January 2001 - XEmacs-Beta - XEmacs Mailing List Archives

Re: Solaris and gcc 2.95.2? 23 years, 10 months

Gunnar Evermann

Raymond Toy <toy(a)rtp.ericsson.se> writes: > >>>>> "Martin" == Martin Buchholz <martin(a)xemacs.org> writes: > > Martin> Mixing X11R6.4 and Openwin in the same binary (even > Martin> indirectly) is a good crash recipe. ldd will tell you if > Martin> you're doing this. > > Yes. That's why I've been using only openwin for builds. But my > LD_LIBRARY_PATH points to X11R6.4 so that might be a problem. Using LD_LIBRARY_PATH for anything other than debugging is definitely bad juju (as Martin would say). The last time I built on Solaris I came to the conclusion that the only way to have only one X lib linked in was to use openwin and not mention X11R6.4 anywhere, i.e. specify openwin paths for configure and build & run with empty LD_LIBRARY_PATH. Gunnar

1 participants
0 comments

Re: Solaris and gcc 2.95.2? 23 years, 10 months

Gunnar Evermann

Raymond Toy <toy(a)rtp.ericsson.se> writes: > >>>>> "Robert" == Robert Pluim <rpluim(a)bigfoot.com> writes: > > Robert> Yes. Forcing gcc to use Solaris ld makes dumping work > Robert> again. <sigh> Maybe an entry for the PROBLEMS file? > > How do you do that? I'm assuming I have the same problem since we do > have GNU ld and I'm pretty sure it's getting used. I think the standard advice in the Solaris FAQ is to deinstall GNU binutils Gunnar

1 participants
0 comments

Re: Solaris and gcc 2.95.2? 23 years, 10 months

Raymond Toy

>>>>> "Martin" == Martin Buchholz <martin(a)xemacs.org> writes: Martin> Mixing X11R6.4 and Openwin in the same binary (even indirectly) is a Martin> good crash recipe. ldd will tell you if you're doing this. Yes. That's why I've been using only openwin for builds. But my LD_LIBRARY_PATH points to X11R6.4 so that might be a problem. Martin> If you want to use X11R6.4, then you might as well get (and use) Martin> OpenMotif as well to go with it. And build OpenMotif with X11R6.4. I thought OpenMotif was for Open source stuff where Motif didn't exist. Is it ok to build this on a Solaris box with real Motif? (I didn't follow the OpenMotif announcements.) I supposed I could try Lesstif. Lesstif works ok for me on my Linux box. Ray

1 participants
0 comments

package comments 23 years, 10 months

Simon Josefsson

I installed XEmacs 21.2 and tried to use the package system... ...some comments: * Invoking "Update package index" pop up a file browser window on the remote ftp site. Is that the intention? Am I supposed to be able to intelligble chose something different than "package-index.LATEST.pgp"? The file browser isn't very user friendly, especially since the view is crowded with all package tar-files. * It says the "package-get entries not PGP signed", is that a problem with the package-index.LATEST.pgp file perhaps? * If you don't select a download site first, Tools->Packages->List'n'Install signals the following. Perhaps an error message would be nice. Signaling: (wrong-type-argument stringp nil) expand-file-name(nil) package-get-update-base(nil t) package-get-require-base(t) ... call-interactively(pui-list-packages) * It would be nice if the download location was saved between sessions. * If you don't have ~/.xemacs/ getting the index file fails with error below. It would be nice not to require ~/.xemacs, and place the index file in /tmp or something. Signaling: (error "/root/.xemacs/ is not a directory") signal(error ("/root/.xemacs/ is not a directory")) cerror("%s is not a directory" "/root/.xemacs/") apply(cerror "%s is not a directory" "/root/.xemacs/") error("%s is not a directory" "/root/.xemacs/") basic-save-buffer-1() basic-save-buffer() save-buffer() write-file("~root/.xemacs/package-index.LATEST.pgp") package-get-maybe-save-index("/anonymous＠ftp.xemacs.org:/pub/xemacs/packages/package-index.LATEST.pgp") #<compiled-function (&optional db-file force-current) "...(62)" [force-current buf db-file expand-file-name package-get-locate-index-file file-exists-p error "Package-get database file `%s' does not exist" file-readable-p "Package-get database file `%s' not readable" get-buffer-create "*package database*" (...) erase-buffer insert-file-contents-literally package-get-update-base-from-buffer file-remote-p package-get-maybe-save-index] 3 ("/usr/local/lib/xemacs-21.2-b40/lisp/package-get.elc" . 10688) (let (...) (list ...))>("/anonymous＠ftp.xemacs.org:pub/xemacs/packages/package-index.LATEST.pgp") call-interactively(package-get-update-base)

