April 1998 - XEmacs-Beta - XEmacs Mailing List Archives

[PATCH] Re: More installation lossage 26 years, 7 months

Michael Sperber

Here's another round, making path searching Even Smarter (tm). Steve, this should make your installation layout work. It also contains a patch of x-menubar.el which I sent earlier but didn't make it into Pygmy-pre2 but does have a ChangeLog entry there. ChangeLog 1998-04-25 Michael Sperber [Mr. Preprocessor] <sperber(a)informatik.uni-tuebingen.de> * configure.in: Sychronized ..._USER_DEFINED variables with datadir setting. * Makefile.in (mkdir): No longer create sitelispdir. src/ChangeLog 1998-04-25 Michael Sperber [Mr. Preprocessor] <sperber(a)informatik.uni-tuebingen.de> * emacs.c (complex_vars_of_emacs): Typo fixes. * emacs.c: Added configure-exec-prefix-directory. * paths.h.in: Added PATH_EXEC_PREFIX. lisp/ChangeLog 1998-04-25 Michael Sperber [Mr. Preprocessor] <sperber(a)informatik.uni-tuebingen.de> * setup-paths.el, find-paths.el: Removed uses of `not' which temacs doesn't have. * find-paths.el (paths-find-emacs-roots): Included exec-prefix into root searching. Index: Makefile.in =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/Makefile.in,v retrieving revision 1.52 diff -u -r1.52 Makefile.in --- Makefile.in 1998/04/18 07:31:35 1.52 +++ Makefile.in 1998/04/25 22:14:11 ＠＠ -453,7 +453,7 ＠＠ ## make-path instead of mkdir. Not all mkdirs have the `-p' flag. mkdir: FRC.mkdir ${MAKEPATH} ${COPYDESTS} ${lockdir} ${infodir} ${archlibdir} \ - ${mandir} ${bindir} ${datadir} ${libdir} ${sitelispdir} ${pkgdir} + ${mandir} ${bindir} ${datadir} ${libdir} ${pkgdir} -chmod 0777 ${lockdir} ## Delete all the installed files that the `install' target would Index: configure.in =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/configure.in,v retrieving revision 1.92 diff -u -r1.92 configure.in --- configure.in 1998/04/24 21:33:57 1.92 +++ configure.in 1998/04/25 22:14:43 ＠＠ -269,6 +269,8 ＠＠ dnl and all the variables that are supposed to be based on exec_prefix dnl by default will actually change. dnl Use braces instead of parens because sh, perl, etc. also accept them. +dnl If you change these, you need to synchronize with the settings of the +dnl various ..._USER_DEFINED variables further down. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' ＠＠ -692,18 +694,19 ＠＠ fi eval "$opt=\"$val\"" - dnl Changing exec_prefix or libdir will change the default value - dnl of archlibdir. Changing datadir will change the default value - dnl of etcdir and lispdir. Changing statedir will change the - dnl default value of lockdir. - case "$opt" in + dnl You need to synchronize this with the way the + dnl default values are built. + case "$opt" in lispdir ) AC_DEFINE(LISPDIR_USER_DEFINED) ;; dnl sitelispdir ) AC_DEFINE(SITELISPDIR_USER_DEFINED) ;; etcdir ) AC_DEFINE(ETCDIR_USER_DEFINED) ;; infodir ) AC_DEFINE(INFODIR_USER_DEFINED) ;; infopath ) AC_DEFINE(INFOPATH_USER_DEFINED) ;; package_path ) AC_DEFINE(PACKAGE_PATH_USER_DEFINED) ;; - datadir ) AC_DEFINE(ETCDIR_USER_DEFINED) ;; + datadir ) + AC_DEFINE(INFODIR_USER_DEFINED) + AC_DEFINE(LISPDIR_USER_DEFINED) + AC_DEFINE(ETCDIR_USER_DEFINED) ;; statedir | lockdir ) AC_DEFINE(LOCKDIR_USER_DEFINED) ;; exec_prefix | libdir | archlibdir ) AC_DEFINE(ARCHLIBDIR_USER_DEFINED) ;; esac ＠＠ -3539,8 +3542,8 ＠＠ AC_SUBST(infodir) AC_SUBST(INFODIR_USER_DEFINED) -dnl Yo, Stephen Bourne! I want to marry you! INFODIR=$infodir +dnl Yo, Stephen Bourne! I want to marry you! while true; do case "$INFODIR" in *\$* ) eval "INFODIR=$INFODIR" ;; Index: lisp/find-paths.el =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/lisp/find-paths.el,v retrieving revision 1.6 diff -u -r1.6 find-paths.el --- find-paths.el 1998/04/18 07:31:47 1.6 +++ find-paths.el 1998/04/25 22:14:48 ＠＠ -243,11 +243,11 ＠＠ (append list-1 (reverse reverse-survivors)))) -(defun paths-delete (predicate list) +(defun paths-filter (predicate list) "Delete all matches of PREDICATE from LIST." (let ((reverse-result '())) (while list - (if (not (funcall predicate (car list))) + (if (funcall predicate (car list)) (setq reverse-result (cons (car list) reverse-result))) (setq list (cdr list))) (nreverse reverse-result))) ＠＠ -265,24 +265,30 ＠＠ (file-name-as-directory component))) components))) (if drop-empties - (paths-delete #'(lambda (component) - (string-equal "" component)) + (paths-filter #'(lambda (component) + (null (string-equal "" component))) directories) directories))) (defun paths-find-emacs-roots (invocation-directory invocation-name) "Find all plausible installation roots for XEmacs." - (let ((invocation-root - (paths-find-emacs-root invocation-directory invocation-name)) - (installation-root - (and configure-prefix-directory - (file-directory-p configure-prefix-directory) - (file-name-as-directory configure-prefix-directory)))) - (append (and invocation-root - (list invocation-root)) - (and installation-root - (paths-emacs-root-p installation-root) - (list installation-root))))) + (let* ((potential-invocation-root + (paths-find-emacs-root invocation-directory invocation-name)) + (invocation-roots + (and potential-invocation-root + (list potential-invocation-root))) + (potential-installation-roots + (paths-uniq-append + (and configure-exec-prefix-directory + (list (file-name-as-directory + configure-exec-prefix-directory))) + (and configure-prefix-directory + (list (file-name-as-directory + configure-prefix-directory))))) + (installation-roots + (paths-filter #'paths-emacs-root-p potential-installation-roots))) + (paths-uniq-append invocation-roots + installation-roots))) ;;; find-paths.el ends here Index: lisp/setup-paths.el =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/lisp/setup-paths.el,v retrieving revision 1.10 diff -u -r1.10 setup-paths.el --- setup-paths.el 1998/04/24 21:34:05 1.10 +++ setup-paths.el 1998/04/25 22:14:48 ＠＠ -98,7 +98,7 ＠＠ (packages-find-package-info-path last-packages) (and info-path-envval (paths-decode-directory-path info-path-envval 'drop-empties))) - (and (not info-path-envval) + (and (null