util
/opt/xemacs/lib/xemacs-21.5-b25/lisp/mule/viet-util
/opt/xemacs/lib/xemacs/mule-packages/lisp/mule-base/korea-util
/opt/xemacs/lib/xemacs-21.5-b25/lisp/mule/korea-util
/opt/xemacs/lib/xemacs/mule-packages/lisp/mule-base/japan-util
/opt/xemacs/lib/xemacs-21.5-b25/lisp/mule/japan-util
/opt/xemacs/lib/xemacs/mule-packages/lisp/mule-base/ethio-util
/opt/xemacs/lib/xemacs-21.5-b25/lisp/mule/ethio-util
/opt/xemacs/lib/xemacs/mule-packages/lisp/mule-base/cyril-util
/opt/xemacs/lib/xemacs-21.5-b25/lisp/mule/cyril-util
/opt/xemacs/lib/xemacs/mule-packages/lisp/mule-base/china-util
/opt/xemacs/lib/xemacs-21.5-b25/lisp/mule/china-util
/opt/xemacs/lib/xemacs/xemacs-packages/lisp/xemacs-base/regexp-opt
/opt/xemacs/lib/xemacs-21.5-b25/lisp/regexp-opt
/opt/xemacs/lib/xemacs/xemacs-packages/lisp/xemacs-base/easy-mmode
/opt/xemacs/lib/xemacs-21.5-b25/lisp/easy-mmode
/opt/xemacs/lib/xemacs/xemacs-packages/lisp/build/build-report
/opt/xemacs/lib/xemacs-21.5-b25/lisp/build-report)
Installed XEmacs Packages:
-------------------------
(zenirc ver: 1.16 upstream: 2.112)
(xwem ver: 1.21 upstream: lg(a)xwem.org--2005/xwem--main--2.1--versionfix-1)
(xslt-process ver: 1.12 upstream: 1.2.1)
(xslide ver: 1.09 upstream: 0.2.2)
(xlib ver: 1.14 upstream: lg(a)xwem.org--2005/xlib--main--2.1--version-0)
(xetla ver: 1.01 upstream: steve(a)eicq.org--2005/xetla--main--1.1--version-0)
(xemacs-devel ver: 1.72 upstream: No-Upstream-Ver)
(xemacs-base ver: 2.01 upstream: No-Upstream-Ver)
(x-symbol ver: 1.1 upstream: 4.5.1)
(w3 ver: 1.32 upstream: 4.0pre47)
(vm ver: 7.22 upstream: 7.17)
(viper ver: 1.47 upstream: 3.09)
(view-process ver: 1.13 upstream: 2.4)
(vhdl ver: 1.2 upstream: 3.33.2)
(vc-cc ver: 1.22 upstream: No-Upstream-Ver)
(vc ver: 1.41 upstream: No-Upstream-Ver)
(tramp ver: 1.28 upstream: 2.0.51)
(tpu ver: 1.14 upstream: 4.2X)
(tooltalk ver: 1.15 upstream: No-Upstream-Ver)
(tm ver: 1.38 upstream: No-Upstream-Ver)
(time ver: 1.14 upstream: 1.17)
(textools ver: 1.15 upstream: No-Upstream-Ver)
(text-modes ver: 1.9 upstream: No-Upstream-Ver)
(texinfo ver: 1.3 upstream: No-Upstream-Ver)
(supercite ver: 1.21 upstream: 3.55x3)
(strokes ver: 1.1 upstream: No-Upstream-Ver)
(speedbar ver: 1.28 upstream: 0.14beta4)
(sounds-wav ver: 1.12 upstream: No-Upstream-Ver)
(sounds-au ver: 1.12 upstream: No-Upstream-Ver)
(sml-mode ver: 0.12 upstream: 3.9.5)
(slider ver: 1.15 upstream: 0.3x1)
(sieve ver: 1.18 upstream: No-Upstream-Ver)
(sh-script ver: 1.21 upstream: 2.0f)
(sgml ver: 1.11 upstream: No-Upstream-Ver)
(semantic ver: 1.19 upstream: 1.4.2)
(scheme ver: 1.14 upstream: No-Upstream-Ver)
(sasl ver: 1.16 upstream: 1.14.4)
(ruby-modes ver: 1.02 upstream: 1.6.8)
(riece ver: 1.21 upstream: 2.0.2)
(reftex ver: 1.34 upstream: 4.21)
(re-builder ver: 1.05 upstream: 1.20)
(python-modes ver: 1.07 upstream: No-Upstream-Ver)
(psgml-dtds ver: 1.03 upstream: No-Upstream-Ver)
(psgml ver: 1.44 upstream: 1.3.1)
(ps-print ver: 1.11 upstream: 6.5.6)
(prog-modes ver: 2.06 upstream: No-Upstream-Ver)
(pgg ver: 1.06 upstream: 0.1)
(perl-modes ver: 1.08 upstream: No-Upstream-Ver)
(pcomplete ver: 1.04 upstream: 1.1.6)
(pcl-cvs ver: 1.66 upstream: R-2_9_9)
(pc ver: 1.28 upstream: No-Upstream-Ver)
(os-utils ver: 1.36 upstream: No-Upstream-Ver)
(oo-browser ver: 1.04 upstream: 4.08)
(ocaml ver: 0.05 upstream: 3.06)
(net-utils ver: 1.48 upstream: N/A)
(mmm-mode ver: 1.02 upstream: 0.4.7)
(misc-games ver: 1.18 upstream: No-Upstream-Ver)
(mine ver: 1.16 upstream: 1.9)
(mh-e ver: 1.29 upstream: 7.4.2)
(mew ver: 1.19 upstream: 1.94.2)
(mailcrypt ver: 2.14 upstream: 3.5.8)
(mail-lib ver: 1.75 upstream: No-Upstream-Ver)
(liece ver: 1.14 upstream: 1.4.9)
(jde ver: 1.48 upstream: 2.3.2)
(ispell ver: 1.32 upstream: 3.6)
(ilisp ver: 1.33 upstream: 5.12.0)
(igrep ver: 1.14 upstream: 2.111)
(idlwave ver: 1.32 upstream: 5.1)
(ibuffer ver: 1.09 upstream: No-Upstream-Ver)
(hyperbole ver: 1.16 upstream: 4.18)
(hm--html-menus ver: 1.23 upstream: 5.9)
(haskell-mode ver: 1.07 upstream: 1.45)
(gnus ver: 1.89 upstream: 5.10.7)
(gnats ver: 1.17 upstream: 3.101)
(general-docs ver: 1.04 upstream: No-Upstream-Ver)
(games ver: 1.17 upstream: 1.04)
(fsf-compat ver: 1.15 upstream: No-Upstream-Ver)
(frame-icon ver: 1.11 upstream: No-Upstream-Ver)
(fortran-modes ver: 1.05 upstream: No-Upstream-Ver)
(forms ver: 1.15 upstream: 2.37)
(footnote ver: 1.16 upstream: 0.18x)
(eudc ver: 1.39 upstream: 1.32)
(eterm ver: 1.17 upstream: No-Upstream-Ver)
(ess ver: 1.16 upstream: 5.2.7)
(eshell ver: 1.1 upstream: 2.4.1)
(escreen ver: 1.01 upstream: 1.16)
(erc ver: 0.19 upstream: Version 5.0 Revision: 1.776)
(emerge ver: 1.11 upstream: No-Upstream-Ver)
(elib ver: 1.11 upstream: 1.0)
(eieio ver: 1.05 upstream: 0.17)
(efs ver: 1.33 upstream: 1.23)
(edt ver: 1.13 upstream: No-Upstream-Ver)
(edit-utils ver: 2.32 upstream: No-Upstream-Ver)
(ediff ver: 1.6 upstream: 2.75)
(edebug ver: 1.21 upstream: No-Upstream-Ver)