2 participants
1 comments

Pre-Release Packages. 23 years, 10 months

Steve Youngs

Hey There People. Good news, and bad news... The bad news is that if you installed the Pre-Release Packages from my announcement of a few days ago you could be in for some trouble. They were built using a broken byte-compiler. Sorry about that, but I didn't know it was broken until *after* I had uploaded all the packages. The good news is that I have replaced all the packages in Pre-Releases with ones built with a working byte-compiler. Oh, and I snuck in a couple of minor updates to a couple of packages. Go get 'em! They're in ftp.xemacs.org/pub/xemacs/beta/experimental/packages/ I'd like to release these packages to the public this time next week, so if you find anything that's broken please let me know. -- |---<Steve Youngs>---------------<GnuPG KeyID: 9E7E2820>---| | XEmacs - It's not just an editor. | | It's a way of life. | |------------------------------------<youngs(a)xemacs.org>---|

1 participants
0 comments

Re: overloading of M-BS in PSGML/HTML mode 23 years, 10 months

Lennart Staflin

Adrian Aichner <adrian(a)xemacs.org> writes: | >>>>> "Simon" == Simon Josefsson <sj(a)extundo.com> writes: | | Simon> I often use M-BS to delete a word I've just typed. The | Simon> command seem to be part of the basic editing functionality | Simon> (ie available in fundamental/text mode). However, PGSML | Simon> seem to overload this command to do | Simon> `sgml-mark-current-element'. Since the HTML mode is based | Simon> on PSGML, I find it annoying to write any text in | Simon> html-mode... Of course I could rebind the key or change to | Simon> text-mode, but wouldn't it be nice if PSGML didn't overload | Simon> basic editing keys? What i try to do is bind M-C-h, this is consistent with lisp-mode bindings. I suppose there is some problem here because in ascii C-h is BS. | I have noticed, but not diagnosed, this too. | | I have just entered a bug report for this. | | Please see | http://sourceforge.net/bugs/?func=detailbug&bug_id=128568&group_id=9156 | | Lennart is this the right place, and way, to submit PSGML bugs? Yes, why not. -- Lennart Staflin <lennarts(a)infotek.no> /*/ STEP Infotek AS http://www.infotek.no/

2 participants
1 comments

Xemacs 21.2.40 dies when pressing one of OK/Cancel button in the file selection dialog 23 years, 10 months

Dr. Volker Zell

This bug report will be sent to the XEmacs Development Team, not to your local site managers!! Please write in English, because the XEmacs maintainers do not have translators to read other languages for them. In XEmacs 21.2 (beta40) "Persephone" [Lucid] (i686-pc-cygwin, Mule) of Mon Jan 8 2001 on VZELL configured using `configure --with-mule --package-path=/usr/local/lib/xemacs/site-packages:/usr/local/lib/xemacs/xemacs-packages:/usr/local/lib/xemacs/mule-packages --cppflags=-I/usr/local/include --with_file_coding=yes' Please describe exactly what actions triggered the bug and the precise symptoms of the bug: Everytime I use the graphical find-find and press one of the buttons OK or Cancel Xemacs just dies without any further information. Only gnuserv stays running and eats 100% CPU. System: WinNT 4.0/SP6 - 196 MB Ram Cygwin 1.1.6 - everything mounted binary, - CYGWIN = tty title binmode ntea nontsec Recent keystrokes: button1 button1up misc-user RET y button2 button2up next n n C-x 1 C-home down E down SPC SPC E down SPC SPC BS down SPC SPC SPC SPC SPC down SPC SPC BS down SPC SPC down down SPC E down SPC SPC SPC SPC SPC SPC E down SPC E down down down down SPC SPC SPC SPC E down SPC SPC SPC E down E down E down E down E down E down down SPC SPC E q y up C-x m C-x k RET misc- user Recent messages (most recent first): Loading emacsbug...done Loading emacsbug... Loading mail-abbrevs...done Loading mail-abbrevs... Expunge articles in group `INBOX/xemacs'? (y or n) Yes Expunge articles in group `INBOX/xemacs'? (y or n) nnimap: Setting marks in INBOX/xemacs...done nnimap: Setting marks in INBOX/xemacs... nnimap: Setting marks in INBOX/xemacs...done nnimap: Setting marks in INBOX/xemacs... Ciao Volker