info-path-envval) (paths-uniq-append (paths-directories-which-exist configure-info-path) (paths-directories-which-exist paths-default-info-directories)))))) Index: lisp/x-menubar.el =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/lisp/x-menubar.el,v retrieving revision 1.19 diff -u -r1.19 x-menubar.el --- x-menubar.el 1998/04/24 21:34:07 1.19 +++ x-menubar.el 1998/04/25 22:14:58 ＠＠ -570,7 +570,8 ＠＠ (customize-set-variable 'font-menu-this-frame-only-p (not font-menu-this-frame-only-p)) :style toggle - :selected font-menu-this-frame-only-p] + :selected (and (boundp 'font-menu-this-frame-only-p) + font-menu-this-frame-only-p)] ,＠(if (featurep 'scrollbar) '(["Scrollbars" (customize-set-variable 'scrollbars-visible-p Index: src/emacs.c =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/src/emacs.c,v retrieving revision 1.68 diff -u -r1.68 emacs.c --- emacs.c 1998/04/24 21:34:17 1.68 +++ emacs.c 1998/04/25 22:15:22 ＠＠ -145,7 +145,7 ＠＠ Lisp_Object Vinternal_error_checking; /* The default base directory XEmacs is installed under. */ -Lisp_Object Vconfigure_prefix_directory; +Lisp_Object Vconfigure_exec_prefix_directory, Vconfigure_prefix_directory; /* If nonzero, set XEmacs to run at this priority. This is also used in child_setup and sys_suspend to make sure subshells run at normal ＠＠ -2810,7 +2810,7 ＠＠ DEFVAR_LISP ("configure-package-path", &Vconfigure_package_path /* For internal use by the build procedure only. -configure's idea of what PACKAGE-DIRECTORY will be. +configure's idea of what the package path will be. */ ); #ifdef PATH_PACKAGEPATH Vconfigure_package_path = decode_path (PATH_PACKAGEPATH); ＠＠ -2887,6 +2887,17 ＠＠ (build_string ((char *) PATH_DOC)); #else Vconfigure_doc_directory = Qnil; +#endif + + DEFVAR_LISP ("configure-exec-prefix-directory", &Vconfigure_exec_prefix_directory /* +For internal use by the build procedure only. +configure's idea of what EXEC-PREFIX-DIRECTORY will be. +*/ ); +#ifdef PATH_EXEC_PREFIX + Vconfigure_exec_prefix_directory = Ffile_name_as_directory + (build_string ((char *) PATH_EXEC_PREFIX)); +#else + Vconfigure_exec_prefix_directory = Qnil; #endif DEFVAR_LISP ("configure-prefix-directory", &Vconfigure_prefix_directory /* Index: src/paths.h.in =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/src/paths.h.in,v retrieving revision 1.5 diff -u -r1.5 paths.h.in --- paths.h.in 1998/04/14 07:04:38 1.5 +++ paths.h.in 1998/04/25 22:15:23 ＠＠ -24,8 +24,9 ＠＠ If it defines anything, this file should define some subset of the following: - PATH_PREFIX The default value of `prefix-directory'. This is the - default root for everything. + PATH_EXEC_PREFIX The value of --exec-prefix. + + PATH_PREFIX The value of --prefix. PATH_LOADSEARCH The default value of `load-path'. ＠＠ -51,6 +52,8 ＠＠ PATH_INFOPATH The default value of `Info-directory-list'. These are additional places info files are searched for. */ + +#define PATH_EXEC_PREFIX "＠exec_prefix＠" #define PATH_PREFIX "＠prefix＠" -- Cheers =8-} Chipsy Friede, Völkerverständigung und überhaupt blabla