(ecrypto ver: 0.2 upstream: 2.0)
(ecb ver: 1.22 upstream: 2.31)
(docbookide ver: 0.07000000000000001 upstream: 0.1)
(dired ver: 1.17 upstream: 7.13)
(dictionary ver: 1.16 upstream: 1.8)
(debug ver: 1.17 upstream: No-Upstream-Ver)
(crisp ver: 1.15 upstream: 1.34)
(cookie ver: 1.15 upstream: No-Upstream-Ver)
(clearcase ver: 1.1 upstream: /main/laptop/165)
(cc-mode ver: 1.45 upstream: 5.30.10)
(calendar ver: 1.23 upstream: No-Upstream-Ver)
(calc ver: 1.26 upstream: 2.02fX3)
(c-support ver: 1.22 upstream: No-Upstream-Ver)
(build ver: 1.14 upstream: 2.02)
(bbdb ver: 1.29 upstream: 2.34)
(auctex ver: 1.46 upstream: 11.55)
(apel ver: 1.32 upstream: 10.6)
(ada ver: 1.14 upstream: 2.27)
(Sun ver: 1.16 upstream: No-Upstream-Ver)
(mule-base ver: 1.47 upstream: No-Upstream-Ver)
(lookup ver: 1.15 upstream: 1.0)
(locale ver: 1.22 upstream: No-Upstream-Ver)
(leim ver: 1.22 upstream: No-Upstream-Ver)
(latin-unity ver: 1.16 upstream: 1.16)
(latin-euro-standards ver: 1.07 upstream: 1.07)
(egg-its ver: 1.27 upstream: No-Upstream-Ver)
(edict ver: 1.16 upstream: 0.9.9)
Installed Modules:
-----------------
Features:
--------
(mail-abbrevs xemacsbug shadow sendmail rfc822 trim-lines template
efs-cu cus-face dired-faces dired-xemacs dired zenirc-autoloads
xwem-autoloads xslt-process-autoloads xslide-autoloads xlib-autoloads
xetla-autoloads xemacs-devel-autoloads xemacs-base-autoloads
x-symbol-autoloads w3-autoloads vm-autoloads viper-autoloads
view-process-autoloads vhdl-autoloads vc-cc-autoloads vc-autoloads
tramp-autoloads tpu-autoloads tooltalk-autoloads tm-autoloads
time-autoloads textools-autoloads text-modes-autoloads
texinfo-autoloads supercite-autoloads strokes-autoloads
speedbar-autoloads sounds-wav-autoloads sounds-au-autoloads
sml-mode-autoloads slider-autoloads sieve-autoloads
sh-script-autoloads sgml-autoloads semantic-autoloads scheme-autoloads
sasl-autoloads ruby-modes-autoloads riece-autoloads reftex-autoloads
re-builder-autoloads python-modes-autoloads psgml-dtds-autoloads
psgml-autoloads ps-print-autoloads prog-modes-autoloads pgg-autoloads
perl-modes-autoloads pcomplete-autoloads pcl-cvs-autoloads
pc-autoloads os-utils-autoloads oo-browser-autoloads ocaml-autoloads
net-utils-autoloads mmm-mode-autoloads misc-games-autoloads
mine-autoloads mh-e-autoloads mew-autoloads mailcrypt-autoloads
mail-lib-autoloads liece-autoloads jde-autoloads ispell-autoloads
ilisp-autoloads igrep-autoloads idlwave-autoloads ibuffer-autoloads
hyperbole-autoloads hm--html-menus-autoloads haskell-mode-autoloads
gnus-autoloads gnats-autoloads general-docs-autoloads games-autoloads
fsf-compat-autoloads frame-icon-autoloads fortran-modes-autoloads
forms-autoloads footnote-autoloads eudc-autoloads eterm-autoloads
ess-autoloads eshell-autoloads escreen-autoloads erc-autoloads
emerge-autoloads elib-autoloads eieio-autoloads efs-autoloads
edt-autoloads edit-utils-autoloads ediff-autoloads edebug-autoloads
ecrypto-autoloads ecb-autoloads docbookide-autoloads dired-autoloads
dictionary-autoloads debug-autoloads crisp-autoloads cookie-autoloads
clearcase-autoloads cc-mode-autoloads calendar-autoloads
calc-autoloads c-support-autoloads build-autoloads bbdb-autoloads
auctex-autoloads apel-autoloads ada-autoloads Sun-autoloads
mule-base-autoloads lookup-autoloads locale-autoloads leim-autoloads
latin-unity-autoloads latin-euro-standards-autoloads egg-its-autoloads
edict-autoloads npc-sp-utils-autoloads npc-packages-autoloads
npc-modes-autoloads modules-autoloads mule-autoloads auto-autoloads
loadhist rsz-minibuf auto-show fontl-hooks canna-leim tibetan lao
devanagari indian slovenian czech romanian ccl code-cmds gutter-items
menubar-items x-menubar mode-motion mouse behavior itimer auto-save
lisp-mode easymenu easy-mmode iso8859-1 page buff-menu lib-complete
cus-file derived newcomment env text-props fontconfig frame obsolete
cus-start custom widget cl-extra cl cl-19 packages backquote unicode
lucid-scrollbars cut-buffer lucid-menubars athena-dialogs x
c-balloon-help tty-frames tty toolbar native-sound scrollbar
unix-processes multicast network-streams subprocesses modules
menu-accelerator-support menubar md5 xemacs xim mule gutter tiff png
gif jpeg xpm xbm lisp-float-type file-coding linux dialog devices
window-system base64)
Recent keystrokes:
-----------------
C-x C-f i n t r TAB RET SPC BS C-x C-s C-x b RET m
isc-user
Recent messages (most recent first):
-----------------------------------
Warning:
Defaulting to the GNU Emacs-derived `sendmail.el' mail client. This facility,
while part of base XEmacs, is heinously underfeatured, and not going to get
better in the medium term. We include it so that bug reports work without
packages; we suggest that you choose and/or install one of the other mail
clients from packages if you're doing something other than M-x
report-xemacs-bug , or even if you are reporting bugs regularly.
