Crash/Segmentation Violation with Wnn6 on Solaris 8 OS
22 years, 7 months
Anthony Toigo
Anthony Toigo
This bug report will be sent to the XEmacs Development Team,
not to your local site managers!!
Please write in English, because the XEmacs maintainers do not have
translators to read other languages for them.
Please describe as succinctly as possible:
- What happened.
- What you thought should have happened.
- Precisely what you were doing at the time.
Please also include any C or lisp back-traces that you may have.
================================================================
Dear Bug Team!
I tried compiling xemacs v.21.5.4 with Wnn6 capabilities on a Sun Blade
100/Solaris 8 computer. I compiled with the Wnn6 option so that I could
send e-mail (with the vm program) in Japanese. However, I do not want
xemacs in a "Japanese language" mode, i.e., I don't want all the menus and
information appearing as Japanese text. I am not Japanese, but I
have many colleagues who are, and it is convenient to write to them
directly in Japanese. So I only want Wnn6 to use to convert my occaisional
e-mails into Japanese characters.
Xemacs compiled nicely, and I even got it to start up. But as soon as I
tried to start some Japanese character writing, I got a fatal error. My
method was as follows:
% xemacs
Then within xemacs, without visiting any files, but from the *scratch*
buffer in Fundamental mode:
C-\
Input-method: japanese-egg-wnn
And then I start typing. The entering of phonetic characters (kana) works
fine. It is when I try to convert from phonetic characters (kana) to the
ideograph characters (kanji) that the error occurs, and xemacs shuts down
with a segmentation fault.
Any advice you can offer would be greatly appreciated. Thanks for your
help.
-Anthony Toigo
Lisp backtrace follows:
wnn-server-fisys-dict-add("iwanami/fisd" "usr/toigo/fisd.h" t nil)
# bind (hpaswd hmode hfile dfile)
add-wnn-fisys-dict("iwanami/fisd" "usr/toigo/fisd.h" t)
wnn6-jserver-setup()
(if (is-wnn6-server) (wnn6-jserver-setup) (wnn4-jserver-setup))
(cond ((eq wnn-server-type ...) (if ... ... ...)) ((eq wnn-server-type ...) (set-wnn-reverse nil) (set-wnn-fuzokugo "sys/full.con") (add-wnn-dict "sys/level_1.dic" ... 4 nil t) (add-wnn-dict "sys/level_2.dic" ... 1 nil t) (add-wnn-dict "sys/basic.dic" ... 7 nil t) (add-wnn-dict ... "" 5 t t) (wnn-server-set-param ...) (set-wnn-reverse t) (set-wnn-fuzokugo "sys/full.con") (add-wnn-dict "sys/level_1.dic" ... 4 nil t) (add-wnn-dict "sys/level_2.dic" ... 1 nil t) (add-wnn-dict "sys/basic.dic" ... 7 nil t) (add-wnn-dict ... "" 5 t t) (wnn-server-set-param ...)) ((eq wnn-server-type ...) (set-wnn-reverse nil) (set-wnn-fuzokugo "sys/full.con") (add-wnn-dict "sys/cns_ch.dic" ... 4 nil t) (add-wnn-dict "sys/cns_wd.dic" ... 1 nil t) (add-wnn-dict ... "" 5 t t) (wnn-server-set-param ...) (set-wnn-reverse t) (set-wnn-fuzokugo "sys/full.con") (add-wnn-dict "sys/cns_ch.dic" ... 4 nil t) (add-wnn-dict "sys/cns_wd.dic" ... 1 nil t) (add-wnn-dict ... "" 5 t t) (wnn-server-set-param ...)) (!
(eq wnn-server-type ...) (set-wnn-reverse nil) (set-wnn-fuzokugo "sys/full.fzk") (add-wnn-dict "sys/single.dic" ... 1 nil t) (add-wnn-dict ... "" 5 t t) (wnn-server-set-param ...) (set-wnn-reverse t) (set-wnn-fuzokugo "sys/full.fzk") (add-wnn-dict "sys/single.dic" ... 1 nil t) (add-wnn-dict ... "" 5 t t) (wnn-server-set-param ...)))
# bind (current-load-list)
# (unwind-protect ...)
# bind (load-file-name)
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
load-internal("/home/astrosun/toigo/local/lib/xemacs/mule-packages/lisp/egg-its/eggrc-wnn" nil nil t undecided)
# bind (path handler filename nosuffix nomessage noerror file)
load("/home/astrosun/toigo/local/lib/xemacs/mule-packages/lisp/egg-its/eggrc-wnn" nil nil t)
# bind (file)
load-file("/home/astrosun/toigo/local/lib/xemacs/mule-packages/lisp/egg-its/eggrc-wnn")
# bind (eggrc path host)
EGG:open-wnn()
# (unwind-protect ...)
# bind (finished rev end start)
henkan-region-internal(#<marker at 396 in *scratch* 0x660b64> #<marker at 400 in *scratch* 0x660b7c>)
henkan-fence-region()
#<compiled-function nil "...(9)" [egg:*input-mode* henkan-fence-region ?\ ] 1 nil nil>()
call-interactively(henkan-fence-region-or-single-space)
# (condition-case ... . error)
# (catch top-level ...)
[1] Segmentation fault ./xemacs (core dumped)
Back-trace from core file follows:
(dbx) where
=>[1] _kill(0x0, 0xb, 0xfe63cc98, 0x3c1800, 0x20a88, 0x99890), at 0xfea9bed4
[2] fatal_error_signal(0xb, 0x0, 0xffbeb218, 0xfeab801c, 0x0, 0x0), at 0x99890
[3] sigacthandler(0xb, 0x0, 0xffbeb218, 0x7efefeff, 0x81010100, 0x3c01c5), at 0xfea9af1c
---- called from signal handler with signal 11 (SIGSEGV) ------
[4] strlen(0x0, 0x0, 0x0, 0x7efefeff, 0x81010100, 0x3c01c5), at 0xfea33084
[5] _doprnt(0x0, 0xffbec1b4, 0x0, 0x2f11f1, 0x0, 0x2d06ee), at 0xfea82c50
[6] sprintf(0x7fffffff, 0x2d06ec, 0x0, 0x6bcd98, 0x0, 0x0), at 0xfea84a18
[7] jl_fi_dic_add_e_body(0x0, 0xf6b24, 0xf6e34, 0x2, 0x0, 0x0), at 0x28da34
[8] jl_fi_dic_add(0x6a9800, 0x6af9c8, 0x6bcd98, 0x6, 0x1, 0x0), at 0x28de78
[9] Fwnn_fisys_dict_add(0x3b8b28, 0xf6800, 0xfffffffe, 0xffbec7e8, 0xf5650, 0x3c1800), at 0xf57d4
[10] Ffuncall(0x4, 0xffbec5b4, 0xfe634e80, 0x24, 0xffbec5b4, 0xffbec758), at 0xa43d0
[11] execute_optimized_program(0x643e1a, 0x4, 0x10, 0x3c1c00, 0x64d5d0, 0x1d), at 0x685d4
[12] funcall_compiled_function(0x663804, 0x3, 0x29b000, 0x19, 0x29ac00, 0x6), at 0x6806c
[13] Feval(0xffbec758, 0x3c0c00, 0x3c1800, 0x2f7c00, 0x3c1c00, 0xffbec8d8), at 0xa3444
[14] funcall_lambda(0xffbec884, 0xffbeccb8, 0x6a9250, 0x6, 0xfe63d118, 0x6), at 0xa4d94
[15] Feval(0x3c0c00, 0xfe63d118, 0x3c1800, 0x2f7c00, 0x3c1c00, 0xfe63a8f8), at 0xa32e0
[16] Feval(0x2, 0x19, 0x3c1800, 0x2f7c00, 0x3c1c00, 0x3c1c00), at 0xa38e4
