9:10 p.m.
I checked our gud.el. I think it must be pretty old, judging from
this message. We don't have any pdb support. The copyright says
1993, if that means anything.
4:04 a.m.
nbecker(a)fred.net writes:
I checked our gud.el. I think it must be pretty old, judging from
this message. We don't have any pdb support. The copyright says
1993, if that means anything.
I have gud.el based on Emacs 20.5 or 20.6. I haven't posted
it because I added only little hacks to make it work and
didn't look source code carefully. Is there anyone who
wants to work on it?
You probably have to remove speedbar code from gud.el
because we have sb-gud.el. Perhaps you want to add toolbar
support. There might be other bugs left since I only use
gdb. It would be really nice if someone can take over the
porting.
--
Yoshiki Hayashi
8:01 a.m.
New subject: XEmacs AUC Tex package: "@AUCDIR" in load-path
The default tex-site.el from the AUC TeX package does a number of
weird things, including consing "＠AUCDIR" on the front of load-path.
It also duplicates a bunch of autoloads that XEmacs normally does via
auto-autoloads.el.
On the other hand, I can't really dispense with `(require 'tex-site)',
since AUC TeX (properly) IMHO defers to tex-mode.el in the core for
tex-mode and latex-mode.
What I propose doing is wrapping those parts of tex-site.el that don't
need to be done for a properly installed XEmacs package in
(unless (featurep 'auctex-autoloads) ...)
This should be sufficiently XEmacs-specific to not mess up FSF users.
However, I don't know AUC TeX internals well and don't have time right
now to track down any possible dependencies there.
Any takers?
Possible patch attached:
Index: wp/auctex/tex-site.el
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-packages/wp/auctex/tex-site.el,v
retrieving revision 1.3
diff -u -r1.3 tex-site.el
--- tex-site.el 2000/01/19 12:32:53 1.3
+++ tex-site.el 2000/12/13 08:02:16
＠＠ -57,35 +57,44 ＠＠
;; Copy variables you need to change from the start of `tex.el' and
;; insert them here.
-(defvar TeX-lisp-directory "＠AUCDIR"
- "*The directory where the AUC TeX lisp files are located.")
+;; Uncomment and replace ＠AUCDIR with the path to AUC TeX.
+;; You should not need to do this for an installed XEmacs AUC TeX package.
+;; If you can't figure out how to do without it, please report a bug.
+;(defvar TeX-lisp-directory "＠AUCDIR"
+; "*The directory where the AUC TeX lisp files are located.")
;;; Autoloads:
-(or (assoc TeX-lisp-directory (mapcar 'list load-path)) ;No `member' yet.
- (assoc (substring TeX-lisp-directory 0 -1) ;Without trailing slash.
- (mapcar 'list load-path))
- (setq load-path (cons TeX-lisp-directory load-path)))
+(unless (featurep 'auctex-autoloads)
+ ;; auto-autoloaded by XEmacs AUC TeX package
+ (or (assoc TeX-lisp-directory (mapcar 'list load-path)) ;No `member' yet.
+ (assoc (substring TeX-lisp-directory 0 -1) ;Without trailing slash.
+ (mapcar 'list load-path))
+ (setq load-path (cons TeX-lisp-directory load-path)))
+ (autoload 'BibTeX-auto-store "latex" no-doc t)
+
+ (autoload 'ams-tex-mode "tex" no-doc t)
+ (autoload 'TeX-auto-generate "tex" no-doc t)
+ (autoload 'TeX-auto-generate-global "tex" no-doc t)
+ (autoload 'TeX-insert-quote "tex" no-doc t)
+ (autoload 'TeX-submit-bug-report "tex" no-doc t)
+ (autoload 'japanese-plain-tex-mode "tex-jp" no-doc t)
+ (autoload 'japanese-latex-mode "tex-jp" no-doc t))
+
;; This hook will store bibitems when you save a BibTeX buffer.
(defvar bibtex-mode-hook nil)
(or (memq 'BibTeX-auto-store bibtex-mode-hook) ;No `add-hook' yet.
(setq bibtex-mode-hook (cons 'BibTeX-auto-store bibtex-mode-hook)))
-
-(autoload 'BibTeX-auto-store "latex" no-doc t)
+;; These are _not_ autoloaded by the XEmacs AUC TeX package because they
+;; conflict with the definitions provided by the tex-mode.el in the core.