To choose a package from those installed, click on "Options" ->
"Internet" -> "Compose Mail With ..." and decide on one from the
list. Gnus and VM are full-featured and have active user communities.
To disable this warning and stick with the old behavior, you can explicitly
initialize `mail-user-agent' to 'sendmail-user-agent .
Loading xemacsbug...done
Loading xemacsbug...
Wrote /home/schrod/tmp/intro-dos.txt
Loading trim-lines...done
Loading trim-lines...
Loading template...done
Loading template...
Loading efs-cu...done
Loading efs-cu...
Reading directory /home/schrod/tmp/...done
Reading directory /home/schrod/tmp/...
Loading dired...done
Loading dired-mule...done
Loading dired-mule...
Loading cus-face...done
Loading cus-face...
Loading dired...
- 4 participants
- 4 comments
Strange delays when running remotely
17 years, 10 months
David E Sigeti
David E Sigeti
This bug report will be sent to the XEmacs Development Team,
not to your local site managers!!
Please write in English, because the XEmacs maintainers do not have
translators to read other languages for them.
Please describe as succinctly as possible:
- What happened.
- What you thought should have happened.
- Precisely what you were doing at the time.
Please also include any C or lisp back-traces that you may have.
================================================================
Dear Bug Team!
When running Xemacs version 21 remotely (displaying on my local X
server) I have found that any multicharacter kills (such as kill-line,
kill-word, kill-ring-save, etc.) are extremely slow (maybe 15-30
seconds per kill). I only see this delay when I am running over a DSL
connection where the ping times to the remote system are on the order
of 100 milliseconds or more. When my local machine is on the same LAN
as the remote machine (much shorter ping times), I do not notice any
unusual delay in multicharacter kills. I also do not see this problem
when running Xemacs version 20.
My local X server when using the DSL connection is Exceed 3D running
under Microsoft Windows 98SE. When using the LAN, my local X server
is also Exceed 3D but running under Microsoft Windows 2000.
Yours,
David
---
Dr. David E. Sigeti
Phone: 505-667-9239
E-mail: sigeti(a)lanl.gov
Surface mail: MS-F645, Los Alamos National Laboratory,
Los Alamos, NM 87545 USA
================================================================
System Info to help track down your bug:
---------------------------------------
uname -a: IRIX64 t01 6.5 04131233 IP27
../../packages/xemacs-21.4.8/configure '--prefix=/users/sigeti/' '--exec-prefix=/users/sigeti/bin/mips-sgi-irix6.5/' '--pdump'
XEmacs 21.4.8 "Honest Recruiter" configured for `mips-sgi-irix6.5'.
Compilation / Installation:
Source code location: /users/sigeti/packages/xemacs-21.4.8
Installation prefix: /users/sigeti/
Runtime library search path: /usr/lib32/mips3:/usr/lib32
Operating system description file: `s/irix6-0.h'
Machine description file: `m/iris6d.h'
Compiler: gcc -g -O3 -Wall -Wno-switch -Winline -Wmissing-prototypes -Wsign-compare -Wshadow -Wpointer-arith
Relocating allocator for buffers: yes
GNU version of malloc: yes
Window System:
Compiling in support for the X window system:
- X Windows headers location:
- X Windows libraries location:
- Handling WM_COMMAND properly.
Using Lucid menubars.
Using Lucid scrollbars.
Using Motif dialog boxes.
Using Motif native widgets.
TTY:
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
WARNING: -----------------------------------------------------------
WARNING: Compiling without PNG image support.
Reason: PNG library version too old (pre 1.0.2)!
WARNING: You should strongly consider installing the PNG libraries.
WARNING: Otherwise certain images and glyphs may not display.
WARNING: (a copy may be found in ftp://ftp.xemacs.org/pub/xemacs/aux)
WARNING: -----------------------------------------------------------
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Sound:
Compiling in support for sound (native).
Databases:
Compiling in support for Berkeley database.
Compiling in support for DBM.
Internationalization:
Mail:
Compiling in support for "dot-locking" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for dynamic shared object modules.
Using the new portable dumper.
Load-Path Lisp Shadows:
----------------------
nil
Installed XEmacs Packages:
-------------------------
((xemacs-devel:version 1.44 :type single-file)
(xemacs-base :version 1.63 :type regular)
(w3 :version 1.23 :type regular)
(vm :version 7.07 :type regular)
(vc-cc :version 1.18 :type regular)
(vc :version 1.33 :type regular)
(tm :version 1.32 :type regular)
(text-modes :version 1.46 :type single-file)
(speedbar :version 1.23 :type regular)
(sh-script :version 1.15 :type regular)
(rmail :version 1.13 :type regular)
(ps-print :version 1.04 :type regular)
(prog-modes
:version
1
.57
:type
single-file)
(pcl-cvs :version 1.63 :type regular)
(net-utils :version 1.25 :type single-file)
(mh-e :version 1.14 :type regular)
(mailcrypt :version 2.11 :type regular)
(mail-lib :version 1.46 :type regular)
(ispell :version 1.24 :type regular)
(ilisp :version 1.26 :type regular)
(gnus :version 1.61 :type regular)
(fsf-compat :version 1.11 :type single-file)
(eterm :version 1.13 :type regular)
(emerge :version 1.09 :type regular)
(elib :version 1.1 :type single-file)
(efs :version 1.29 :type regular)
(edit-utils :version 1.88 :type single-file)
(ediff :version 1.41 :type regular)
(edebug :version 1.14 :type regular)
(dired :version 1.12 :type regular)
(cc-mode :version 1.28 :type regular)
(apel :version 1.23 :type regular))
Features:
--------
(mail-abbrevs xemacsbug shadow sendmail rfc822 dired-faces
dired-xemacs dired font disp-table cus-face xemacs-devel-autoloads
xemacs-base-autoloads w3-autoloads vm-autoloads vc-cc-autoloads
vc-autoloads tm-autoloads text-modes-autoloads speedbar-autoloads
sh-script-autoloads rmail-autoloads ps-print-autoloads
prog-modes-autoloads pcl-cvs-autoloads net-utils-autoloads
mh-e-autoloads mailcrypt-autoloads mail-lib-autoloads ispell-autoloads
ilisp-autoloads gnus-autoloads fsf-compat-autoloads eterm-autoloads
emerge-autoloads elib-autoloads efs-autoloads edit-utils-autoloads
ediff-autoloads edebug-autoloads dired-autoloads cc-mode-autoloads
apel-autoloads lisp-autoloads loadhist auto-show fontl-hooks
x-iso8859-1 gutter-items menubar-items x-menubar mode-motion mouse
itimer auto-save lisp-mode easymenu iso8859-1 page buff-menu
lib-complete help-nomule cus-file derived frame text-props obsolete
cus-start custom widget cl-extra mini-cl cl cl-19 packages backquote
very-early-lisp lucid-scrollbars cut-buffer lucid-menubars
motif-dialogs x c-balloon-help tty-frames tty toolbar native-sound
scrollbar unix-processes multicast network-streams subprocesses
modules menu-accelerator-support menubar berkeley-db dbm md5 xemacs
gutter tiff gif jpeg xpm xbm lisp-float-type irix dialog devices
window-system base64)
Recent keystrokes:
-----------------
C-x C-f RET M-x r e p SPC o SPC r SPC x SPC SPC RE
T
Recent messages (most recent first):
-----------------------------------
Loading xemacsbug...done
Loading xemacsbug...