[17] Fprogn(0x6bb394, 0x0, 0x4, 0x2f7c00, 0x2a2c00, 0xfe63d118), at 0xa9944
[18] Fcond(0xfe63d118, 0x5, 0x3e2c00, 0xfe63d118, 0x1, 0x0), at 0x9e5a0
[19] Feval(0x0, 0x19, 0x3c1800, 0x2f7c00, 0x3c1c00, 0x3c1c00), at 0xa38e4
[20] readevalloop(0x5ec800, 0x3e2c00, 0xa2e08, 0x0, 0x0, 0x18), at 0x1a8d3c
[21] Fload_internal(0x3bc400, 0x3bc400, 0x3e2c00, 0x3bc400, 0x0, 0xfe63d118), at 0x1a6f64
[22] Ffuncall(0x9d9d8, 0xa4270, 0x0, 0x25, 0x12, 0x4), at 0xa42cc
[23] execute_optimized_program(0xfe69a3ec, 0x5, 0x14, 0x3c1c00, 0xfe79b630, 0xe), at 0x685d4
[24] funcall_compiled_function(0xfe7bfc34, 0x4, 0x29b000, 0xa, 0x29ac00, 0x3c1800), at 0x6806c
[25] Ffuncall(0x4, 0xffbed5cc, 0xfe63cc98, 0x24, 0xffbed5cc, 0xffbed830), at 0xa4128
[26] execute_optimized_program(0x61a218, 0x4, 0x10, 0x3c1c00, 0xfe793118, 0xa), at 0x685d4
[27] funcall_compiled_function(0xfe7bc798, 0x1, 0x29b000, 0x9, 0x29ac00, 0x3c1800), at 0x6806c
[28] Ffuncall(0x1, 0xffbed824, 0xfe627de8, 0x21, 0xfe6036f8, 0x9), at 0xa4128
[29] execute_optimized_program(0x64a9bc, 0x1, 0x4, 0x3c1c00, 0x624f10, 0x6), at 0x685d4
[30] funcall_compiled_function(0x663aa4, 0x0, 0x29b000, 0x6, 0x29ac00, 0x3c1800), at 0x6806c
[31] Ffuncall(0x0, 0xffbeda74, 0x6623f4, 0x20, 0x3, 0xfe6036f8), at 0xa4128
[32] execute_optimized_program(0x647b22, 0x0, 0x0, 0x3c1c00, 0x5ff210, 0x4), at 0x685d4
[33] funcall_compiled_function(0x663c64, 0x2, 0x29b000, 0x1, 0x29ac00, 0x3c1800), at 0x6806c
[34] Ffuncall(0x2, 0xffbedccc, 0x62e514, 0x22, 0x4, 0xffbedf20), at 0xa4128
[35] execute_optimized_program(0x61a839, 0x2, 0x8, 0x3c1c00, 0x5f7310, 0x1), at 0x685d4
[36] funcall_compiled_function(0x5d9b68, 0x0, 0x29b000, 0x1, 0x29ac00, 0x3c1800), at 0x6806c
[37] Ffuncall(0x0, 0xffbedf1c, 0x5d9604, 0x20, 0xffbedf1c, 0xffbee500), at 0xa4128
[38] execute_optimized_program(0x61a8b5, 0x0, 0x0, 0x3c1c00, 0x61ad10, 0x1), at 0x685d4
[39] funcall_compiled_function(0x5d9b4c, 0x0, 0x29b000, 0x1, 0x29ac00, 0x3c1800), at 0x6806c
[40] Ffuncall(0x0, 0xffbee1cc, 0x3c1800, 0x3c1800, 0x5d9b4c, 0xffbee160), at 0xa4128
[41] apply1(0x5d9b4c, 0xfe63d118, 0x21, 0x2f7c00, 0xfe6036f8, 0xfe63d118), at 0xa8dd4
[42] Fcall_interactively(0xfe63d118, 0xffbee520, 0xffbee268, 0xffbee658, 0x3c1800, 0xfe63d118), at 0x6ea44
[43] Fcommand_execute(0xffbee5d0, 0xfe63d118, 0xfe63d118, 0x0, 0x1, 0x2b1c00), at 0xa29b4
[44] execute_command_event(0x509400, 0x3c2000, 0x0, 0xfe63d118, 0x4, 0x3c2000), at 0x115478
[45] Fdispatch_event(0x5c93a4, 0xffbee768, 0x0, 0x3c1800, 0xfe63d118, 0x18), at 0x115e50
[46] Fcommand_loop_1(0x0, 0x3c1c00, 0x3c1c00, 0x3e2c00, 0x3c1400, 0x3c2000), at 0x7a590
[47] condition_case_1(0x7a954, 0x1, 0xffbee830, 0x7a954, 0xffbee820, 0xfe71d294), at 0xa0248
[48] command_loop_2(0xfe63d118, 0x0, 0x0, 0x3c1800, 0x0, 0xfe63d118), at 0x7aa70
[49] internal_catch(0xfe607448, 0x7aa20, 0x7aa20, 0x3c0c00, 0x3c1400, 0x22), at 0x9ff60
[50] initial_command_loop(0x3c1400, 0x3c1800, 0x3e2c00, 0x29cc00, 0x29cc00, 0x1), at 0x79c6c
[51] xemacs_21_5_b4_sparc_sun_solaris2_8(0x3f3544, 0x1, 0x1, 0x40, 0x2a1000, 0x3c1800), at 0x9b8a0
[52] main(0x1, 0xffbeec04, 0x2f7c00, 0x2f22c4, 0x0, 0x0), at 0x9bff0
================================================================
System Info to help track down your bug:
---------------------------------------
uname -a: SunOS snow 5.8 Generic_108528-12 sun4u sparc SUNW,Sun-Blade-100
./configure '--site-includes=/home/astrosun/toigo/local/include /usr/lib/locale/ja/wnn/demo/include/' '--site-libraries=/home/astrosun/toigo/local/lib /usr/lib/locale/ja/wnn/demo/lib' '--with-gcc' '--prefix=/home/astrosun/toigo/local' '--with-mule' '--with-canna' '--with-wnn6' '--with-sparcworks' '--pdump'
XEmacs 21.5-b4 "bamboo" configured for `sparc-sun-solaris2.8'.
Compilation / Installation:
Source code location: /home/astrosun/toigo/local/src/xemacs-21.5.4
Installation prefix: /home/astrosun/toigo/local
Additional header files: /home/astrosun/toigo/local/include /usr/lib/locale/ja/wnn/demo/include/
Additional libraries: /home/astrosun/toigo/local/lib /usr/lib/locale/ja/wnn/demo/lib
Runtime library search path: /usr/ccs/lib:/home/astrosun/toigo/local/lib:/usr/dt/lib:/usr/openwin/lib:/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0.1/../../..
Operating system description file: `s/sol2.h'
Machine description file: `m/sparc.h'
Compiler: gcc -g -O3 -Wall -Wno-switch -Winline -Wmissing-prototypes -Wsign-compare -Wshadow -Wpointer-arith
Relocating allocator for buffers: yes
GNU version of malloc: yes
Window System:
Compiling in support for the X window system:
- X Windows headers location: /usr/dt/include /usr/openwin/include
- X Windows libraries location: /usr/dt/lib /usr/openwin/lib
- Handling WM_COMMAND properly.
Using Lucid menubars.
Using Lucid scrollbars.
Using Motif dialog boxes.
Using Motif native widgets.
TTY:
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Sound:
Compiling in support for sound (native).
Databases:
Compiling in support for GNU DBM.
Compiling in support for LDAP.
Internationalization:
Compiling in support for Mule (multi-lingual Emacs).
Compiling in support for XIM (X11R5+ I18N input method).
- Using Motif to provide XIM support.
Compiling in support for Canna on Mule.
Compiling in support for the WNN input method on Mule.
- Using WNN version 6.
Mail:
Compiling in support for "dot-locking" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for ToolTalk.
Compiling in support for Sun WorkShop.
Compiling in support for dynamic shared object modules.
Using the new portable dumper.
Compiling in support for extra debugging code.
WARNING: ---------------------------------------------------------
WARNING: Compiling in support for runtime error checking.
WARNING: XEmacs will run noticeably more slowly as a result.
WARNING: Error checking is on by default for XEmacs beta releases.