2 participants
1 comments

Core Dump on make install latest 21.2 from CVS 23 years, 10 months

Vin Shelton

I can not install 21.2 from CVS; make install gets the following error: make[1]: Entering directory `/usr/local/build/xemacs-21.2-2001-01-14/src' ./temacs -nd -batch -l /usr/local/src/xemacs-21.2-2001-01-14/src/../lisp/update-elc.el Loading /usr/local/src/xemacs-21.2-2001-01-14/src/../lisp/update-elc.el... Loading very-early-lisp... Loading find-paths.el... Loading packages.el... Loading setup-paths.el... Loading dump-paths.el... Symbol's value as variable is void: paths-load-path-depth rm -f ../lib-src/DOC; \ ./temacs -nd -batch -l /usr/local/src/xemacs-21.2-2001-01-14/src/../lisp/make-docfile.el -- \ -o ../lib-src/DOC -d /usr/local/src/xemacs-21.2-2001-01-14/src -i ../lib-src/../site-packages \ abbrev.c alloc.c blocktype.c buffer.c bytecode.c callint.c callproc.c casefiddle.c casetab.c chartab.c cmdloop.c cmds.c console.c console-stream.c data.c device.c dired.c doc.c doprnt.c dynarr.c editfns.c elhash.c emacs.c eval.c events.c filelock.c unexelf.c balloon_help.c balloon-x.c eldap.c dgif_lib.c gif_io.c menubar.c scrollbar.c toolbar.c menubar-x.c scrollbar-x.c toolbar-x.c gui-x.c realpath.c getloadavg.c inline.c linuxplay.c esd.c miscplay.c console-tty.c device-tty.c event-tty.c frame-tty.c objects-tty.c redisplay-tty.c cm.c terminfo.c gpmevent.c event-unixoid.c database.c sysdll.c emodules.c process-unix.c event-stream.c extents.c faces.c fileio.c filemode.c floatfns.c fns.c font-lock.c frame.c general.c glyphs.c glyphs-eimage.c glyphs-widget.c gui.c gutter.c hash.c imgproc.c indent.c insdel.c intl.c keymap.c line-number.c lread.c lstream.c macros.c marker.c md5.c minibuf.c objects.c opaque.c print.c process.c profile.c rangetab.c redisplay.c redisplay-output.c regex.c search.c select.c signal.c sound.c specifier.c strftime.c symbols.c syntax.c sysdep.c undo.c console-x.c device-x.c event-Xt.c frame-x.c glyphs-x.c objects-x.c redisplay-x.c select-x.c xgccache.c widget.c window.c Loading /usr/local/src/xemacs-21.2-2001-01-14/src/../lisp/make-docfile.el... Loading very-early-lisp... Loading find-paths.el... Loading packages.el... Loading setup-paths.el... Loading dump-paths.el... Symbol's value as variable is void: paths-load-path-depth ./temacs -nd -batch -l /usr/local/src/xemacs-21.2-2001-01-14/src/../lisp/loadup.el dump Loading /usr/local/src/xemacs-21.2-2001-01-14/src/../lisp/loadup.el... Using load-path (/usr/local/build/xemacs-21.2-2001-01-14/lisp) Using module-load-path (/usr/local/build/xemacs-21.2-2001-01-14/modules) Loading very-early-lisp... Loading /usr/local/build/xemacs-21.2-2001-01-14/lisp/dumped-lisp.el... Loading /usr/local/build/xemacs-21.2-2001-01-14/lisp/backquote.elc... Loading /usr/local/build/xemacs-21.2-2001-01-14/lisp/bytecomp-runtime.elc... Loading /usr/local/build/xemacs-21.2-2001-01-14/lisp/find-paths.elc... Loading /usr/local/build/xemacs-21.2-2001-01-14/lisp/packages.elc... Loading /usr/local/build/xemacs-21.2-2001-01-14/lisp/setup-paths.elc... Loading /usr/local/build/xemacs-21.2-2001-01-14/lisp/dump-paths.elc...