Making completion list...
Making completion list...
Reading directory /users/sigeti/...done
Reading directory /users/sigeti/...
Loading dired...done
Loading dired...
Loading font...done
Loading font...
Loading cus-face...done
Loading cus-face...
- 13 participants
- 25 comments
Re: [Bug: 21.4.19] balloon help niggles on Windows
17 years, 11 months
Robert Pluim
Robert Pluim
On 8/18/06, Robert Pluim <rpluim(a)gmail.com> wrote:
>
>
>
> 4. The balloon-help frame actually has a title. I was expecting it to
> just be a tooltippy kind of window. Perhaps it should be a dialog
> rather than a window?
>
Ok, we could fix this by removing WS_CAPTION from MSWINDOWS_POPUP_STYLE, I
think. If we wanted to, that is.
Robert
- 3 participants
- 5 comments
checking for fields
17 years, 11 months
Ilya N. Golubev
Ilya N. Golubev
Emacs version: 21.4a. Merged from emacs 21 to xemacs 21.5 with the
same bug, so cross- posting there.
`beginning-of-line' (in emacs only: another inconsistency of the
merge), `forward-paragraph' and many other commands by default refuse
to move across field boundaries. It is not even stated so in their
docstings, for `forward-paragraph' at least.
Other commands on top of them are also affected by that, and in an
obscure way. Viper vi state `f' command operate within paragraph
boundary as determined by `forward-paragraph' (which is also not
documented), and if the boundary is before the end of line due to
fields, then characters on that line are not found as expected.
It actually happens with default settings of `shell-mode', if point is
in shell prompt and character to find is in command being edited,
which are different fields set up by `comint'.
There is even no interactive commands to check for fields explicitly.
All of the field limiting only overloads existing point movement
commands. Some packages may set different faces for different fields,
like `comint' does (using `comint-highlight-prompt' face), or may set
nothing except fields themselves. It is entirely up to package. And
even if face with different foreground color (or other visual
attributes) is set, differences between it and text outside the field
may be visible or not visible on particular display / terminal.
(With xemacs `comint.el' after revision 1.14 of 2006/05/25 it is even
more complex. `comint-highlight-prompt' is used only for
`font-lock-face' extent property, so there is an additional unknown of
whether font lock mode is on. It is also not typical use of font lock
to denote otherwise hidden text areas across which regular editing
commands will refuse to move, and thus required in this case.
Normally it is used for syntax structures which may be easily
recognized otherwise, across which editing commands move freely, and
thus optional.)
Generally user has to resort to evaluating elisp expressions to figure
what is going on. Or, in emacs, work around it all by setting
`inhibit-field-text-motion t' locally. Can not do so in xemacs due to
bug in its comint.
For these reasons considering lack of interactive commands to check
for field boundaries a bug. These commands should do the same
regardless of minor modes, faces attributes and display capabilities
in particular emacs process.
Explicit error messages about hitting field boundary would be even
better.
** Why still report for emacs 21.
Limiting movements to fields as described appeared in 21 release
branch only, as 1999-10-17 Miles Bader <miles(a)gnu.org> change.
If users could have noticed that and complained about that in that
time, it would be reasonable now to recommend them just to switch to
new development branch from release 21 one. But at that time emacs
cvs was not publicly readable. Such a recommendation would be at best
unreasonable. It signals that now it is <too late> to complain about
release 21 bugs. Until 21 release, it was <too early> to do so. When
there was time to do so, then?
- 2 participants
- 2 comments
Re: [Fwd: [Success with a little effort] XEmacs 21.4.19
17 years, 11 months
Adrian Aichner
Adrian Aichner
Rodney Sparapani <rsparapa(a)mcw.edu> writes:
> Adrian Aichner wrote:
>
>>
>>
>>Hey all, is this patch still applicable?
>>
>>Rodney, what else have you done to build XEmacs 21.4.19 with ESD
>>support?
>>
>>
>>
> Hi Adrian:
>
> I'm not sure what you are asking me. Is the build report not clear
> about something? Please let me know.
Hi Rodney, I was wondering about your configure options.
Perhaps you could send the Installation file or output of
M-x describe-installation
unless you've already done so.
Best regards!
Adrian
--
Adrian Aichner
mailto:adrian＠xemacs.org
http://www.xemacs.org/
- 2 participants
- 3 comments
[Bug: 21.5-b27] Still a huge leak in XEmacs-21.5.27-latest-CVS's newgc
18 years
Nix
Nix
================================================================
Dear Bug Team!
Well, it looks like XEmacs-latest-CVS doesn't fix the huge memory leak
in the new garbage collector.
nix＠hades 268 /home/nix% ps -o rss,vsz,args -C xemacs
RSS VSZ COMMAND
452240 615008 xemacs
Using Gnus for a few minutes, visiting a couple of groups with ~1000
unread articles in, and fiddling with some elisp to try to customize
my modeline is all that's needed to trigger it here.