WARNING: ---------------------------------------------------------
Load-Path Lisp Shadows:
----------------------
(/home/astrosun/toigo/local/lib/xemacs/xemacs-packages/lisp/os-utils/lpr
/home/astrosun/toigo/local/lib/xemacs/xemacs-packages/lisp/ps-print/lpr
/home/astrosun/toigo/local/lib/xemacs/xemacs-packages/lisp/ps-print/ps-print
/home/astrosun/toigo/local/lib/xemacs/xemacs-packages/lisp/ps-print-nomule/ps-print
/home/astrosun/toigo/local/lib/xemacs/xemacs-packages/lisp/vc-cc/tq
/home/astrosun/toigo/local/lib/xemacs/xemacs-packages/lisp/xemacs-base/tq)
Installed XEmacs Packages:
-------------------------
((zenirc:version 1.13 :type regular)
(xslt-process :version 1.06 :type regular)
(xemacs-devel :version 1.4 :type single-file)
(xemacs-base :version 1.57 :type regular)
(w3 :version 1.21 :type regular)
(vm :version 7.02 :type regular)
(viper :version 1.31 :type regular)
(view-process :version 1.11 :type regular)
(vhdl :version 1.15 :type regular)
(vc-cc :version 1.18 :type regular)
(vc :version 1.3 :type regular)
(tramp :version 1.01 :type regular)
(tpu :version 1.12 :type regular)
(tooltalk :version 1.13 :type regular)
(tm :version 1.3 :type regular)
(time :version 1.11 :type regular)
(textools :version 1.12 :type regular)
(text-modes :version 1.36 :type single-file)
(texinfo :version 1.2 :type regular)
(supercite :version 1.19 :type regular)
(strokes :version 1.08 :type regular)
(speedbar :version 1.22 :type regular)
(sounds-wav :version 1.1 :type regular)
(sounds-au :version 1.1 :type regular)
(slider :version 1.13 :type regular)
(sieve :version 1.01 :type regular)
(sh-script :version 1.13 :type regular)
(sgml :version 1.08 :type regular)
(semantic :version 1.11 :type regular)
(scheme :version 1.11 :type regular)
(rmail :version 1.13 :type regular)
(reftex :version 1.24 :type regular)
(psgml :version 1.26 :type regular)
(ps-print-nomule :version 1.05 :type regular)
(ps-print :version 1.02 :type regular)
(prog-modes
:version
1
.49
:type
single-file)
(pcomplete :version 1.01 :type regular)
(pcl-cvs :version 1.57 :type regular)
(pc :version 1.21 :type single-file)
(os-utils :version 1.26 :type single-file)
(net-utils :version 1.23 :type single-file)
(misc-games :version 1.15 :type single-file)
(mine :version 1.14 :type regular)
(mh-e :version 1.14 :type regular)
(mew :version 1.16 :type regular)
(mailcrypt :version 2.11 :type regular)
(mail-lib :version 1.42 :type regular)
(jde :version 1.31 :type regular)
(ispell :version 1.24 :type regular)
(ilisp :version 1.2 :type regular)
(igrep :version 1.08 :type regular)
(idlwave :version 1.24 :type regular)
(hm--html-menus :version 1.17 :type regular)
(gnus :version 1.58 :type regular)
(gnats :version 1.13 :type regular)
(games :version 1.13 :type regular)
(fsf-compat :version 1.09 :type single-file)
(frame-icon :version 1.09 :type regular)
(forms :version 1.14 :type regular)
(footnote :version 1.13 :type regular)
(eudc :version 1.35 :type regular)
(eterm :version 1.13 :type regular)
(eshell :version 1.02 :type regular)
(emerge :version 1.09 :type regular)
(elib :version 1.1 :type single-file)
(eieio :version 1.02 :type regular)
(efs :version 1.27 :type regular)
(edt :version 1.12 :type regular)
(edit-utils :version 1.75 :type single-file)
(ediff :version 1.35 :type regular)
(edebug :version 1.14 :type regular)
(dired :version 1.11 :type regular)
(dictionary :version 1.06 :type regular)
(debug :version 1.14 :type regular)
(crisp :version 1.12 :type regular)
(cookie :version 1.13 :type regular)
(clearcase :version 1.02 :type regular)
(cc-mode :version 1.27 :type regular)
(calendar :version 1.18 :type regular)
(calc :version 1.18 :type regular)
(c-support :version 1.16 :type single-file)
(build :version 1.05 :type regular)
(bbdb :version 1.17 :type regular)
(auctex :version 1.29 :type regular)
(apel :version 1.2 :type regular)
(ada :version 1.1 :type regular)
(Sun :version 1.13 :type regular)
(skk :version 1.2 :type regular)
(mule-ucs :version 1.01 :type regular)
(mule-base :version 1.39 :type regular)
(lookup :version 1.09 :type regular)
(locale :version 1.18 :type regular)
(leim :version 1.17 :type regular)
(egg-its :version 1.26 :type regular)
(edict :version 1.12 :type regular))
Features:
--------
(mail-abbrevs xemacsbug shadow sendmail rfc822 font-lock cus-face
zenirc-autoloads xslt-process-autoloads xemacs-devel-autoloads
xemacs-base-autoloads w3-autoloads vm-autoloads viper-autoloads
view-process-autoloads vhdl-autoloads vc-cc-autoloads vc-autoloads
tramp-autoloads tpu-autoloads tooltalk-autoloads tm-autoloads
time-autoloads textools-autoloads text-modes-autoloads texinfo-autoloads
supercite-autoloads strokes-autoloads speedbar-autoloads
sounds-wav-autoloads sounds-au-autoloads slider-autoloads sieve-autoloads
sh-script-autoloads sgml-autoloads semantic-autoloads scheme-autoloads
rmail-autoloads reftex-autoloads psgml-autoloads ps-print-nomule-autoloads
ps-print-autoloads prog-modes-autoloads pcomplete-autoloads
pcl-cvs-autoloads pc-autoloads os-utils-autoloads net-utils-autoloads
misc-games-autoloads mine-autoloads mh-e-autoloads mew-autoloads
mailcrypt-autoloads mail-lib-autoloads jde-autoloads ispell-autoloads
ilisp-autoloads igrep-autoloads idlwave-autoloads hm--html-menus-autoloads
gnus-autoloads gnats-autoloads games-autoloads fsf-compat-autoloads
frame-icon-autoloads forms-autoloads footnote-autoloads eudc-autoloads
eterm-autoloads eshell-autoloads emerge-autoloads elib-autoloads
eieio-autoloads efs-autoloads edt-autoloads edit-utils-autoloads
ediff-autoloads edebug-autoloads dired-autoloads dictionary-autoloads
debug-autoloads crisp-autoloads cookie-autoloads clearcase-autoloads
cc-mode-autoloads calendar-autoloads calc-autoloads c-support-autoloads
build-autoloads bbdb-autoloads auctex-autoloads apel-autoloads
ada-autoloads Sun-autoloads skk-autoloads mule-ucs-autoloads
mule-base-autoloads lookup-autoloads locale-autoloads leim-autoloads
egg-its-autoloads edict-autoloads src-autoloads loadhist auto-show
fontl-hooks x-iso8859-1 canna-leim slovenian czech romanian ccl mule-help
code-cmds gutter-items menubar-items x-menubar mode-motion mouse itimer
auto-save lisp-mode easymenu iso8859-1 page buff-menu lib-complete cus-file
derived frame text-props obsolete cus-start custom widget cl-extra mini-cl
cl cl-19 packages backquote very-early-lisp sparcworks tooltalk CANNA
file-coding wnn mule lucid-scrollbars cut-buffer lucid-menubars
motif-dialogs x c-balloon-help tty-frames tty toolbar native-sound
scrollbar unix-processes multicast network-streams subprocesses modules
menu-accelerator-support menubar dbm md5 xemacs xim gutter tiff png gif
jpeg xpm xbm lisp-float-type usg-unix-v dialog devices window-system
base64)
Recent keystrokes:
-----------------
misc-user
Recent messages (most recent first):
-----------------------------------
Parsing /home/astrosun/toigo/.mailrc...
Loading xemacsbug...done
Loading xemacsbug...
Loading cus-face...done
Loading cus-face...
- 1 participants
- 0 comments
Re: gnuclient *feature* -- crash when frames lose X connection
22 years, 7 months
Hrvoje Niksic
Hrvoje Niksic
Jeff Mincy <jeff(a)delphioutpost.com> writes:
> I just spent, oh maybe, 5 minutes looking at the source. I don't
> see how it could do anything other than loop.
>
> It looks like x_IO_error_handler is called, sets
> DEVICE_X_BEING_DELETED (as you stated), then throws to top level,
> which is inside of an infinite for loop.
Yes, but that infinite for loop calls the command loop, doesn't it?
And the command loop should call the event loop, which should execute
the enqueued magic event, which should cause the last available device
getting deleted, which should cause XEmacs to exit gracefully.
Can you see why the magic event doesn't fire or, if it does, why
doesn't XEmacs exit?
> Does it ever exit gracefully?
Deleting the last device should call graceful exit; for example, this
exits:
xemacs -nw -eval "(delete-device (selected-device) t)"
- 8 participants
- 13 comments
bug report
22 years, 7 months
Martial BRET
Martial BRET
The bug occur while being under perl/xemacs debugger while pass through
a line where a fork was done.
describe-installation output :
------------------------------------------------------------------------
uname -a: SunOS amilcar 5.6 Generic_105181-21 sun4u sparc SUNW,Ultra-30
./configure 'sparc-sun-solaris2.6' '--prefix' '/opt/xemacs-21.1.14'
'--with-database=gnudbm,berkdb'
'--site-includes=/doc/libpng-1.0.11/include:/doc/xpm-3.4k-solaris/include:/doc/zlib-1.1.3/include:/doc/db-2.7.7/BerkeleyDB/include:/doc/bzip2-1.0.1/include:/doc/jpeg-6b/include:/doc/tiff-v3.4beta035/include:/doc/compface/include:/doc/gdbm-1.8.0/include'
'--site-libraries=/doc/libpng-1.0.11/lib:/doc/xpm-3.4k-solaris/lib:/doc/zlib-1.1.3/lib:/doc/db-2.7.7/BerkeleyDB/lib:/doc/bzip2-1.0.1/lib:/doc/jpeg-6b/lib:/doc/tiff-v3.4beta035/lib:/doc/compface/lib:/doc/gdbm-1.8.0/lib'
'--site-runtime-libraries=/usr/ccs/lib:/usr/dt/lib:/usr/openwin/lib'
'--with-site-lisp' '--with-cde' '--with-mule' '-with-xfs'
'--with-sparcworks' '--cflags=-O3 -Wall -Wno-switch'
XEmacs 21.1.14 "Cuyahoga Valley" configured for `sparc-sun-solaris2.6'.
Where should the build process find the source code?
/doc/xemacs-21.1.14
What installation prefix should install use? /opt/xemacs-21.1.14
What operating system and machine description files should XEmacs use?