(autoload 'tex-mode "tex" no-doc t)
(autoload 'plain-tex-mode "tex" no-doc t)
-(autoload 'ams-tex-mode "tex" no-doc t)
-(autoload 'TeX-auto-generate "tex" no-doc t)
-(autoload 'TeX-auto-generate-global "tex" no-doc t)
-(autoload 'TeX-insert-quote "tex" no-doc t)
-(autoload 'TeX-submit-bug-report "tex" no-doc t)
-(autoload 'japanese-plain-tex-mode "tex-jp" no-doc t)
-(autoload 'japanese-latex-mode "tex-jp" no-doc t)
+(autoload 'latex-mode "latex" no-doc t)
+
(autoload 'japanese-slitex-mode "tex-jp" no-doc t)
(autoload 'texinfo-mode "tex-info" no-doc t)
-(autoload 'latex-mode "latex" no-doc t)
(provide 'tex-site)
--
University of Tsukuba Tennodai 1-1-1 Tsukuba 305-8573 JAPAN
Institute of Policy and Planning Sciences Tel/fax: +81 (298) 53-5091
_________________ _________________ _________________ _________________
What are those straight lines for? "XEmacs rules."
3:05 p.m.
New subject: XEmacs AUC Tex package: "@AUCDIR" in load-path
"Stephen J. Turnbull" <turnbull(a)sk.tsukuba.ac.jp> writes:
The default tex-site.el from the AUC TeX package does a number of
weird things, including consing "＠AUCDIR" on the front of load-path.
The AUC TeX Makefile replaces it with the installation directory.
Given that both Emacs and XEmacs these days search directories
recursively, maybe this is no longer needed.
It also duplicates a bunch of autoloads that XEmacs normally does
via
auto-autoloads.el.
Emacs doesn't. Are the XEmacs autoloads package specific? If not,
they can't be autogenerated because of conflicts with the standard TeX
mode.
On the other hand, I can't really dispense with `(require
'tex-site)',
since AUC TeX (properly) IMHO defers to tex-mode.el in the core for
tex-mode and latex-mode.
Historical note: tex-site.el is older than XEmacs (and Lucid Emacs).
Its purpose was to give people a place to add site specific
customizations that that should survive upgrading AUC TeX. For the
same reason, it doesn't install (using the makefile) in the same
directory as the rest of the files.
4:10 p.m.
New subject: XEmacs AUC Tex package: "@AUCDIR" in load-path
Per Abrahamsen <abraham(a)dina.kvl.dk> writes:
> It also duplicates a bunch of autoloads that XEmacs normally
does
> via auto-autoloads.el.
Emacs doesn't. Are the XEmacs autoloads package specific?
They are. XEmacs loads all the autoloads on startup.
3:23 a.m.
New subject: XEmacs AUC Tex package: "@AUCDIR" in load-path
>>>> "Per" == Per Abrahamsen
<abraham(a)dina.kvl.dk> writes:
Per> "Stephen J. Turnbull" <turnbull(a)sk.tsukuba.ac.jp> writes:
> The default tex-site.el from the AUC TeX package does a number
> of weird things, including consing "＠AUCDIR" on the front of
> load-path.
Per> The AUC TeX Makefile replaces it with the installation
Per> directory. Given that both Emacs and XEmacs these days
Per> search directories recursively, maybe this is no longer
Per> needed.
On XEmacs, it is not needed.
> It also duplicates a bunch of autoloads that XEmacs normally
> does via auto-autoloads.el.
Per> Emacs doesn't. Are the XEmacs autoloads package specific?
Per> If not, they can't be autogenerated because of conflicts with
Per> the standard TeX mode.
Yes, they are. There is no conflict as I wrote the patch; this is
intentionally done conditional on (featurep 'xemacs). Probably that
the other autoloads should be moved into auc-tex/auto-autoloads.el for
XEmacs, but I don't know enough to be sure.
tex-site.el may still be a good idea, just like the various package
specific init files (.vm, .sc, ...). But this does conflict with the
idea of trying to do everything via Custom.
--
University of Tsukuba Tennodai 1-1-1 Tsukuba 305-8573 JAPAN
Institute of Policy and Planning Sciences Tel/fax: +81 (298) 53-5091
_________________ _________________ _________________ _________________
What are those straight lines for? "XEmacs rules."
11:01 a.m.
New subject: XEmacs AUC Tex package: "@AUCDIR" in load-path
"Stephen J. Turnbull" <turnbull(a)sk.tsukuba.ac.jp> writes:
Yes, they are. There is no conflict as I wrote the patch; this is
intentionally done conditional on (featurep 'xemacs). Probably that
the other autoloads should be moved into auc-tex/auto-autoloads.el for
XEmacs, but I don't know enough to be sure.
I will need some more definite statement from an XEmacs person before
I apply the patch.
tex-site.el may still be a good idea, just like the various package
specific init files (.vm, .sc, ...). But this does conflict with the
idea of trying to do everything via Custom.
tex-site.el has nothing to do with the files you mention, these files
are per user, tex-site.el is per site. Customize still doesn't offer
a good way to specify site specific customizations, and won't until
Jans work is finished.
8534
days inactive
8548
days old
6 comments
5 participants
participants (5)
-
Hrvoje Niksic -
Neal D. Becker -
Per Abrahamsen -
Stephen J. Turnbull -
Yoshiki Hayashi