(cl-prettyprint (gc-stats)) ->
(phase 0.0
n-gc-total
64.0
n-cycles-total
435.0
n-cycles-in-last-gc
1.0
n-cycles-in-this-gc
1.0
enqueued-total
64597385.0
enqueued-in-last-gc
1235053.0
enqueued-in-last-cycle
1235053.0
enqueued-in-this-gc
1504431.0
enqueued-in-this-cycle
1504431.0
dequeued-total
64597385.0
dequeued-in-last-gc
1235053.0
dequeued-in-last-cycle
1235053.0
dequeued-in-this-gc
1504431.0
dequeued-in-this-cycle
1504431.0
enqueued2-total
5949.0
enqueued2-in-last-gc
0.0
enqueued2-in-last-cycle
0.0
enqueued2-in-this-gc
0.0
enqueued2-in-this-cycle
0.0
dequeued2-total
5949.0
dequeued2-in-last-gc
0.0
dequeued2-in-last-cycle
0.0
dequeued2-in-this-gc
0.0
dequeued2-in-this-cycle
0.0
repushed-total
1702117.0
repushed-in-last-gc
0.0
repushed-in-last-cycle
0.0
repushed-in-this-gc
0.0
repushed-in-this-cycle
0.0
finalized-total
1210679.0
finalized-in-last-gc
1567.0
finalized-in-last-cycle
1567.0
finalized-in-this-gc
67466.0
finalized-in-this-cycle
67466.0
freed-total
154944280.0
freed-in-last-gc
1104914.0
freed-in-last-cycle
1104914.0
freed-in-this-gc
3213280.0
freed-in-this-cycle
3213280.0)
(hm, it's gained 5Mb just while I was typing this)
Wow! Open gc.c, and, pop! 800Mb RSS.
Time to send this and restart, I think.
================================================================
System Info to help track down your bug:
---------------------------------------
uname -a: Linux hades 2.6.18.1-skas3-v9-pre9-g7038a9c2-dirty #1 PREEMPT Mon Oct 16 20:46:11 BST 2006 i686 GNU/Linux
/usr/packages/xemacs/21.5.27-20061023/configure '--without-optimization' '--with-dynamic' '--prefix=/usr' '--infodir=${prefix}/info' '--with-infopath=/usr/info' '--with-menubars=lucid' '--with-scrollbars=lucid' '--with-dialogs=lucid' '--with-widgets=lucid' '--with-xft=all' '--with-external-widget' '--with-gpm=no' '--with-sound=alsa' '--with-mule' '--with-mail-locking=flock' '--with-modules' '--with-xim=no' '--without-xfs' '--with-pdump' '--with-newgc' '--with-bignum=gmp' '--with-memory-usage-stats' '--with-assertions' '--with-zlib' '--with-database=berkdb' '--with-postgresql' '--with-error-checking'
XEmacs 21.5-b27 "fiddleheads" (+CVS-20061023) configured for `i686-pc-linux'.
Compilation Environment and Installation Defaults:
Source code location: /usr/packages/xemacs/21.5.27-20061023
Installation prefix: /usr
Operating system description file: `s/linux.h'
Machine description file: `m/intel386.h'
Compiler version: gcc (GCC) 4.1.1
- GCC specs file: /usr/packages.bin/gcc/4.1.1-1/bin/../lib/gcc/i686-pc-linux-gnu/4.1.1/specs
- Compiler command: gcc -Wall -Wno-switch -Wundef -Wsign-compare -Wno-char-subscripts -Wpacked -Wunused-parameter -g -O2 -g -march=athlon-4 -pipe -D__NO_STRING_INLINES -D__NO_MATH_INLINES -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -ffast-math
libc version: 2.4
Relocating allocator for buffers: no
GNU version of malloc: yes
- Using Doug Lea's new malloc from the GNU C Library.
Window System:
Compiling in support for the X window system:
- X Windows headers location:
- X Windows libraries location:
- Handling WM_COMMAND properly.
- Using fontconfig to manage fonts.
- Compiling in support for Xft antialiased fonts (EXPERIMENTAL).
Compiling in support for Motif.
- Using LessTif implementation.
*WARNING* Many versions of Motif are buggy, requiring workarounds.
You are likely to experience slow redisplay.
You may need to install vendor patches to Motif.
See PROBLEMS for more information.
Using Lucid menubars.
- Using Xft to render antialiased fonts in menubars.
WARNING: This feature will be replaced with a face.
Using Lucid scrollbars.
Using Motif dialog boxes.
Using Motif native widgets.
- Using Xft to render antialiased fonts in tab controls.
WARNING: This feature will be replaced with a face.
- Using Xft to render antialiased fonts in progress bars.
WARNING: This feature will be replaced with a face.
WARNING: This feature not yet implemented; setting ignored.
TTY:
Compiling in support for ncurses.
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Compiling in support for X-Face message headers.
Sound:
Compiling in support for sound (native).
Compiling in support for ALSA (Advanced Linux Sound Architecture).
Compiling in support for NAS (network audio system).
Databases:
Compiling in support for Berkeley database.
Compiling in support for PostgreSQL.
- Using PostgreSQL header file: libpq-fe.h
- Using PostgreSQL V7 bindings.
Internationalization:
Compiling in support for Mule (multi-lingual Emacs).
Mail:
Compiling in support for "flock" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for dynamic shared object modules.
Compiling in support for more number types using the GNU MP library.
Using the new GC mark algorithms (KKCC).
WARNING: ---------------------------------------------------------
WARNING: The new algorithms are experimental. They are enabled by
WARNING: default for this release. Use `--disable-kkcc' to
WARNING: turn it off.
WARNING: ---------------------------------------------------------
Using the new incremental garbage collector and the new allocator.
Using POSIX sigaction() to install fault handler.
Using the new portable dumper.
Compiling in support for extra debugging code.
Compiling in support for runtime error checking.
WARNING: ---------------------------------------------------------
WARNING: XEmacs will run noticeably more slowly as a result.
WARNING: Error checking is on by default for XEmacs beta releases.
