xemacs-cvs March 2006

xemacs-cvs@xemacs.org

1 participants
121 discussions

CVS update by stephent xemacs/lisp ... 19 years, 1 month

CVS Monitor

User: stephent Date: 06/03/31 21:19:27 Modified: xemacs/lisp ChangeLog Log: XEmacs 21.5.26 "endive" is released. Revision Changes Path 1.734 +4 -0 XEmacs/xemacs/lisp/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lisp/ChangeLog,v retrieving revision 1.733 retrieving revision 1.734 diff -u -p -r1.733 -r1.734 --- ChangeLog 2006/03/31 17:51:24 1.733 +++ ChangeLog 2006/03/31 19:19:25 1.734 ＠＠ -1,3 +1,7 ＠＠ +2006-03-31 Stephen J. Turnbull <stephen(a)xemacs.org> + + * XEmacs 21.5.26 "endive" is released. + 2006-03-31 Marcus Crestani <marcus.crestani(a)ub.uni-tuebingen.de> * diagnose.el (show-mc-alloc-memory-usage): Rename buffer to

1 participants
0 comments

CVS update by stephent xemacs/lib-src ... 19 years, 1 month

CVS Monitor

User: stephent Date: 06/03/31 21:19:11 Modified: xemacs/lib-src ChangeLog Log: XEmacs 21.5.26 "endive" is released. Revision Changes Path 1.206 +4 -0 XEmacs/xemacs/lib-src/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lib-src/ChangeLog,v retrieving revision 1.205 retrieving revision 1.206 diff -u -p -r1.205 -r1.206 --- ChangeLog 2006/03/31 17:51:23 1.205 +++ ChangeLog 2006/03/31 19:19:10 1.206 ＠＠ -1,3 +1,7 ＠＠ +2006-03-31 Stephen J. Turnbull <stephen(a)xemacs.org> + + * XEmacs 21.5.26 "endive" is released. + 2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org> * XEmacs 21.5.25 "eggplant" is released.

1 participants
0 comments

CVS update by stephent xemacs/etc ... 19 years, 1 month

CVS Monitor

User: stephent Date: 06/03/31 21:19:01 Modified: xemacs/etc ChangeLog Log: XEmacs 21.5.26 "endive" is released. Revision Changes Path 1.71 +4 -0 XEmacs/xemacs/etc/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/etc/ChangeLog,v retrieving revision 1.70 retrieving revision 1.71 diff -u -p -r1.70 -r1.71 --- ChangeLog 2006/02/26 13:44:03 1.70 +++ ChangeLog 2006/03/31 19:19:01 1.71 ＠＠ -1,3 +1,7 ＠＠ +2006-03-31 Stephen J. Turnbull <stephen(a)xemacs.org> + + * XEmacs 21.5.26 "endive" is released. + 2006-02-26 Stephen J. Turnbull <stephen(a)xemacs.org> * XEmacs 21.5.25 "eggplant" is released.

1 participants
0 comments

CVS update by stephent xemacs ... 19 years, 1 month

CVS Monitor

User: stephent Date: 06/03/31 21:18:52 Modified: xemacs ChangeLog Log: XEmacs 21.5.26 "endive" is released. Revision Changes Path 1.499 +4 -0 XEmacs/xemacs/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/ChangeLog,v retrieving revision 1.498 retrieving revision 1.499 diff -u -p -r1.498 -r1.499 --- ChangeLog 2006/03/31 17:51:19 1.498 +++ ChangeLog 2006/03/31 19:18:51 1.499 ＠＠ -1,5 +1,9 ＠＠ 2006-03-31 Stephen J. Turnbull <stephen(a)xemacs.org> + * XEmacs 21.5.26 "endive" is released. + +2006-03-31 Stephen J. Turnbull <stephen(a)xemacs.org> + Miscellaneous doc cleanup, parts 2-4: move CHANGES-msw, TODO.ben-mule-21-5, README.ben-mule-21-5, and README.ben-separate-stderr to Internals Manual.

1 participants
0 comments

CVS update by stephent xemacs ... 19 years, 1 month

CVS Monitor

User: stephent Date: 06/03/31 21:18:41 Modified: xemacs configure Log: XEmacs 21.5.26 "endive" is released. Revision Changes Path 1.279 +5 -5 XEmacs/xemacs/configure Index: configure =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/configure,v retrieving revision 1.278 retrieving revision 1.279 diff -u -p -r1.278 -r1.279 --- configure 2006/03/30 18:11:18 1.278 +++ configure 2006/03/31 19:18:33 1.279 ＠＠ -16444,7 +16444,7 ＠＠ ac_x_header_dirs=' /usr/openwin/share/include' if test "$ac_x_includes" = no; then - # Guess where to find include files, by looking for Xlib.h. + # Guess where to find include files, by looking for Intrinsic.h. # First, try using that file with no special directory specified. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ ＠＠ -16452,7 +16452,7 ＠＠ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include <X11/Xlib.h> +#include <X11/Intrinsic.h> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ＠＠ -16479,7 +16479,7 ＠＠ else sed 's/^/| /' conftest.$ac_ext >&5 for ac_dir in $ac_x_header_dirs; do - if test -r "$ac_dir/X11/Xlib.h"; then + if test -r "$ac_dir/X11/Intrinsic.h"; then ac_x_includes=$ac_dir break fi ＠＠ -16500,11 +16500,11 ＠＠ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include <X11/Xlib.h> +#include <X11/Intrinsic.h> int main () { -XrmInitialize () +XtMalloc (0) ; return 0; }

1 participants
0 comments

CVS update by stephent xemacs ... 19 years, 1 month

CVS Monitor

User: stephent Date: 06/03/31 21:18:20 Modified: xemacs version.sh Log: XEmacs 21.5.26 "endive" is released. Revision Changes Path 1.1485 +4 -4 XEmacs/xemacs/version.sh Index: version.sh =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/version.sh,v retrieving revision 1.1484 retrieving revision 1.1485 diff -u -p -r1.1484 -r1.1485 --- version.sh 2006/03/30 21:51:09 1.1484 +++ version.sh 2006/03/31 19:18:19 1.1485 ＠＠ -2,11 +2,11 ＠＠ emacs_is_beta=t emacs_major_version=21 emacs_minor_version=5 -emacs_beta_version=25 -xemacs_codename="eggplant" +emacs_beta_version=26 +xemacs_codename="endive" emacs_kit_version= infodock_major_version=4 infodock_minor_version=0 infodock_build_version=8 -xemacs_extra_name="(+CVS-20060330)" -xemacs_release_date="2006-02-26" +xemacs_extra_name="" +xemacs_release_date="2006-04-01"