`s/sol2.h' and `m/sparc.h'
What compiler should XEmacs be built with? gcc -O3 -Wall
-Wno-switch
Should XEmacs use the GNU version of malloc? yes
Should XEmacs use the relocating allocator for buffers? yes
What window system should XEmacs use? x11
Where do we find X Windows header files?
/usr/dt/include /usr/openwin/include
Where do we find X Windows libraries? /usr/dt/lib
/usr/openwin/lib
Additional header files:
/doc/libpng-1.0.11/include /doc/xpm-3.4k-solaris/include
/doc/zlib-1.1.3/include /doc/db-2.7.7/BerkeleyDB/include
/doc/bzip2-1.0.1/include /doc/jpeg-6b/include
/doc/tiff-v3.4beta035/include /doc/compface/include
/doc/gdbm-1.8.0/include
Additional libraries:
/doc/libpng-1.0.11/lib /doc/xpm-3.4k-solaris/lib /doc/zlib-1.1.3/lib
/doc/db-2.7.7/BerkeleyDB/lib /doc/bzip2-1.0.1/lib /doc/jpeg-6b/lib
/doc/tiff-v3.4beta035/lib /doc/compface/lib /doc/gdbm-1.8.0/lib
Runtime library search path:
/usr/ccs/lib:/usr/dt/lib:/usr/openwin/lib
Compiling in support for XAUTH.
Compiling in support for XPM images.
Compiling in support for PNG image handling.
Compiling in support for (builtin) GIF image handling.
Compiling in support for JPEG image handling.
Compiling in support for TIFF image handling.
Compiling in support for X-Face message headers.
Compiling in support for Berkeley DB.
Compiling in support for GNU DBM.
Compiling in Mule (multi-lingual) support.
Compiling in XIM (X11R5+ I18N input method) support.
Using Motif to provide XIM support.
Compiling in support for ToolTalk.
Compiling in support for Sun WorkShop.
Compiling in support for proper session-management.
Using Lucid menubars.
Using Lucid scrollbars.
Using Motif dialog boxes.
Compiling in DLL support.
movemail will use "dot-locking" for locking mail spool files.
------------------------------------------------------------------------
gdb /opt/bin/xemacs core :
------------------------------------------------------------------------
breguet.bret.3:gdb /opt/bin/xemacs core
GDB is free software and you are welcome to distribute copies of it
under certain conditions; type "show copying" to see the conditions.
There is absolutely no warranty for GDB; type "show warranty" for
details.
GDB 4.10.pl1 (sparc-sun-solaris2.2),
Copyright 1993 Free Software Foundation, Inc...
warning: core file may not match specified executable file.
Core was generated by `xemacs'.
Program terminated with signal 6, Abort.
#0 0xef1c8244 in _edata ()
(gdb) where
#0 0xef1c8244 in _edata ()
#1 0x9d6e4 in fatal_error_signal ()
(gdb)
------------------------------------------------------------------------
Regards,
Martial Bret.
- 1 participants
- 0 comments
Re: [V21.5] [CORE] Reinstate a couple of things we lost from mule-misc.el
22 years, 7 months
Steve Youngs
Steve Youngs
For the benefit of others, the function in question is...
(defun string-to-char-list (str)
(mapcar 'identity str))
|--==> "SJT" == Stephen J Turnbull <stephen(a)xemacs.org> writes:
SJT> VETO
SJT> This is a perfectly good generic function. Please don't put it in
SJT> ./lisp/mule.
The only reason I put it in ./lisp/mule is because that's where it was
originally (it used to be in 'mule-misc.el'). I can move it somewhere
else without any problems. Can anyone suggest a place for it? It
doesn't need to be hidden away from the prying eyes of inquisitive
users, so I don't want to put it in obsolete.el.
--
|---<Steve Youngs>---------------<GnuPG KeyID: 10D5C9C5>---|
| XEmacs - It's not just an editor. |
| It's a way of life. |
|------------------------------------<youngs(a)xemacs.org>---|
- 1 participants
- 0 comments
[PATCH] fix for printer.el (Printing doesn't work on non-Windows systems)
22 years, 7 months
Mike FABIAN
Mike FABIAN
Old patch which seems to have been lost. Still applies unchanged to
XEmacs 21.4.6:
2002-04-25 Mike Fabian <mfabian(a)suse.de>
* printer.el: make printing from the "Print <buffer-name>"
menu entry in the "File" menu work on Linux like systems
To: xemacs-beta(a)xemacs.org
Subject: Bug fix for printer.el (Printing doesn't work on non-Windows systems)
From: FABIAN Mike <mfabian(a)suse.de>
Date: 18 Oct 2001 23:43:31 +0200
Message-ID: <s3t1yk07hfg.fsf(a)gregory.suse.de>
The function 'generic-print-region' in printer.el contains a small bug
which prevents printing on non-MS-Windows systems. Because of this
printing from the "Print <buffer-name>" menu entry in the "File" menu
doesn't work on non-MS-Windows systems. The following patch fixes it:
--- xemacs-21.4.4/lisp/printer.el.orig Thu Oct 18 21:32:21 2001
+++ xemacs-21.4.4/lisp/printer.el Thu Oct 18 21:33:10 2001
＠＠ -443,5 +443,5 ＠＠
(setq copies (1- copies)))))
((and (not (eq system-type 'windows-nt))
(fboundp 'lpr-region))
- (lpr-region buffer))
+ (lpr-region (point-min) (point-max)))
(t (error "No print support available"))))
--
Mike Fabian <mfabian(a)suse.de> http://www.suse.de/~mfabian
睡眠不足はいい仕事の敵だ。
- 3 participants
- 3 comments
[fail] XEmacs 21.5-b6 "bok choi", i386-unknown-freebsd4.5
22 years, 7 months
Yoshiaki Kasahara
Yoshiaki Kasahara
I guess I should send it to xemacs-beta instead of xemacs-buildreport...
--
The configure option '--with-xfs' has no effect because src/config.h
doesn't have a line about 'USE_XFONTSET'.
The last messages of the compilation:
gcc -c -g -O3 -Wall -Wno-switch -Winline -Wmissing-prototypes -Wsign-compare -Wshadow -Wpointer-arith -Demacs -I. -DHAVE_CONFIG_H -I/usr/local/include -I/usr/local/include -I/usr/X11R6/include input-method-xlib.c
input-method-xlib.c:85: #error neither XIM_XLIB nor USE_XFONTSET is defined??
gmake[1]: *** [input-method-xlib.o] Error 1
gmake[1]: Leaving directory `/usr/local/src/xemacs21/xemacs/src'
gmake: *** [dump-elcs] Error 2
----
> XEmacs Build Report generated by emacs-version
> 21.5 (beta5) "beets" XEmacs Lucid
> with system-configuration
> i386-unknown-freebsd4.5
> follows:
> Contents of /usr/local/src/xemacs21/xemacs/Installation:
> (Output from most recent run of ./configure)
uname -a: FreeBSD elvenbow.nc.kyushu-u.ac.jp 4.5-STABLE FreeBSD 4.5-STABLE #0: Fri Feb 22 18:08:39 JST 2002 root＠elvenbow.nc.kyushu-u.ac.jp:/usr/obj/usr/src/sys/ELVENBOW i386
./configure '--with-mule' '--with-xim=no' '--error-checking=all' '--debug' '--with-xfs' '--with-widgets=athena' '--with-dialogs=athena' '--without-canna' '--site-prefixes=/usr/local'
XEmacs 21.5-b6 "bok choi" configured for `i386-unknown-freebsd4.5'.
Compilation / Installation:
Source code location: /usr/local/src/xemacs21/xemacs
Installation prefix: /usr/local
Additional prefixes: /usr/local
Runtime library search path: /usr/local/lib:/usr/X11R6/lib:/usr/libexec
Operating system description file: `s/freebsd.h'
Machine description file: `m/intel386.h'
Compiler: gcc -g -O3 -Wall -Wno-switch -Winline -Wmissing-prototypes -Wsign-compare -Wshadow -Wpointer-arith
Relocating allocator for buffers: yes
GNU version of malloc: yes
Window System:
Compiling in support for the X window system:
- X Windows headers location: /usr/X11R6/include
- X Windows libraries location: /usr/X11R6/lib
- Handling WM_COMMAND properly.
Compiling in support for the Athena widget set:
- Athena headers location: X11/Xaw
- Athena library to link: Xaw
Using Lucid menubars.
Using Lucid scrollbars.
Using Athena dialog boxes.
Using Athena native widgets.
TTY:
Compiling in support for ncurses.
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Compiling in support for X-Face message headers.
Sound:
Compiling in support for sound (native).
Compiling in support for ESD (Enlightened Sound Daemon).
Databases:
Compiling in support for Berkeley database.
Compiling in support for GNU DBM.
Compiling in support for LDAP.
Internationalization:
Compiling in support for Mule (multi-lingual Emacs).
- Using XFontSet to provide bilingual menubar.
Mail:
Compiling in support for "flock" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for dynamic shared object modules.
Compiling in support for extra debugging code.