WARNING: ---------------------------------------------------------
Load-Path Lisp Shadows:
----------------------
(/usr/lib/xemacs/xemacs-packages/lisp/apel/std11
/usr/lib/xemacs/xemacs-packages/lisp/flim/std11
/usr/lib/xemacs/site-packages/lisp/slime/bridge
/usr/lib/xemacs/xemacs-packages/lisp/ilisp/bridge
/usr/lib/xemacs/site-packages/lisp/slime/tree-widget
/usr/lib/xemacs/xemacs-packages/lisp/jde/tree-widget
/usr/lib/xemacs/xemacs-packages/lisp/flim/smtpmail
/usr/lib/xemacs/xemacs-packages/lisp/mail-lib/smtpmail
/usr/lib/xemacs/site-packages/lisp/uncompress
/usr/lib/xemacs/xemacs-packages/lisp/os-utils/uncompress
/usr/lib/xemacs/site-packages/lisp/gettext/po-mode
/usr/lib/xemacs/xemacs-packages/lisp/text-modes/po-mode
/usr/lib/xemacs/site-packages/lisp/gettext/po-compat
/usr/lib/xemacs/xemacs-packages/lisp/text-modes/po-compat
/usr/lib/xemacs/site-packages/lisp/edit-utils/whitespace
/usr/lib/xemacs/xemacs-packages/lisp/text-modes/whitespace
/usr/lib/xemacs/site-packages/lisp/text-modes/filladapt
/usr/lib/xemacs/xemacs-packages/lisp/text-modes/filladapt
/usr/lib/xemacs/xemacs-packages/lisp/flim/mel-g
/usr/lib/xemacs/xemacs-packages/lisp/tm/mel-g
/usr/lib/xemacs/xemacs-packages/lisp/flim/mel-u
/usr/lib/xemacs/xemacs-packages/lisp/tm/mel-u
/usr/lib/xemacs/xemacs-packages/lisp/flim/mel-q
/usr/lib/xemacs/xemacs-packages/lisp/tm/mel-q
/usr/lib/xemacs/xemacs-packages/lisp/flim/mel
/usr/lib/xemacs/xemacs-packages/lisp/tm/mel
/usr/lib/xemacs/mule-packages/lisp/mule-base/korea-util
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/mule/korea-util
/usr/lib/xemacs/mule-packages/lisp/mule-base/japan-util
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/mule/japan-util
/usr/lib/xemacs/mule-packages/lisp/mule-base/ethio-util
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/mule/ethio-util
/usr/lib/xemacs/mule-packages/lisp/mule-base/viet-util
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/mule/viet-util
/usr/lib/xemacs/mule-packages/lisp/mule-base/cyril-util
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/mule/cyril-util
/usr/lib/xemacs/mule-packages/lisp/mule-base/china-util
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/mule/china-util
/usr/lib/xemacs/xemacs-packages/lisp/xemacs-base/regexp-opt
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/regexp-opt
/usr/lib/xemacs/xemacs-packages/lisp/build/build-report
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/build-report
/usr/lib/xemacs/mule-packages/lisp/mule-ucs/unicode
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/unicode
/usr/lib/xemacs/xemacs-packages/lisp/xemacs-base/easy-mmode
/usr/packages.bin/core/xemacs/lib/xemacs-21.5-b27/lisp/easy-mmode)
Installed XEmacs Packages:
-------------------------
(zenirc ver: 1.16 upstream: 2.112)
(xslt-process ver: 1.12 upstream: 1.2.1)
(xslide ver: 1.09 upstream: 0.2.2)
(xetla ver: 1.01 upstream: steve(a)eicq.org--2005/xetla--main--1.1--version-0)
(xemacs-devel ver: 1.75 upstream: No-Upstream-Ver)
(xemacs-base ver: 2.08 upstream: No-Upstream-Ver)
(x-symbol ver: 1.1 upstream: 4.5.1)
(w3 ver: 1.33 upstream: 4.0pre47)
(vm ver: 7.22 upstream: 7.17)
(viper ver: 1.51 upstream: 3.09)
(view-process ver: 1.13 upstream: 2.4)
(vhdl ver: 1.22 upstream: 3.33.12)
(vc ver: 0.05 upstream: No-Upstream-Ver)
(tramp ver: 1.33 upstream: 2.0.54)
(tpu ver: 1.14 upstream: 4.2X)
(tm ver: 1.38 upstream: No-Upstream-Ver)
(time ver: 1.14 upstream: 1.17)
(textools ver: 1.15 upstream: No-Upstream-Ver)
(text-modes ver: 1.9 upstream: No-Upstream-Ver)
(texinfo ver: 1.3 upstream: No-Upstream-Ver)
(supercite ver: 1.21 upstream: 3.55x3)
(strokes ver: 1.1 upstream: No-Upstream-Ver)
(speedbar ver: 1.28 upstream: 0.14beta4)
(slider ver: 1.15 upstream: 0.3x1)
(sieve ver: 1.18 upstream: No-Upstream-Ver)
(sh-script ver: 1.21 upstream: 2.0f)
(sgml ver: 1.11 upstream: No-Upstream-Ver)
(semantic ver: 1.2 upstream: 1.4.4)
(scheme ver: 1.14 upstream: No-Upstream-Ver)
(ruby-modes ver: 1.02 upstream: 1.6.8)
(rmail ver: 1.14 upstream: No-Upstream-Ver)
(riece ver: 1.22 upstream: 2.0.2)
(reftex ver: 1.34 upstream: 4.21)
(re-builder ver: 1.05 upstream: 1.20)
(python-modes ver: 1.08 upstream: No-Upstream-Ver)
(psgml ver: 1.44 upstream: 1.3.1)
(ps-print ver: 1.11 upstream: 6.5.6)
(prog-modes ver: 2.09 upstream: No-Upstream-Ver)
(pgg ver: 1.06 upstream: 0.1)
(perl-modes ver: 1.09 upstream: No-Upstream-Ver)
(pcomplete ver: 1.04 upstream: 1.1.6)
(pcl-cvs ver: 1.67 upstream: R-2_9_9)
(pc ver: 1.28 upstream: No-Upstream-Ver)
(os-utils ver: 1.39 upstream: No-Upstream-Ver)
(oo-browser ver: 1.04 upstream: 4.08)
(ocaml ver: 0.06 upstream: 3.06)
(misc-games ver: 1.18 upstream: No-Upstream-Ver)
(mine ver: 1.16 upstream: 1.9)
(mh-e ver: 1.29 upstream: 7.4.2)
(mew ver: 1.19 upstream: 1.94.2)
(mailcrypt ver: 2.14 upstream: 3.5.8)
(mail-lib ver: 1.77 upstream: No-Upstream-Ver)
(jde ver: 1.51 upstream: 2.3.3)
(ispell ver: 1.32 upstream: 3.6)
(ilisp ver: 1.34 upstream: 5.12.0)
(igrep ver: 1.14 upstream: 2.111)
(idlwave ver: 1.32 upstream: 5.1)
(ibuffer ver: 1.09 upstream: No-Upstream-Ver)
(hyperbole ver: 1.16 upstream: 4.18)
(hm--html-menus ver: 1.23 upstream: 5.9)
(haskell-mode ver: 1.1 upstream: 2.1)
(gnats ver: 1.17 upstream: 3.101)
(generic-modes ver: 0.99 upstream: No-Upstream-Ver)
(games ver: 1.17 upstream: 1.04)
(fsf-compat ver: 1.15 upstream: No-Upstream-Ver)
(fortran-modes ver: 1.05 upstream: No-Upstream-Ver)
(forms ver: 1.15 upstream: 2.37)
(footnote ver: 1.16 upstream: 0.18x)
(flim ver: 1.1 upstream: 1.14.4)
(eudc ver: 1.39 upstream: 1.32)
(eterm ver: 1.17 upstream: No-Upstream-Ver)
(eshell ver: 1.1 upstream: 2.4.1)
(escreen ver: 1.01 upstream: 1.16)