1 participants
0 comments

CVS update by stephent xemacs/tests ... 19 years, 1 month

CVS Monitor

User: stephent Date: 06/03/31 19:51:40 Modified: xemacs/tests ChangeLog Removed: xemacs CHANGES-ben-mule CHANGES-msw README.ben-mule-21-5 README.ben-separate-stderr TODO.ben-mule-21-5 Log: Miscellaneous doc cleanup. <87u09eqzja.fsf(a)tleepslib.sk.tsukuba.ac.jp> Revision Changes Path 1.498 +36 -1 XEmacs/xemacs/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/ChangeLog,v retrieving revision 1.497 retrieving revision 1.498 diff -u -p -r1.497 -r1.498 --- ChangeLog 2006/03/30 18:11:17 1.497 +++ ChangeLog 2006/03/31 17:51:19 1.498 ＠＠ -1,3 +1,37 ＠＠ +2006-03-31 Stephen J. Turnbull <stephen(a)xemacs.org> + + Miscellaneous doc cleanup, parts 2-4: move CHANGES-msw, + TODO.ben-mule-21-5, README.ben-mule-21-5, and + README.ben-separate-stderr to Internals Manual. + + * CHANGES-msw: Removed. + * TODO.ben-mule-21-5: Removed. + * README.ben-mule-21-5: Removed. + * README.ben-separate-stderr: Removed. + +2006-03-29 Stephen J. Turnbull <stephen(a)xemacs.org> + + Miscellaneous doc cleanup, part 1: move CHANGES-ben-mule to + Internals Manual. + + * CHANGES-ben-mule: Removed. + + * ChangeLog: + * lib-src/ChangeLog: + * lisp/ChangeLog: + * lwlib/ChangeLog: + * man/ChangeLog: + * man/internals/internals.texi: + * modules/ChangeLog: + * netinstall/ChangeLog: + * nt/ChangeLog: + * nt/installer/Wise/ChangeLog: + * src/ChangeLog: + * tests/ChangeLog: + Update the Great Mule Merge placeholders to point to Internals + Manual node "The Great Mule Merge of March 2002". + N.B. Self-referencing log entries were *not* added to other logs. + 2006-03-30 Jerry James <james(a)xemacs.org> * configure.ac: Fix for -Kalloca detection, also broken by the ＠＠ -1564,7 +1598,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: See CHANGES-ben-mule. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.205 +2 -1 XEmacs/xemacs/lib-src/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lib-src/ChangeLog,v retrieving revision 1.204 retrieving revision 1.205 diff -u -p -r1.204 -r1.205 --- ChangeLog 2006/02/26 13:44:13 1.204 +++ ChangeLog 2006/03/31 17:51:23 1.205 ＠＠ -414,7 +414,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.733 +2 -1 XEmacs/xemacs/lisp/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lisp/ChangeLog,v retrieving revision 1.732 retrieving revision 1.733 diff -u -p -r1.732 -r1.733 --- ChangeLog 2006/03/31 08:39:09 1.732 +++ ChangeLog 2006/03/31 17:51:24 1.733 ＠＠ -5026,7 +5026,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.82 +2 -1 XEmacs/xemacs/lwlib/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lwlib/ChangeLog,v retrieving revision 1.81 retrieving revision 1.82 diff -u -p -r1.81 -r1.82 --- ChangeLog 2006/02/26 13:44:37 1.81 +++ ChangeLog 2006/03/31 17:51:26 1.82 ＠＠ -361,7 +361,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.335 +30 -1 XEmacs/xemacs/man/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/man/ChangeLog,v retrieving revision 1.334 retrieving revision 1.335 diff -u -p -r1.334 -r1.335 --- ChangeLog 2006/02/26 14:28:38 1.334 +++ ChangeLog 2006/03/31 17:51:27 1.335 ＠＠ -1,3 +1,31 ＠＠ +2006-03-31 Stephen J. Turnbull <stephen(a)xemacs.org> + + Miscellaneous doc cleanup, parts 2-4: move CHANGES-msw, + TODO.ben-mule-21-5, README.ben-mule-21-5, and + README.ben-separate-stderr to Internals Manual. + + * internals/internals.texi (Ben's TODO list): + (CHANGES from 21.4-windows branch): + (Ben's README): + (Ben's separate stderr notes): + New nodes. + + (Subprocesses): Add "Ben's separate stderr notes" to menu. + (The Great Mule Merge of March 2002): Add "Ben's TODO list" and + "Ben's README" to menu. + (Interface to MS Windows): Add "CHANGES from 21.4-windows branch" + to menu. + + (Top): Update detailmenu. + +2006-03-30 Stephen J. Turnbull <stephen(a)xemacs.org> + + Miscellaneous doc cleanup, part 1: move CHANGES-ben-mule to + Internals Manual. + + * internals/internals.texi (The Great Mule Merge of March 2002): + Insert CHANGES-ben-mule here, and reformat for Texinfo. + 2006-02-26 Mike Sperber <mike(a)xemacs.org> * xemacs/building.texi (External Lisp): Document that `run-lisp' ＠＠ -2855,7 +2883,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.74 +3447 -218 XEmacs/xemacs/man/internals/internals.texi Index: internals.texi =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/man/internals/internals.texi,v retrieving revision 1.73 retrieving revision 1.74 diff -u -p -r1.73 -r1.74 --- internals.texi 2005/12/18 12:22:03 1.73 +++ internals.texi 2006/03/31 17:51:29 1.74 ＠＠ -476,6 +476,7 ＠＠ Multilingual Support * CCL:: * Microsoft Windows-Related Multilingual Issues:: * Modules for Internationalization:: +* The Great Mule Merge of March 2002:: Encodings ＠＠ -522,6 +523,21 ＠＠ Microsoft Windows-Related Multilingual I * The format of the locale in setlocale():: * Random other Windows I18N docs:: +The Great Mule Merge of March 2002 + +* List of changed files in new Mule workspace:: +* Changes to the MULE subsystems:: +* Pervasive changes throughout XEmacs sources:: +* Changes to specific subsystems:: +* Mule changes by theme:: +* File-coding rewrite:: +* General User-Visible Changes:: +* General Lisp-Visible Changes:: +* User documentation:: +* General internal changes:: +* Ben's TODO list:: Probably obsolete. +* Ben's README:: Probably obsolete. + Consoles; Devices; Frames; Windows * Introduction to Consoles; Devices; Frames; Windows:: ＠＠ -577,12 +593,17 ＠＠ Lstreams * Lstream Functions:: Functions for working with lstreams. * Lstream Methods:: Creating new lstream types. +Subprocesses + +* Ben's separate stderr notes:: Probably obsolete. + Interface to MS Windows * Different kinds of Windows environments:: * Windows Build Flags:: * Windows I18N Introduction:: * Modules for Interfacing with MS Windows:: +* CHANGES from 21.4-windows branch:: Probably obsolete. Interface to the X Window System ＠＠ -10373,6 +10394,7 ＠＠ representation is that it's compact and * CCL:: * Microsoft Windows-Related Multilingual Issues:: * Modules for Internationalization:: +* The Great Mule Merge of March 2002:: ＠end menu ＠node Introduction to Multilingual Issues #1, Introduction to Multilingual Issues #2, Multilingual Support, Multilingual Support ＠＠ -14080,7 +14102,7 ＠＠ string of either regular or wide chars, prepended with an L (causing it to be a wide string) depending on XEUNICODE_P. -＠node Modules for Internationalization, , Microsoft Windows-Related Multilingual Issues, Multilingual Support +＠node Modules for Internationalization, The Great Mule Merge of March 2002, Microsoft Windows-Related Multilingual Issues, Multilingual Support ＠section Modules for Internationalization ＠cindex modules for internationalization ＠cindex internationalization, modules for ＠＠ -14161,286 +14183,3267 ＠＠ This contains leftover code from an earl Asian-language support, and is not currently used. -＠node Consoles; Devices; Frames; Windows, The Redisplay Mechanism, Multilingual Support, Top -＠chapter Consoles; Devices; Frames; Windows -＠cindex consoles; devices; frames; windows -＠cindex devices; frames; windows, consoles; -＠cindex frames; windows, consoles; devices; -＠cindex windows, consoles; devices; frames; +＠c +＠c DO NOT CHANGE THE NAME OF THIS NODE; ChangeLogs refer to it. +＠c Well, of course you're welcome to seek them out and fix them, too. +＠c + +＠node The Great Mule Merge of March 2002, , Modules for Internationalization, Multilingual Support +＠section The Great Mule Merge of March 2002 +＠cindex The Great Mule Merge +＠cindex Mule Merge, The Great + +In March 2002, just after the release of XEmacs 21.5 beta 5, Ben Wing +merged what was nominally a very large refactoring of the ``Mule'' +multilingual support code into the mainline. This merge added robust +support for Unicode on all platforms, and by providing support for Win32 +Unicode APIs made the Mule support on the Windows platform a reality. +This merge also included a large number of other changes and +improvements, not necessarily related to internationalization. + +This node basically amounts to the ChangeLog for 2002-03-12. + +Some effort has been put into proper markup for code and file names, and +some reorganization according to themes of revision. However, much +remains to be done. ＠menu -* Introduction to Consoles; Devices; Frames; Windows:: -* Point:: -* Window Hierarchy:: -* The Window Object:: -* Modules for the Basic Displayable Lisp Objects:: +* List of changed files in new Mule workspace:: +* Changes to the MULE subsystems:: +* Pervasive changes throughout XEmacs sources:: +* Changes to specific subsystems:: +* Mule changes by theme:: +* File-coding rewrite:: +* General User-Visible Changes:: +* General Lisp-Visible Changes:: +* User documentation:: +* General internal changes:: +* Ben's TODO list:: Probably obsolete. +* Ben's README:: Probably obsolete. ＠end menu -＠node Introduction to Consoles; Devices; Frames; Windows, Point, Consoles; Devices; Frames; Windows, Consoles; Devices; Frames; Windows -＠section Introduction to Consoles; Devices; Frames; Windows -＠cindex consoles; devices; frames; windows, introduction to -＠cindex devices; frames; windows, introduction to consoles; -＠cindex frames; windows, introduction to consoles; devices; -＠cindex windows, introduction to consoles; devices; frames; - -A window-system window that you see on the screen is called a -＠dfn{frame} in Emacs terminology. Each frame is subdivided into one or -more non-overlapping panes, called (confusingly) ＠dfn{windows}. Each -window displays the text of a buffer in it. (See above on Buffers.) Note -that buffers and windows are independent entities: Two or more windows -can be displaying the same buffer (potentially in different locations), -and a buffer can be displayed in no windows. - A single display screen that contains one or more frames is called -a ＠dfn{display}. Under most circumstances, there is only one display. -However, more than one display can exist, for example if you have -a ＠dfn{multi-headed} console, i.e. one with a single keyboard but -multiple displays. (Typically in such a situation, the various -displays act like one large display, in that the mouse is only -in one of them at a time, and moving the mouse off of one moves -it into another.) In some cases, the different displays will -have different characteristics, e.g. one color and one mono. +＠node List of changed files in new Mule workspace, Changes to the MULE subsystems, , The Great Mule Merge of March 2002 +＠subsection List of changed files in new Mule workspace - XEmacs can display frames on multiple displays. It can even deal -simultaneously with frames on multiple keyboards (called ＠dfn{consoles} in -XEmacs terminology). Here is one case where this might be useful: You -are using XEmacs on your workstation at work, and leave it running. -Then you go home and dial in on a TTY line, and you can use the -already-running XEmacs process to display another frame on your local -TTY. +This node lists the files that were touched in the Great Mule Merge. - Thus, there is a hierarchy console -> display -> frame -> window. -There is a separate Lisp object type for each of these four concepts. -Furthermore, there is logically a ＠dfn{selected console}, -＠dfn{selected display}, ＠dfn{selected frame}, and ＠dfn{selected window}. -Each of these objects is distinguished in various ways, such as being the -default object for various functions that act on objects of that type. -Note that every containing object remembers the ``selected'' object -among the objects that it contains: e.g. not only is there a selected -window, but every frame remembers the last window in it that was -selected, and changing the selected frame causes the remembered window -within it to become the selected window. Similar relationships apply -for consoles to devices and devices to frames. +＠heading Deleted files -＠node Point, Window Hierarchy, Introduction to Consoles; Devices; Frames; Windows, Consoles; Devices; Frames; Windows -＠section Point -＠cindex point +＠example +src/iso-wide.h +src/mule-charset.h +src/mule.c +src/ntheap.h +src/syscommctrl.h +lisp/files-nomule.el +lisp/help-nomule.el +lisp/mule/mule-help.el +lisp/mule/mule-init.el +lisp/mule/mule-misc.el +nt/config.h +＠end example + +＠heading Other deleted files + +These files were all zero-width and accidentally present. + +＠example +src/events-mod.h +tests/Dnd/README.OffiX +tests/Dnd/dragtest.el +netinstall/README.xemacs +lib-src/srcdir-symlink.stamp +＠end example + +＠heading New files + +＠example +CHANGES-ben-mule +README.ben-mule-21-5 +README.ben-separate-stderr +TODO.ben-mule-21-5 +etc/TUTORIAL.＠{cs,es,nl,sk,sl＠} +etc/unicode/* +lib-src/make-mswin-unicode.pl +lisp/code-init.el +lisp/resize-minibuffer.el +lisp/unicode.el +lisp/mule/china-util.el +lisp/mule/cyril-util.el +lisp/mule/devan-util.el +lisp/mule/devanagari.el +lisp/mule/ethio-util.el +lisp/mule/indian.el +lisp/mule/japan-util.el +lisp/mule/korea-util.el +lisp/mule/lao-util.el +lisp/mule/lao.el +lisp/mule/mule-locale.txt +lisp/mule/mule-msw-init.el +lisp/mule/thai-util.el +lisp/mule/thai.el +lisp/mule/tibet-util.el +lisp/mule/tibetan.el +lisp/mule/viet-util.el +src/charset.h +src/intl-auto-encap-win32.c +src/intl-auto-encap-win32.h +src/intl-encap-win32.c +src/intl-win32.c +src/intl-x.c +src/mule-coding.c +src/text.c +src/text.h +src/unicode.c +src/s/win32-common.h +src/s/win32-native.h +＠end example + +＠heading Changed files - Recall that every buffer has a current insertion position, called -＠dfn{point}. Now, two or more windows may be displaying the same buffer, -and the text cursor in the two windows (i.e. ＠code{point}) can be in -two different places. You may ask, how can that be, since each -buffer has only one value of ＠code{point}? The answer is that each window -also has a value of ＠code{point} that is squirreled away in it. There -is only one selected window, and the value of ``point'' in that buffer -corresponds to that window. When the selected window is changed -from one window to another displaying the same buffer, the old -value of ＠code{point} is stored into the old window's ``point'' and the -value of ＠code{point} from the new window is retrieved and made the -value of ＠code{point} in the buffer. This means that ＠code{window-point} -for the selected window is potentially inaccurate, and if you -want to retrieve the correct value of ＠code{point} for a window, -you must special-case on the selected window and retrieve the -buffer's point instead. This is related to why ＠code{save-window-excursion} -does not save the selected window's value of ＠code{point}. +``Too numerous to mention.'' (Ben didn't write that, I did, but it's a +good guess that's the intent....) -＠node Window Hierarchy, The Window Object, Point, Consoles; Devices; Frames; Windows -＠section Window Hierarchy -＠cindex window hierarchy -＠cindex hierarchy of windows - If a frame contains multiple windows (panes), they are always created -by splitting an existing window along the horizontal or vertical axis. -Terminology is a bit confusing here: to ＠dfn{split a window -horizontally} means to create two side-by-side windows, i.e. to make a -＠emph{vertical} cut in a window. Likewise, to ＠dfn{split a window -vertically} means to create two windows, one above the other, by making -a ＠emph{horizontal} cut. +＠node Changes to the MULE subsystems, Pervasive changes throughout XEmacs sources, List of changed files in new Mule workspace, The Great Mule Merge of March 2002 +＠subsection Changes to the MULE subsystems - If you split a window and then split again along the same axis, you -will end up with a number of panes all arranged along the same axis. -The precise way in which the splits were made should not be important, -and this is reflected internally. Internally, all windows are arranged -in a tree, consisting of two types of windows, ＠dfn{combination} windows -(which have children, and are covered completely by those children) and -＠dfn{leaf} windows, which have no children and are visible. Every -combination window has two or more children, all arranged along the same -axis. There are (logically) two subtypes of windows, depending on -whether their children are horizontally or vertically arrayed. There is -always one root window, which is either a leaf window (if the frame -contains only one window) or a combination window (if the frame contains -more than one window). In the latter case, the root window will have -two or more children, either horizontally or vertically arrayed, and -each of those children will be either a leaf window or another -combination window. +＠heading configure changes - Here are some rules: +＠itemize +＠item +file-coding always compiled in. eol detection is off by default on +unix, non-mule, but can be enabled with configure option +＠code{--with-default-eol-detection} or command-line flag ＠code{-eol}. -＠enumerate ＠item -Horizontal combination windows can never have children that are -horizontal combination windows; same for vertical. +code that selects which files are compiled is mostly moved to +(a)file{Makefile.in.in}. see comment in ＠file{Makefile.in.in}. ＠item -Only leaf windows can be split (obviously) and this splitting does one -of two things: (a) turns the leaf window into a combination window and -creates two new leaf children, or (b) turns the leaf window into one of -the two new leaves and creates the other leaf. Rule (1) dictates which -of these two outcomes happens. +vestigial i18n3 code deleted. ＠item -Every combination window must have at least two children. +new cygwin mswin libs imm32 (input methods), mpr (user name +enumeration). ＠item -Leaf windows can never become combination windows. They can be deleted, -however. If this results in a violation of (3), the parent combination -window also gets deleted. +check for ＠code{link}, ＠code{symlink}. ＠item -All functions that accept windows must be prepared to accept combination -windows, and do something sane (e.g. signal an error if so). -Combination windows ＠emph{do} escape to the Lisp level. +＠code{vfork}-related code deleted. ＠item -All windows have three fields governing their contents: -these are ＠dfn{hchild} (a list of horizontally-arrayed children), -＠dfn{vchild} (a list of vertically-arrayed children), and ＠dfn{buffer} -(the buffer contained in a leaf window). Exactly one of -these will be non-＠code{nil}. Remember that ＠dfn{horizontally-arrayed} -means ``side-by-side'' and ＠dfn{vertically-arrayed} means -＠dfn{one above the other}. +fix ＠file{configure.usage}. (delete ＠code{--with-file-coding}, +＠code{--no-doc-file}, add ＠code{--with-default-eol-detection}, +＠code{--quick-build}). ＠item -Leaf windows also have markers in their ＠code{start} (the -first buffer position displayed in the window) and ＠code{pointm} -(the window's stashed value of ＠code{point}---see above) fields, -while combination windows have ＠code{nil} in these fields. +(a)file{nt/config.h} has been eliminated and everything in it merged into +(a)file{config.h.in} and ＠file{s/windowsnt.h}. see ＠file{config.h.in} for +more info. ＠item -The list of children for a window is threaded through the -＠code{next} and ＠code{prev} fields of each child window. +massive rewrite of ＠file{s/windowsnt.h}, ＠file{m/windowsnt.h}, +(a)file{s/cygwin32.h}, ＠file{s/mingw32.h}. common code moved into +(a)file{s/win32-common.h}, ＠file{s/win32-native.h}. ＠item -＠strong{Deleted windows can be undeleted}. This happens as a result of -restoring a window configuration, and is unlike frames, displays, and -consoles, which, once deleted, can never be restored. Deleting a window -does nothing except set a special ＠code{dead} bit to 1 and clear out the -＠code{next}, ＠code{prev}, ＠code{hchild}, and ＠code{vchild} fields, for -GC purposes. +in ＠file{nt/xemacs.mak}, ＠file{nt/config.inc.samp}, variable is called +＠code{MULE}, not ＠code{HAVE_MULE}, for consistency with sources. ＠item -Most frames actually have two top-level windows---one for the -minibuffer and one (the ＠dfn{root}) for everything else. The modeline -(if present) separates these two. The ＠code{next} field of the root -points to the minibuffer, and the ＠code{prev} field of the minibuffer -points to the root. The other ＠code{next} and ＠code{prev} fields are -＠code{nil}, and the frame points to both of these windows. -Minibuffer-less frames have no minibuffer window, and the ＠code{next} -and ＠code{prev} of the root window are ＠code{nil}. Minibuffer-only -frames have no root window, and the ＠code{next} of the minibuffer window -is ＠code{nil} but the ＠code{prev} points to itself. (#### This is an -artifact that should be fixed.) -＠end enumerate +define ＠code{TABDLY}, ＠code{TAB3} in ＠file{freebsd.h} (#### from where?) +＠end itemize -＠node The Window Object, Modules for the Basic Displayable Lisp Objects, Window Hierarchy, Consoles; Devices; Frames; Windows -＠section The Window Object -＠cindex window object, the -＠cindex object, the window - Windows have the following accessible fields: +＠node Pervasive changes throughout XEmacs sources, Changes to specific subsystems, Changes to the MULE subsystems, The Great Mule Merge of March 2002 +＠subsection Pervasive changes throughout XEmacs sources -＠table ＠code -＠item frame -The frame that this window is on. +＠itemize +＠item +all ＠code{#ifdef FILE_CODING} statements removed from code. +＠end itemize -＠item mini_p -Non-＠code{nil} if this window is a minibuffer window. +＠heading Changes to string processing -＠item buffer -The buffer that the window is displaying. This may change often during -the life of the window. +＠itemize +＠item +new ＠samp{qxe()} string functions that accept ＠code{Intbyte *} as +arguments. These work exactly like the standard ＠code{strcmp()}, +＠code{strcpy()}, ＠code{sprintf()}, etc. except for the argument +declaration differences. We use these whenever we have ＠code{Intbyte *} +strings, which is quite often. -＠item dedicated -Non-＠code{nil} if this window is dedicated to its buffer. +＠item +new fun ＠code{build_intstring()} takes an ＠code{Intbyte *}. also new +funs ＠code{build_msg_intstring} (like ＠code{build_intstring()}) and +＠code{build_msg_string} (like ＠code{build_string()}) to do a +＠code{GETTEXT()} before building the string. (elimination of old +＠code{build_translated_string()}, replaced by +＠code{build_msg_string()}). -＠item pointm -＠cindex window point internals -This is the value of point in the current buffer when this window is -selected; when it is not selected, it retains its previous value. +＠item +function ＠code{intern_int()} for ＠code{Intbyte *} arguments, like +＠code{intern()}. -＠item start -The position in the buffer that is the first character to be displayed -in the window. +＠item +numerous places throughout code where ＠code{char *} replaced with +something else, e.g. ＠code{Char_ASCII *}, ＠code{Intbyte *}, +＠code{Char_Binary *}, etc. same with unsigned ＠code{char *}, going to +＠code{UChar_Binary *}, etc. +＠end itemize -＠item force_start -If this flag is non-＠code{nil}, it says that the window has been -scrolled explicitly by the Lisp program. This affects what the next -redisplay does if point is off the screen: instead of scrolling the -window to show the text around point, it moves point to a location that -is on the screen. -＠item last_modified -The ＠code{modified} field of the window's buffer, as of the last time -a redisplay completed in this window. +＠node Changes to specific subsystems, Mule changes by theme, Pervasive changes throughout XEmacs sources, The Great Mule Merge of March 2002 +＠subsection Changes to specific subsystems -＠item last_point -The buffer's value of point, as of the last time -a redisplay completed in this window. +＠heading Changes to the init code -＠item left -This is the left-hand edge of the window, measured in columns. (The -leftmost column on the screen is ＠w{column 0}.) +＠itemize +＠item +lots of init code rewritten to be mule-correct. +＠end itemize -＠item top -This is the top edge of the window, measured in lines. (The top line on -the screen is ＠w{line 0}.) +＠heading Changes to processes -＠item height -The height of the window, measured in lines. +＠itemize +＠item +always call ＠code{egetenv()}, never ＠code{getenv()}, for mule +correctness. +＠end itemize -＠item width -The width of the window, measured in columns. +＠heading command line (＠file{startup.el}, ＠file{emacs.c}) -＠item next -This is the window that is the next in the chain of siblings. It is -＠code{nil} in a window that is the rightmost or bottommost of a group of -siblings. +＠itemize +＠item +new option ＠code{-eol} to enable auto EOL detection under non-mule unix. -＠item prev -This is the window that is the previous in the chain of siblings. It is -＠code{nil} in a window that is the leftmost or topmost of a group of -siblings. +＠item +new option ＠code{-nuni} (＠code{--no-unicode-lib-calls}) to force use of +non-Unicode API's under Windows NT, mostly for debugging purposes. +＠end itemize -＠item parent -Internally, XEmacs arranges windows in a tree; each group of siblings has -a parent window whose area includes all the siblings. This field points -to a window's parent. -Parent windows do not display buffers, and play little role in display -except to shape their child windows. Emacs Lisp programs usually have -no access to the parent windows; they operate on the windows at the -leaves of the tree, which actually display buffers. +＠node Mule changes by theme, File-coding rewrite, Changes to specific subsystems, The Great Mule Merge of March 2002 +＠subsection Mule changes by theme -＠item hscroll -This is the number of columns that the display in the window is scrolled -horizontally to the left. Normally, this is 0. +＠itemize +＠item +the code that handles the details of processing multilingual text has +been consolidated to make it easier to extend it. it has been yanked +out of various files (＠file{buffer.h}, ＠file{mule-charset.h}, +(a)file{lisp.h}, ＠file{insdel.c}, ＠file{fns.c}, ＠file{file-coding.c}, +etc.) and put into ＠file{text.c} and ＠file{text.h}. +(a)file{mule-charset.h} has also been renamed ＠file{charset.h}. all long +comments concerning the representations and their processing have been +consolidated into ＠file{text.c}. + +＠item +major rewriting of file-coding. it's mostly abstracted into coding +systems that are defined by methods (similar to devices and specifiers), +with the ultimate aim being to allow non-i18n coding systems such as +gzip. there is a ``chain'' coding system that allows multiple coding +systems to be chained together. (it doesn't yet have the concept