1 participants
0 comments

[PATCH] fix signal event handling for cygwin event loop 26 years, 7 months

Andy Piper

This should fix problems with signals & events under cygwin with the special select() (e.g. detecting process death). andy Sat Apr 24 1998 Andy Piper <andyp(a)parallax.co.uk> * event-msw.c: fix and enable signal pipe handling when using msg select().

1 participants
0 comments

Re: More installation lossage 26 years, 7 months

Michael Sperber

>>>>> "sb" == SL Baur <steve(a)xemacs.org> writes: sb> Configuring with sb> --prefix=/some/where sb> --exec-prefix=/some/where/BINARIES sb> --datadir=/some/where sb> results in an XEmacs that cannot find its own lisp directories. Rgrmmm ... this is due to a disgusting historical remnant connected with --datadir. What configure calls --datadir is almost entirely unlike `data-directory' in the running XEmacs. `data-directory' is actually --etcdir in configure. I'll send the fix as soon as I the sample builds finish. -- Cheers =8-} Chipsy Friede, Völkerverständigung und überhaupt blabla

1 participants
0 comments

[PATCH] Typo in Pygmy-pre2 26 years, 7 months

Michael Sperber

I had to do this to make it compile. 1998-04-25 Michael Sperber [Mr. Preprocessor] <sperber(a)informatik.uni-tuebingen.de> * process-unix.c (allocate_pty): Typo fix. Index: src/process-unix.c =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/src/process-unix.c,v retrieving revision 1.6 diff -u -r1.6 process-unix.c --- process-unix.c 1998/04/24 21:34:23 1.6 +++ process-unix.c 1998/04/25 20:48:57 ＠＠ -216,11 +216,11 ＠＠ #endif int i; int fd; + int c; #ifdef PTY_ITERATION PTY_ITERATION #else - int c; for (c = FIRST_PTY_LETTER; c <= 'z'; c++) for (i = 0; i < 16; i++) #endif -- Cheers =8-} Chipsy Friede, Völkerverständigung und überhaupt blabla

1 participants
0 comments

[jerry@cs.ucsb.edu (Jeremiah W. James)] [20.4] Irix 5.3 build troubles solved ... sort of 26 years, 7 months

Martin Buchholz

Could some Irix person follow up on this? Martin ------- Start of forwarded message ------- Date: Sat Apr 25 01:14:09 1998 From: jerry(a)cs.ucsb.edu (Jeremiah W. James) Subject: [20.4] Irix 5.3 build troubles solved ... sort of Topics: [20.4] Irix 5.3 build troubles solved ... sort of ---------------------------------------------------------------------- Date: 22 Apr 1998 15:33:08 -0700 From: jerry(a)cs.ucsb.edu (Jeremiah W. James) Subject: [20.4] Irix 5.3 build troubles solved ... sort of Message-ID: <tprlnsxcwrf.fsf(a)cs.ucsb.edu> Content-Type: text/plain; charset=US-ASCII I mentioned a problem with the dumped xemacs (version 20.4) seg faulting on Irix 5.3 a while ago, and even talked with a few of the maintainers via email about it for a time. Well, I finally have an explanation and a partial solution to the problem. Here's what happens. First, temacs is built and then runs. Its job is to initialize a bunch of stuff, and especially to preload some lisp files. Then it dumps an image of itself into the xemacs executable. When you run xemacs, it starts up with a bunch of stuff already set to go, greatly reducing startup time. The dumping process has to avoid a pitfall relating to bss sections. Uninitialized variables go into the .bss section, which is zero-filled by the loader when the program is run. Since xemacs was dumped with runtime values that need to be restored, you don't want those variables zero-filled when xemacs starts up. The solution is to create a new data section, copy the contents of the .bss section to the new data section, and then use that same data section to hold the preloaded Lisp files. A zero-length .bss section is written out to the final executable, to avoid trouble with loaders that expect to find one. All this is fine. The trouble I encountered arises from the .sbss (for "small bss") section. The idea is to put small uninitialized data items into this section, set aside one register (the global pointer) to point into it, and use 16-bit offsets from that register to access those data items, rather than full 32-bit pointers. This results in smaller (and hopefully faster) code. The unexelfsgi.c file contains a supposed solution to the .sbss problem. It sets a flag on that section which is supposed to tell the loader that it is a data section, rather than a .bss section. The loader is supposed to see that flag and skip the zero filling process. It doesn't work. The seg faults I was seeing resulted from the .sbss section being zero-filled. Unfortunately, _heapbase lived in .sbss, so the first heap access tried to dereference a null pointer. Instant flaming death followed. It turns out that the loader completely ignores the flags on the .sbss section. It looks for sections *named* .bss and .sbss, and zero fills them, regardless of flags. This happens on Irix 5.3, with both an unpatched machine and one with the latest recommended patchset from SGI. I would like to know what version of Irix was used by Olivier Galibert (who wrote the .sbss support). It seems it wasn't 5.3. The solution to the problem is to pull a trick similar to the one for .bss. That is, create a new (small) data section, and copy .sbss into it. I think in this case it should be safe to discard the .sbss section completely, rather than creating a zero-length .sbss. Unfortunately, this task is somewhat beyond the current state of my knowledge. Is there anybody out there who could do this? Temporary workaround: compile with -G 0. That tells the compiler/linker to not create an .sbss section in the first place. This is the solution I employed to finally get a working XEmacs 20.4 on Irix 5.3. Note that - G defaults to zero on some systems, so some people will never see the problem at all. Also, -G 0 is not needed (or even wanted) in lib-src since those executables aren't loaded up and dumped. Incidentally, if someone does work on unexelfsgi.c, would you wipe out a few warnings by removing the declaration of new_data2_index from unexec (it isn't set or used anywhere), and removing the zero argument from 5 or 6 calls to fatal? Thanks! - - Jerry James Email: jerry(a)cs.ucsb.edu WWW: http://www.cs.ucsb.edu/~jerry/ ------------------------------ End of forwardayAOYW Digest *************************** ------- End of forwarded message -------