(emerge ver: 1.11 upstream: No-Upstream-Ver)
(eieio ver: 1.05 upstream: 0.17)
(efs ver: 1.33 upstream: 1.23)
(edt ver: 1.13 upstream: No-Upstream-Ver)
(edit-utils ver: 2.36 upstream: No-Upstream-Ver)
(ediff ver: 1.64 upstream: 2.75)
(edebug ver: 1.21 upstream: No-Upstream-Ver)
(ecrypto ver: 0.2 upstream: 2.0)
(ecb ver: 1.22 upstream: 2.31)
(docbookide ver: 0.07000000000000001 upstream: 0.1)
(dired ver: 1.17 upstream: 7.13)
(dictionary ver: 1.16 upstream: 1.8)
(debug ver: 1.18 upstream: No-Upstream-Ver)
(cookie ver: 1.15 upstream: No-Upstream-Ver)
(clearcase ver: 1.1 upstream: /main/laptop/165)
(cc-mode ver: 1.45 upstream: 5.30.10)
(calendar ver: 1.26 upstream: No-Upstream-Ver)
(calc ver: 1.26 upstream: 2.02fX3)
(c-support ver: 1.22 upstream: No-Upstream-Ver)
(build ver: 1.14 upstream: 2.02)
(bbdb ver: 1.29 upstream: 2.34)
(auctex ver: 1.46 upstream: 11.55)
(apel ver: 1.32 upstream: 10.6)
(ada ver: 1.14 upstream: 2.27)
(skk ver: 1.23 upstream: 10.62a)
(mule-ucs ver: 1.14 upstream: 0.84)
(mule-base ver: 1.48 upstream: No-Upstream-Ver)
(lookup ver: 1.15 upstream: 1.0)
(leim ver: 1.24 upstream: No-Upstream-Ver)
(latin-unity ver: 1.19 upstream: 1.19)
(egg-its ver: 1.27 upstream: No-Upstream-Ver)
(edict ver: 1.16 upstream: 0.9.9)
(site-prog-modes ver: 1.0 upstream: single-file)
(preview ver: 2002.1216 upstream: regular)
(octave ver: 0.8 upstream: regular)
(site-misc ver: 1.01 upstream: single-file)
(matlab ver: 2.22 upstream: single-file)
(gnuplot-mode ver: 0.1 upstream: regular)
(site-games ver: 1.0 upstream: single-file)
Installed Modules:
-----------------
Features:
--------
(xemacsbug shadow ielm htmlize find-func view-less view hyper-apropos
gnus-fun symbol-syntax tags etags latin-unity-tables
latin-euro-standards latin-euro-latin10 latin-euro-latin9
latin-euro-latin8 latin-euro-latin7 latin-unity-vars latin-unity
flow-fill annotations bbdb-gui gnus-picon sort gnus-cite gnus-agent
gnus-srvr nnvirtual gnus-async gnus-bcklg gnus-salt gnus-score
score-mode gnus-dup gnus-ml gnus-msg disp-table gnus-topic url-gw
url-misc url-cache url-http url-cookie urlauth w3-vars w3-keyword w3-cus
nnrss xml mm-url url mm mule-sysdp url-parse url-vars gnus-cache nnml
nndraft nnmh bbdb-gnus bbdb-snarf gnus-demon nntp dot-gnus-mail gnus-art
mm-uu mml2015 pgg pgg-parse pgg-def mm-view gnus-sum nnoo gnus-group
gnus-undo nnmail mail-source dot-gnus-articles dot-gnus-sa dot-gnus-bbdb
dot-gnus-colourization tc overlay mail-extr gnus-start gnus-spec
gnus-int gnus-range gnus-win gnus gnus-ems gnus-xmas wid-edit parse-time
vc-cvs cperl-mode checkdoc eldoc cc-mode cc-fonts cc-menus dired-faces
dired-xemacs dired tramp-vc vc-rcs vc vc-svn lazy-shot sh-script info
miniedit edmacro init-message-modes vc-git bbdb-expire bbdb-hooks
bbdb-w3 browse-url bbdb-com silly-mail boxquote rect message messagexmas
idna mml mml-sec mml-smime smime dig mm-decode mm-bodies mm-encode
mailcap lpr mail-parse rfc2045 rfc2231 rfc2047 qp ietf-drums
mail-abbrevs sendmail rfc822 nnheader nnheaderxm gnus-util netrc
time-date mm-util mail-prsvr mail-utils mailheader canlock sha1 hex-util
init-prog-modes paren blink-paren cc-cmds cc-styles cc-align cc-engine
cc-vars cc-defs fff-rfc fff-elisp fff func-menu type-break hack-locals
balloon-help icomplete nixlist gawd-keys x-compose gawd-mode-frobs
tramp-smb tramp efs-cu executable shell password format-spec trampver
uptimes timer-funcs timer pp comint term ehelp electric hideshow
filladapt gawd-faces gawd-misc gnuserv gawd-lists scroll-in-place bbdb
regexp-opt desktop generic-x generic vi-dot byte-optimize bytecomp
byte-compile uniquify tex-site vc-hooks vc-xemacs time font-lock
cus-face advice advice-preload zenirc-autoloads xwem-autoloads
xslt-process-autoloads xslide-autoloads xlib-autoloads xetla-autoloads
xemacs-devel-autoloads xemacs-base-autoloads x-symbol-autoloads
w3-autoloads vm-autoloads viper-autoloads view-process-autoloads
vhdl-autoloads vc-autoloads tramp-autoloads tpu-autoloads tm-autoloads
time-autoloads textools-autoloads text-modes-autoloads texinfo-autoloads
supercite-autoloads strokes-autoloads speedbar-autoloads
slider-autoloads sieve-autoloads sh-script-autoloads sgml-autoloads
semantic-autoloads scheme-autoloads ruby-modes-autoloads rmail-autoloads
riece-autoloads reftex-autoloads re-builder-autoloads
python-modes-autoloads psgml-autoloads ps-print-autoloads
prog-modes-autoloads pgg-autoloads perl-modes-autoloads
pcomplete-autoloads pcl-cvs-autoloads pc-autoloads os-utils-autoloads
oo-browser-autoloads ocaml-autoloads net-utils-autoloads
misc-games-autoloads mine-autoloads mh-e-autoloads mew-autoloads
mailcrypt-autoloads mail-lib-autoloads jde-autoloads ispell-autoloads
ilisp-autoloads igrep-autoloads idlwave-autoloads ibuffer-autoloads
hyperbole-autoloads hm--html-menus-autoloads haskell-mode-autoloads
gnus-autoloads gnats-autoloads generic-modes-autoloads games-autoloads
fsf-compat-autoloads fortran-modes-autoloads forms-autoloads
footnote-autoloads flim-autoloads eudc-autoloads eterm-autoloads
eshell-autoloads escreen-autoloads erc-autoloads emerge-autoloads
eieio-autoloads efs-autoloads edt-autoloads edit-utils-autoloads
ediff-autoloads edebug-autoloads ecrypto-autoloads ecb-autoloads
docbookide-autoloads dired-autoloads dictionary-autoloads
debug-autoloads cookie-autoloads clearcase-autoloads cc-mode-autoloads
calendar-autoloads calc-autoloads c-support-autoloads build-autoloads
bbdb-autoloads auctex-autoloads apel-autoloads ada-autoloads
skk-autoloads mule-ucs-autoloads mule-base-autoloads lookup-autoloads
leim-autoloads latin-unity-autoloads egg-its-autoloads edict-autoloads
site-w3m-autoloads site-text-modes-autoloads site-slime-autoloads