that +either end of a coding system can be bytes or chars; this needs to be +added.) + +＠item +large amounts of code throughout the code base have been Mule-ized, not +just Windows code. + +＠item +total rewriting of OS locale code. it notices your locale at startup +and sets the language environment accordingly, and calls +＠code{setlocale()} and sets ＠code{LANG} when you change the language +environment. new language environment properties ＠code{locale}, +＠code{mswindows-locale}, ＠code{cygwin-locale}, +＠code{native-coding-system}, to determine langenv from locale and +vice-versa; fix all language environments (lots of language files). +langenv startup code rewritten. many new functions to convert between +locales, language environments, etc. + +＠item +major overhaul of the way default values for the various coding system +variables are handled. all default values are collected into one +location, a new file ＠file{code-init.el}, which provides a unified +mechanism for setting and querying what i call ``basic coding system +variables'' (which may be aliases, parts of conses, etc.) and a +mechanism of different configurations (Windows w/Mule, Windows w/o Mule, +Unix w/Mule, Unix w/o Mule, unix w/o Mule but w/auto EOL), each of which +specifies a set of default values. we determine the configuration at +startup and set all the values in one place. (＠file{code-init.el}, +(a)file{code-files.el}, ＠file{coding.el}, ...) + +＠item +i copied the remaining language-specific files from fsf. i made some +minor changes in certain cases but for the most part the stuff was just +copied and may not work. -＠item use_time -This is the last time that the window was selected. The function -＠code{get-lru-window} uses this field. +＠item +ms windows mule support, with full unicode support. required font, +redisplay, event, other changes. ime support from ikeyama. +＠end itemize -＠item display_table -The window's display table, or ＠code{nil} if none is specified for it. +＠heading Lisp-Visible Changes: -＠item update_mode_line -Non-＠code{nil} means this window's mode line needs to be updated. +＠itemize +＠item +ensure that ＠code{escape-quoted} works correctly even without Mule +support and use it for all auto-saves. (＠file{auto-save.el}, +(a)file{fileio.c}, ＠file{coding.el}, ＠file{files.el}) -＠item base_line_number -The line number of a certain position in the buffer, or ＠code{nil}. -This is used for displaying the line number of point in the mode line. +＠item +new var ＠code{buffer-file-coding-system-when-loaded} specifies the +actual coding system used when the file was loaded +(＠code{buffer-file-coding-system} is usually the same, but may be +changed because it controls how the file is written out). use it in +revert-buffer (＠file{files.el}, ＠file{code-files.el}) and in new submenu +File->Revert Buffer with Specified Encoding (＠file{menubar-items.el}). -＠item base_line_pos -The position in the buffer for which the line number is known, or +＠item +improve docs on how the coding system is determined when a file is read +in; improved docs are in both ＠code{find-file} and +＠code{insert-file-contents} and a reference to where to find them is in +＠code{buffer-file-coding-system-for-read}. (＠file{files.el}, +(a)file{code-files.el}) + +＠item +new (brain-damaged) FSF way of calling post-read-conversion (only one +arg, not two) is supported, along with our two-argument way, as best we +can. (＠file{code-files.el}) + +＠item +add inexplicably missing var ＠code{default-process-coding-system}. use +it. get rid of former hacked-up way of setting these defaults using +＠code{comint-exec-hook}. also fun +＠code{set-buffer-process-coding-system}. (＠file{code-process.el}, +(a)file{code-cmds.el}, ＠file{process.c}) + +＠item +remove function ＠code{set-default-coding-systems}; replace with +＠code{set-default-output-coding-systems}, which affects only the output +defaults (＠code{buffer-file-coding-system}, output half of +＠code{default-process-coding-system}). the input defaults should not be +set by this because they should always remain ＠code{undecided} in normal +circumstances. fix ＠code{prefer-coding-system} to use the new function +and correct its docs. + +＠item +fix bug in ＠code{coding-system-change-eol-conversion} +((a)file{code-cmds.el}) + +＠item +recognize all eol types in ＠code{prefer-coding-system} +((a)file{code-cmds.el}) + +＠item +rewrite ＠code{coding-system-category} to be correct (＠file{coding.el}) +＠end itemize + +＠heading Internal Changes + +＠itemize +＠item +major improvements to eistring code, fleshing out of missing funs. +＠end itemize + +＠itemize +＠item +Separate encoding and decoding lstreams have been combined into a single +coding lstream. Functions＠samp{ make_encoding_*_stream} and +＠samp{make_decoding_*_stream} have been combined into +＠samp{make_coding_*_stream}, which takes an argument specifying whether +encode or decode is wanted. + +＠item +remove last vestiges of I18N3, I18N4 code. + +＠item +ascii optimization for strings: we keep track of the number of ascii +chars at the beginning and use this to optimize byte<->char conversion +on strings. + +＠item +(a)file{mule-misc.el}, ＠file{mule-init.el} deleted; code in there either +deleted, rewritten, or moved to another file. + +＠item +(a)file{mule.c} deleted. + +＠item +move non-Mule-specific code out of ＠file{mule-cmds.el} into +(a)file{code-cmds.el}. (＠code{coding-system-change-text-conversion}; +remove duplicate ＠code{coding-system-change-eol-conversion}) + +＠item +remove duplicate ＠code{set-buffer-process-coding-system} +((a)file{code-cmds.el}) + +＠item +add some commented-out code from FSF ＠file{mule-cmds.el} +(＠code{find-coding-systems-region-subset-p}, +＠code{find-coding-systems-region}, ＠code{find-coding-systems-string}, +＠code{find-coding-systems-for-charsets}, +＠code{find-multibyte-characters}, ＠code{last-coding-system-specified}, +＠code{select-safe-coding-system}, ＠code{select-message-coding-system}) +((a)file{code-cmds.el}) + +＠item +remove obsolete alias ＠code{pathname-coding-system}, function +＠code{set-pathname-coding-system} (＠file{coding.el}) + +＠item +remove coding-system property ＠code{doc-string}; split into +＠code{description} (short, for menu items) and ＠code{documentation} +(long); correct coding system defns (＠file{coding.el}, +(a)file{file-coding.c}, lots of language files) + +＠item +move coding-system-base into C and make use of internal info +((a)file{coding.el}, ＠file{file-coding.c}) + +＠item +move ＠code{undecided} defn into C (＠file{coding.el}, +(a)file{file-coding.c}) + +＠item +use ＠code{define-coding-system-alias}, not ＠code{copy-coding-system} +((a)file{coding.el}) + +＠item +new coding system ＠code{iso-8859-6} for arabic + +＠item +delete windows-1251 support from ＠file{cyrillic.el}; we do it +automatically + +＠item +remove ＠samp{setup-*-environment} as per FSF 21 + +＠item +rewrite ＠file{european.el} with lang envs for each language, so we can +specify the locale + +＠item +fix corruption in ＠file{greek.el} + +＠item +sync ＠file{japanese.el} with FSF 20.6 + +＠item +fix warnings in ＠file{mule-ccl.el} + +＠item +move FSF compat Mule fns from ＠file{obsolete.el} to +(a)file{mule-charset.el} + +＠item +eliminate unused ＠samp{truncate-string＠{-to-width＠}} + +＠item +＠code{make-coding-system} accepts (but ignores) the additional +properties present in the fsf version, for compatibility. + +＠item +i fixed the iso2022 handling so it will correctly read in files +containing unknown charsets, creating a ``temporary'' charset which can +later be overwritten by the real charset when it's defined. this allows +iso2022 elisp files with literals in strange languages to compile +correctly under mule. i also added a hack that will correctly read in +and write out the emacs-specific ``composition'' escape sequences, +i.e. ＠samp{ESC 0} through ＠samp{ESC 4}. this means that my workspace +correctly compiles the new file ＠file{devanagari.el} that i added. + +＠item +elimination of ＠code{string-to-char-list} (use ＠code{string-to-list}) + +＠item +elimination of junky ＠code{define-charset} +＠end itemize + +＠heading Selection + +＠itemize +＠item +fix msw selection code for Mule. proper encoding for +＠code{RegisterClipboardFormat}. store selection as +＠code{CF_UNICODETEXT}, which will get converted to the other formats. +don't respond to destroy messages from ＠code{EmptyClipboard()}. +＠end itemize + +＠heading Menubar + +＠itemize +＠item +new items ＠samp{Open With Specified Encoding}, +＠samp{Revert Buffer with Specified Encoding} + +＠item +split Mule menu into ＠samp{Encoding} (non-Mule-specific; includes new +item to control EOL auto-detection) and ＠samp{International} submenus on +＠samp{Options}, ＠samp{International} on ＠samp{Help} + +＠end itemize + +＠heading Unicode support: + +＠itemize +＠item +translation tables added in ＠file{etc/unicode} + +＠item +new files ＠file{unicode.c}, ＠file{unicode.el} containing unicode coding +systems and support; old code ripped out of ＠file{file-coding.c} + +＠item +translation tables read in at startup (NEEDS WORK TO MAKE IT MORE +EFFICIENT) + +＠item +support ＠code{CF_TEXT}, ＠code{CF_UNICODETEXT} in ＠file{select.el} + +＠item +encapsulation code added so that we can support both Windows 9x and NT +in a single executable, determining at runtime whether to call the +Unicode or non-Unicode API. encapsulated routines in +(a)file{intl-encap-win32.c} (non-auto-generated) and +(a)file{intl-auto-encap-win32.[ch]} (auto-generated). code generator in +(a)file{lib-src/make-mswin-unicode.pl}. changes throughout the code to +use the wide structures (W suffix) and call the encapsulated Win32 API +routines (＠samp{qxe} prefix). calling code needs to do proper +conversion of text using new coding systems ＠code{Qmswindows_tstr}, +＠code{Qmswindows_unicode}, or ＠code{Qmswindows_multibyte}. (the first +points to one of the other two.) +＠end itemize + + +＠node File-coding rewrite, General User-Visible Changes, Mule changes by theme, The Great Mule Merge of March 2002 +＠subsection File-coding rewrite + +The coding system code has been majorly rewritten. It's abstracted into +coding systems that are defined by methods (similar to devices and +specifiers). The types of conversions have also been generalized. +Formerly, decoding always converted bytes to characters and encoding the +reverse (these are now called ``text file converters''), but conversion +can now happen either to or from bytes or characters. This allows +coding systems such as ＠code{gzip} and ＠code{base64} to be written. +When specifying such a coding system to an operation that expects a text +file converter (such as reading in or writing out a file), the +appropriate coding systems to convert between bytes and characters are +automatically inserted into the conversion chain as necessary. To +facilitate creating such chains, a special coding system called +``chain'' has been created, which chains together two or more coding +systems. + +Encoding detection has also been abstracted. Detectors are logically +separate from coding systems, and each detector defines one or more +categories. (For example, the detector for Unicode defines categories +such as UTF-8, UTF-16, UCS-4, and UTF-7.) When a particular detector is +given a piece of text to detect, it determines likeliness values (seven +of them, from 3 [most likely] to -3 [least likely]; specific criteria +are defined for each possible value). All detectors are run in parallel +on a particular piece of text, and the results tabulated together to +determine the actual encoding of the text. + +Encoding and decoding are now completely parallel operations, and the +former ``encoding'' and ``decoding'' lstreams have been combined into a +single ``coding'' lstream. Coding system methods that were formerly +split in such a fashion have also been combined. + + +＠node General User-Visible Changes, General Lisp-Visible Changes, File-coding rewrite, The Great Mule Merge of March 2002 +＠subsection General User-Visible Changes + +＠heading Search + +＠itemize +＠item +make regex routines reentrant, since they're sometimes called +reentrantly. (see ＠file{regex.c} for a description of how.) all global +variables used by the regex routines get pushed onto a stack by the +callers before being set, and are restored when finished. redo the +preprocessor flags controlling ＠code{REL_ALLOC} in conjunction with +this. +＠end itemize + +＠heading Menubar + +＠itemize +＠item +move menu-splitting code (＠code{menu-split-long-menu}, etc.) from +(a)file{font-menu.el} to ＠file{menubar-items.el} and redo its algorithm; +use in various items with long generated menus; rename to remove +＠samp{font-} from beginning of functions but keep old names as aliases + +＠item +new fn ＠code{menu-sort-menu} + +＠item +redo items ＠samp{Grep All Files in Current Directory ＠{and Below＠}} +using stuff from sample ＠file{init.el} + +＠item +＠samp{Debug on Error} and friends now affect current session only; not +saved + +＠item +＠code{maybe-add-init-button} -> ＠code{init-menubar-at-startup} and call +explicitly from ＠file{startup.el} + +＠item +don't use ＠code{charset-registry} in ＠file{msw-font-menu.el}; it's only +for X +＠end itemize + +＠heading Changes to key bindings + +These changes are primarily found in ＠file{keymap.c}, ＠file{keydefs.el}, +and ＠file{help.el}, but are found in many other files. + +＠itemize +＠item +＠kbd{M-home}, ＠kbd{M-end} now move forward and backward in buffers; with +＠key{Shift}, stay within current group (e.g. all C files; same grouping +as the gutter tabs). (bindings +＠samp{switch-to-＠{next/previous＠}-buffer[-in-group]} in ＠file{files.el}) + +needed to move code from ＠file{gutter-items.el} to ＠file{buff-menu.el} +that's used by these bindings, since ＠file{gutter-items.el} is loaded +only when the gutter is active and these bindings (and hence the code) +is not (any more) gutter specific. + +＠item +new global vars global-tty-map and global-window-system-map specify key +bindings for use only on TTY's or window systems, respectively. this is +used to make ＠kbd{ESC ESC} be keyboard-quit on window systems, but +＠kbd{ESC ESC ESC} on TTY's, where ＠key{Meta + arrow} keys may appear as +＠kbd{ESC ESC O A} or whatever. ＠kbd{C-z} on window systems is now +＠code{zap-up-to-char}, and ＠code{iconify-frame} is moved to ＠kbd{C-Z}. +＠kbd{ESC ESC} is ＠code{isearch-quit}. (＠file{isearch-mode.el}) + +＠item +document ＠samp{global-＠{tty,window-system＠}-map} in various places; +display them when you do ＠kbd{C-h b}. + +＠item +fix up function documentation in general for keyboard primitives. +e.g. key-bindings now contains a detailed section on the steps prior to +looking up in keymaps, i.e. ＠code{function-key-map}, +＠code{keyboard-translate-table}. etc. ＠code{define-key} and other +obvious starting points indicate where to look for more info. + +＠item +eliminate use and mention of grody ＠code{advertised-undo} and +＠code{deprecated-help}. (＠file{simple.el}, ＠file{startup.el}, +(a)file{picture.el}, ＠file{menubar-items.el}) +＠end itemize + + +＠node General Lisp-Visible Changes, User documentation, General User-Visible Changes, The Great Mule Merge of March 2002 +＠subsection General Lisp-Visible Changes + +＠heading gzip support + +The gzip protocol is now partially supported as a coding system. + +＠itemize +＠item +new coding system ＠code{gzip} (bytes -> bytes); unfortunately, not quite +working yet because it handles only the raw zlib format and not the +higher-level gzip format (the zlib library is brain-damaged in that it +provides low-level, stream-oriented API's only for raw zlib, and for +gzip you have only high-level API's, which aren't useful for xemacs). + +＠item +configure support (＠code{--with-zlib}). +＠end itemize + + +＠node User documentation, General internal changes, General Lisp-Visible Changes, The Great Mule Merge of March 2002 +＠subsection User documentation + +＠heading Tutorial + +＠itemize +＠item +massive rewrite; sync to FSF 21.0.106, switch focus to window systems, +new sections on terminology and multiple frames, lots of fixes for +current xemacs idioms. + +＠item +german version from Adrian mostly matching my changes. + +＠item +copy new tutorials from FSF (Spanish, Dutch, Slovak, Slovenian, Czech); +not updated yet though. + +＠item +eliminate ＠file{help-nomule.el} and ＠file{mule-help.el}; merge into one +single tutorial function, fix lots of problems, put back in +(a)file{help.el} where it belongs. (there was some random junk in +(a)file{help-nomule.el}, ＠code{string-width} and ＠code{make-char}. +＠code{string-width} is now in ＠file{subr.el} with a single definition, +and ＠code{make-char} in ＠file{text.c}.) +＠end itemize + +＠heading Sample init file + +＠itemize +＠item +remove forward/backward buffer code, since it's now standard. + +＠item +when disabling ＠kbd{C-x C-c}, make it display a message saying how to +exit, not just beep and complain ``undefined''. +＠end itemize + + +＠node General internal changes, Ben's TODO list, User documentation, The Great Mule Merge of March 2002 +＠subsection General internal changes + +＠heading Changes to gnuclient and gnuserv + +＠itemize +＠item +clean up headers a bit. + +＠item +use proper ms win idiom for checking for temp directory (＠code{TEMP} or +＠code{TMP}, not ＠code{TMPDIR}). +＠end itemize + +＠heading Process changes + +＠itemize +＠item +Move ＠code{setenv} from packages; synch ＠code{setenv}/＠code{getenv} with +21.0.105 +＠end itemize + +＠heading Changes to I/O internals + +＠itemize +＠item +use ＠code{PATH_MAX} consistently instead of ＠code{MAXPATHLEN}, +＠code{MAX_PATH}, etc. + +＠item +all code that does preprocessor games with C lib I/O functions (open, +read) has been removed. The code has been changed to call the correct +function directly. Functions that accept ＠code{Intbyte *} arguments for +filenames and such and do automatic conversion to or from external +format will be prefixed ＠samp{qxe...()}. Functions that are retrying in +case of ＠code{EINTR} are prefixed ＠samp{retry_...()}. +＠code{DONT_ENCAPSULATE} is long-gone. + +＠item +never call ＠code{getcwd()} any more. use our shadowed value always. +＠end itemize + +＠heading Changes to string processing + +＠itemize +＠item +the ＠file{doprnt.c} external entry points have been completely rewritten +to be more useful and have more sensible names. We now have, for +example, versions that work exactly like ＠code{sprintf()} but return a +＠code{malloc()}ed string. + +＠item +code in ＠file{print.c} that handles ＠code{stdout}, ＠code{stderr} +rewritten. + +＠item +places that print to ＠code{stderr} directly replaced with +＠code{stderr_out()}. + +＠item +new convenience functions ＠code{write_fmt_string()}, +＠code{write_fmt_string_lisp()}, ＠code{stderr_out_lisp()}, +＠code{write_string()}. +＠end itemize + +＠heading Changes to Allocation, Objects, and the Lisp Interpreter + +＠itemize +＠item +automatically use ``managed lcrecord'' code when allocating. any +lcrecord can be put on a free list with ＠code{free_lcrecord()}. + +＠item +＠code{record_unwind_protect()} returns the old spec depth. + +＠item +＠code{unbind_to()} now takes only one arg. use ＠code{unbind_to_1()} if +you want the 2-arg version, with GC protection of second arg. + +＠item +new funs to easily inhibit GC. (＠code{＠{begin,end＠}_gc_forbidden()}) +use them in places where gc is currently being inhibited in a more ugly +fashion. also, we disable GC in certain strategic places where string +data is often passed in, e.g. ＠samp{dfc} functions, ＠samp{print} +functions. + +＠item +＠code{make_buffer()} -> ＠code{wrap_buffer()} for consistency with other +objects; same for ＠code{make_frame()} ->＠code{ wrap_frame()} and +＠code{make_console()} -> ＠code{wrap_console()}. + +＠item +better documentation in condition-case. + +＠item +new convenience funs ＠code{record_unwind_protect_freeing()} and +＠code{record_unwind_protect_freeing_dynarr()} for conveniently setting +up an unwind-protect to ＠code{xfree()} or ＠code{Dynarr_free()} a +pointer. +＠end itemize + +＠heading s/m files: + +＠itemize +＠item +removal of unused ＠code{DATA_END}, ＠code{TEXT_END}, +＠code{SYSTEM_PURESIZE_EXTRA}, ＠code{HAVE_ALLOCA} (automatically +determined) + +＠item +removal of ＠code{vfork} references (we no longer use ＠code{vfork}) +＠end itemize + +＠heading ＠file{make-docfile}: + +＠itemize +＠item +clean up headers a bit. + +＠item +allow ＠file{.obj} to mean equivalent ＠file{.c}, just like for ＠file{.o}. + +＠item +allow specification of a ``response file'' (a command-line argument +beginning with ＠＠, specifying a file containing further command-line +arguments) -- a standard mswin idiom to avoid potential command-line +limits and to simplify makefiles. use this in ＠file{xemacs.mak}. +＠end itemize + +＠heading debug support + +＠itemize +＠item +((a)file{cmdloop.el}) new var breakpoint-on-error, which breaks into the C +debugger when an unhandled error occurs noninteractively. useful when +debugging errors coming out of complicated make scripts, e.g. package +compilation, since you can set this through an env var. + +＠item +((a)file{startup.el}) new env var ＠code{XEMACSDEBUG}, specifying a Lisp +form executed early in the startup process; meant to be used for turning +on debug flags such as ＠code{breakpoint-on-error} or +＠code{stack-trace-on-error}, to track down noninteractive errors. + +＠item +((a)file{cmdloop.el}) removed non-working code in ＠code{command-error} to +display a backtrace on ＠code{debug-on-error}. use +＠code{stack-trace-on-error} instead to get this. + +＠item +((a)file{process.c}) new var ＠code{debug-process-io} displays data sent to +and received from a process. + +＠item +((a)file{alloc.c}) staticpros have name stored with them for easier +debugging. + +＠item +((a)file{emacs.c}) code that handles fatal errors consolidated and +rewritten. much more robust and correctly handles all fatal exits on +mswin (e.g. aborts, not previously handled right). +＠end itemize + +＠heading ＠file{startup.el} + +＠itemize +＠item +move init routines from ＠code{before-init-hook} or +＠code{after-init-hook}; just call them directly +(＠code{init-menubar-at-startup}, ＠code{init-mule-at-startup}). + +＠item +help message fixed up (divided into sections), existing problem causing +incomplete output fixed, undocumented options documented. +＠end itemize + +＠heading ＠file{frame.el} + +＠itemize +＠item +delete old commented-out code. +＠end itemize + + +＠node Ben's TODO list, Ben's README, General internal changes, The Great Mule Merge of March 2002 +＠subsection Ben's TODO list (probably obsolete) + +These notes substantially overlap those in ＠ref{Ben's README}. They +should probably be combined. + +＠heading April 11, 2002 + +Priority: + +＠enumerate +＠item +Finish checking in current mule ws. + +＠item +Start working on bugs reported by others and noticed by me: + + ＠itemize + ＠item + problems cutting and pasting binary data, e.g. from byte-compiler + instructions + + ＠item + test suite failures + + ＠item + process i/o problems w.r.t. eol: |uniq (e.g.) leaves ^M's at end of + line; running "bash" as shell-file-name doesn't work because it doesn't + like the extra ^M's. + ＠end itemize +＠end enumerate + +＠heading March 20, 2002 + +bugs: + +＠itemize +＠item +TTY-mode problem. When you start up in TTY mode, XEmacs goes through +the loadup process and appears to be working -- you see the startup +screen pulsing through the different screens, and it appears to be +listening (hitting a key stops the screen motion), but it's frozen -- +the screen won't get off the startup, key commands don't cause anything +to happen. STATUS: In progress. + +＠item +Memory ballooning in some cases. Not yet understood. + +＠item +other test suite failures? + +＠item +need to review the handling of sounds. seems that not everything is +documented, not everything is consistently used where it's supposed to, +some sounds are ugly, etc. add sounds to `completer' as well. + +＠item +redo with-trapping-errors so that the backtrace is stored away and only +outputted when an error actually occurs (i.e. in the condition-case +handler). test. (use ding of various sorts as a helpful way of checking +out what's going on.) + +＠item +problems with process input: |uniq (for example) leaves ^M's at end of +line. + +＠item +carefully review looking up of fonts by charset, esp. wrt the last +element of a font spec. + +＠item +add package support to ignore certain files -- *-util.el for languages. + +＠item +review use of escape-quoted in auto_save_1() vs. the buffer's own coding +system. + +＠item +figure out how to get the total amount of data memory (i.e. everything +but the code, or even including the code if can't distinguish) used by +the process on each different OS, and use it in a new algorithm for +triggering GC: trigger only when a certain % of the data size has been +consed up; in addition, have a minimum. + +＠item +fixed bugs??? + + ＠itemize + ＠item + Occasional crash when freeing display structures. The problem seems to + be this: A window has a "display line dynarr"; each display line has a + "display block dynarr". Sometimes this display block dynarr is getting + freed twice. It appears from looking at the code that sometimes a + display line from somewhere in the dynarr gets added to the end -- hence + two pointers to the same display block dynarr. need to review this + code. + ＠end itemize +＠end itemize + +＠heading August 29, 2001 + +This is the most current list of priorities in `ben-mule-21-5'. +Updated often. + +high-priority: + +＠table ＠strong + +＠item [input] + +＠itemize +＠item +support for WM_IME_CHAR. IME input can work under -nuni if we use +WM_IME_CHAR. probably we should always be using this, instead of +snarfing input using WM_COMPOSITION. i'll check this out. + +＠item +Russian C-x problem. see above. +＠end itemize + +＠item [clean-up] + +＠itemize +＠item +make sure it compiles and runs under non-mule. remember that some +code needs the unicode support, or at least a simple version of it. + +＠item +make sure it compiles and runs under pdump. see below. + +＠item +make sure it compiles and runs under cygwin. see below. + +＠item +clean up mswindows-multibyte, TSTR_TO_C_STRING. expand dfc +optimizations to work across chain. + +＠item +eliminate last vestiges of codepage<->charset conversion and similar +stuff. +＠end itemize + +＠item [other] + +＠itemize +＠item +test the "file-coding is binary only on Unix, no-Mule" stuff. + +＠item +test that things work correctly in -nuni if the system environment +is set to e.g. japanese -- i should get japanese menus, japanese +file names, etc. same for russian, hebrew ... + +＠item +cut and paste. see