*** Error in XEmacs initialization (void-variable paths-load-path-depth) *** Backtrace really-early-error-handler((void-variable paths-load-path-depth)) # bind (env-module-path envvar-value site-module-directory module-directory root) paths-construct-module-load-path(("/usr/local/build/xemacs-21.2-2001-01-14/" "/usr/local/xemacs-21.2-2001-01-14/") "/usr/local/xemacs-21.2-2001-01-14/lib/xemacs-21.2-b40/i686-pc-linux/" "/usr/local/xemacs-21.2-2001-01-14/lib/xemacs/site-modules/") # bind (debug-paths roots) byte-code("..." [site-directory lisp-directory late-package-load-path late-packages debug-paths roots getenv "EMACSDEBUGPATHS" t paths-find-emacs-roots princ format "XEmacs thinks the roots of its hierarchy are:\n%S\n" packages-compute-package-locations paths-construct-path ("~" ".xemacs") packages-find-packages packages-find-package-load-path "configure-package-path:\n%S\n" external-debugging-output "late-packages and late-package-load-path:\n%S\n%S\n" paths-find-lisp-directory "lisp-directory:\n%S\n" paths-find-site-lisp-directory "site-directory:\n%S\n" paths-construct-load-path nil paths-find-module-directory "module-directory:\n%S\n" paths-find-site-module-directory "site-module-directory:\n%S\n" paths-construct-module-load-path module-directory site-module-directory package-locations inhibit-site-lisp inhibit-site-modules invocation-directory invocation-name stuff configure-package-path load-path module-load-path] 8) # bind (current-load-list) # (unwind-protect ...) # bind (load-file-name) # (unwind-protect ...) # (unwind-protect ...) # (unwind-protect ...) # (unwind-protect ...) # (unwind-protect ...) load("/usr/local/build/xemacs-21.2-2001-01-14/lisp/dump-paths.elc") (prog1 (load full-path) (unless (memq ... internal-error-checking) (garbage-collect))) (if full-path (prog1 (load full-path) (unless ... ...)) (external-debugging-output (format "\nLoad file %s: not found\n" file)) nil) # bind (full-path) (let ((full-path ...)) (if full-path (prog1 ... ...) (external-debugging-output ...) nil)) # bind (file) pureload("dump-paths") (if (pureload file) nil (external-debugging-output "Fatal error during load, aborting") (kill-emacs 1)) (unless (pureload file) (external-debugging-output "Fatal error during load, aborting") (kill-emacs 1)) (while (setq file (car files)) (unless (pureload file) (external-debugging-output "Fatal error during load, aborting") (kill-emacs 1)) (setq files (cdr files))) # bind (file files) (let ((files preloaded-file-list) file) (while (setq file ...) (unless ... ... ...) (setq files ...)) (when (not ...) (defun toolbar-button-p ... "No toolbar support." nil) (defun toolbar-specifier-p ... "No toolbar support." nil)) (fmakunbound (quote pureload))) (lambda nil (setq Installation-string (save-current-buffer ... ... ... ... ...)) (let (...) (setq load-path ...) (setq module-load-path ...)) (external-debugging-output (format "\nUsing load-path %s" load-path)) (external-debugging-output (format "\nUsing module-load-path %s" module-load-path)) (buffer-disable-undo (get-buffer "*scratch*")) (load "very-early-lisp" nil t) (let (...) (setq load-path ...)) (setq load-warn-when-source-newer t load-warn-when-source-only t) (defun pureload (file) (let ... ...)) (load (expand-file-name "../lisp/dumped-lisp.el")) (let (... file) (while ... ... ...) (when ... ... ...) (fmakunbound ...)) (packages-load-package-dumped-lisps late-package-load-path))() # (unwind-protect ...) call-with-condition-handler(really-early-error-handler (lambda nil (setq Installation-string (save-current-buffer ... ... ... ... ...)) (let (...) (setq load-path ...) (setq module-load-path ...)) (external-debugging-output (format "\nUsing load-path %s" load-path)) (external-debugging-output (format "\nUsing module-load-path %s" module-load-path)) (buffer-disable-undo (get-buffer "*scratch*")) (load "very-early-lisp" nil t) (let (...) (setq load-path ...)) (setq load-warn-when-source-newer t load-warn-when-source-only t) (defun pureload (file) (let ... ...)) (load (expand-file-name "../lisp/dumped-lisp.el")) (let (... file) (while ... ... ...) (when ... ... ...) (fmakunbound ...)) (packages-load-package-dumped-lisps late-package-load-path))) # bind (gc-cons-threshold) (let ((gc-cons-threshold ...)) (call-with-condition-handler (quote really-early-error-handler) (function ...)) (setq preloaded-file-list (mapcar ... preloaded-file-list)) (setq load-warn-when-source-newer t load-warn-when-source-only nil) (setq debugger (quote debug)) (when (member "no-site-file" command-line-args) (setq site-start-file nil)) (when (load "site-load" t) (garbage-collect)) (when purify-flag (message "Finding pointers to doc strings...") (Snarf-documentation "DOC") (message "Finding pointers to doc strings...done") (Verify-documentation)) (when (stringp site-start-file) (load "site-init" t)) (setq current-load-list nil) (garbage-collect) (buffer-enable-undo "*scratch*")) # bind (current-load-list) # (unwind-protect ...) # bind (load-file-name) # (unwind-protect ...) # (unwind-protect ...) # (unwind-protect ...) # (unwind-protect ...) # (unwind-protect ...) load("/usr/local/src/xemacs-21.2-2001-01-14/src/../lisp/loadup.el") # (condition-case ... . error) # (catch top-level ...) *** Killing XEmacs make[1]: *** [xemacs] Error 255 make[1]: Leaving directory `/usr/local/build/xemacs-21.2-2001-01-14/src' make: *** [install-arch-dep] Error 2 Here is the contents of my Installation file: uname -a: Linux zion.rcn.com 2.2.18 #2 SMP Mon Dec 11 21:52:20 EST 2000 i686 unknown /usr/local/src/xemacs-21.2-2001-01-14/configure '--prefix=/usr/local/xemacs-21.2-2001-01-14' '--with-gcc' '--site-includes=/usr/local/include' '--site-libraries=/usr/local/lib' '--infopath=/usr/local/info' '--with-mule=no' '--compiler=/usr/local/gcc-2.95.3-2001-01-12/bin/gcc' '--cflags=-O3 -malign-double -pipe -march=pentiumpro -mcpu=pentiumpro -ffast-math -fno-exceptions' '--with-dialogs=no' '--with-widgets=no' '--package-path=/usr/local/site-packages::/usr/local/xemacs-packages' '--debug=no' '--error-checking=none' XEmacs 21.2-b40 "Persephone" configured for `i686-pc-linux'. Compilation / Installation: Source code location: /usr/local/src/xemacs-21.2-2001-01-14 Installation prefix: /usr/local/xemacs-21.2-2001-01-14 Additional header files: /usr/local/include Additional libraries: /usr/local/lib Operating system description file: `s/linux.h' Machine description file: `m/intel386.h' Compiler: /usr/local/gcc-2.95.3-2001-01-12/bin/gcc -O3 -malign-double -pipe -march=pentiumpro -mcpu=pentiumpro -ffast-math -fno-exceptions Relocating allocator for buffers: no GNU version of malloc: yes - Using Doug Lea's new malloc from the GNU C Library. Window System: Compiling in support for the X window system: - X Windows headers location: /usr/X11R6/include - X Windows libraries location: /usr/X11R6/lib - Handling WM_COMMAND properly. Using Lucid menubars. Using Lucid scrollbars. TTY: Compiling in support for ncurses. Compiling in support for GPM (General Purpose Mouse). Images: Compiling in support for GIF images (builtin). Compiling in support for XPM images. Compiling in support for PNG images. Compiling in support for JPEG images. Compiling in support for TIFF images. Sound: Compiling in support for sound (native). Compiling in support for ESD (Enlightened Sound Daemon). Databases: Compiling in support for Berkeley database. Compiling in support for LDAP. Internationalization: Mail: Compiling in support for "dot-locking" mail spool file locking method. Other Features: Compiling in support for dynamic shared object modules. - vin