WARNING: ---------------------------------------------------------
WARNING: Compiling in support for runtime error checking.
WARNING: XEmacs will run noticeably more slowly as a result.
WARNING: Error checking is on by default for XEmacs beta releases.
WARNING: ---------------------------------------------------------
/usr/local/src/xemacs21/xemacs/xemacs-make-install.err not found!
/usr/local/src/xemacs21/xemacs/xemacs-make-check.err not found!
/usr/local/src/xemacs21/xemacs/xemacs-make-check-temacs.err not found!
/usr/local/src/xemacs21/xemacs/xemacs-make-all.err not found!
/usr/local/src/xemacs21/xemacs/beta.err not found!
--
Yoshiaki Kasahara
Computing and Communications Center, Kyushu University
kasahara(a)nc.kyushu-u.ac.jp
- 1 participants
- 1 comments
21.5-b6 xemacs -nw weirdness with TERM=kterm
22 years, 7 months
Yoshiaki Kasahara
Yoshiaki Kasahara
I noticed that when I use xemacs-21.5-b6 -nw on kterm with TERM=kterm,
some of keystrokes (including C-n) won't correctly passed to xemacs.
I tried to set debug-emacs-events and found xemacs didn't receive C-n
at all.
After that, I found that with xterm, TERM=kterm had the same ill
effects. So I feel something wrong with termcap entry, but until
xemacs-21.5-b5 there was no such problem at all.
I'm using FreeBSD-4.5 and bundled /etc/termcap. The entry of kterm is
as follows:
kterm|kterm kanji terminal emulator (X window system):\
:hs:es:ts=\E[?E\E[?%i%dT:fs=\E[?F:ds=\E[?H:\
:KJ:sc=\E7:rc=\E8:cs=\E[%i%d;%dr:TY=ascii:tc=xterm:
I'm not sure which is wrong, /etc/termcap or xemacs itself ?
Here is the 'Installation' file of my xemacs-21.5-b6:
uname -a: FreeBSD elvenbow.nc.kyushu-u.ac.jp 4.5-STABLE FreeBSD 4.5-STABLE #0: Fri Feb 22 18:08:39 JST 2002 root＠elvenbow.nc.kyushu-u.ac.jp:/usr/obj/usr/src/sys/ELVENBOW i386
./configure '--with-mule' '--error-checking=all' '--debug' '--with-xfs' '--with-widgets=athena' '--with-dialogs=athena' '--without-canna' '--site-prefixes=/usr/local'
XEmacs 21.5-b6 "bok choi" configured for `i386-unknown-freebsd4.5'.
Compilation / Installation:
Source code location: /usr/local/src/xemacs21/xemacs
Installation prefix: /usr/local
Additional prefixes: /usr/local
Runtime library search path: /usr/local/lib:/usr/X11R6/lib:/usr/libexec
Operating system description file: `s/freebsd.h'
Machine description file: `m/intel386.h'
Compiler: gcc -g -O3 -Wall -Wno-switch -Winline -Wmissing-prototypes -Wsign-compare -Wshadow -Wpointer-arith
Relocating allocator for buffers: yes
GNU version of malloc: yes
Window System:
Compiling in support for the X window system:
- X Windows headers location: /usr/X11R6/include
- X Windows libraries location: /usr/X11R6/lib
- Handling WM_COMMAND properly.
Compiling in support for the Athena widget set:
- Athena headers location: X11/Xaw
- Athena library to link: Xaw
Using Lucid menubars.
Using Lucid scrollbars.
Using Athena dialog boxes.
Using Athena native widgets.
TTY:
Compiling in support for ncurses.
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
Compiling in support for PNG images.
Compiling in support for JPEG images.
Compiling in support for TIFF images.
Compiling in support for X-Face message headers.
Sound:
Compiling in support for sound (native).
Compiling in support for ESD (Enlightened Sound Daemon).
Databases:
Compiling in support for Berkeley database.
Compiling in support for GNU DBM.
Compiling in support for LDAP.
Internationalization:
Compiling in support for Mule (multi-lingual Emacs).
Compiling in support for XIM (X11R5+ I18N input method).
- Using Motif to provide XIM support.
Mail:
Compiling in support for "flock" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for dynamic shared object modules.
Compiling in support for extra debugging code.
WARNING: ---------------------------------------------------------
WARNING: Compiling in support for runtime error checking.
WARNING: XEmacs will run noticeably more slowly as a result.
WARNING: Error checking is on by default for XEmacs beta releases.
WARNING: ---------------------------------------------------------
--
Yoshiaki Kasahara
Computing and Communications Center, Kyushu University
kasahara(a)nc.kyushu-u.ac.jp
- 1 participants
- 0 comments
bug report
22 years, 7 months
Lavi, Israel
Lavi, Israel
To: xemacs-beta(a)xemacs.org
Subject: xemacs is opened with /net
Reply-to: israel_lavi(a)bmc.com
--text follows this line--
This bug report will be sent to the XEmacs Development Team,
not to your local site managers!!
Please write in English, because the XEmacs maintainers do not have
translators to read other languages for them.
Please describe as succinctly as possible:
- What happened.
- What you thought should have happened.
- Precisely what you were doing at the time.
Please also include any C or lisp back-traces that you may have.
================================================================
Dear Bug Team!
I open the emacs from our configuarion management tool and it always
adding /net at start.
Please advise
Israel John
================================================================
System Info to help track down your bug:
---------------------------------------
uname -a: HP-UX zydeco B.11.00 U 9000/785 2005951250 unlimited-user license
./configure '--cflags=-g' '--with-site-lisp=yes' '--debug'
'--error-checking=all' '--verbose'
XEmacs 21.5-b4 "bamboo" configured for `hppa2.0w-hp-hpux11.00'.
Compilation / Installation:
Source code location: /home/XE/xemacs-21.5.4
Installation prefix: /usr/local
Operating system description file: `s/hpux11.h'
Machine description file: `m/hp800.h'
Compiler: cc -g
Relocating allocator for buffers: yes
GNU version of malloc: yes
Window System:
Compiling in support for the X window system:
- X Windows headers location: /usr/dt/include
/usr/contrib/X11R6/include
- X Windows libraries location: /usr/dt/lib /usr/lib/X11R6
/usr/contrib/X11R6/lib
- Xau (X authority) not available.
- Handling WM_COMMAND properly.
Using Lucid menubars.
Using Lucid scrollbars.
Using Motif dialog boxes.
Using Motif native widgets.
TTY:
Images:
Compiling in support for GIF images (builtin).
Compiling in support for XPM images.
WARNING: -----------------------------------------------------------
WARNING: Compiling without PNG image support.
WARNING: You should strongly consider installing the PNG libraries.
WARNING: Otherwise certain images and glyphs may not display.
WARNING: (a copy may be found in ftp://ftp.xemacs.org/pub/xemacs/aux)
WARNING: -----------------------------------------------------------
Sound:
Databases:
Compiling in support for DBM.
Internationalization:
Mail:
Compiling in support for "dot-locking" mail spool file locking method.
Other Features:
Inhibiting IPv6 canonicalization at startup.
Compiling in support for ToolTalk.
Compiling in support for dynamic shared object modules.
Compiling in support for extra debugging code.
WARNING: ---------------------------------------------------------
WARNING: Compiling in support for runtime error checking.
WARNING: XEmacs will run noticeably more slowly as a result.
WARNING: Error checking is on by default for XEmacs beta releases.