below. + +＠item +misc issues with handling lang environments. see also August 25, +"finally: working on the ＠kbd{C-x} in ...". + + ＠itemize + ＠item + when switching lang env, needs to set keyboard layout. + + ＠item + user var to control whether, when moving into text of a + particular language, we set the appropriate keyboard layout. we + would need to have a lisp api for retrieving and setting the + keyboard layout, set text properties to indicate the layout of + text, and have a way of dealing with text with no property on + it. (e.g. saved text has no text properties on it.) basically, + we need to get a keyboard layout from a charset; getting a + language would do. Perhaps we need a table that maps charsets + to language environments. + + ＠item + test that the lang env is properly set at startup. test that + switching the lang env properly sets the C locale (call + ＠code{setlocale()}, set ＠code{LANG}, etc.) -- a spawned subprogram + should have the new locale in its environment. + ＠end itemize + +＠item +look through everything below and see if anything is missed in this +priority list, and if so add it. create a separate file for the +priority list, so it can be updated as appropriate. +＠end itemize +＠end table + +mid-priority: + +＠itemize +＠item +clean up the chain coding system. its list should specify decode +order, not encode; i now think this way is more logical. it should +check the endpoints to make sure they make sense. it should also +allow for the specification of "reverse-direction coding systems": +use the specified coding system, but invert the sense of decode and +encode. + +＠item +along with that, places that take an arbitrary coding system and +expect the ends to be anything specific need to check this, and add +the appropriate conversions from byte->char or char->byte. + +＠item +get some support for arabic, thai, vietnamese, japanese jisx 0212: +at least get the unicode information in place and make sure we have +things tied together so that we can display them. worry about r2l +some other time. + +＠item +check the handling of ＠kbd{C-c}. can XEmacs itself be interrupted with +＠kbd{C-c}? is that impossible now that we are a window, not a console, +app? at least we should work something out with ＠file{i} so that if it +receives a ＠kbd{C-c} or ＠kbd{C-break}, it interrupts XEmacs, too. check +out how process groups work and if they apply only to console apps. +also redo the way that XEmacs sends ＠kbd{C-c} to other apps. the +business of injecting code should be last resort. we should try +＠kbd{C-c} first, and if that doesn't work, then the next time we try to +interrupt the same process, use the injection method. +＠end itemize + +＠node Ben's README, , Ben's TODO list, The Great Mule Merge of March 2002 +＠subsection Ben's README (probably obsolete) + +These notes substantially overlap those in ＠ref{Ben's TODO list}. They +should probably be combined. + +This may be of some historical interest as a record of Ben at work. +There may also be some useful suggestions as yet unimplemented. + +＠heading oct 27, 2001 + +-------- proposal for better buffer-switching commands: + +implement what VC++ currently has. you have a single "switch" command +like ＠kbd{CTRL-TAB}, which as long as you hold the ＠key{CTRL} button +down, brings successive buffers that are "next in line" into the current +position, bumping the rest forward. once you release the ＠key{CTRL} +key, the chain is broken, and further ＠kbd{CTRL-TAB}s will start from +the beginning again. this way, frequently used buffers naturally move +toward the front of the chain, and you can switch back and forth between +two buffers using ＠kbd{CTRL-TAB}. the only thing about ＠kbd{CTRL-TAB} +is it's a bit awkward. the way to implement is to have modifier-up +strokes fire off a hook, like modifier-up-hook. this is driven by event +dispatch, so there are no synchronization issues. when ＠kbd{C-tab} is +pressed, the binding function does something like set a one-shot handler +on the modifier-up-hook (perhaps separate hooks for separate +modifiers?). + +to do this, we'd also want to change the buffer tabs so that they maintain +their own order. in particular, they start out synched to the regular +order, but as you make changes, you don't want the tabs to change +order. (in fact, they may already do this.) selecting a particular buffer +from the buffer tabs DOES make the buffer go to the head of the line. the +invariant is that if the tabs are displaying X items, those X items are the +first X items in the standard buffer list, but may be in a different +order. (it looks like the tabs may already implement all of this.) + +＠heading oct 26, 2001 + +necessary testing/changes: + +＠itemize +＠item +test all eol detection stuff under windows w/ and w/o mule, unix w/ and +w/o mule. (test configure flag, command-line flag, menu option) may need +a way of pretending to be unix under cygwin. + +＠item +test under windows w/ and w/o mule, cygwin w/ and w/o mule, cygwin x +windows w/ and w/o mule. + +＠item +test undecided-dos/unix/mac. + +＠item +check ＠kbd{ESC ESC} works as ＠code{isearch-quit} under TTY's. + +＠item +test ＠code{coding-system-base} and all its uses (grep for them). + +＠item +menu item to revert to most recent auto save. + +＠item +consider renaming ＠code{build_string} -> ＠code{build_intstring} and +＠code{build_c_string} to ＠code{build_string}. (consistent with +＠code{build_msg_string} et al; many more ＠code{build_c_string} than +＠code{build_string}) +＠end itemize + +＠heading oct 20, 2001 + +fixed problem causing crash due to invalid internal-format data, fixed +an existing bug in ＠code{valid_char_p}, and added checks to more quickly +catch when invalid chars are generated. still need to investigate why +＠code{mswindows-multibyte} is being detected. + +i now see why -- we only process 65536 bytes due to a constant +＠code{MAX_BYTES_PROCESSED_FOR_DETECTION}. instead, we should have no +limit as long as we have a seekable stream. we also need to write +＠code{stderr_out_lisp()}, used in the debug info routines i wrote. + +check once more about ＠code{DEBUG_XEMACS}. i think debugging info +should be ON by default. make sure it is. check that nothing untoward +will result in a production system, e.g. presumably ＠code{assert()}s +should not really ＠code{abort()}. (!! Actually, this should be runtime +settable! Use a variable for this, and it can be set using the same +＠code{XEMACSDEBUG} method. In fact, now that I think of it, I'm sure +that debugging info should be on always, with runtime ways of turning on +or off any funny behavior.) + +＠heading oct 19, 2001 + +fixed various bugs preventing packages from being able to be built. +still another bug, with ＠file{psgml/etc/cdtd/docbook}, which contains +some strange characters starting around char pos 110,000. It gets +detected as ＠code{mswindows-multibyte} (wrong! why?) and then invalid +internal-format data is generated. need to fix +＠code{mswindows-multibyte} (and possibly add something that signals an +error as well; need to work on this error-signalling mechanism) and +figure out why it's getting detected as such. what i should do is add a +debug var that outputs blow-by-blow info of the detection process. + +＠heading oct 9, 2001 + +the stuff with ＠code{global-window-system-map} doesn't appear to work. in any +case it needs better documentation. [DONE] + +＠kbd{M-home}, ＠kbd{M-end} do work, but cause cl-macs to get loaded. why? + +＠heading oct 8, 2001 + +finished the coding system changes and they finally work! + +need to implement undecided-unix/dos/mac. they should be easy to do; it +should be enough to specify an eol-type but not do-eol, but check this. + +consider making the standard naming be foo-lf/crlf/cr, with unix/dos/mac as +aliases. + +print methods for coding systems should include some of the generic +properties. (also then fix print_..._within_print_method). [DONE] + +in a little while, go back and delete the +＠code{text-file-wrapper-coding-system} code. (it'll be in CVS if +necessary to get at it.) [DONE] + +need to verify at some point that non-text-file coding systems work +properly when specified. when gzip is working, this would be a good test +case. (and consider creating base64 as well!) + +remove extra crap from ＠code{coding-system-category} that checks for +chain coding systems. [DONE] + +perhaps make a primitive that gets at +＠code{coding-system-canonical}. [DONE] + +need to test cygwin, compiling the mule packages, get unix-eol stuff +working. frank from germany says he doesn't see a lisp backtrace when he +gets an error during temacs? verify that this actually gets outputted. + +consider putting the current language on the modeline, mousable so it can +be switched. also consider making the coding system be mousable and the +line number (pick a line) and the percentage (pick a percentage). + +＠heading oct 6, 2001 + +added code so that ＠code{debug_print()} will output a newline to the +mswindows debugging output, not just the console. need to test. [DONE] + +working on problem where all files are being detected as binary. the +problem may be that the undecided coding system is getting wrapped with +an auto-eol coding system, which it shouldn't be -- but even in this +situation, we should get the right results! check the +canonicalize-after-coding methods. also, +＠code{determine_real_coding_system} appears to be getting called even +when we're not detecting encoding. also, undecided needs a print method +to show its params, and chain needs to be updated to show +＠code{canonicalize_after_coding}. check others as well. [DONE] + +＠heading oct 5, 2001 + +finished up coding system changes, testing. + +errors byte-compiling files in ＠code{iso-2022-7-bit}. perhaps it's not +correctly detecting the encoding? + +noticed a problem in the dfc macros: we call +＠code{get_coding_system_for_text_file} with ＠code{eol_wrap == 1}, to +allow for auto-detection of the eol type; but this defeats the check and +short-circuit for unicode. + +still need to implement calling ＠code{determine_real_coding_system()} +for non-seekable streams. to implement correctly, we need to do our own +buffering. [DONE, BUT WITHOUT BUFFERING] + +＠heading oct 4, 2001 + +implemented most stuff below. + +need to finish up changes to ＠code{make_coding_system_1}. (i changed the +way internal coding systems were handled; i need to create subsidiaries +for all types of coding systems, not just text ones.) there's a nasty +＠code{xfree()} crash i was hitting; perhaps it'll go away once all stuff +has been rewritten. + +check under cygwin to make sure that when an error occurs during loadup, a +backtrace is output. + +as soon as andy releases his new setup, we should put it onto various +standard windows software repositories. + +＠heading oct 3, 2001 + +added ＠code{global-tty-map} and ＠code{global-window-system-map}. add +some stuff to the maps, e.g. ＠kbd{C-x ESC} for repeat vs. ＠kbd{C-x ESC +ESC} on TTY's, and of course ＠kbd{ESC ESC} on window systems +vs. ＠kbd{ESC ESC ESC} on TTY's. [TEST] + +was working on integrating the two ＠code{help-for-tutorial} versions (mule, +non-mule). [DONE, but test under non-Mule] + +was working on the file-coding changes. need to think more about +＠code{text-file-wrapper}. conclusion i think is that +＠code{get_coding_system_for_text_file} should wrap using a special +coding system type called a ＠code{text-file-wrapper}, which inherits +from chain, and implements ＠code{canonicalize-after-decoding} to just +return the unwrapped coding system. We need to implement inheritance of +coding systems, which will certainly come in extremely useful when +coding systems get implemented in Lisp, which should happen at some +point. (see existing docs about this.) essentially, we have a way of +declaring that we inherit from some system, and the appropriate data +structures get created, perhaps just an extra inheritance pointer. but +when we create the coding system, the extra data needs to be a stretchy +array of offsets, pointing to the type-specific data for the coding +system type and all its parents. that means that in the methods +structure for a coding system (which perhaps should be expanded beyond +method, it's just a "class structure") is the index in these arrays of +offsets. ＠code{CODING_SYSTEM_DATA()} can take any of the coding system +classes (rename type to class!) that make up this class. similarly, a +coding system class inherits its methods from the class above unless +specifying its own method, and can call the superclass method at any +point by either just invoking its name, or conceivably by some macro +like + +＠samp{CALL_SUPER (method, (args))} + +similar mods would have to be made to coding stream structures. + +perhaps for the immediate we can just sort of fake things like we currently +do with undecided calling some stuff from chain. + +＠heading oct 2, 2001 + +need to implement support for iso-8859-15, i.e. iso-8859-1 + euro symbol. +figure out how to fall back to iso-8859-1 as necessary. + +leave the current bindings the way they are for the moment, but bump off +＠kbd{M-home} and ＠kbd{M-end} (hardly used), and substitute my buffer +movement stuff there. [DONE, but test] + +there's something to be said for combining block of 6 and paragraph, +esp. if we make the definition of "paragraph" be so that it skips by 6 when +within code. hmm. + +eliminate ＠code{advertised-undo} crap, and similar hacks. [DONE] + +think about obsolete stuff to be eliminated. think about eliminating or +dimming obsolete items from ＠code{hyper-apropos} and something similar +in completion buffers. + +＠heading sep 30, 2001 + +synched up the tutorials with FSF 21.0.105. was rewriting them to favor +the cursor keys over the older ＠kbd{C-p}, etc. keys. + +Got thinking about key bindings again. + +＠enumerate +＠item +I think that ＠kbd{M-up/down} and ＠kbd{M-C-up/down} should be reversed. I use +scroll-up/down much more often than motion by paragraph. + +＠item +Should we eliminate move by block (of 6) and subsitute it for paragraph? +This would have the advantage that I could make bindings for buffer +change (forward/back buffer, perhaps ＠kbd{M-C-up/down}. with shift, +＠kbd{M-C-S-up/down} only goes within the same type (C files, etc.). +alternatively, just bump off ＠code{beginning-of-defun} from +＠kbd{C-M-home}, since it's on ＠kbd{C-M-a} already. +＠end enumerate + +need someone to go over the other tutorials (five new ones, from FSF +21.0.105) and fix them up to correspond to the english one. + +shouldn't shift-motion work with ＠kbd{C-a} and such as well as arrows? + +＠heading sep 29, 2001 + +＠code{charcount_to_bytecount} can also be made to scream -- as can +＠code{scan_buffer}, ＠code{buffer_mule_signal_inserted_region}, others? +we should start profiling though before going too far down this line. + +Debug code that causes no slowdown should in general remain in the +executable even in the release version because it may be useful +(e.g. for people to see the event output). so ＠code{DEBUG_XEMACS} +should be rethought. things like use of ＠file{msvcrtd.dll} should be +controlled by error_checking on. maybe ＠code{DEBUG_XEMACS} controls +general debug code (e.g. use of ＠file{msvcrtd.dll}, asserts abort, error +checking), and the actual debugging code should remain always, or be +conditonalized on something else (e.g. ＠samp{DEBUGGING_FUNS_PRESENT}). + +doc strings in dumped files are displayed with an extra blank line between +each line. presumably this is recent? i assume either the change to +detect-coding-region or the double-wrapping mentioned below. + +error with ＠code{coding-system-property} on ＠code{iso-2022-jp-dos}. +problem is that that coding system is wrapped, so its type shows up as +＠code{chain}, not ＠code{iso-2022}. this is a general problem, and i +think the way to fix it is to in essence do late canonicalization -- +similar in spirit to what was done long ago, +＠code{canonicalize_when_code}, except that the new coding system (the +wrapper) is created only once, either when the original cs is created or +when first needed. this way, operations on the coding system work like +expected, and you get the same results as currently when +decoding/encoding. the only thing tricky is handling +＠code{canonicalize-after-coding} and the ever-tricky double-wrapping +problem mentioned below. i think the proper solution is to move the +autodetection of eol into the main autodetect type. it can be asked to +autodetect eol, coding, or both. for just coding, it does like it +currently does. for just eol, it does similar to what it currently does +but runs the detection code that ＠code{convert-eol} currently does, and +selects the appropriate ＠code{convert-eol} system. when it does both +eol and coding, it does something on the order of creating two more +autodetect coding systems, one for eol only and one for coding only, and +chains them together. when each has detected the appropriate value, the +results are combined. this automatically eliminates the double-wrapping +problem, removes the need for complicated +＠code{canonicalize-after-coding} stuff in chain, and fixes the problem +of autodetect not having a seekable stream because hidden inside of a +chain. (we presume that in the both-eol-and-coding case, the various +autodetect coding streams can communicate with each other +appropriately.) + +also, we should solve the problem of internal coding systems floating +around and clogging up the list simply by having an "internal" property +on cs's and an internal param to ＠code{coding-system-list} (optional; if +not given, you don't get the internal ones). [DONE] + +we should try to reduce the size of the from-unicode tables (the dominant +memory hog in the tables). one obvious thing is to not store a whole +emchar as the mapped-to value, but a short that encodes the octets. [DONE] + +＠heading sep 28, 2001 + +need to merge up to latest in trunk. + +add unicode charsets for all non-translatable unicode chars; probably +want to extend the concept of charsets to allow for dimension 3 and +dimension 4 charsets. for the moment we should stick with just +dimension 3 charsets; otherwise we run past the current maximum of 4 +bytes per emchar. (most code would work automatically since it +uses＠code{ MAX_EMCHAR_LEN}; the trickiness is in certain code that has +intimate knowledge of the representation. +e.g. ＠code{bufpos_to_bytind()} has to multiply or divide by 1, 2, 3, or +4, and has special ways of handling each number. with 5 or 6 bytes per +char, we'd have to change that code in various ways.) 96x96x96 = 884,000 +or so, so with two 96x96x96 charsets, we could tackle all Unicode values +representable by UTF-16 and then some -- and only these codepoints will +ever have assigned chars, as far as we know. + +need an easy way of showing the current language environment. some menus +need to have the current one checked or whatever. [DONE] + +implement unicode surrogates. + +implement ＠code{buffer-file-coding-system-when-loaded} -- make sure +＠code{find-file}, ＠code{revert-file}, etc. set the coding system [DONE] + +verify all the menu stuff [DONE] + +implemented the entirely-ascii check in buffers. not sure how much gain +it'll get us as we already have a known range inside of which is +constant time, and with pure-ascii files the known range spans the whole +buffer. improved the comment about how ＠code{bufpos-to-bytind} and +vice-versa work. [DONE] + +fix double-wrapping of ＠code{convert-eol}: when undecided converts +itself to something with a non-autodetect eol, it needs to tell the +adjacent ＠code{convert-eol} to reduce itself to nothing. + +need menu item for find file with specified encoding. [DONE] + +renamed coding systems mswindows-### to windows-### to follow the standard +in rfc1345. [DONE] + +implemented ＠code{coding-system-subsidiary-parent} [DONE] +＠code{HAVE_MULE} -> ＠code{MULE} in files in ＠file{nt/} so that depend +checking works [DONE] + +need to take the smarter ＠code{search-all-files-in-dir} stuff from my +sample init file and put it on the grep menu [DONE] + +added item for revert w/specified encoding; mostly works, but needs +fixes. in particular, you get the correct results, but +＠code{buffer-file-coding-system} does not reflect things right. also, +there are too many entries. need to split into submenus. there is +already split code out there; see if it's generalized and if not make it +so. it should only split when there's more than a specified number, and +when splitting, split into groups of a specified size, not into a +specified number of groups. [DONE] + +too many entries in the langenv menus; need to split. [DONE] + +＠heading sep 27, 2001 + +NOTE: ＠kbd{M-x grep} for make-string causes crash now. something +definitely to do with string changes. check very carefully the diffs +and put in those sledgehammer checks. [DONE] + +fix font-lock bug i introduced. [DONE] + +added optimization to strings (keeps track of # of bytes of ascii at the +beginning of a string). perhaps should also keep an all-ascii flag to deal +with really large (> 2 MB) strings. rewrite code to count ascii-begin to +use the 4-or-8-at-a-time stuff in ＠code{bytecount_to_charcount}. + +Error: ＠kbd{M-q} is causing Invalid Regexp error on the above paragraph. +It's not in working. I assume it's a side effect of the string stuff. +VERIFY! Write sledgehammer checks for strings. [DONE] + +revamped the locale/init stuff so that it tries much harder to get things +right. should test a bit more. in particular, test out Describe Language +on the various created environments and make sure everything looks right. + +should change the menus: move the submenus on ＠samp{Edit->Mule} directly +under ＠samp{Edit}. add a menu entry on ＠samp{File} to say "Reload with +specified encoding ->". [DONE] + +Also ＠samp{Find File} with specified encoding -> Also entry to change +the EOL settings for Unix, and implement it. + +＠code{decode-coding-region} isn't working because it needs to insert a +binary (char->byte) converter. [DONE] + +chain should be rearranged to be in decoding order; similar for +source/sink-type, other things? + +the detector should check for a magic cookie even without a seekable input. +(currently its input is not seekable, because it's hidden within a chain. +#### See what we can do about this.) + +provide a way to display various settings, e.g. the current category +mappings and priority (see mule-diag; get this working so it's in the +path); also a way to print out the likeliness results from a detection, +perhaps a debug flag. + +problem with `env', which causes path issues due to `env' in packages. +move env code to process, sync with fsf 21.0.105, check that the autoloads +in `env' don't cause problems. [DONE] + +8-bit iso2022 detection appears broken; or at least, mule-canna.c is not so +detected. + +＠heading sep 25, 2001 + +something else to do is review the font selection and fix it so that (e.g.) +JISX-0212 can be displayed. + +also, text in widgets needs to be drawn by us so that the correct fonts +will be displayed even in multi-lingual text. + +＠heading sep 24, 2001 + +the detection system is now properly abstracted. the detectors have been +rewritten to include multiple levels of abstraction. now we just need +detectors for ascii, binary, and latin-x, as well as more sophisticated +detectors in general and further review of the general algorithm for doing +detection. (#### Is this written up anywhere?) after that, consider adding +error-checking to decoding (VERY IMPORTANT) and verifying the binary +correctness of things under unix no-mule. + +＠heading sep 23, 2001 + +began to fix the detection system -- adding multiple levels of likelihood +and properly abstracting the detectors. the system is in place except for +the abstraction of the detector-specific data out of the struct +detection_state. we should get things working first before tackling that +(which should not be too hard). i'm rewriting algorithms here rather than +just converting code, so it's harder. mostly done with everything, but i +need to review all detectors except iso2022 and make them properly follow +the new way. also write a no-conversion detector. also need to look into +the `recode' package and see how (if?) they handle detection, and maybe +copy some of the algorithms. also look at recent FSF 21.0 and see if their +algorithms have improved. + +＠heading sep 22, 2001 + +＠itemize +＠item +fixed gc bugs from yesterday. + +＠item +fixed truename bug. + +＠item +close/finalize stuff works. + +＠item +eliminated notyet stuff in syswindows.h. + +＠item +eliminated special code in tstr_to_c_string. + +＠item +fixed pdump problems. (many of them, mostly latent bugs, ugh) + +＠item +fixed cygwin ＠code{sscanf} problems in +＠code{parse-unicode-translation-table}. (NOT a ＠code{sscanf} bug, but +subtly different behavior w.r.t. whitespace in the format string, +combined with a debugger that sucks ROCKS!! and consistently outputs +garbage for variable values.) +＠end itemize + +main stuff to test is the handling of EOF recognition vs. binary +(i.e. check what the default settings are under Unix). then we may have +something that WORKS on all platforms!!! (Also need to test Windows +non-Mule) + +＠heading sep 21, 2001 + +finished redoing the close/finalize stuff in the lstream code. but i +encountered again the nasty bug mentioned on sep 15 that disappeared on +its own then. the problem seems to be that the finalize method of some +of the lstreams is calling ＠code{Lstream_delete()}, which calls +＠code{free_managed_lcrecord()}, which is a no-no when we're inside of +garbage-collection and the object passed to +＠code{free_managed_lcrecord()} is unmarked, and about to be released by +the gc mechanism -- the free lists will end up with ＠code{xfree()}d +objects on them, which is very bad. we need to modify +＠code{free_managed_lcrecord()} to check if we're in gc and the object is +unmarked, and ignore it rather than move it to the free list. [DONE] + +(#### What we really need to do is do what Java and C# do w.r.t. their +finalize methods: For objects with finalizers, when they're about to be +freed, leave them marked, run the finalizer, and set another bit on them +indicating that the finalizer has run. Next GC cycle, the objects will +again come up for freeing, and this time the sweeper notices that the +finalize method has already been called, and frees them for good (provided +that a finalize method didn't do something to make the object alive +again).) + +＠heading