2 participants
1 comments

[PATCH]: Info (bug fixes and new feature) 26 years, 7 months

Oscar Figueiredo

This fixes the bugs signalled by Karl Hegbloom (one still pending) and Stefanie Teufel. The new function `Info-batch-rebuild-dir' calls the info dir autogeneration routines from the command line. I use it to quickly fix outdated dir problems by `su'ing to the admin account and calling it on the command line. Oscar 1998-04-25 Oscar Figueiredo <Oscar.Figueiredo(a)di.epfl.ch> * info.el (Info-parse-dir-entries): Fixed regexp (Info-build-dir-anew): Remove full suffix and capitalize info file name for files with no ＠direntry (Info-batch-rebuild-dir): New function (Info-suffixed-file): Check for regular files instead of simple file existence (could catch directories before)

1 participants
0 comments

[PATCH] Missing variable for irix4/5 26 years, 7 months

Olivier Galibert

Andy has been slightly too trigger happy in his warning elimination. But then, now it is implemented the right way. OG. 1998-04-25 Olivier Galibert <galibert(a)pobox.com> * s/irix5-0.h (PTY_OPEN): Ditto * s/irix4-0.h (PTY_OPEN): Restore the stb variable. Index: src/s/irix4-0.h =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/src/s/irix4-0.h,v retrieving revision 1.5 diff -u -r1.5 irix4-0.h --- irix4-0.h 1998/03/31 20:12:28 1.5 +++ irix4-0.h 1998/04/25 17:29:07 ＠＠ -35,6 +35,7 ＠＠ #define PTY_OPEN \ { \ char *name; \ + struct stat stb; \ EMACS_BLOCK_SIGCHLD; \ name = _getpty (&fd, O_RDWR | O_NDELAY, 0600, 0); \ EMACS_UNBLOCK_SIGCHLD; \ Index: src/s/irix5-0.h =================================================================== RCS file: /usr/CVSroot/XEmacs/xemacs-20/src/s/irix5-0.h,v retrieving revision 1.7 diff -u -r1.7 irix5-0.h --- irix5-0.h 1998/03/31 20:12:28 1.7 +++ irix5-0.h 1998/04/25 17:29:07 ＠＠ -42,6 +42,7 ＠＠ #define PTY_OPEN \ { \ char *name; \ + struct stat stb; \ EMACS_BLOCK_SIGCHLD; \ name = _getpty (&fd, O_RDWR | O_NDELAY, 0600, 0); \ EMACS_UNBLOCK_SIGCHLD; \