site-prog-modes-autoloads site-preview-autoloads site-planner-autoloads
site-octave-autoloads site-muse-autoloads site-misc-autoloads
site-matlab-autoloads site-lisp-devel-autoloads site-hyphen-autoloads
site-gnuplot-autoloads site-games-autoloads site-edit-utils-autoloads
site-lisp-autoloads modules-autoloads mule-autoloads auto-autoloads
winring ring timezone uncompress completer saveplace redo rsz-minibuf
auto-show fontl-hooks canna-leim tibetan lao devanagari indian slovenian
czech romanian ccl code-cmds gutter-items menubar-items x-menubar
mode-motion mouse behavior itimer auto-save lisp-mode easymenu
easy-mmode iso8859-1 page buff-menu lib-complete loadhist cus-file
derived newcomment env text-props fontconfig frame obsolete cus-start
custom widget cl-extra cl cl-19 packages backquote unicode font-mgr
lucid-scrollbars cut-buffer xft-fonts lucid-menubars external-widget
motif-dialogs x c-balloon-help tty-frames tty toolbar nas-sound
native-sound alsa-sound scrollbar unix-processes multicast
network-streams subprocesses bigfloat ratio bignum number-types modules
menu-accelerator-support menubar berkeley-db md5 xemacs mule gutter tiff
png gif jpeg xface xpm xbm lisp-float-type file-coding linux dialog
devices window-system base64)
Recent keystrokes:
-----------------
RET RET C-x 1 down down down down down down down down
down down down down down down down down down down down
down down up RET n M H C-x 1 down down down down down
down down down down down down down down down up up
up up right right right right right right down BS M
H C-x 1 down up n n C-x 1 down down down up RET M H
C-x C-g M-x i e l m RET M-x i C-g M-x r e p o r t -
e BS x e TAB RET
Recent messages (most recent first):
-----------------------------------
Loading xemacsbug...done
Loading xemacsbug...
Quit
IELM Mode doesn't support Hideshow Minor Mode
Loading ielm...done
Loading ielm...
C-x C-g not defined.
End of message
End of message
End of message
End of message
End of message
End of message
End of message
End of message
Quit
Wrote /home/nix/doc/to-build
Quit: isearch
End of message
End of message
--
`When we are born we have plenty of Hydrogen but as we age our
Hydrogen pool becomes depleted.'
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta
- 3 participants
- 6 comments
Re: decoders writing control-1 chars?
18 years
Aidan Kehoe
Aidan Kehoe
Ar an triochadú lá de mí Deireadh Fómhair, scríobh Ilya N. Golubev:
> On 2005/11/28 02:10:19 +0 Vin Shelton committed in "stable"
> `release-21-4' branch this change.
>
> 2005-04-05 Aidan Kehoe <kehoea(a)parhasard.net>
>
> * mule-ccl.c (ccl_driver): Calculate the charset and position code
> for control-1 characters properly, both when reading multibyte
> characters and writing them.
>
> This changes what `write-multibyte-character' CCL instruction writes
> when passed a representation of `control-1' charset character. So the
> change is obviously visible to lisp programmer. Still it is not noted
> in `NEWS' file.
>
> `control-1' emchars are just like any others, and coding systems
> decoding data to these emchars certainly make sense. How do we
> implement such a coding systems in CCL? Assume that CCL program have
> prepared generic emchar representation for `write-multibyte-character'
> in its registers, and this emchar may be or not be in `control-1'
> charset. How do we have it write `control-1' emchar out after that
> change?
>
> Another issue is that emchar value being written out for `(control-1
> CODE)' chars, 0 <= CODE < 32, is negative, which makes little sense.
Where do you see this?
> Please resolve the issue. Perhaps you decide to revert the change.
> Or perhaps you devise and recommend the workaround. Then please note
> the change in <Lisp and internal changes> section of `NEWS' with
> stating how to work around that, how to write `control-1' emchars out.
Thank you for the report, Ilya. The intention was that the change would
bring the CCL interpreter into line with the documentation, but after
superficial investigation, it looks like write-multibyte-character does
nothing useful when control-1’s charset ID and a corresponding character ID
are specified as its arguments.
But, CCL is underdocumented and not easy to test, and it’s a year or more
since I wrote that code (it had been in 21.5 for a long time before being
integrated into 21.4), so I need to look a little harder to be sure that I
understand what was intended and what’s going wrong before doing anything.
--
Santa Maradona, priez pour moi!
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta
- 1 participants
- 0 comments
defering indent upon newline
18 years
Tim Connors
Tim Connors
In perl-mode with font-lock on, when you have whitespace at the end of
line, including when you have just indented, you end up with an ugly
underline. This is of course intentional, to encourage you to get rid of
wasted whitespace.
But, if you have newline-and-indent turned on, you get whitespace
automatically, and this only gets removed if you put in more newlines.
If you want to seperate a block by newlines either side, you have to
juggle the cursor all over the place before you end up with two blank
lines, and a line in the middle indented correctly. And you can't just
kill the whitespace on an otherwise blank line with ctrl-k, because it
kills the entire line including the newline.
So, in light of this, does it make sense to defer the indenting of the
current line until a character is actually input on that line? Anyone
with with any elisp skills got an idea of how to do that?
--
Tim Connors
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta
- 2 participants
- 2 comments