sep 20, 2001 + +redid the lstream code so there is only one coding stream. combined the +various doubled coding stream methods into one; i'm a little bit unsure +of this last part, though, as the results of combining the two together +seem unclean. got it to compile, but it crashes in loadup. need to go +through and rehash the close vs. finalize stuff, as the problem was +stuff getting freed too quickly, before the canonicalize-after-decoding +was run. should eliminate entirely ＠code{CODING_STATE_END} and use a +different method (close coding stream). rewrite to use these two. make +sure they're called in the right places. ＠code{Lstream_close} on a +stream should *NOT* do finalizing. finalize only on delete. [DONE] + +in general i'd like to see the flags eliminated and converted to +bit-fields. also, rewriting the methods to take advantage of rejecting +should make it possible to eliminate much of the state in the various +methods, esp. including the flags. need to test this is working, though -- +reduce the buffer size down very low and try files with only CRLF's in +them, with one offset by a byte from the other, and see if we correctly +handle rejection. + +still have the problem with incorrectly truenaming files. + + +＠heading sep 19, 2001 + +bug reported: crash while closing lstreams. + +the lstream/coding system close code needs revamping. we need to document +that order of closing lstreams is very important, and make sure we're +consistent. furthermore, chain and undecided lstreams need to close their +underneath lstreams when they receive the EOF signal (there may be data in +the underneath streams waiting to come out), not when they themselves are +closed. [DONE] + +(if only we had proper inheritance. i think in any case we should +simulate it for the chain coding stream -- write things in such a way that +undecided can use the chain coding stream and not have to duplicate +anything itself.) + +in general we need to carefully think through the closing process to make +sure everything always works correctly and in the right order. also check +very carefully to make sure there are no dangling pointers to deleted +objects floating around. + +move the docs for the lstream functions to the functions themselves, not +the header files. document more carefully what exactly +＠code{Lstream_delete()} means and how it's used, what the connections +are between ＠code{Lstream_close(}), ＠code{Lstream_delete()}, +＠code{Lstream_flush()}, ＠code{lstream_finalize}, etc. [DONE] + +additional error-checking: consider deadbeefing the memory in objects +stored in lcrecord free lists; furthermore, consider whether lifo or +fifo is correct; under error-checking, we should perhaps be doing fifo, +and setting a minimum number of objects on the lists that's quite large +so that it's highly likely that any erroneous accesses to freed objects +will go into such deadbeefed memory and cause crashes. also, at the +earliest available opportunity, go through all freed memory and check +for any consistency failures (overwrites of the deadbeef), crashing if +so. perhaps we could have some sort of id for each block, to easier +trace where the offending block came from. (all of these ideas are +present in the debug system malloc from VC++, plus more stuff.) there's +similar code i wrote sitting somewhere (in ＠file{free-hook.c}? doesn't +appear so. we need to delete the blocking stuff out of there!). also +look into using the debug system malloc from VC++, which has lots of +cool stuff in it. we even have the sources. that means compiling under +pdump, which would be a good idea anyway. set it as the default. (but +then, we need to remove the requirement that Xpm be a DLL, which is +extremely annoying. look into this.) + +test the windows code page coding systems recently created. + +problems reading my mail files -- 1personal appears to hang, others come up +with lots of ^M's. investigate. + +test the enum functions i just wrote, and finish them. + +still pdump problems. + +＠heading sep 18, 2001 + +critical-quit broken sometime after aug 25. + +＠itemize +＠item +fixed critical quit. + +＠item +fixed process problems. + +＠item +print routines work. (no routine for ccl, though) + +＠item +can read and write unicode files, and they can still be read by some +other program + +＠item +defaults should come up correctly -- mswindows-multibyte is general. +＠end itemize + +still need to test matej's stuff. +seems ok with multibyte stuff but needs more testing. + +＠heading sep 17, 2001 + +!!!!! something broken with processes !!!!! cannot send mail anymore. must +investigate. + +＠heading sep 17, 2001 + +on mon/wed nights, stop *BEFORE* 11pm. Otherwise i just start getting +woozy and can't concentrate. + +just finished getting assorted fixups to the main branch committed, so it +will compile under C++ (Andy committed some code that broke C++ builds). +cup'd the code into the fixtypes workspace, updated the tags appropriately. +i've created the appropriate log message, sitting in fixtypes.txt in +/src/xemacs; perhaps it should go into a README. now i just have to build +on everything (it's currently building), verify it's ok, run patcher-mail, +commit, send. + +my mule ws is also very close. need to: + +＠itemize +＠item +test the new print routines. + +＠item +test it can read and write unicode files, and they can still be read by +some other program. + +＠item +try to see if unicode can be auto-detected properly. + +＠item +test it can read and write multibyte files in a few different formats. +currently can't recognize them, but if you set the cs right, it should +work. + +＠item +examine the test files sent by matej and see if we can handle them. +＠end itemize + +＠heading sep 15, 2001 + +more eol fixing. this stuff is utter crap. + +currently we wrap coding systems with ＠code{convert-eol-autodetect} when we create +them in ＠code{make_coding_system_1}. i had a feeling that this would be a +problem, and indeed it is -- when autodetecting with `undecided', for +example, we end up with multiple layers of eol conversion. to avoid this, +we need to do the eol wrapping *ONLY* when we actually retrieve a coding +system in places such as ＠code{insert-file-contents}. these places are +＠code{insert-file-contents}, load, process input, ＠code{call-process-internal}, +＠samp{encode/decode/detect-coding-region}, database input, ... + +(later) it's fixed, and things basically work. NOTE: for some reason, +adding code to wrap coding systems with ＠code{convert-eol-lf} when +＠code{eol-type == lf} results in crashing during garbage collection in +some pretty obscure place -- an lstream is free when it shouldn't be. +this is a bad sign. i guess something might be getting initialized too +early? + +we still need to fix the canonicalization-after-decoding code to avoid +problems with coding systems like `internal-7' showing up. basically, +when ＠code{eol==lf} is detected, nil should be returned, and the callers +should handle it appropriately, eliding when necessary. chain needs to +recognize when it's got only one (or even 0) items in the chain, and +elide out the chain. + +＠heading sep 11, 2001: the day that will live in infamy + +rewrite of sep 9 entry about formats: + +when calling ＠samp{make-coding-system}, the name can be a cons of ＠samp{(format1 . +format2)}, specifying that it decodes ＠samp{format1->format2} and encodes the other +way. if only one name is given, that is assumed to be ＠samp{format1}, and the +other is either `external' or `internal' depending on the end type. +normally the user when decoding gives the decoding order in formats, but +can leave off the last one, `internal', which is assumed. a multichain +might look like gzip|multibyte|unicode, using the coding systems named +`gzip', `(unicode . multibyte)' and `unicode'. the way this actually works +is by searching for gzip->multibyte; if not found, look for gzip->external +or gzip->internal. (In general we automatically do conversion between +internal and external as necessary: thus gzip|crlf does the expected, and +maps to gzip->external, external->internal, crlf->internal, which when +fully specified would be gzip|external:external|internal:crlf|internal -- +see below.) To forcibly fit together two converters that have explicitly +specified and incompatible names (say you have unicode->multibyte and +iso8859-1->ebcdic and you know that the multibyte and iso8859-1 in this +case are compatible), you can force-cast using :, like this: +ebcdic|iso8859-1:multibyte|unicode. (again, if you force-cast between +internal and external formats, the conversion happens automatically.) + + +＠heading sep 10, 2001 + +moved the autodetection stuff (both codesys and eol) into particular coding +systems -- `undecided' and `convert-eol' (type == `autodetect'). needs +lots of work. still need to search through the rest of the code and find +any remaining auto-detect code and move it into the undecided coding +system. need to modify make-coding-system so that it spits out +auto-detecting versions of all text-file coding systems unless we say not +to. need eliminate entirely the EOF flag from both the stream info and the +coding system; have only the original-eof flag. in +coding_system_from_mask, need to check that the returned value is not of +type `undecided', falling back to no-conversion if so. also need to make +sure we wrap everything appropriate for text-files -- i removed the +wrapping on set-coding-category-list or whatever (need to check all those +files to make sure all wrapping is removed). need to review carefully the +new code in `undecided' to make sure it works are preserves the same logic +as previously. need to review the closing and rewinding behavior of chain +and undecided (same -- should really consolidate into helper routines, so +that any coding system can embed a chain in it) -- make sure the dynarr's +are getting their data flushed out as necessary, rewound/closed in the +right order, no missing steps, etc. + +also split out mule stuff into ＠file{mule-coding.c}. work done on +＠file{configure}/＠file{xemacs.mak}/(a)file{Makefile}s not done yet. work +on ＠file{emacs.c}/(a)file{symsinit.h} to interface with the new init +functions not done yet. + +also put in a few declarations of the way i think the abstracted detection +stuff ought to go. DON'T WORK ON THIS MORE UNTIL THE REST IS DEALT WITH +AND WE HAVE A WORKING XEMACS AGAIN WITH ALL EOL ISSUES NAILED. + +really need a version of ＠file{cvs-mods} that reports only the current +directory. WRITE THIS! use it to implement a better +＠file{cvs-checkin}. + +＠heading sep 9, 2001 + +implemented a gzip coding system. unfortunately, doesn't quite work right +because it doesn't handle the gzip headers -- it just reads and writes raw +zlib data. there's no function in the library to skip past the header, but +we do have some code out of the library that we can snarf that implements +header parsing. we need to snarf that, store it, and output it again at +the beginning when encoding. in the process, we should create a "get next +byte" macro that bails out when there are no more. using this, we set up a +nice way of doing most stuff statelessly -- if we have to bail, we reject +everything back to the sync point. also need to fix up the autodetection +of zlib in configure.in. + +BIG problems with eol. finished up everything i thought i would need to +get eol stuff working, but no -- when you have mswindows-unicode, with its +eol set to autodetect, the detection routines themselves do the autodetect +(first), and fail (they report CR on CRLF because of the NULL byte between +the CR and the LF) since they're not looking at ascii data. with a chain +it's similarly bad. for mswindows-multibyte, for example, which is a chain +unicode->unicode-to-multibyte, autodetection happens inside of the chain, +both when unicode and unicode-to-multibyte are active. we could twiddle +around with the eol flags to try to deal with this, but it's gonna be a +big mess, which is exactly what we're trying to avoid. what we +basically want is to entirely rip out all EOL settings from either the +coding system or the stream (yes, there are two! one might saw +autodetect, and then the stream contains the actual detected value). +instead, we simply create an eol-autodetect coding system -- or rather, +it's part of the convert-eol coding system. convert-eol, type = +autodetect, does autodetection the first time it gets data sent to it to +decode, and thereafter sets a stream parameter indicating the actual eol +type for this stream. this means that all autodetect coding systems, as +created by ＠code{make-coding-system}, really are chains with a +convert-eol at the beginning. only subsidiary xxx-unix has no wrapping +at all. this should allow eof detection of gzip, unicode, etc. for +that matter, general autodetection should be entirely encapsulated +inside of the `autodetect' coding system, with no eol-autodetection -- +the chain becomes convert-eol (autodetect) -> autodetect or perhaps +backwards. the generic autodetect similarly has a coding-system in its +stream methods, and needs somehow or other to insert the detected +coding-system into the chain. either it contains a chain inside of it +(perhaps it *IS* a chain), or there's some magic involving +canonicalization-type switcherooing in the middle of a decode. either +way, once everything is good and done and we want to save the coding +system so it can be used later, we need to do another sort of +canonicalization -- converting auto-detect-type coding systems into the +detected systems. again, a coding-system method, with some magic +currently so that subsidiaries get properly used rather than something +that's new but equivalent to subsidiaries. (#### perhaps we could use a +hash table to avoid recreating coding systems when not necessary. but +that would require that coding systems be immutable from external, and +i'm not sure that's the case.) + +i really think, after all, that i should reverse the naming of everything +in chain and source-sink-type -- they should be decoding-centric. later +on, if/when we come up with the proper way to make it totally symmetrical, +we'll be fine whether before then we were encoding or decoding centric. + + +＠heading sep 9, 2001 + +investigated eol parameter. + +implemented handling in ＠code{make-coding-system} of ＠code{eol-cr} and +＠code{eol-crlf}. fixed calls everywhere to ＠code{Fget_coding_system} / +＠code{Ffind_coding_system} to reject non-char->byte coding systems. + +still need to handle "query eol type using coding-system-property" so it +magically returns the right type by parsing the chain. + +no work done on formats, as mentioned below. we should consider using : +instead of || to indicate casting. + +＠heading early sep 9, 2001 + +renamed some codesys properties: `list' in chain -> chain; `subtype' in +unicode -> type. everything compiles again and sort of works; some CRLF +problems that may resolve themselves when i finish the convert-eol stuff. +the stuff to create subsidiaries has been rewritten to use chains; but i +still need to investigate how the EOL type parameter is used. also, still +need to implement this: when a coding system is created, and its eol type +is not autodetect or lf, a chain needs to be created and returned. i think +that what needs to happen is that the eol type can only be set to +autodetect or lf; later on this should be changed to simply be either +autodetect or not (but that would require ripping out the eol converting +stuff in the various coding systems), and eventually we will do the work on +the detection mechanism so it can do chain detection; then we won't need an +eol autodetect setting at all. i think there's a way to query the eol type +of a coding system; this should check to see if the coding system is a +chain and there's a convert-eol at the front; if so, the eol type comes +from the type of the convert-eol. + +also check out everywhere that ＠code{Fget_coding_system} or +＠code{Ffind_coding_system} is called, and see whether anything but a +char->byte system can be tolerated. create a new function for all the +places that only want char->byte, something like +＠samp{get_coding_system_char_to_byte_only}. + +think about specifying formats in make-coding-system. perhaps the name can +be a cons of (format1, format2), specifying that it encodes +format1->format2 and decodes the other way. if only one name is given, +that is assumed to be format2, and the other is either `byte' or `char' +depending on the end type. normally the user when decoding gives the +decoding order in formats, but can leave off the last one, `char', which is +assumed. perhaps we should say `internal' instead of `char' and `external' +instead of byte. a multichain might look like gzip|multibyte|unicode, +using the coding systems named `gzip', `(unicode . multibyte)' and +`unicode'. we would have to allow something where one format is given only +as generic byte/char or internal/external to fit with any of the same +byte/char type. when forcibly fitting together two converters that have +explicitly specified and incompatible names (say you have +unicode->multibyte and iso8859-1->ebcdic and you know that the multibyte +and iso8859-1 in this case are compatible), you can force-cast using ||, +like this: ebcdic|iso8859-1||multibyte|unicode. this will also force +external->internal translation as necessary: +unicode|multibyte||crlf|internal does unicode->multibyte, +external->internal, crlf->internal. perhaps you'd need to put in the +internal translation, like this: unicode|multibyte|internal||crlf|internal, +which means unicode->multibyte, external->internal (multibyte is compatible +with external); force-cast to crlf format and convert crlf->internal. + +＠heading even later: Sep 8, 2001 + +chain doesn't need to set character mode, that happens automatically when +the coding systems are created. fixed chain to return correct source/sink +type for itself and to check the compatibility of source/sink types in its +chain. fixed decode/encode-coding-region to check the source and sink +types of the coding system performing the conversion and insert appropriate +byte->char/char->byte converters (aka "binary" coding system). fixed +set-coding-category-system to only accept the traditional +encode-char-to-byte types of coding systems. + +still need to extend chain to specify the parameters mentioned below, +esp. "reverse". also need to extend the print mechanism for chain so it +prints out the chain. probably this should be general: have a new method +to return all properties, and output those properties. you could also +implement a read syntax for coding systems this way. + +still need to implement ＠code{convert-eol} and finish up the rest of the +eol stuff mentioned below. + +＠heading later September 7, 2001 (more like Sep 8) + +moved many ＠code{Lisp_Coding_System *} params to ＠code{Lisp_Object}. In +general this is the way to go, and if we ever implement a copying GC, we +will never want to be passing direct pointers around. With no +error-checking, we lose no cycles using ＠code{Lisp_Object}s in place of +pointers -- the ＠code{Lisp_Object} itself is nothing but a pointer, and +so all the casts and "dereferences" boil down to nothing. + +Clarified and cleaned up the "character mode" on streams, and documented +who (caller or object itself) has the right to be setting character mode +on a stream, depending on whether it's a read or write stream. changed +＠code{conversion_end_type} method and ＠code{enum source_sink_type} to +return encoding-centric values, rather than decoding-centric. for the +moment, we're going to be entirely encoding-centric in everything; we +can rethink later. fixed coding systems so that the decode and encode +methods are guaranteed to receive only full characters, if that's the +source type of the data, as per conversion_end_type. + +still need to fix the chain method so that it correctly sets the +character mode on all the lstreams in it and checks the source/sink +types to be compatible. also fix ＠code{decode-coding-string} and +friends to put the appropriate byte->character +(i.e. ＠code{no-conversion}) coding systems on the ends as necessary so +that the final ends are both character. also add to chain a parameter +giving the ability to switch the direction of conversion of any +particular item in the chain (i.e. swap encoding and decoding). i think +what we really want to do is allow for arbitrary parameters to be put +onto a particular coding system in the chain, of which the only one so +far is swap-encode-decode. don't need too much codage here for that, +but make the design extendable. + + + +＠heading September 7, 2001 + +just added a return value from the decode and encode methods of a coding +system, so that some of the data can get rejected. fixed the calling +routines to handle this. need to investigate when and whether the coding +lstream is set to character mode, so that the decode/encode methods only +get whole characters. if not, we should do so, according to the source +type of these methods. also need to implement the convert_eol coding +system, and fix the subsidiary coding systems (and in general, any coding +system where the eol type is specified and is not LF) to be chains +involving convert_eol. + +after everything is working, need to remove eol handling from encode/decode +methods and eventually consider rewriting (simplifying) them given the +reject ability. + +＠heading September 5, 2001 + +＠itemize +＠item +need to organize this. get everything below into the TODO list. +CVS the TODO list frequently so i can delete old stuff. prioritize +it!!!!!!!!! + +＠item +move ＠file{README.ben-mule...} to ＠file{STATUS.ben-mule...}; use +＠file{README} for intro, overview of what's new, what's broken, how to +use the features, etc. + +＠item +need a global and local ＠samp{coding-category-precedence} list, which +get merged. + +＠item +finished the BOM support. also finished something not listed below, +expansion to the auto-generator of Unicode-encapsulation to support +bracketing code with ＠samp{#if ... #endif}, for Cygwin and MINGW +problems, e.g. This is tested; appears to work. + +＠item +need to add more multibyte coding systems now that we have various +properties to specify them. need to add DEFUN's for mac-code-page +and ebcdic-code-page for completeness. need to rethink the whole +way that the priority list works. it will continue to be total +junk until multiple levels of likeliness get implemented. + +＠item +need to finish up the stuff about the various defaults. [need to +investigate more generally where all the different default values +are that control encoding. (there are six places or so.) need to +list them in ＠code{make-coding-system} docs and put pointers +elsewhere. [[[[#### what interface to specify that this default +should be unicode? a "Unicode" language environment seems too +drastic, as the language environment controls much more.]]]] even +skipping the Unicode stuff here, we need to survey and list the +variables that control coding page behavior and determine how they +need to be set for various possible scenarios: + + ＠itemize + ＠item + total binary: no detection at all. + + ＠item + raw-text only: wants only autodetection of line endings, nothing else. + + ＠item + "standard Windows environment": tries for Unicode, falls back on + code page encoding. + + ＠item + some sort of East European environment, and Russian. + + ＠item + some sort of standard Japanese Windows environment. + + ＠item + standard Chinese Windows environments (traditional and simplified) + + ＠item + various Unix environments (European, Japanese, Russian, etc.) + + ＠item + Unicode support in all of these when it's reasonable + ＠end itemize +＠end itemize + +These really require multiple likelihood levels to be fully +implementable. We should see what can be done ("gracefully fall +back") with single likelihood level. need lots of testing. + +＠itemize +＠item +need to fix the truename problem. + +＠item +lots of testing: need to test all of the stuff above and below that's +recently been implemented. +＠end itemize + + +＠heading September 4, 2001 + +mostly everything compiles. currently there is a crash in +＠code{parse-unicode-translation-table}, and Cygwin/Mule won't run. it +may well be a bug in the ＠code{sscanf()} in Cygwin. + +working on today: + +＠itemize +＠item +adding BOM support for Unicode coding systems. mostly there, but +need to finish adding BOM support to the detection routines. then test. + +＠item +adding properties to ＠code{unicode-to-multibyte} to specify the coding +system in various flexible ways, e.g. directly specified code page or +ansi or oem code page of specified locale, current locale, user-default +or system-default locale. need to test. + +＠item +creating a `multibyte' coding system, with the same parameters as +unicode-to-multibyte and which resolves at coding-system-creation +time to the appropriate chain. creating the underlying mechanism +to allow such under-the-scenes switcheroo. need to test. + +＠item +set default-value of ＠code{buffer-file-coding-system} to +mswindows-multibyte, as Matej said it should be. need to test. +need to investigate more generally where all the different default +values are that control encoding. (there are six places or so.) +need to list them in make-coding-system docs and put pointers +elsewhere. #### what interface to specify that this default should +be unicode? a "Unicode" language environment seems too drastic, as +the language environment controls much more. + +＠item +thinking about adding multiple levels of certainty to the detection +schemes, instead of just a mask. eventually, we need to totally +abstract things, but that can easier be done in many steps. (we +need multiple levels of likelihood to more reasonably support a +Windows environment with code-page type files. currently, in order +to get them detected, we have to put them first, because they can +look like lots of other things; but then, other encodings don't get +detected. with multiple levels of likelihood, we still put the +code-page categories first, but they will return low levels of +likelihood. Lower-down encodings may be able to return higher +levels of likelihood, and will get taken preferentially.) + +＠item +making it so you cannot disable file-coding, but you get an +equivalent default on Unix non-Mule systems where all defaults are +`binary'. need to test!!!!!!!!! +＠end itemize + +Matej (mostly, + some others) notes the following problems, and here +are possible solutions: + +＠itemize +＠item +he wants the defaults to work right. [figure out what those +defaults are. i presume they are auto-detection of data in current +code page and in unicode, and new files have current code page set +as their output encoding.] + +＠item +too easy to lose data with incorrect encodings. [need to set up an +error system for encoding/decoding. extremely important but a +little tricky to implement so let's deal with other issues now.] + +＠item +EOL isn't always detected correctly. [#### ?? need examples] + +＠item +truename isn't working: ＠file{c:\t.txt} and ＠file{c:\tmp.txt} have the +same truename. [should be easy to fix] + +＠item +unicode files lose the BOM mark. [working on this] + +＠item +command-line utilities use OEM. [actually it seems more +complicated. it seems they use the codepage of the console. we +may be able to set that, e.g. to UTF8, before we invoke a command. +need to investigate.] + +＠item +no way to handle unicode characters not recognized as charsets. [we +need to create something like 8 private 2-dimensional charsets to +handle all BMP Unicode chars. Obviously this is a stopgap +solution. Switching to Unicode internal will ultimately make life +far easier and remove the BMP limitation. but for now it will +work. we translate all characters where we have charsets into +chars in those charsets, and the remainder in a unicode charset. +that way we can save them out again and guarantee no data loss with +unicode. this creates font problems, though ...] + +＠item +problems with xemacs font handling. [xemacs font handling is not +sophisticated enough. it goes on a charset granularity basis and +only looks for a font whose name contains the corresponding windows +charset in it. with unicode this fails in various ways. for one +the granularity needs to be single character, so that those unicode +charsets mentioned above work; and it needs to query the font to +see what unicode ranges it supports, rather than just looking at +the charset ending.] +＠end itemize + + +＠heading August 28, 2001 + +working on getting everything to compile again: Cygwin, non-MULE, +pdump. not there yet. + +＠code{mswindows-multibyte} is now defined using chain, and works. +removed most vestiges of the ＠code{mswindows-multibyte} coding system +type. + +file-coding is on by default; should default to binary only on Unix. +Need to test. (Needs to compile first :-) + +＠heading August 26, 2001 + +I've fixed the issue of inputting non-ASCII text under -nuni, and done +some of the work on the Russian ＠key{C-x} problem -- we now compute the +other possibilities. We still need to fix the key-lookup code, though, +and that code is unfortunately a bit ugly. the best way, it seems, is +to expand the command-builder structure so you can specify different +interpretations for keys. (if we do find an alternative binding, though, +we need to mess with both the command builder and this-command-keys, as +does the function-key stuff. probably need to abstract that munging +code.) + +high-priority: + +＠table ＠strong + +＠item [currently doing] + +＠itemize +＠item +support for ＠code{WM_IME_CHAR}. IME input can work under ＠code{-nuni} +if we use ＠code{WM_IME_CHAR}. probably we should always be using this, +instead of snarfing input using ＠code{WM_COMPOSITION}. i'll check this +out. + +＠item +Russian ＠key{C-x} problem. see above. +＠end itemize + +＠item [clean-up] + +＠itemize +＠item +make sure it compiles and runs under non-mule. remember that some +code needs the unicode support, or at least a simple version of it. + +＠item +make sure it compiles and runs under pdump. see below. + +＠item +clean up ＠code{mswindows-multibyte}, ＠code{TSTR_TO_C_STRING}. see +below. [DONE] + +＠item +eliminate last vestiges of codepage<->charset conversion and similar stuff. +＠end itemize + +＠item [other] + +＠itemize +＠item +cut and paste. see below. +＠item +misc issues with handling lang environments. see also August 25, +"finally: working on the C-x in ...". + ＠itemize + ＠item + when switching lang env, needs to set keyboard layout. + ＠item + user var to control whether, when moving into text of a + particular language, we set the appropriate keyboard layout. we + would need to have a lisp api for retrieving and setting the + keyboard layout, set text properties to indicate the layout of + text, and have a way of dealing with text with no property on + it. (e.g. saved text has no text properties on it.) basically, + we need to get a keyboard layout from a charset; getting a + language would do. Perhaps we need a table that maps charsets + to language environments. + ＠item + test that the lang env is properly set at startup. test that + switching the lang env properly sets the C locale (call + setlocale(), set LANG, etc.) -- a spawned subprogram should have + the new locale in its environment. + ＠end itemize +＠item +look through everything below and see if anything is missed in this +priority list, and if so add it. create a separate file for the +priority list, so it can be updated as appropriate. +＠end itemize +＠end table + +mid-priority: + +＠itemize +＠item +clean up the chain coding system. its list should specify decode +order, not encode; i now think this way is more logical. it should +check the endpoints to make sure they make sense. it should also +allow for the specification of "reverse-direction coding systems": +use the specified coding system, but invert the sense of decode and +encode. + +＠item +along with that, places that take an arbitrary coding system and +expect the ends to be anything specific need to check this, and add +the appropriate conversions from byte->char or char->byte. + +＠item +get some support for arabic, thai, vietnamese, japanese jisx 0212: +at least get the unicode information in place and make sure we have +things tied together so that we can display them. worry about r2l +some other time. +＠end itemize + +＠heading August 25, 2001 + +There is actually more non-Unicode-ized stuff, but it's basically +inconsequential. (See previous note.) You can check using the file +nmkun.txt (#### RENAME), which is just a list of all the routines that +have been split. (It was generated from the output of `nmake +unicode-encapsulate', after removing everything from the output but +the function names.) Use something like + +＠example +fgrep -f ../nmkun.txt -w [a-hj-z]*.[ch] |m +＠end example + +in the source directory, which does a word match and skips +(a)file{intl-unicode-win32.[ch]} and ＠file{intl-win32.[ch]}, which have a +whole lot of references to these, unavoidably. It effectively detects +what needs to be changed because changed versions either begin +＠samp{qxe...} or end with A or W, and in each case there's no whole-word +match. + +The nasty bug has been fixed below. The ＠code{-nuni} option now works +-- all specially-written code to handle the encapsulation has been +tested by some operation (fonts by loadup and checking the output of +＠code{(list-fonts "")}; devmode by printing; dragdrop tests other +stuff). + +NOTE: for ＠code{-nuni} (Win 95), areas need work: + +＠itemize +＠item +cut and paste. we should be able to receive Unicode text if it's there, +and we should be able to receive it even in Win 95 or ＠code{-nuni}. we +should just check in all circumstances. also, under 95, when we put +some text in the clipboard, it may or may not also be automatically +enumerated as unicode. we need to test this out and/or just go ahead +and manually do the unicode enumeration. + +＠item +receiving keyboard input. we get only a single byte, but we should +be able to correlate the language of the keyboard layout to a +particular code page, so we can then decode it correctly. + +＠item +＠code{mswindows-multibyte}. still implemented as its own thing. should +be done as a chain of (encoding) unicode | unicode-to-multibyte. need +to turn this on, get it working, and look into optimizations in the dfc +stuff. (#### perhaps there's a general way to do these optimizations??? +something like having a method on a coding system that can specify +whether a pure-ASCII string gets rendered as pure-ASCII bytes and +vice-versa.) +＠end itemize + +ALSO: + +＠itemize +＠item +we have special macros ＠code{TSTR_TO_C_STRING} and such because formerly +the ＠samp{DFC} macros didn't know about external stuff that was Unicode +encoded and would call ＠code{strlen()} on them. this is fixed, so now +we should undo the special macros, make em normal, removal the comments +about this, and make sure it works. [DONE] + + +＠item +finally: working on the ＠kbd{C-x} in Russian key layout problem. in the +process will probably end up doing work on cleaning up the handling +of keyboard layouts, integrating or deleting the FSF stuff, adding +code to change the keyboard layout as we move in and out of text in +different languages (implemented as a post-command-hook; we need +something like internal-post-command-hook if not already there, for +internal stuff that doesn't want to get mixed up with the regular +post-command-hook; similar for pre-command-hook). also, when +langenv changes, ways to set the keyboard layout appropriately. + +＠item +i think the stuff above is higher priority than the other stuff +mentioned below. what i'm aiming for is to be able to input and +work with multiple languages without weird glitches, both under 95 +and NT. the problems above are all basic impediments to such work. +we assume for the moment that the user can make use of the existing +file i/o conversion stuff, and put that lower in priority, after +the basic input is working. + +＠item +i should get my modem connected and write up what's going on and +send it to the lists; also cvs commit my workspaces and get more +testers. +＠end itemize + +August 24, 2001: + +All code has been Unicode-ized except for some stuff in console-msw.c +that deals with console output. Much of the Unicode-encapsulation +stuff, particularly the hand-written stuff, really needs testing. I +added a new command-line option, ＠code{-nuni}, to force use of all ANSI +calls -- ＠code{XE_UNICODEP} evaluates to false in this case. + +There is a nasty bug that appeared recently, probably when the event +code got Unicode-ized -- bad interactions with OS sticky modifiers. +Hold the shift key down and release it, then instead of affecting the +next char only, it gets permanently stuck on (until you do a regular +shift+char stroke). This needs to be debugged. + +Other things on agenda: + +＠itemize +＠item +go through and prioritize what's listed below. + +＠item +make sure the pdump code can compile and work. for the moment we +just don't try to dump any Unicode tables and load them up each +time. this is certainly fast but ... + +＠item +there's the problem that XEmacs can't be run in a directory with +non-ASCII/Latin-1 chars in it, since it will be doing Unicode processing +before we've had a chance to load the tables. In fact, even finding the +tables in such a situation is problematic using the normal commands. my +idea is to eventually load the stuff extremely extremely early, at the +same time as the pdump data gets loaded. in fact, the unicode table +data (stored in an efficient binary format) can even be stuck into the +pdump file (which would mean as a resource to the executable, for +windows). we'd need to extend pdump a bit: to allow for attaching extra +data to the pdump file. (something like ＠code{pdump_attach_extra_data +(addr, length)} returns a number of some sort, an index into the file, +which you can then retrieve with ＠code{pdump_load_extra_data()}, which +returns an addr (＠code{mmap()}ed or loaded), and later you +＠code{pdump_unload_extra_data()} when finished. we'd probably also need +＠code{pdump_attach_extra_data_append()}, which appends data to the data +just written out with ＠code{pdump_attach_extra_data()}. this way, +multiple tables in memory can be written out into one contiguous +table. (we'd use the tar-like trick of allowing new blocks to be written +without going back to change the old blocks -- we just rely on the end +of file/end of memory.) this same mechanism could be extracted out of +pdump and used to handle the non-pdump situation (or alternatively, we +could just dump either the memory image of the tables themselves or the +compressed binary version). in the case of extra unicode tables not +known about at compile time that get loaded before dumping, we either +just dump them into the image (pdump and all) or extract them into the +compressed binary format, free the original tables, and treat them like +all other tables. + +＠item +＠kbd{C-x b} when using a Russian keyboard layout. XEmacs currently +tries to interpret ＠samp{C+cyrillic char}, which causes an error. We +want ＠kbd{C-x b} to still work even when the keyboard normally generates +Cyrillic. What we should do is expand the keyboard event structure so +that it contains not only the actual char, but what the char would have +been in various other keyboard layouts, and in contexts where only +certain keystrokes make sense (creating control chars, and looking up in +keymaps), we proceed in order, processing each of them until we get +something. order should be something like: current keyboard layout; +layout of the current language environment; layout of the user's default +language; layout of the system default language; layout of US English. + +＠item +reading and writing Unicode files. multiple problems: + + ＠itemize + ＠item + EOL's aren't handled right. for the moment, just fix the + Unicode coding systems; later on, create EOL-only coding + systems: + + ＠enumerate + ＠item + they would be character->character and operate next to the + internal data; this means that coding systems need to be able + to handle ends of lines that are either CR, LF, or CRLF. + usually this isn't a problem, as they are just characters + like any other and get encoded appropriately. however, + coding systems that are line-oriented need to recognize any + of the three as line endings. + + ＠item + we'd also have to complete the stuff that handles coding + systems where either end can be byte or char (four + possibilities total; use a single enum such as + ＠code{ENCODES_CHAR_TO_BYTE}, ＠code{ENCODES_BYTE_TO_BYTE}, etc.). + + ＠item + we'd need ways of specifying the chaining of coding systems. + e.g. when reading a coding system, a user can specify more + than one with a | symbol between them. when a context calls + for a coding system and a chain is needed, the `chain' coding + system is useful; but we should really expand the contexts + where a list of coding systems can be given, and whenever + possible try to inline the chain instead of using a + surrounding ＠code{chain} coding system. + + ＠item + the ＠code{chain} needs some work so that it passes all sorts of + lstream commands down to the chain inside it -- it should be + entirely transparent and the fact that there's actually a + surrounding coding system should be invisible. more general + coding system methods might need to be created. + + ＠item + important: we need a way of specifying how detecting works + when we have more than one coding system. we might need more + than a single priority list. need to think about this. + ＠end enumerate + + ＠item + Unicode files beginning with the BOM are not recognized as such. + we need to fix this; but to make things sensible, we really need + to add the idea of different levels of confidence regarding + what's detected. otherwise, Unicode says "yes this is me" but + others higher up do too. in the process we should probably + finish abstracting the detection system and fix up some + stupidities in it. + + ＠item + When writing a file, we need error detection; otherwise somebody + will create a Unicode file without realizing the coding system + of the buffer is Raw, and then lose all the non-ASCII/Latin-1 + text when it's written out. We need two levels + + ＠enumerate + ＠item + first, a "safe-charset" level that checks before any actual + encoding to see if all characters in the document can safely + be represented using the given coding system. FSF has a + "safe-charset" property of coding systems, but it's stupid + because this information can be automatically derived from + the coding system, at least the vast majority of the time. + What we need is some sort of + alternative-coding-system-precedence-list, langenv-specific, + where everything on it can be checked for safe charsets and + then the user given a list of possibilities. When the user + does "save with specified encoding", they should see the same + precedence list. Again like with other precedence lists, + there's also a global one, and presumably all coding systems + not on other list get appended to the end (and perhaps not + checked at all when doing safe-checking?). safe-checking + should work something like this: compile a list of all + charsets used in the buffer, along with a count of chars + used. that way, "slightly unsafe" charsets can perhaps be + presented at the end, which will lose only a few characters + and are perhaps what the users were looking for. + + ＠item + when actually writing out, we need error checking in case an + individual char in a charset can't be written even though the + charsets are safe. again, the user gets the choice of other + reasonable coding systems. + + ＠item + same thing (error checking, list of alternatives, etc.) needs + to happen when reading! all of this will be a lot of work! + ＠end enumerate + ＠end itemize +＠end itemize + + + +＠heading Announcement, August 20, 2001: + +I'm looking for testers. There is a complete and fast implementation +in C of Unicode conversion, translations for almost all of the +standardly-defined charsets that load up automatically and +instantaneously at runtime, coding systems supporting the common +external representations of Unicode [utf-16, ucs-4, utf-8, +little-endian versions of utf-16 and ucs-4; utf-7 is sitting there +with abort[]s where the coding routines should go, just waiting for +somebody to implement], and a nice set of primitives for translating +characters<->codepoints and setting the priority lists used to control +codepoint->char lookup. + +It's so far hooked into one place: the Windows IME. Currently I can +select the Japanese IME from the thing on my tray pad in the lower +right corner of the screen, and type Japanese into XEmacs, and you get +Japanese in XEmacs -- regardless of whether you set either your +current or global system locale to Japanese,and regardless of whether +you set your XEmacs lang env as Japanese. This should work for many +other languages, too -- Cyrillic, Chinese either Traditional or +Simplified, and many others, but YMMV. There may be some lurking +bugs (hardly surprising for something so raw). + +To get at this, checkout using `ben-mule-21-5', NOT the simpler +*`mule-21-5'. For example + +cvs -d :pserver:xemacs＠＠cvs.xemacs.org:/usr/CVSroot checkout -r ben-mule-21-5 xemacs + +or you get the idea. the `-r ben-mule-21-5' is important. + +I keep track of my progress in a file called README.ben-mule-21-5 in +the root directory of the source tree. + +WARNING: Pdump might not work. Will be fixed rsn. + +＠heading August 20, 2001 + +＠itemize +＠item +still need to sort out demand loading, binary format, etc. figure +out what the goals are and how we're going to achieve them. for +the moment let's just say that running XEmacs in a directory with +Japanese or other weird characters in the name is likely to cause +problems under MS Windows, but once XEmacs is initialized (and +before processing init files), all Unicode support is there. + +＠item +wrote the size computation routines, although not yet tested. + +＠item +lots more abstraction of coding systems; almost done. + +＠item +UNICODE WORKS!!!!! +＠end itemize + +＠heading August 19, 2001 + +Still needed on the Unicode support: + +＠itemize +＠item +demand loading: load the Unicode table data the first time a +conversion needs to be done. + +＠item +maybe: table size computation: figure out how big the in-memory +tables actually are. + +＠item +maybe: create a space-efficient binary format for the data, and a +way to dump out an existing charset's data into this binary format. +it should allow for many such groups of data to be appended +together in one file, such that you can just append the new data +onto the end and not have to go back and modify anything +previously. (like how tar archives work, and how the UFS? for +CD-R's and CD-RW's works.) + +＠item +maybe: figure out how to be able to access the Unicode tables at +＠code{init_intl()} time, before we know how to get at data-directory; +that way we can handle the need for unicode conversions that come up +very early, for example if XEmacs is run from a directory containing +Japanese in it. Presumably we'd want to generalize the stuff in +(a)file{pdump.c} that deals with the dumper file, so that it can handle +other files -- putting the file either in the directory of the +executable or in a resource, maybe actually attached to the pdump file +itself -- or maybe we just dump the data into the actual executable. +With pdump we could extend pdump to allow for data that's in the pdump +file but not actually mapped at startup, separate from the data that +does get mapped -- and then at runtime the pointer gets restored not +with a real pointer but an offset into the file; another pdump call and +we get some way to access the data. (tricky because it might be in a +resource, not a file. we might have to just tell pdump to mmap or +whatever the data in, and then tell pdump to release it.) + +＠item +fix multibyte to use unicode. at first, just reverse +＠code{mswindows-multibyte-to-unicode} to be ＠code{unicode-to-multibyte}; +later implement something in chain to allow for reversal, for declaring +the ends of the coding systems, etc. + +＠item +actually make sure that the IME stuff is working!!! +＠end itemize + +Other things before announcing: + +＠itemize +＠item +change so that the Unicode tables are not pdumped. This means we need +to free any table data out there. Make sure that pdump compiles and try +to finish the pretty-much-already-done stuff already with +＠code{XD_STRUCT_ARRAY} and dynamic size computation; just need to see +what's going on with ＠code{LO_LINK}. +＠end itemize + +＠heading August 14, 2001 + +To do a diff between this workspace and the mainline, use the most recent sync tags, currently: + +＠example +cvs diff -r main-branch-ben-mule-21-5-aug-11-2001-sync -r ben-mule-21-5-post-aug-11-2001-sync +＠end example + +Unicode support: + +Unicode support is important for supporting many languages under +Windows, such as Cyrillic, without resorting to translation tables for +particular Windows-specific code pages. Internally, all characters in +Windows can be represented in two encodings: code pages and Unicode. +With Unicode support, we can seamlessly support all Windows +characters. Currently, the test in the drive to support Unicode is if +IME input works properly, since it is being converted from Unicode. + +Unicode support also requires that the various Windows API's be +"Unicode-encapsulated", so that they automatically call the ANSI or +Unicode version of the API call appropriately and handle the size +differences in structures. What this means is: + +＠itemize +＠item +first, note that Windows already provides a sort of encapsulation +of all API's that deal with text. All such API's are underlyingly +provided in two versions, with an A or W suffix (ANSI or "wide" +i.e. Unicode), and the compile-time constant UNICODE controls which +is selected by the unsuffixed API. Same thing happens with +structures. Unfortunately, this is compile-time only, not +run-time, so not sufficient. (Creating the necessary run-time +encoding is not conceptually difficult, but very time-consuming to +write. It adds no significant overhead, and the only reason it's +not standard in Windows is conscious marketing attempts by +Microsoft to cripple Windows 95. FUCK MICROSOFT! They even +describe in a KnowledgeBase article exactly how to create such an +API [although we don't exactly follow their procedure], and point +out its usefulness; the procedure is also described more generally +in Nadine Kano's book on Win32 internationalization -- written SIX +YEARS AGO! Obviously Microsoft has such an API available +internally.) + +＠item +what we do is provide an encapsulation of each standard Windows API +call that is split into A and W versions. current theory is to +avoid all preprocessor games; so we name the function with a prefix +-- "qxe" currently -- and require callers to use the prefixed name. +Callers need to explicitly use the W version of all structures, and +convert text themselves using ＠code{Qmswindows_tstr}. the qxe +encapsulated version will automatically call the appropriate A or W +version depending on whether we're running on 9x or NT, and copy +data between W and A versions of the structures as necessary. + +＠item +We require the caller to handle the actual translation of text to +avoid possible overflow when dealing with fixed-size Windows +structures. There are no such problems when copying data between +the A and W versions because ANSI text is never larger than its +equivalent Unicode representation. + +＠item +We allow for incremental creation of the encapsulated routines by using +the coding system ＠code{Qmswindows_tstr_notyet}. This is an alias for +＠code{Qmswindows_multibyte}, i.e. it always converts to ANSI; but it +indicates that it will be changed to ＠code{Qmswindows_tstr} when we have +a qxe version of the API call that the data is being passed to and +change the code to use the new function. +＠end itemize + +Besides creating the encapsulation, the following needs to be done for +Unicode support: + +＠itemize +＠item +No actual translation tables are fed into XEmacs. We need to +provide glue code to read the tables in ＠file{etc/unicode}. See +＠file{etc/unicode/README} for the interface to implement. + +＠item +Fix pdump. The translation tables for Unicode characters function as +unions of structures with different numbers of indirection levels, in +order to be efficient. pdump doesn't yet support such unions. +(a)file{charset.h} has a general description of how the translation tables +work, and the pdump code has constants added for the new required data +types, and descriptions of how these should work. + +＠item +ultimately, there's no end to additional work (composition, bidi +reordering, glyph shaping/ordering, etc.), but the above is enough +to get basic translation working. +＠end itemize + +Merging this workspace into the trunk requires some work. ChangeLogs +have not yet been created. Also, there is a lot of additional code in +this workspace other than just Windows and Unicode stuff. Some of the +changes have been somewhat disruptive to the code base, in particular: + +＠itemize +＠item +the code that handles the details of processing multilingual text has +been consolidated to make it easier to extend it. it has been yanked +out of various files (＠file{buffer.h}, ＠file{mule-charset.h}, +(a)file{lisp.h}, ＠file{insdel.c}, ＠file{fns.c}, ＠file{file-coding.c}, +etc.) and put into ＠file{text.c} and ＠file{text.h}. +(a)file{mule-charset.h} has also been renamed ＠file{charset.h}. all long +comments concerning the representations and their processing have been +consolidated into ＠file{text.c}. + +＠item +(a)file{nt/config.h} has been eliminated and everything in it merged into +(a)file{config.h.in} and ＠file{s/windowsnt.h}. see ＠file{config.h.in} for +more info. + +＠item +(a)file{s/windowsnt.h} has been completely rewritten, and +(a)file{s/cygwin32.h} and ＠file{s/mingw32.h} have been largely rewritten. +tons of dead weight has been removed, and stuff common to more than one +file has been isolated into ＠file{s/win32-common.h} and +(a)file{s/win32-native.h}, similar to what's already done for usg +variants. + +＠item +large amounts of code throughout the code base have been Mule-ized, +not just Windows code. + +＠item +(a)file{file-coding.c/.h} have been largely rewritten (although still +mostly syncable); see below. +＠end itemize + + +＠heading June 26, 2001 + +ben-mule-21-5 + +this contains all the mule work i've been doing. this includes mostly +work done to get mule working under ms windows, but in the process +i've [of course] fixed a whole lot of other things as well, mostly +mule issues. the specifics: + +＠itemize +＠item +it compiles and runs under windows and should basically work. the +stuff remaining to do is (a) improved unicode support (see below) +and (b) smarter handling of keyboard layouts. in particular, it +should (1) set the right keyboard layout when you change your +language environment; (2) optionally (a user var) set the +appropriate keyboard layout as you move the cursor into text in a +particular language. + +＠item +i added a bunch of code to better support OS locales. it tries to +notice your locale at startup and set the language environment +accordingly (this more or less works), and call setlocale() and set +LANG when you change the language environment (may or may not work). + +＠item +major rewriting of file-coding. it's mostly abstracted into coding +systems that are defined by methods (similar to devices and +specifiers), with the ultimate aim being to allow non-i18n coding +systems such as gzip. there is a "chain" coding system that allows +multiple coding systems to be chained together. (it doesn't yet +have the concept that either end of a coding system can be bytes or +chars; this needs to be added.) + +＠item +unicode support. very raw. a few days ago i wrote a complete and +efficient implementation of unicode translation. it should be very +fast, and fairly memory-efficient in its tables. it allows for +charset priority lists, which should be language-environment +specific (but i haven't yet written the glue code). it works in +preliminary testing, but obviously needs more testing and work. +as of yet there is no translation data added for the standard charsets. +the tables are in etc/unicode, and all we need is a bit of glue code +to process them. see etc/unicode/README for the interface to +implement. + +＠item +support for unicode in windows is partly there. this will work even +on windows 95. the basic model is implemented but it needs finishing +up. + +＠item +there is a preliminary implementation of windows ime support courtesy +of ikeyama. + +＠item +if you want to get cyrillic working under windows (it appears to "work" +but the wrong chars currently appear), the best way is to add unicode +support for iso-8859-5 and use it in redisplay-msw.c. we are already +passing unicode codepoints to the text-draw routine (ExtTextOutW). +(ExtTextOutW and GetTextExtentPoint32W are implemented on both 95 and NT.) + +＠item +i fixed the iso2022 handling so it will correctly read in files +containing unknown charsets, creating a "temporary" charset which can +later be overwritten by the real charset when it's defined. this allows +iso2022 elisp files with literals in strange languages to compile +correctly under mule. i also added a hack that will correctly read in +and write out the emacs-specific "composition" escape sequences, +i.e. ＠samp{ESC 0} through ＠samp{ESC 4}. this means that my workspace correctly +compiles the new file ＠file{devanagari.el} that i added (see below). + +＠item +i copied the remaining language-specific files from fsf. i made +some minor changes in certain cases but for the most part the stuff +was just copied and may not work. + +＠item +i fixed ＠code{post-read-conversion} in coding systems to follow fsf +conventions. (i also support our convention, for the moment. a +kludge, of course.) + +＠item +＠code{make-coding-system} accepts (but ignores) the additional properties +present in the fsf version, for compatibility. +＠end itemize + + + +＠node Consoles; Devices; Frames; Windows, The Redisplay Mechanism, Multilingual Support, Top +＠chapter Consoles; Devices; Frames; Windows +＠cindex consoles; devices; frames; windows +＠cindex devices; frames; windows, consoles; +＠cindex frames; windows, consoles; devices; +＠cindex windows, consoles; devices; frames; + +＠menu +* Introduction to Consoles; Devices; Frames; Windows:: +* Point:: +* Window Hierarchy:: +* The Window Object:: +* Modules for the Basic Displayable Lisp Objects:: +＠end menu + +＠node Introduction to Consoles; Devices; Frames; Windows, Point, Consoles; Devices; Frames; Windows, Consoles; Devices; Frames; Windows +＠section Introduction to Consoles; Devices; Frames; Windows +＠cindex consoles; devices; frames; windows, introduction to +＠cindex devices; frames; windows, introduction to consoles; +＠cindex frames; windows, introduction to consoles; devices; +＠cindex windows, introduction to consoles; devices; frames; + +A window-system window that you see on the screen is called a +＠dfn{frame} in Emacs terminology. Each frame is subdivided into one or +more non-overlapping panes, called (confusingly) ＠dfn{windows}. Each +window displays the text of a buffer in it. (See above on Buffers.) Note +that buffers and windows are independent entities: Two or more windows +can be displaying the same buffer (potentially in different locations), +and a buffer can be displayed in no windows. + + A single display screen that contains one or more frames is called +a ＠dfn{display}. Under most circumstances, there is only one display. +However, more than one display can exist, for example if you have +a ＠dfn{multi-headed} console, i.e. one with a single keyboard but +multiple displays. (Typically in such a situation, the various +displays act like one large display, in that the mouse is only +in one of them at a time, and moving the mouse off of one moves +it into another.) In some cases, the different displays will +have different characteristics, e.g. one color and one mono. + + XEmacs can display frames on multiple displays. It can even deal +simultaneously with frames on multiple keyboards (called ＠dfn{consoles} in +XEmacs terminology). Here is one case where this might be useful: You +are using XEmacs on your workstation at work, and leave it running. +Then you go home and dial in on a TTY line, and you can use the +already-running XEmacs process to display another frame on your local +TTY. + + Thus, there is a hierarchy console -> display -> frame -> window. +There is a separate Lisp object type for each of these four concepts. +Furthermore, there is logically a ＠dfn{selected console}, +＠dfn{selected display}, ＠dfn{selected frame}, and ＠dfn{selected window}. +Each of these objects is distinguished in various ways, such as being the +default object for various functions that act on objects of that type. +Note that every containing object remembers the ``selected'' object +among the objects that it contains: e.g. not only is there a selected +window, but every frame remembers the last window in it that was +selected, and changing the selected frame causes the remembered window +within it to become the selected window. Similar relationships apply +for consoles to devices and devices to frames. + +＠node Point, Window Hierarchy, Introduction to Consoles; Devices; Frames; Windows, Consoles; Devices; Frames; Windows +＠section Point +＠cindex point + + Recall that every buffer has a current insertion position, called +＠dfn{point}. Now, two or more windows may be displaying the same buffer, +and the text cursor in the two windows (i.e. ＠code{point}) can be in +two different places. You may ask, how can that be, since each +buffer has only one value of ＠code{point}? The answer is that each window +also has a value of ＠code{point} that is squirreled away in it. There +is only one selected window, and the value of ``point'' in that buffer +corresponds to that window. When the selected window is changed +from one window to another displaying the same buffer, the old +value of ＠code{point} is stored into the old window's ``point'' and the +value of ＠code{point} from the new window is retrieved and made the +value of ＠code{point} in the buffer. This means that ＠code{window-point} +for the selected window is potentially inaccurate, and if you +want to retrieve the correct value of ＠code{point} for a window, +you must special-case on the selected window and retrieve the +buffer's point instead. This is related to why ＠code{save-window-excursion} +does not save the selected window's value of ＠code{point}. + +＠node Window Hierarchy, The Window Object, Point, Consoles; Devices; Frames; Windows +＠section Window Hierarchy +＠cindex window hierarchy +＠cindex hierarchy of windows + + If a frame contains multiple windows (panes), they are always created +by splitting an existing window along the horizontal or vertical axis. +Terminology is a bit confusing here: to ＠dfn{split a window +horizontally} means to create two side-by-side windows, i.e. to make a +＠emph{vertical} cut in a window. Likewise, to ＠dfn{split a window +vertically} means to create two windows, one above the other, by making +a ＠emph{horizontal} cut. + + If you split a window and then split again along the same axis, you +will end up with a number of panes all arranged along the same axis. +The precise way in which the splits were made should not be important, +and this is reflected internally. Internally, all windows are arranged +in a tree, consisting of two types of windows, ＠dfn{combination} windows +(which have children, and are covered completely by those children) and +＠dfn{leaf} windows, which have no children and are visible. Every +combination window has two or more children, all arranged along the same +axis. There are (logically) two subtypes of windows, depending on +whether their children are horizontally or vertically arrayed. There is +always one root window, which is either a leaf window (if the frame +contains only one window) or a combination window (if the frame contains +more than one window). In the latter case, the root window will have +two or more children, either horizontally or vertically arrayed, and +each of those children will be either a leaf window or another +combination window. + + Here are some rules: + +＠enumerate +＠item +Horizontal combination windows can never have children that are +horizontal combination windows; same for vertical. + +＠item +Only leaf windows can be split (obviously) and this splitting does one +of two things: (a) turns the leaf window into a combination window and +creates two new leaf children, or (b) turns the leaf window into one of +the two new leaves and creates the other leaf. Rule (1) dictates which +of these two outcomes happens. + +＠item +Every combination window must have at least two children. + +＠item +Leaf windows can never become combination windows. They can be deleted, +however. If this results in a violation of (3), the parent combination +window also gets deleted. + +＠item +All functions that accept windows must be prepared to accept combination +windows, and do something sane (e.g. signal an error if so). +Combination windows ＠emph{do} escape to the Lisp level. + +＠item +All windows have three fields governing their contents: +these are ＠dfn{hchild} (a list of horizontally-arrayed children), +＠dfn{vchild} (a list of vertically-arrayed children), and ＠dfn{buffer} +(the buffer contained in a leaf window). Exactly one of +these will be non-＠code{nil}. Remember that ＠dfn{horizontally-arrayed} +means ``side-by-side'' and ＠dfn{vertically-arrayed} means +＠dfn{one above the other}. + +＠item +Leaf windows also have markers in their ＠code{start} (the +first buffer position displayed in the window) and ＠code{pointm} +(the window's stashed value of ＠code{point}---see above) fields, +while combination windows have ＠code{nil} in these fields. + +＠item +The list of children for a window is threaded through the +＠code{next} and ＠code{prev} fields of each child window. + +＠item +＠strong{Deleted windows can be undeleted}. This happens as a result of +restoring a window configuration, and is unlike frames, displays, and +consoles, which, once deleted, can never be restored. Deleting a window +does nothing except set a special ＠code{dead} bit to 1 and clear out the +＠code{next}, ＠code{prev}, ＠code{hchild}, and ＠code{vchild} fields, for +GC purposes. + +＠item +Most frames actually have two top-level windows---one for the +minibuffer and one (the ＠dfn{root}) for everything else. The modeline +(if present) separates these two. The ＠code{next} field of the root +points to the minibuffer, and the ＠code{prev} field of the minibuffer +points to the root. The other ＠code{next} and ＠code{prev} fields are +＠code{nil}, and the frame points to both of these windows. +Minibuffer-less frames have no minibuffer window, and the ＠code{next} +and ＠code{prev} of the root window are ＠code{nil}. Minibuffer-only +frames have no root window, and the ＠code{next} of the minibuffer window +is ＠code{nil} but the ＠code{prev} points to itself. (#### This is an +artifact that should be fixed.) +＠end enumerate + +＠node The Window Object, Modules for the Basic Displayable Lisp Objects, Window Hierarchy, Consoles; Devices; Frames; Windows +＠section The Window Object +＠cindex window object, the +＠cindex object, the window + + Windows have the following accessible fields: + +＠table ＠code +＠item frame +The frame that this window is on. + +＠item mini_p +Non-＠code{nil} if this window is a minibuffer window. + +＠item buffer +The buffer that the window is displaying. This may change often during +the life of the window. + +＠item dedicated +Non-＠code{nil} if this window is dedicated to its buffer. + +＠item pointm +＠cindex window point internals +This is the value of point in the current buffer when this window is +selected; when it is not selected, it retains its previous value. + +＠item start +The position in the buffer that is the first character to be displayed +in the window. + +＠item force_start +If this flag is non-＠code{nil}, it says that the window has been +scrolled explicitly by the Lisp program. This affects what the next +redisplay does if point is off the screen: instead of scrolling the +window to show the text around point, it moves point to a location that +is on the screen. + +＠item last_modified +The ＠code{modified} field of the window's buffer, as of the last time +a redisplay completed in this window. + +＠item last_point +The buffer's value of point, as of the last time +a redisplay completed in this window. + +＠item left +This is the left-hand edge of the window, measured in columns. (The +leftmost column on the screen is ＠w{column 0}.) + +＠item top +This is the top edge of the window, measured in lines. (The top line on +the screen is ＠w{line 0}.) + +＠item height +The height of the window, measured in lines. + +＠item width +The width of the window, measured in columns. + +＠item next +This is the window that is the next in the chain of siblings. It is +＠code{nil} in a window that is the rightmost or bottommost of a group of +siblings. + +＠item prev +This is the window that is the previous in the chain of siblings. It is +＠code{nil} in a window that is the leftmost or topmost of a group of +siblings. + +＠item parent +Internally, XEmacs arranges windows in a tree; each group of siblings has +a parent window whose area includes all the siblings. This field points +to a window's parent. + +Parent windows do not display buffers, and play little role in display +except to shape their child windows. Emacs Lisp programs usually have +no access to the parent windows; they operate on the windows at the +leaves of the tree, which actually display buffers. + +＠item hscroll +This is the number of columns that the display in the window is scrolled +horizontally to the left. Normally, this is 0. + +＠item use_time +This is the last time that the window was selected. The function +＠code{get-lru-window} uses this field. + +＠item display_table +The window's display table, or ＠code{nil} if none is specified for it. + +＠item update_mode_line +Non-＠code{nil} means this window's mode line needs to be updated. + +＠item base_line_number +The line number of a certain position in the buffer, or ＠code{nil}. +This is used for displaying the line number of point in the mode line. + +＠item base_line_pos +The position in the buffer for which the line number is known, or ＠code{nil} meaning none is known. ＠item region_showing ＠＠ -17400,6 +20403,42 ＠＠ The name of the terminal that the subpro or ＠code{nil} if it is using pipes. ＠end table +＠menu +* Ben's separate stderr notes:: Probably obsolete. +＠end menu + + +＠node Ben's separate stderr notes, , , Subprocesses +＠subsection Ben's separate stderr notes (probably obsolete) + +This node contains some notes that Ben kept on his separate subprocess +workspace. These notes probably describe changes and features that have +already been included in XEmacs 21.5; somebody should check and/or ask +Ben. + +＠heading ben-separate-stderr-improved-error-trapping + +this is an old workspace, very close to being done, containing + +＠itemize +＠item +subprocess stderr output can be read separately; needed to fully +implement call-process with asynch. subprocesses. + +＠item +huge improvements to the internal error-trapping routines (i.e. the +routines that call Lisp code and trap errors); Lisp code can now be +called from within redisplay. + +＠item +cleanup and simplification of C-g handling; some things work now +that never used to. + +＠item +see the ChangeLogs in the workspace. +＠end itemize + + ＠node Interface to MS Windows, Interface to the X Window System, Subprocesses, Top ＠chapter Interface to MS Windows ＠cindex MS Windows, interface to ＠＠ -17410,6 +20449,7 ＠＠ or ＠code{nil} if it is using pipes. * Windows Build Flags:: * Windows I18N Introduction:: * Modules for Interfacing with MS Windows:: +* CHANGES from 21.4-windows branch:: Probably obsolete. ＠end menu ＠node Different kinds of Windows environments, Windows Build Flags, Interface to MS Windows, Interface to MS Windows ＠＠ -17875,7 +20915,7 ＠＠ string of either regular or wide chars, prepended with an L (causing it to be a wide string) depending on XEUNICODE_P. -＠node Modules for Interfacing with MS Windows, , Windows I18N Introduction, Interface to MS Windows +＠node Modules for Interfacing with MS Windows, CHANGES from 21.4-windows branch, Windows I18N Introduction, Interface to MS Windows ＠section Modules for Interfacing with MS Windows ＠cindex modules for interfacing with MS Windows ＠cindex interfacing with MS Windows, modules for ＠＠ -17936,6 +20976,195 ＠＠ Auto-generated Unicode encapsulation fun ＠item intl-auto-encap-win32.h Auto-generated Unicode encapsulation headers ＠end table + + +＠node CHANGES from 21.4-windows branch, , Modules for Interfacing with MS Windows, Interface to MS Windows +＠section CHANGES from 21.4-windows branch (probably obsolete) + +This node contains the ＠file{CHANGES-msw} log that Andy Piper kept while +he was maintaining the Windows branch of 21.4. These changes have +(presumably) long since been merged to both 21.4 and 21.5, but let's not +throw the list away yet. + +＠heading CHANGES-msw + +This file briefly describes all mswindows-specific changes to XEmacs +in the OXYMORON series of releases. The mswindows release branch +contains additional changes on top of the mainline XEmacs +release. These changes are deemed necessary for XEmacs to be fully +functional under mswindows. It is not intended that these changes +cause problems on UNIX systems, but they have not been tested on UNIX +platforms. Caveat Emptor. + +See the file ＠file{CHANGES-release} for a full list of mainline changes. + +＠heading to XEmacs 21.4.9 "Informed Management (Windows)" + +＠itemize +＠item +Fix layout of widgets so that the search dialog works. + +＠item +Fix focus capture of widgets under X. +＠end itemize + +＠heading to XEmacs 21.4.8 "Honest Recruiter (Windows)" + +＠itemize +＠item +All changes from 21.4.6 and 21.4.7. + +＠item +Make sure revert temporaries are not visiting files. Suggested by +Mike Alexander. + +＠item +File renaming fix from Mathias Grimmberger. + +＠item +Fix printer metrics on windows 95 from Jonathan Harris. + +＠item +Fix layout of widgets so that the search dialog works. + +＠item +Fix focus capture of widgets under X. + +＠item +Buffers tab doc fixes from John Palmieri. + +＠item +Sync with FSF custom ＠code{:set-after} behavior. + +＠item +Virtual window manager freeze fix from Rick Rankin. + +＠item +Fix various printing problems. + +＠item +Enable windows printing on cygwin. +＠end itemize + +＠heading to XEmacs 21.4.7 "Economic Science (Windows)" + +＠itemize +＠item +All changes from 21.4.6. + +＠item +Fix problems with auto-revert with noconfirm. + +＠item +Undo autoconf 2.5x changes. + +＠item +Undo 21.4.7 process change. +＠end itemize + +to XEmacs 21.4.6 "Common Lisp (Windows)" + +＠itemize +＠item +Made native registry entries match the installer. + +＠item +Fixed mousewheel lockups. + +＠item +Frame iconifcation fix from Adrian Aichner. + +＠item +Fixed some printing problems. + +＠item +Netinstaller updated to support kit revisions. + +＠item +Fixed customize popup menus. + +＠item +Fixed problems with too many dialog popups. + +＠item +Netinstaller fixed to correctly upgrade shortcuts when upgrading +core XEmacs. + +＠item +Fix for virtual window managers from Adrian Aichner. + +＠item +Installer registers all C++ file types. + +＠item +Short-filename fix from Peter Arius. + +＠item +Fix for GC assertions from Adrian Aichner. + +＠item +Winclient DDE client from Alastair Houghton. + +＠item +Fix event assert from Mike Alexander. + +＠item +Warning removal noticed by Ben Wing. + +＠item +Redisplay glyph height fix from Ben Wing. + +＠item +Printer margin fix from Jonathan Harris. + +＠item +Error dialog fix suggested by Thomas Vogler. + +＠item +Fixed revert-buffer to not revert in the case that there is +nothing to be done. + +＠item +Glyph-baseline fix from Nix. + +＠item +Fixed clipping of wide glyphs in non-zero-length extents. + +＠item +Windows build fixes. + +＠item +Fixed ＠code{:initial-focus} so that it works. +＠end itemize + +＠heading to XEmacs 21.4.5 "Civil Service (Windows)" + +＠itemize +＠item +Fixed a scrollbar problem when selecting the frame with focus. + +＠item +Fixed ＠code{mswindows-shell-execute} under cygwin. + +＠item +Added a new function ＠code{mswindows-cygwin-to-win32-path} for JDE. + +＠item +Added support for dialog-based directory selection. + +＠item +The installer version has been updated to the 21.5 netinstaller. The 21.5 +installer now does proper dde file association and adds uninstall +capability. + +＠item +Handle leak fix from Mike Alexander. + +＠item +New release build script. +＠end itemize + + ＠node Interface to the X Window System, Dumping, Interface to MS Windows, Top ＠chapter Interface to the X Window System 1.57 +2 -1 XEmacs/xemacs/modules/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/modules/ChangeLog,v retrieving revision 1.56 retrieving revision 1.57 diff -u -p -r1.56 -r1.57 --- ChangeLog 2006/02/26 13:44:58 1.56 +++ ChangeLog 2006/03/31 17:51:32 1.57 ＠＠ -419,7 +419,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.46 +2 -1 XEmacs/xemacs/netinstall/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/netinstall/ChangeLog,v retrieving revision 1.45 retrieving revision 1.46 diff -u -p -r1.45 -r1.46 --- ChangeLog 2006/02/26 13:45:10 1.45 +++ ChangeLog 2006/03/31 17:51:33 1.46 ＠＠ -152,7 +152,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.201 +2 -1 XEmacs/xemacs/nt/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/nt/ChangeLog,v retrieving revision 1.200 retrieving revision 1.201 diff -u -p -r1.200 -r1.201 --- ChangeLog 2006/03/14 00:09:09 1.200 +++ ChangeLog 2006/03/31 17:51:33 1.201 ＠＠ -883,7 +883,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.31 +2 -1 XEmacs/xemacs/nt/installer/Wise/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/nt/installer/Wise/ChangeLog,v retrieving revision 1.30 retrieving revision 1.31 diff -u -p -r1.30 -r1.31 --- ChangeLog 2006/02/26 13:45:34 1.30 +++ ChangeLog 2006/03/31 17:51:35 1.31 ＠＠ -84,7 +84,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org> 1.939 +2 -1 XEmacs/xemacs/src/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/src/ChangeLog,v retrieving revision 1.938 retrieving revision 1.939 diff -u -p -r1.938 -r1.939 --- ChangeLog 2006/03/30 23:10:36 1.938 +++ ChangeLog 2006/03/31 17:51:36 1.939 ＠＠ -15903,7 +15903,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-01-31 John H. Palmieri <palmieri(a)math.washington.edu> 1.77 +2 -1 XEmacs/xemacs/tests/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/tests/ChangeLog,v retrieving revision 1.76 retrieving revision 1.77 diff -u -p -r1.76 -r1.77 --- ChangeLog 2006/02/26 13:46:10 1.76 +++ ChangeLog 2006/03/31 17:51:39 1.77 ＠＠ -384,7 +384,8 ＠＠ 2002-03-12 Ben Wing <ben(a)xemacs.org> - * The Great Mule Merge: placeholder. + * The Great Mule Merge of March 2002: + see node by that name in the Internals Manual. 2002-03-05 Stephen J. Turnbull <stephen(a)xemacs.org>