1 participants
0 comments

[Success] XEmacs 21.0b37 Pygmy-pre2 on i686-Linux 26 years, 7 months

Nobu Toge

Successful build and run straight out of the box on i686-GNU-Linux, including mule/canna support with/without X-window. Platform ======== Pentium II 333MHz, 192MB RAM. Linux kernel 2.0.33 egcs-2.90.27 980315 (egcs-1.0.2 release) Dump of Installation ==================== uname -a: Linux lcdev.kek.jp 2.0.33 #3 Fri Apr 10 19:58:22 JST 1998 i686 unknown ./configure 'i686-GNU-linux' '--with-gnu-make' '--with-mule' '--with-canna' '--dynam ic=yes' '--debug=no' '--error-checking=malloc' '--cflags=-g -O2 -m486 -fno-strength-r educe -malign-loops=2 -malign-jumps=2 -malign-functions=2 -fno-caller-saves' '--use-u nion-type' '--error-checking=malloc' '--with-site-lisp' '--package-path=/home/toge/NO NRH/XEmacs21.0/packages' XEmacs 21.0-b37 "Pygmy-pre2" configured for `i686-GNU-linux'. Where should the build process find the source code? /home/toge/NONRH/XEmacs21.0 /xemacs-21.0-b36 What installation prefix should install use? /usr/local What operating system and machine description files should XEmacs use? `s/linux.h' and `m/intel386.h' What compiler should XEmacs be built with? gcc -g -O2 -m486 -fno-stren gth-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -fno-caller-saves Should XEmacs use the GNU version of malloc? yes (Using Doug Lea's new malloc from the Linux C Library.) Should XEmacs use the relocating allocator for buffers? yes What window system should XEmacs use? x11 Where do we find X Windows header files? /usr/X11/include Where do we find X Windows libraries? /usr/X11/lib Compiling in support for XAUTH. Compiling in support for XPM images. Compiling in support for X-Face message headers. Compiling in support for JPEG image conversion. Compiling in support for PNG image conversion. Compiling in support for TIFF image conversion. Compiling in native sound support. Compiling in support for Berkeley DB. Compiling in support for GNU DBM. Compiling in support for ncurses. Compiling in support for GPM (General Purpose Mouse). Compiling in Mule (multi-lingual) support. Compiling in XIM (X11R5+ I18N input method) support. Using raw Xlib to provide XIM support. Compiling in support for Canna on Mule. Compiling in support for OffiX. Compiling in support for proper session-management. Using Lucid menubars. Using Lucid scrollbars. Using Athena dialog boxes. Compiling in DLL support. movemail will use "dot-locking" for locking mail spool files. Using the union type for Lisp_Objects. Using Lisp_Objects with minimal tagbits. WARNING: --------------------------------------------------------- WARNING: Compiling in support for runtime error checking. WARNING: XEmacs will run noticeably more slowly as a result. WARNING: Error checking is on by default for XEmacs beta releases. WARNING: --------------------------------------------------------- -- Nobu Toge (toge(a)accad1.kek.jp)

1 participants
0 comments

[Sucess] XEmacs 21.0b37 Pygmy-Pre2 on HPUX 9.05 26 years, 7 months

Nobu Toge

Successful build and run, straight out of the box on HPUX 9.05, including mule/canna support with/without X-window. Platform ======== HPUX 735/9000 running HPUX 9.05. gcc version 2.8.1. Dump of Installation ==================== ~/HPUX/XEmacs210/b36 > more Installation uname -a: HP-UX accad1 A.09.05 A 9000/735 2005266055 two-user license ./configure 'hppa1.1-hp-hpux9.05' '--dynamic=yes' '--prefix=/usr/local' '--with-dialogs=athena' '--with-xface' '--with-tty=yes' '--site-includes=/usr/local/lib/gcc-lib/hppa1.1-hp-hpux9.05/2.8.1/include /usr/local/canna/include' '--error-checking=none' '--with-jpeg' '--with-xpm' '--with-sound=no' '--with-mule' '--with-canna' '--with-xfs' '--with-database=no' '--with-x' '--cflags=-pipe -mpa-risc-1-1 -mschedule=7100 -mjump-in-delay -funroll-loops -O5' '--package-path=/usr/local/lib/xemacspack' XEmacs 21.0-b37 "Pygmy-pre2" configured for `hppa1.1-hp-hpux9.05'. Where should the build process find the source code? /users4/toge/HPUX/XEmacs210/xemacs-21.0-b36 What installation prefix should install use? /usr/local What operating system and machine description files should XEmacs use? `s/hpux9-shr.h' and `m/hp800.h' What compiler should XEmacs be built with? gcc -pipe -mpa-risc-1-1 -mschedule=7100 -mjump-in-delay -funroll-loops -O5 Should XEmacs use the GNU version of malloc? yes Should XEmacs use the relocating allocator for buffers? yes What window system should XEmacs use? x11 Where do we find X Windows header files? /usr/include/Motif1.2 /usr/local/X11R6/include Where do we find X Windows libraries? /usr/lib/Motif1.2 /usr/lib/X11R6 Additional header files: /usr/local/lib/gcc-lib/hppa1.1-hp-hpux9.05/2.8.1/include /usr/local/canna/include Compiling in support for XAUTH. Compiling in support for XPM images. Compiling in support for X-Face message headers. Compiling in support for JPEG image conversion. Compiling in support for PNG image conversion. Compiling in support for TIFF image conversion. Compiling in Mule (multi-lingual) support. Compiling in XIM (X11R5+ I18N input method) support. Using Motif to provide XIM support. Compiling in support for Canna on Mule. Compiling in support for OffiX. Compiling in support for proper session-management. Using Lucid menubars. Using Lucid scrollbars. Using Athena dialog boxes. Compiling in DLL support. movemail will use "dot-locking" for locking mail spool files. Compiling in extra code for debugging. Compiling in code for checking XEmacs memory usage. -- Nobu Toge (toge(a)accad1.kek.jp)