WARNING: ---------------------------------------------------------
Load-Path Lisp Shadows:
----------------------
(/h/israel_l/emacs-progs/vm-vcard
/home/XE/xemacs-21.5.4/site-lisp/vm-vcard
/h/israel_l/emacs-progs/vcard /home/XE/xemacs-21.5.4/site-lisp/vcard
/h/israel_l/emacs-progs/align /home/XE/xemacs-21.5.4/site-lisp/align
/home/XE/xemacs-21.5.4/site-lisp/setnu
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/edit-utils/setnu
/h/israel_l/emacs-progs/igrep
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/igrep/igrep
/h/israel_l/emacs-progs/Mailcrypt/mc-toplev
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/mailcrypt/mc-toplev
/h/israel_l/emacs-progs/Mailcrypt/mc-setversion
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/mailcrypt/mc-setversion
/h/israel_l/emacs-progs/Mailcrypt/mc-remail
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/mailcrypt/mc-remail
/h/israel_l/emacs-progs/Mailcrypt/mc-pgp5
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/mailcrypt/mc-pgp5
/h/israel_l/emacs-progs/Mailcrypt/mc-pgp
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/mailcrypt/mc-pgp
/h/israel_l/emacs-progs/Mailcrypt/mailcrypt
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/mailcrypt/mailcrypt
/h/israel_l/emacs-progs/Mailcrypt/expect
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/mailcrypt/expect
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/ps-print/ps-print
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/ps-print-nomule/ps-print
/h/israel_l/emacs-progs/VM/vm
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm
/h/israel_l/emacs-progs/VM/vm-window
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-window
/h/israel_l/emacs-progs/VM/vm-virtual
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-virtual
/h/israel_l/emacs-progs/VM/vm-version
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-version
/h/israel_l/emacs-progs/VM/vm-vars
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-vars
/h/israel_l/emacs-progs/VM/vm-user
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-user
/h/israel_l/emacs-progs/VM/vm-undo
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-undo
/h/israel_l/emacs-progs/VM/vm-toolbar
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-toolbar
/h/israel_l/emacs-progs/VM/vm-thread
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-thread
/h/israel_l/emacs-progs/VM/vm-summary
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-summary
/h/israel_l/emacs-progs/VM/vm-startup
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-startup
/h/israel_l/emacs-progs/VM/vm-sort
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-sort
/h/israel_l/emacs-progs/VM/vm-search
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-search
/h/israel_l/emacs-progs/VM/vm-save
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-save
/h/israel_l/emacs-progs/VM/vm-reply
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-reply
/h/israel_l/emacs-progs/VM/vm-pop
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-pop
/h/israel_l/emacs-progs/VM/vm-page
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-page
/h/israel_l/emacs-progs/VM/vm-mouse
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-mouse
/h/israel_l/emacs-progs/VM/vm-motion
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-motion
/h/israel_l/emacs-progs/VM/vm-misc
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-misc
/h/israel_l/emacs-progs/VM/vm-minibuf
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-minibuf
/h/israel_l/emacs-progs/VM/vm-mime
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-mime
/h/israel_l/emacs-progs/VM/vm-message
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-message
/h/israel_l/emacs-progs/VM/vm-menu
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-menu
/h/israel_l/emacs-progs/VM/vm-mark
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-mark
/h/israel_l/emacs-progs/VM/vm-macro
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-macro
/h/israel_l/emacs-progs/VM/vm-license
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-license
/h/israel_l/emacs-progs/VM/vm-imap
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-imap
/h/israel_l/emacs-progs/VM/vm-folder
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-folder
/h/israel_l/emacs-progs/VM/vm-edit
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-edit
/h/israel_l/emacs-progs/VM/vm-easymenu
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-easymenu
/h/israel_l/emacs-progs/VM/vm-digest
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-digest
/h/israel_l/emacs-progs/VM/vm-delete
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-delete
/h/israel_l/emacs-progs/VM/vm-autoload
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/vm-autoload
/h/israel_l/emacs-progs/VM/tapestry
/home/XE/xemacs-21.5.4/xemacs-packages/lisp/vm/tapestry)
Installed XEmacs Packages:
-------------------------
((xemacs-devel:version 1.4 :type single-file)
(xemacs-base :version 1.58 :type regular)
(vm :version 7.02 :type regular)
(view-process :version 1.11 :type regular)
(time :version 1.11 :type regular)
(textools :version 1.12 :type regular)
(text-modes :version 1.37 :type single-file)
(supercite :version 1.19 :type regular)
(sounds-wav :version 1.1 :type regular)
(sounds-au :version 1.1 :type regular)
(sh-script :version 1.13 :type regular)
(psgml :version 1.26 :type regular)
(ps-print-nomule :version 1.05 :type regular)
(ps-print :version 1.02 :type regular)
(prog-modes
:version
1
.49
:type
single-file)
(os-utils :version 1.26 :type single-file)
(net-utils :version 1.23 :type single-file)
(mailcrypt :version 2.11 :type regular)
(mail-lib :version 1.43 :type regular)
(ispell :version 1.23 :type regular)
(ilisp :version 1.2 :type regular)
(igrep :version 1.08 :type regular)
(hm--html-menus :version 1.16 :type regular)
(footnote :version 1.13 :type regular)
(efs :version 1.27 :type regular)
(edit-utils :version 1.76 :type single-file)
(ediff :version 1.36 :type regular)
(dired :version 1.11 :type regular)
(dictionary :version 1.06 :type regular)
(debug :version 1.14 :type regular)
(cookie :version 1.13 :type regular)
(cc-mode :version 1.27 :type regular)
(c-support :version 1.16 :type single-file))
Features:
--------
(mail-abbrevs xemacsbug shadow sendmail rfc822 makefile regexp-opt
view-less view hyper-apropos shell dired-faces dired-xemacs dired
compile cc-mode cc-align cc-cmds cc-engine cc-styles cc-langs
cc-vars wid-edit cc-menus imenu cc-defs efs-cu scroll-in-place
ps-print lpr func-menu mode-motion+ thing align disp-table
rm-tspaces browse-url time setnu font-lock cus-face build-report
config footnote mailcrypt comint ring gnuserv AJK::amir-menu-funcs
completer crypt crypt++ filladapt NDS::nds-menu-funcs
xemacs-devel-autoloads xemacs-base-autoloads vm-autoloads
view-process-autoloads time-autoloads textools-autoloads
text-modes-autoloads supercite-autoloads sounds-wav-autoloads
sounds-au-autoloads sh-script-autoloads psgml-autoloads
ps-print-nomule-autoloads ps-print-autoloads prog-modes-autoloads
os-utils-autoloads net-utils-autoloads mailcrypt-autoloads
mail-lib-autoloads ispell-autoloads ilisp-autoloads igrep-autoloads
hm--html-menus-autoloads footnote-autoloads efs-autoloads
edit-utils-autoloads ediff-autoloads dired-autoloads
dictionary-autoloads debug-autoloads cookie-autoloads
cc-mode-autoloads c-support-autoloads src-autoloads loadhist
auto-show fontl-hooks x-iso8859-1 gutter-items menubar-items
x-menubar mode-motion mouse itimer auto-save lisp-mode easymenu
iso8859-1 page buff-menu lib-complete help-nomule cus-file derived
frame text-props obsolete cus-start custom widget cl-extra mini-cl
cl cl-19 packages backquote very-early-lisp tooltalk
lucid-scrollbars cut-buffer lucid-menubars motif-dialogs x
c-balloon-help tty-frames tty toolbar scrollbar unix-processes
multicast network-streams subprocesses modules
menu-accelerator-support menubar dbm md5 xemacs gutter gif xpm xbm
lisp-float-type hpux dialog devices window-system base64)
Recent keystrokes:
-----------------
C-r C-r C-next C-next C-next C-prior C-prior next next
next next down next up up right up up up left left
left left left left left up f2 C-g f2 c c , BS m -
w a TAB TAB / TAB TAB BS BS TAB TAB TAB BS BS TAB TAB
w TAB TAB TAB S A TAB - TAB TAB TAB TAB c s TAB TAB
TAB s t BS TAB TAB TAB a c TAB i TAB RET f2 f1 C-g
f1 RET ESC x r e p TAB o TAB r TAB x e TAB RET
Recent messages (most recent first):
-----------------------------------
Loading xemacsbug...done
Loading xemacsbug...
Making completion list...
Making completion list...
Quit
Command attempted to use minibuffer while in minibuffer
Note: file is write protected
Making completion list...
Making completion list...
Making completion list...
Making completion list...
Command attempted to use minibuffer while in minibuffer
History is not being recorded in this context
Quit
Invalid operation: Attempt to split minibuffer window
Command attempted to use minibuffer while in minibuffer
Loading make-mode...done
Loading make-mode...
Making completion list...
Cannot switch buffers in minibuffer window
Israel John Lavi
BMCSoftware
INCONTROL Business Unit
Fax: +972-3-766-4617
* +972-3-645-1740
* Israel_Lavi(a)bmc.com
"The roots of education are bitter, but the fruit is sweet." (Aristotle)
<http://www.bmc.com/>
- 1 participants
- 0 comments
patch to make XEmacs 21.4.6 build with autoconf 2.53
22 years, 7 months
Mike FABIAN
Mike FABIAN
The patch below makes XEmacs 21.4.6 build with autoconf 2.53.
I believe Andreas Schwab <schwab(a)suse.de> and/or
Werner Fink <werner(a)suse.de> made this patch.
--- xemacs-21.4.4/configure.in
+++ xemacs-21.4.4/configure.in 2002/04/04 13:15:06
＠＠ -1,5 +1,5 ＠＠
dnl Define our own header notice with own copyright
-define([AC_INIT_NOTICE],
+define([XE_AC_INIT_NOTICE],
[#### Configuration script for XEmacs. Largely divergent from FSF.
#### Guess values for system-dependent variables and create Makefiles.
#### Generated automatically using autoconf version] AC_ACVERSION [
＠＠ -43,6 +43,13 ＠＠
### If configure fails after disturbing the status quo,
### config.status is removed.
])
+AC_DIVERT_PUSH(NOTICE)
+XE_AC_INIT_NOTICE
+define([_AC_INIT_PARSE_ARGS],
+[m4_divert_push([PARSE_ARGS])dnl
+m4_divert_pop([PARSE_ARGS])dnl
+])
+AC_DIVERT_POP
dnl Since XEmacs has configuration requirements that autoconf cannot
dnl meet, this file is an unholy marriage of custom-baked
＠＠ -51,7 +58,7 ＠＠
dnl We use the m4 quoting characters [ ] (as established by the
dnl autoconf system), so quote them like this: [[foo]]
-AC_PREREQ(2.13)dnl
+AC_PREREQ(2.50)dnl
dnl Redefine some standard autoconf macros
dnl here is how XEmacs is different:
dnl - no cache file
＠＠ -81,14 +88,14 ＠＠
#include "confdefs.h"
[$1]
EOF
-if AC_TRY_EVAL(ac_link) && test -s conftest && (./conftest; exit $?) 2>&AC_FD_CC
+if AC_TRY_EVAL(ac_link) && test -s conftest && (./conftest; exit $?) 2>&AS_MESSAGE_LOG_FD
then
dnl Do not remove the temporary files here, so they can be examined.
ifelse([$2], , :, [$2])
else
conftest_rc="$?"