1 participants
0 comments

CVS update by stephent xemacs ... 19 years, 1 month

CVS Monitor

User: stephent Date: 06/03/31 19:50:38 Modified: xemacs CHANGES-beta Log: prepare for 21.5.26 Revision Changes Path 1.241 +45 -0 XEmacs/xemacs/CHANGES-beta Index: CHANGES-beta =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/CHANGES-beta,v retrieving revision 1.240 retrieving revision 1.241 diff -u -p -r1.240 -r1.241 --- CHANGES-beta 2006/02/26 13:10:24 1.240 +++ CHANGES-beta 2006/03/31 17:50:38 1.241 ＠＠ -1,3 +1,48 ＠＠ +to 21.5.26 "endive" + +Major Features and Backward Incompatible Changes + +-- Improve: search for package roots on Windows. -- Vin Shelton +-- Improve: support asynchronous finalization, remove explicit finalizers, and support for statistics for explicitly finalized objects. -- Marcus Crestani, Adrian Aichner +-- New: support ALSA sound on Linux. -- Jerry James + +User-Visible Bug Fixes and Minor Improvements + +-- Fix: GC cursor display in mc-alloc. -- Marcus Crestani +-- Fix: next-error.el vs. compile.el name clashes. -- Malcolm Purvis +-- Fix: restore memory usage stats (fix regexp). -- Marcus Crestani +-- Fix: synch widget-move-and-invoke, used by Gnus. -- Jerry James +-- Fix: uncomment-region in C files. -- Jerry James +-- Fix: use set-text-properties, not remove-list-of-text-properties. -- Jerry James +-- Improve: convert decode-coding-region, encode-coding-region to interactive commands. -- Stephen Turnbull +-- Improve: synch regex failure limits with GNU Emacs, avoiding asserts. -- Malcolm Purvis + +Build Infrastructure + +-- Fix: eliminate configure idioms obsolete in Autoconf 2.59. -- Jerry James, Ilya Golubev +-- Improve: merge mc-alloc features into --with-newgc. -- Marcus Crestani + +Documentation + +-- Fix: document dependence of `run-lisp' on os-utils package. -- Mike Sperber +-- Improve: move historical READMEs, etc, to internals.texi. -- Stephen Turnbull + +Lisp API + +-- Improve: remove dead API (lisp-send-defun). -- Mike Sperber + +Internal API and Implementation + +-- Fix: add missing do to RETURN_UNGCPRO_EXIT_PROFILING. -- Jerry James +-- Fix: avoid malloc in vdb signal handler. -- Marcus Crestani +-- Fix: broken use of memset in vdb_install_signal_handler. -- Mike Fabian +-- Fix: eliminate bogus pointer to nowhere. -- Stephen Turnbull, Jerry James +-- Fix: malloc size in Dynarr_realloc. -- Marcus Crestani +-- Improve: add internal API to zero uninitialized string. -- Marcus Crestani +-- Improve: dynamic array cleanup, remove duplicate code. -- Marcus Crestani +-- Improve: handle memory shortage in mc-alloc properly. -- Marcus Crestani +-- Improve: mc-alloc APIs now return number of pages processed. -- Marcus Crestani + to 21.5.25 "eggplant" Major Features and Backward Incompatible Changes

1 participants
0 comments

CVS update by crestani xemacs/lisp ... 19 years, 1 month

CVS Monitor

User: crestani Date: 06/03/31 10:39:12 Modified: xemacs/lisp ChangeLog diagnose.el Log: * diagnose.el (show-mc-alloc-memory-usage): Rename buffer to "mc-alloc memory usage" to avoid name clash with show-memory-usage. Revision Changes Path 1.732 +6 -0 XEmacs/xemacs/lisp/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lisp/ChangeLog,v retrieving revision 1.731 retrieving revision 1.732 diff -u -p -r1.731 -r1.732 --- ChangeLog 2006/03/28 17:43:43 1.731 +++ ChangeLog 2006/03/31 08:39:09 1.732 ＠＠ -1,3 +1,9 ＠＠ +2006-03-31 Marcus Crestani <marcus.crestani(a)ub.uni-tuebingen.de> + + * diagnose.el (show-mc-alloc-memory-usage): Rename buffer to + "mc-alloc memory usage" to avoid name clash with + show-memory-usage. + 2006-03-26 Marcus Crestani <crestani(a)xemacs.org> * diagnose.el (show-gc-stats): Adjust format string, remove 1.10 +1 -1 XEmacs/xemacs/lisp/diagnose.el Index: diagnose.el =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/lisp/diagnose.el,v retrieving revision 1.9 retrieving revision 1.10 diff -u -p -r1.9 -r1.10 --- diagnose.el 2006/03/28 17:43:45 1.9 +++ diagnose.el 2006/03/31 08:39:10 1.10 ＠＠ -252,7 +252,7 ＠＠ (free-plhs (fourth stats)) (globals (fifth stats)) (mc-malloced-bytes (sixth stats))) - (with-output-to-temp-buffer "*memory usage*" + (with-output-to-temp-buffer "*mc-alloc memory usage*" (flet ((print-used-plhs (text plhs) (let ((sum-n-pages 0) (sum-used-n-cells 0)

1 participants
0 comments

CVS update by vins xemacs/src ... 19 years, 1 month

CVS Monitor

User: vins Date: 06/03/31 03:29:06 Branch: xemacs/src release-21-4 Modified: xemacs/src ChangeLog regex.c Log: Bump INIT_FAILURE_ALLOC and re_max_failures to the current values found in GNU Emacs. Revision Changes Path 1.290.2.109 +5 -0 XEmacs/xemacs/src/ChangeLog Index: ChangeLog =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/src/ChangeLog,v retrieving revision 1.290.2.108 retrieving revision 1.290.2.109 diff -u -p -r1.290.2.108 -r1.290.2.109 --- ChangeLog 2006/03/21 03:12:29 1.290.2.108 +++ ChangeLog 2006/03/31 01:28:57 1.290.2.109 ＠＠ -1,3 +1,8 ＠＠ +2006-03-21 Malcolm Purvis <malcolmp(a)xemacs.org> + + * regex.c: Bump INIT_FAILURE_ALLOC and re_max_failures to the + current values found in GNU Emacs. + 2006-03-17 Vin Shelton <acs(a)xemacs.org> * dialog-msw.c (handle_directory_dialog_box): Don't declare 1.25.2.14 +3 -3 XEmacs/xemacs/src/regex.c Index: regex.c =================================================================== RCS file: /pack/xemacscvs/XEmacs/xemacs/src/regex.c,v retrieving revision 1.25.2.13 retrieving revision 1.25.2.14 diff -u -p -r1.25.2.13 -r1.25.2.14 --- regex.c 2005/01/31 02:55:30 1.25.2.13 +++ regex.c 2006/03/31 01:29:00 1.25.2.14 ＠＠ -1145,7 +1145,7 ＠＠ static const char *re_error_msgid[] = when matching. If this number is exceeded, we allocate more space, so it is not a hard limit. */ #ifndef INIT_FAILURE_ALLOC -#define INIT_FAILURE_ALLOC 5 +#define INIT_FAILURE_ALLOC 20 #endif /* Roughly the maximum number of failure points on the stack. Would be ＠＠ -1155,9 +1155,9 ＠＠ static const char *re_error_msgid[] = #if defined (MATCH_MAY_ALLOCATE) || defined (REGEX_MALLOC) /* 4400 was enough to cause a crash on Alpha OSF/1, whose default stack limit is 2mb. */ -int re_max_failures = 20000; +int re_max_failures = 40000; #else -int re_max_failures = 2000; +int re_max_failures = 4000; #endif union fail_stack_elt

1 participants
0 comments

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

xemacs-cvs March 2006