1 participants
0 comments

[Success] XEmacs 21.0-b37 Pygmy-Pre2 on LinuxPPC 26 years, 7 months

Nobu Toge

Successful build and run straight out of the box, including mule/canna support with/without X-window. Platform ======== LinuxPPC (kernel 2.1.42, 4/9/97 version) on PowerMac 7500/604/150. gcc 2.7.2.1-ppclinux based on gcc-2.7.2-2O and binutils-2.8.1.0.18-1E. Dump of Installation ==================== uname -a: Linux ptaro.kek.jp 2.1.24 #109 Wed Jan 21 10:31:25 EST 1998 ppc unknown ./configure '--cflags=-g -O2 -fsigned-char' '--dynamic=yes' '--error-checking=none' '--debug=no' '--with-dialogs=athena' '--with-site-lisp' '--prefix=/usr' '--with-xfs' '--with-canna' '--with-mule' '--package-path=/usr/lib/xemacspack' '--with-x' XEmacs 21.0-b37 "Pygmy-pre2" configured for `powerpc-unknown-linux'. Where should the build process find the source code? /home/toge/BUILD/xemacs-21. 0-b36 What installation prefix should install use? /usr What operating system and machine description files should XEmacs use? `s/linux.h' and `m/powerpc.h' What compiler should XEmacs be built with? gcc -g -O2 -fsigned-char Should XEmacs use the GNU version of malloc? yes Should XEmacs use the relocating allocator for buffers? yes What window system should XEmacs use? x11 Where do we find X Windows header files? /usr/X11/include Where do we find X Windows libraries? /usr/X11/lib Compiling in support for XAUTH. Compiling in support for XPM images. Compiling in support for X-Face message headers. Compiling in support for JPEG image conversion. Compiling in support for PNG image conversion. Compiling in support for TIFF image conversion. Compiling in native sound support. Compiling in support for Berkeley DB. Compiling in support for GNU DBM. Compiling in support for ncurses. Compiling in support for GPM (General Purpose Mouse). Compiling in Mule (multi-lingual) support. Compiling in XIM (X11R5+ I18N input method) support. Using raw Xlib to provide XIM support. Using XFontSet to provide bilingual menubar. Compiling in support for Canna on Mule. Compiling in support for OffiX. Compiling in support for proper session-management. Using Lucid menubars. Using Lucid scrollbars. Using Athena dialog boxes. Compiling in DLL support. movemail will use "dot-locking" for locking mail spool files. -- Nobu Toge (toge(a)accad1.kek.jp)

1 participants
0 comments

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

XEmacs-Beta April 1998