2 participants
1 comments

[Failure] XEmacs 21.2-b40 "Persephone", i586-pc-win32 23 years, 10 months

Adrian Aichner

Building post-21.2.40 from CVS fails. Michael, can you make sense of this? I think Vin reported the same problem for a different platform. Adrian > XEmacs Build Report generated by emacs-version > 21.1.13 "Crater Lake" XEmacs Lucid > with system-configuration > i386-pc-win32 > follows: > Contents of d:\tmp\21.2\xemacs\Installation: > (Output from most recent run of ./configure) OS: Windows_NT XEmacs 21.2-b40 \"Persephone\" configured for `i586-pc-win32'. Building XEmacs in \"d:\\tmp\\21.2\\xemacs\\nt\". Using compiler \"cl -nologo -W3 -O2 -G5 -MD\". Installing XEmacs in \"c:\\XEmacs\\XEmacs-21.2-b40\". Package path is \"~\\.xemacs;;c:\\XEmacs\\site-packages;c:\\XEmacs\\xemacs-packages\". Compiling in support for Microsoft Windows native GUI. Compiling in support for XPM images. Compiling in support for GIF images. Compiling in support for PNG images. Compiling in support for TIFF images. Compiling in support for JPEG images. Compiling in support for X-Face message headers. Compiling in support for toolbars. Compiling in support for dialogs. Compiling in support for widgets. Compiling in support for native sounds. Compiling in fast dired implementation. Using minimal tagbits. Using indexed lrecord implementation. Using portable dumper. Using system malloc. Using DLL version of C runtime library > Contents of d:\tmp\21.2\xemacs\nt\xemacs-make-install.err > keeping lines matching > "^--\[\[\|\]\]$\|^$cd\|n?make$\s-\|errors?\|warnings?\|pure.*$space\|size$\|hides\b\|strange\|shadowings\|^Compil$ing\s-+in\|ation$\|^Using\|not\s-+found\|^While\s-+compiling.*$ \s-+.+$*\|^Note:\|Installing\|[Ff]ile(s) copied\|\s-+tests\s-+" > and then deleting lines matching > "confl.*with.*auto-inlining\|^Formatting:" cd d:\tmp\21.2\xemacs\nt\ nmake /f xemacs.mak INSTALL_DIR="c:\XEmacs\XEmacs-$(XEMACS_VERSION_STRING)" JPEG_DIR="d:\tmp\libs4xemacs\jpeg-6b" MAKEINFO="d:\tmp\texinfo-4.0\makeinfo\makeinfo.exe" PACKAGE_PREFIX="c:\XEmacs" PNG_DIR="d:\tmp\libs4xemacs\libpng-1.0.2" TIFF_DIR="d:\tmp\libs4xemacs\tiff-v3.4" USE_PORTABLE_DUMPER="1" XPM_DIR="d:\tmp\libs4xemacs\xpm-3.4k" ZLIB_DIR="d:\tmp\libs4xemacs\zlib" install Compilation started at Mon Jan 15 00:53:13 2001 WARNING: Compiling without dependency information. Installing XEmacs in \"c:\\XEmacs\\XEmacs-21.2-b40\". 1 file(s) copied. 1 file(s) copied. 1 file(s) copied. d:\tmp\21.2\xemacs\nt\..\src\dumper.c(952) : warning C4090: 'function' : different 'const' qualifiers d:\tmp\21.2\xemacs\nt\..\src\dumper.c(952) : warning C4022: 'dump_add_opaque' : pointer mismatch for actual parameter 1 d:\tmp\21.2\xemacs\nt\..\src\nt.c(1424) : warning C4244: '=' : conversion from 'unsigned long ' to 'short ', possible loss of data d:\tmp\21.2\xemacs\nt\..\src\nt.c(1435) : warning C4244: '=' : conversion from 'unsigned long ' to 'unsigned short ', possible loss of data d:\tmp\21.2\xemacs\nt\..\src\nt.c(1437) : warning C4244: '=' : conversion from 'unsigned long ' to 'unsigned short ', possible loss of data d:\tmp\21.2\xemacs\nt\..\src\search.c(1558) : warning C4244: '=' : conversion from 'long ' to 'unsigned char ', possible loss of data d:\tmp\21.2\xemacs\nt\..\src\search.c(1643) : warning C4244: '=' : conversion from 'long ' to 'unsigned char ', possible loss of data WARNING: Compiling without dependency information. Using load-path (d:\tmp\21.2\xemacs\lisp) Using module-load-path (d:\tmp\21.2\xemacs\modules) Loading d:\tmp\21.2\xemacs\lisp\dump-paths.el...*** Error in XEmacs initialization really-early-error-handler((void-variable paths-load-path-depth)) (prog1 (load full-path) (unless (memq ... internal-error-checking) (garbage-collect))) (if full-path (prog1 (load full-path) (unless ... ...)) (external-debugging-output (format "\nLoad file %s: not found\n" file)) nil) (if (pureload file) nil (external-debugging-output "Fatal error during load, aborting") (kill-emacs 1)) (unless (pureload file) (external-debugging-output "Fatal error during load, aborting") (kill-emacs 1)) (while (setq file (car files)) (unless (pureload file) (external-debugging-output "Fatal error during load, aborting") (kill-emacs 1)) (setq files (cdr files))) call-with-condition-handler(really-early-error-handler (lambda nil (setq Installation-string (save-current-buffer ... ... ... ... ...)) (let (...) (setq load-path ...) (setq module-load-path ...)) (external-debugging-output (format "\nUsing load-path %s" load-path)) (external-debugging-output (format "\nUsing module-load-path %s" module-load-path)) (buffer-disable-undo (get-buffer "*scratch*")) (load "very-early-lisp" nil t) (let (...) (setq load-path ...)) (setq load-warn-when-source-newer t load-warn-when-source-only t) (defun pureload (file) (let ... ...)) (load (expand-file-name "../lisp/dumped-lisp.el")) (let (... file) (while ... ... ...) (when ... ... ...) (fmakunbound ...)) (packages-load-package-dumped-lisps late-package-load-path))) (let ((gc-cons-threshold ...)) (call-with-condition-handler (quote really-early-error-handler) (function ...)) (setq preloaded-file-list (mapcar ... preloaded-file-list)) (setq load-warn-when-source-newer t load-warn-when-source-only nil) (setq debugger (quote debug)) (when (member "no-site-file" command-line-args) (setq site-start-file nil)) (when (load "site-load" t) (garbage-collect)) (when purify-flag (message "Finding pointers to doc strings...") (Snarf-documentation "DOC") (message "Finding pointers to doc strings...done") (Verify-documentation)) (when (stringp site-start-file) (load "site-init" t)) (setq current-load-list nil) (garbage-collect) (buffer-enable-undo "*scratch*")) # (condition-case ... . error) NMAKE : fatal error U1077: '"d:\tmp\21.2\xemacs\nt\..\lib-src\i"' : return code '0xffffffff' Compilation exited abnormally with code 2 at Mon Jan 15 01:01:34 -- Adrian Aichner <adrian(a)xemacs.org>