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.$ac_ext >&AC_FD_CC
+ echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&AS_MESSAGE_LOG_FD
ifelse([$3], , , [ rm -fr conftest*
$3
])dnl
＠＠ -104,21 +111,25 ＠＠
dnl Set VARIABLE to VALUE, verbatim, or 1.
dnl AC_DEFINE(VARIABLE [, VALUE])
define([AC_DEFINE],
-[{ test "$extra_verbose" = "yes" && cat << \EOF
+[
+{ test "$extra_verbose" = "yes" && cat << \EOF
Defining $1[]ifelse($#, 2, [ = $2],)
EOF
-cat >> confdefs.h <<\EOF
-[#define] $1 ifelse($#, 2, [$2], 1)
+m4_ifval([$3], [_AH_TEMPLATE_OLD([$1], [$3])])dnl
+cat >>confdefs.h <<\EOF
+[＠%:＠define] $1 m4_if($#, 2, [$2], $#, 3, [$2], 1)
EOF
}
])dnl AC_DEFINE
define([AC_DEFINE_UNQUOTED],
-[{ test "$extra_verbose" = "yes" && cat << EOF
+[
+{ test "$extra_verbose" = "yes" && cat << EOF
Defining $1[]ifelse($#, 2, [ = $2],)
EOF
-cat >> confdefs.h <<EOF
-[#define] $1 ifelse($#, 2, [$2], 1)
+m4_ifval([$3], [_AH_TEMPLATE_OLD([$1], [$3])])dnl
+cat >>confdefs.h <<EOF
+[＠%:＠define] $1 m4_if($#, 2, [$2], $#, 3, [$2], 1)
EOF
}
])dnl AC_DEFINE_UNQUOTED
＠＠ -157,7 +168,7 ＠＠
AC_TRY_LINK(dnl
ifelse([$2], [main], , dnl Avoid conflicting decl of main.
[/* Override any gcc2 internal prototype to avoid an error. */
-]ifelse(AC_LANG, CPLUSPLUS, [#ifdef __cplusplus
+]ifelse(_AC_LANG, CPLUSPLUS, [#ifdef __cplusplus
extern "C"
#endif
])dnl
＠＠ -190,20 +201,21 ＠＠
dnl AC_LANG_C()
define([AC_LANG_C],
-[define([AC_LANG], [C])dnl
+[define([_AC_LANG], [C])dnl
ac_ext=c
dnl CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
dnl ac_cpp='$CPP $CPPFLAGS'
-dnl ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&AC_FD_CC'
-dnl ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
+dnl ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&AS_MESSAGE_LOG_FD'
+dnl ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AS_MESSAGE_LOG_FD'
xe_cppflags='$CPPFLAGS $c_switch_site $c_switch_machine $c_switch_system $c_switch_x_site $X_CFLAGS'
xe_ldflags='$LDFLAGS $ld_switch_site $ld_switch_machine $ld_switch_system $ld_switch_x_site $ld_switch_run'
xe_libs='$ld_call_shared $xe_check_libs $X_EXTRA_LIBS $libs_x $libs_gtk $X_PRE_LIBS $LIBS $libs_machine $libs_system $libs_standard'
ac_cpp='$CPP '"$xe_cppflags"
-ac_compile='${CC-cc} -c $CFLAGS '"$xe_cppflags"' conftest.$ac_ext 1>&AC_FD_CC'
-ac_link='${CC-cc} -o conftest $CFLAGS '"$xe_cppflags $xe_ldflags"' conftest.$ac_ext '"$xe_libs"' 1>&AC_FD_CC'
+ac_compile='${CC-cc} -c $CFLAGS '"$xe_cppflags"' conftest.$ac_ext 1>&AS_MESSAGE_LOG_FD'
+ac_link='${CC-cc} -o conftest $CFLAGS '"$xe_cppflags $xe_ldflags"' conftest.$ac_ext '"$xe_libs"' 1>&AS_MESSAGE_LOG_FD'
cross_compiling=no
]) dnl AC_LANG_C
+define([AC_LANG(C)], [AC_LANG_C]);
dnl The construct foo=`echo $w1 $w2 $w3` fails on some systems if $w1 = -e or -n
dnl So we use the following instead.
＠＠ -243,7 +255,7 ＠＠
dnl The variables have the same names as the options, with
dnl dashes changed to underlines.
-define([AC_INIT_PARSE_ARGS],[
+AC_DIVERT_PUSH(PARSE_ARGS)
dnl Get sane consistent behavior from various shells
dnl Avoid losing with weird user CDPATHs
＠＠ -266,8 +278,11 ＠＠
fi
dnl Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
dnl The variables have the same names as the options, with
dnl dashes changed to underlines.
+cache_file=/dev/null
exec_prefix=NONE
host=NONE
no_create=
＠＠ -291,9 +306,9 ＠＠
SHELL=${CONFIG_SHELL-/bin/sh}
dnl Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
-])dnl AC_INIT_PARSE_ARGS
+AC_DIVERT_POP
-AC_INIT(src/lisp.h)dnl
+AC_INIT(lisp/version.el)
AC_CONFIG_HEADER(src/config.h lwlib/config.h)
dnl Remove any more than one leading "." element from the path name.
dnl If we do not remove them, then another "./" will be prepended to
＠＠ -1040,7 +1055,7 ＠＠
dnl names of the m/*.h and s/*.h files we should use.
dnl Canonicalize the configuration name.
-AC_MSG_CHECKING("host system type")
+AS_MESSAGE([checking "host system type"...])
dnl allow -workshop suffix on configuration name
internal_configuration=`echo $configuration | sed 's/-\(workshop\)//'`
canonical=`${CONFIG_SHELL-/bin/sh} $srcdir/config.sub "$internal_configuration"`
＠＠ -2455,7 +2470,7 ＠＠
AC_DEFINE(HAVE_INVERSE_HYPERBOLIC))
dnl Determine type of mail locking from configure args and s&m headers
-AC_CHECKING(type of mail spool file locking)
+AS_MESSAGE([checking type of mail spool file locking...])
AC_CHECK_FUNCS(lockf flock)
dnl The mail_use_xxx variables are set according to the s&m headers.
test -z "$mail_locking" -a "$mail_use_flock" = "yes" && mail_locking=flock
＠＠ -2513,7 +2528,7 ＠＠
dnl Choose a window system
dnl ----------------------
-AC_CHECKING("for specified window system")
+AS_MESSAGE([checking "for specified window system"...])
dnl Autodetection of Gdk libraries and includes
dnl -------------------------------------------
＠＠ -2751,7 +2766,7 ＠＠
test ! -z "$bitmapdirs" && AC_DEFINE_UNQUOTED(BITMAPDIR, "$bitmapdirs")
dnl Autodetect defines extracted from X config by xmkmf, e.g. NARROWPROTO
- AC_CHECKING(for X defines extracted by xmkmf)
+ AS_MESSAGE([checking for X defines extracted by xmkmf...])
rm -fr conftestdir
if mkdir conftestdir; then
cd conftestdir
＠＠ -2871,7 +2886,7 ＠＠
fi dnl $with_x11 = yes
if test "$with_msw" != "no"; then
- AC_CHECKING(for MS-Windows)
+ AS_MESSAGE([checking for MS-Windows...])