2 participants
1 comments

scroll-up broken in XEmacs-21.2.40 compiled on AIX v4.3.2 23 years, 10 months

Mike Berkley

This bug report will be sent to the XEmacs Development Team, not to your local site managers!! Please write in English, because the XEmacs maintainers do not have translators to read other languages for them. In XEmacs 21.2 (beta40) "Persephone" [Lucid] (rs6000-ibm-aix4.3.2.0) of Thu Jan 11 2001 on sp05.cccma.bc.ec.gc.ca configured using `configure --cflags=-g --with-gcc=no --with-cde=no --with-tooltalk=no --with-dragndrop=no --mail-locking=file --with-xpm --site-includes=/usr/local/include --site-libraries=/usr/local/lib --with-menubars=lucid --with-dialogs=athena --with-athena=xaw --with-widgets=no --error-checking=none --debug=no' Please describe exactly what actions triggered the bug and the precise symptoms of the bug: With xemacs v21.2.40 configured and compiled as above, scroll-up does not work. I first noticed the problem in view-mode (where scroll-up is bound to "space"), but the problem happens in non-view-mode windows (where scroll-up is bound to ^V). XEmacs is quite difficult to use without scroll-up, so I don't know if there are any other problems. This problem can be demonstrated in "xemacs -vanilla". Recent keystrokes: not-applicable. Recent messages (most recent first): Parsing /home/mberkley/.mailrc... Loading mail-abbrevs...done Loading mail-abbrevs... Loading emacsbug...done Loading emacsbug...

1 participants
0 comments

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta January 2001