AC_CHECK_LIB(gdi32,main,with_msw=yes)
if test "$with_msw" = "yes"; then
AC_DEFINE(HAVE_MS_WINDOWS)
＠＠ -2987,7 +3002,7 ＠＠
esac
dnl Enable or disable proper handling of WM_COMMAND
-AC_CHECKING(for WM_COMMAND option);
+AS_MESSAGE([checking for WM_COMMAND option...]);
dnl if test "$with_wmcommand" = "yes"; then
if test "$with_wmcommand" != "no"; then
AC_DEFINE(HAVE_WMCOMMAND)
＠＠ -3103,7 +3118,7 ＠＠
fi
dnl Autodetect LDAP
-AC_CHECKING(for LDAP)
+AS_MESSAGE([checking for LDAP...])
test -z "$with_ldap" && { AC_CHECK_HEADER(ldap.h, ,with_ldap=no) }
test -z "$with_ldap" && { AC_CHECK_HEADER(lber.h, ,with_ldap=no) }
if test "$with_ldap" != "no"; then
＠＠ -3140,7 +3155,7 ＠＠
dnl (such as the default /usr/local/pgsql when building from source),
dnl that prefix must be specified using the --site-prefixes flag.
if test "$with_postgresql" != "no"; then
- AC_CHECKING(for PostgreSQL)
+ AS_MESSAGE([checking for PostgreSQL...])
dnl Look for these standard header file locations, known to be used on Linux
for header_dir in "" "pgsql/" "postgresql/"; do
＠＠ -3169,7 +3184,7 ＠＠
dnl ----------------------
if test "$window_system" != "none"; then
- AC_CHECKING(for graphics libraries)
+ AS_MESSAGE([checking for graphics libraries...])
dnl Autodetect Xpm
xpm_problem=""
＠＠ -3326,11 +3341,11 ＠＠
dnl ----------------------
if test "$with_x11" = "yes"; then
- AC_CHECKING(for X11 graphics libraries)
+ AS_MESSAGE([checking for X11 graphics libraries...])
fi
if test "$with_x11" = "yes" -a "$with_widgets" = "athena"; then
- AC_CHECKING(for the Athena widgets)
+ AS_MESSAGE([checking for the Athena widgets...])
dnl What in heck did the user actually want?
case "$with_athena" in
＠＠ -3369,42 +3384,42 ＠＠
dnl Now we locate the Athena headers that we need.
if test "$athena_3d" = "no"; then
AC_CHECK_HEADER(X11/Xaw/ThreeD.h,
- AC_MSG_WARN("Could not find a non-3d Athena header set."),
- AC_CHECK_HEADER(X11/Xaw/XawInit.h,
+ [AC_MSG_WARN("Could not find a non-3d Athena header set.")],
+ [AC_CHECK_HEADER(X11/Xaw/XawInit.h,
athena_h_path=X11/Xaw,
- AC_MSG_WARN("Could not find a non-3d Athena header set.")))
+ [AC_MSG_WARN("Could not find a non-3d Athena header set.")])])
else
dnl The three-d Athena headers are so much more slippery.
dnl Curse this `Lets replace standard libraries' thing that they did. :/
AC_CHECK_HEADER(X11/$athena_variant/XawInit.h,
- AC_CHECK_HEADER(X11/$athena_variant/ThreeD.h,
- athena_h_path=X11/$athena_variant,))
+ [AC_CHECK_HEADER(X11/$athena_variant/ThreeD.h,
+ athena_h_path=X11/$athena_variant,)])
dnl Is the variant specific header directory directly under include?
if test -z "$athena_h_path"; then
AC_CHECK_HEADER($athena_variant/XawInit.h,
- AC_CHECK_HEADER($athena_variant/ThreeD.h,
- athena_h_path=$athena_variant,))
+ [AC_CHECK_HEADER($athena_variant/ThreeD.h,
+ athena_h_path=$athena_variant,)])
fi
dnl If we couldn't find the specific variant, try the generic Athena 3d headers
if test -z "$athena_h_path" -a "$athena_variant" != "Xaw3d"; then
AC_CHECK_HEADER(X11/Xaw3d/XawInit.h,
- AC_CHECK_HEADER(X11/Xaw3d/ThreeD.h,
+ [AC_CHECK_HEADER(X11/Xaw3d/ThreeD.h,
[
AC_MSG_WARN("Assuming that X11/Xaw3d headers are suitable for $athena_variant.")
athena_h_path=X11/Xaw3d
- ],))
+ ],)])
fi
dnl Also generic 3d headers directly under include dir
if test -z "$athena_h_path" -a "$athena_variant" != "Xaw3d"; then
AC_CHECK_HEADER(Xaw3d/XawInit.h,
- AC_CHECK_HEADER(Xaw3d/ThreeD.h,
+ [AC_CHECK_HEADER(Xaw3d/ThreeD.h,
[
AC_MSG_WARN("Assuming that Xaw3d headers are suitable for $athena_variant.")
athena_h_path=Xaw3d
- ],))
+ ],)])
fi
dnl If nothing yet found, see if Xaw is a 3d header set...
＠＠ -3601,7 +3616,7 ＠＠
fi
if test "$with_mule" = "yes" ; then
- AC_CHECKING(for Mule-related features)
+ AS_MESSAGE([checking for Mule-related features...])
AC_DEFINE(MULE)
AC_DEFINE(FILE_CODING)
XE_ADD_OBJS(mule.o mule-ccl.o mule-charset.o file-coding.o)
＠＠ -3610,12 +3625,12 ＠＠
AC_CHECK_HEADERS(libintl.h)
AC_CHECK_LIB(intl, strerror)
- AC_CHECKING(for Mule input methods)
+ AS_MESSAGE([checking for Mule input methods...])
dnl Do we have the XmIm* routines? And if so, do we want to use them?
dnl XIM seems to be flaky except on Solaris...
dnl test -z "$with_xim" -a "$opsys" != "sol2" && with_xim=no
case "$with_xim" in "" | "yes" )
- AC_CHECKING(for XIM)
+ AS_MESSAGE([checking for XIM...])
AC_CHECK_LIB(X11, XOpenIM, with_xim=xlib, with_xim=no)
dnl XIM + Lesstif is not (yet?) usable
if test "$have_motif $have_lesstif" = "yes no"; then
＠＠ -3640,7 +3655,7 ＠＠
dnl "with_xfs" = "yes"
if test "$with_xfs" = "yes" ; then
- AC_CHECKING(for XFontSet)
+ AS_MESSAGE([checking for XFontSet...])
AC_CHECK_LIB(X11, XmbDrawString, [:], with_xfs=no)
if test "$with_xfs" = "yes" && test "$with_menubars" = "lucid"; then
AC_DEFINE(USE_XFONTSET)
＠＠ -4002,7 +4017,7 ＠＠
dnl Check for sound of various sorts.
dnl Autodetect native sound
-AC_CHECKING("for sound support")
+AS_MESSAGE([checking "for sound support"...])
test -z "$with_native_sound" -a -n "$native_sound_lib" && with_native_sound=yes
if test "$with_native_sound" != "no"; then
＠＠ -4135,7 +4150,7 ＠＠
test -z "$with_tty" && with_tty=yes
if test "$with_tty" = "yes" ; then
- AC_CHECKING(for TTY-related features)
+ AS_MESSAGE([checking for TTY-related features...])
AC_DEFINE(HAVE_TTY)
XE_ADD_OBJS(console-tty.o device-tty.o event-tty.o frame-tty.o objects-tty.o redisplay-tty.o cm.o)
＠＠ -4218,7 +4233,7 ＠＠
dnl By default, we check for DBM support in libgdbm, then libc, then libdbm.
test "$with_database_gdbm $with_database_dbm $with_database_berkdb" \
- != "no no no" && AC_CHECKING(for database support)
+ != "no no no" && AS_MESSAGE([checking for database support...])
dnl Check for ndbm.h, required for either kind of DBM support.
if test "$with_database_gdbm $with_database_dbm" != "no no"; then
＠＠ -4327,7 +4342,7 ＠＠
dnl autodetect dll support
if test "$with_modules" != "no"; then
- AC_CHECKING(for module support)
+ AS_MESSAGE([checking for module support...])
dnl Check for MS-Windows
if test "$with_msw" = "yes"; then
＠＠ -5016,10 +5031,8 ＠＠
dnl Create a GNUmakefile and Makefile from Makefile.in.
changequote(<<,>>)dnl
-dnl CPP_MAKEFILE(CPPFLAGS,filename)
-define(<<CPP_MAKEFILE>>,
-echo creating $dir/<<$2>>
-$CPP -I. -I${top_srcdir}/src <<$1>> junk.c \
+echo creating $dir/Makefile
+$CPP -I. -I${top_srcdir}/src -DUSE_GNU_MAKE junk.c \
dnl Delete line directives inserted by $CPP
| sed -e 's/^\#.*//' \
dnl Delete spurious blanks inserted by $CPP
＠＠ -5034,11 +5047,8 ＠＠
s/\"[ TAB]*$//
}' > Makefile.new
chmod 444 Makefile.new
- mv -f Makefile.new <<$2>>
-)dnl CPP_MAKEFILE
-
- CPP_MAKEFILE(,Makefile)
- CPP_MAKEFILE(-DUSE_GNU_MAKE,GNUmakefile)
+ mv -f Makefile.new Makefile; cp Makefile GNUmakefile
+dnl
changequote([,])dnl
rm -f junk.c
)
--
Mike Fabian <mfabian(a)suse.de> http://www.suse.de/~mfabian
睡眠不足はいい仕事の敵だ。
- 1 participants
- 0 comments
Returned mail: User unknown
22 years, 7 months
Mail Delivery Subsystem
Mail Delivery Subsystem
The original message was received at Thu, 25 Apr 2002 06:41:21 0800
----- The following addresses had permanent fatal errors -----
<michael(a)327.ca>
----- Transcript of session follows -----
... while talking to islandhosting.com:
>>> RCPT To:<michael＠327.ca>
<<< 550 ... User unknown
550 ... User unknown
- 1 participants
- 0 comments