4:39 p.m.
Paul INDELICATO wrote:
Thank you all for looking into this.
1) I created the aix5.h and aix5-1.h headers according to Valdis
Kletnieks mail (but i had to replace the <> by "" in the includes
otherwise the include files were not found. I suppose one has to change
something else so that configure would put the correct include in config.h
>% cat > s/aix5.h
>#define AIX5
>#include <aix4-2.h>
>^D
>
>% cat > s/aix5-1.h
>#define AIX5_1
>#include <aix5.h>
>^D
Hi Paul,
I've tried to reproduce this on my AIX 5.1 box with also the VisualAge
Compiler V6.0. Using the header files mentioned above and an additional
line in configure for aix5, building 21.4.12 as well as 21.5.10 went
fine (with and without the portable dumper). Apart from the fact that I
also got a bunch of warnings telling me that _ALL_SOURCE has been
redefined (only for 21.4.12).
Both versions run ok for me, so I don't know why it doesn't work for you
on AIX 5.1. Are you sure that all the latest OS patches have been
applied? Have you already tried running "lppchk" to check for any
inconsistencies in the installation?
Regards,
Markus
--
Markus Alt
IBM Lab Boeblingen, Germany
altmark(a)de.ibm.com
5:36 p.m.
New subject: Xemacs 21.4.11 does not configure correctly and crashes at
Markus Alt wrote:
Hi Paul,
I've tried to reproduce this on my AIX 5.1 box with also the VisualAge
Compiler V6.0. Using the header files mentioned above and an additional
line in configure for aix5, building 21.4.12 as well as 21.5.10 went
fine (with and without the portable dumper). Apart from the fact that I
also got a bunch of warnings telling me that _ALL_SOURCE has been
redefined (only for 21.4.12).
Both versions run ok for me, so I don't know why it doesn't work for you
on AIX 5.1. Are you sure that all the latest OS patches have been
applied? Have you already tried running "lppchk" to check for any
inconsistencies in the installation?
Regards,
Markus
Hi Markus,
I could not do it right away, but I finaly managed to download 21.4.12,
change configure by adding:
*-*-aix5.0 ) opsys=aix5 ;;
*-*-aix5.1 ) opsys=aix5-1 ;;
and adding the two file "aix5.h" and "aix5-1.h" in src/s
I checked that oslevel returns 5100-3, the latest maintenance package. I
have added fixes from the IBM site regularly using the "new this month"
feature. VIsual Age C is at the latest level (6.0.0.1)
llpchk -v does not return anything. The compilations goes as before,
with the same messages about _ALL_SOURCE.... and xemacs still crashes
with the same problem I reported. It works if one is not in X11 mode
though. I have to say the last time I udpated in december (no fixes
appeared in January that concern the system) mozilla 1.2.1 (binary
downloaded from mozzila.org) which worked fine before core dump as well.
I never had this kind of problem with AIX before (at least not since I
started using 4.1...)
I may just have missed a few fixes. The IBM web site lacks a "check my
system and download all the latest fixes which are good for it" function....
I have not tried 21.5.10 yet....
Regards,
--
Paul Indelicato,
Directeur de Recherche au CNRS
Responsable du DEA Physique Experimentale des Atomes et Molécules
Laboratoire Kastler-Brossel, Case 74
Ecole Normale Supérieure et Université Pierre et Marie Curie
4 place Jussieu,
F-75252 paris Cedex 05
France
E-mail: paul(a)spectro.jussieu.fr
Phone: +33-1 44 27 43 96
Fax: +33-1 44 27 38 45
WEB: http://dirac.spectro.jussieu.fr
DEA WEB: http://atom.spectro.jussieu.fr
6:19 p.m.
New subject: Xemacs 21.4.11 does not configure correctly and crashes at
Hi Markus,
when trying to compile 21.5.10 I get a problem with make that I had
already under 4.3.3, so that I had given up on 21.5:
cd ./lib-src && make CC='cc_r' CFLAGS='-O -qarch=604
-qtune=604' LDFLAGS='' CPPFLAGS='' all
Target "all" is up to date.
cd ./lwlib && make CC='cc_r' CFLAGS='-O -qarch=604
-qtune=604'
LDFLAGS='' CPPFLAGS='' all
Target "all" is up to date.
cd ./src && make CC='cc_r' CFLAGS='-O -qarch=604
-qtune=604'
LDFLAGS='' CPPFLAGS='' all
"Makefile", line 45: make: 1254-055 Dependency line needs colon or
double colon operator.
"Makefile", line 46: make: 1254-055 Dependency line needs colon or
double colon operator.
"Makefile", line 47: make: 1254-055 Dependency line needs colon or
double colon operator.
"Makefile", line 48: make: 1254-055 Dependency line needs colon or
double colon operator.
"Makefile", line 52: make: 1254-055 Dependency line needs colon or
double colon operator.
make: 1254-058 Fatal errors encountered -- cannot continue.
make: 1254-004 The error code from the last command is 2.
Have you been using gnumake?
Regards,
--
Paul Indelicato,
Directeur de Recherche au CNRS
Responsable du DEA Physique Experimentale des Atomes et Molécules
Laboratoire Kastler-Brossel, Case 74
Ecole Normale Supérieure et Université Pierre et Marie Curie
4 place Jussieu,
F-75252 paris Cedex 05
France
E-mail: paul(a)spectro.jussieu.fr
Phone: +33-1 44 27 43 96
Fax: +33-1 44 27 38 45
WEB: http://dirac.spectro.jussieu.fr
DEA WEB: http://atom.spectro.jussieu.fr
6:52 p.m.
New subject: Xemacs 21.4.11 does not configure correctly and crashes at
Markus Alt wrote:
I've tried to reproduce this on my AIX 5.1 box with also the
VisualAge
Compiler V6.0. Using the header files mentioned above and an additional
line in configure for aix5, building 21.4.12 as well as 21.5.10 went
fine (with and without the portable dumper). Apart from the fact that I
also got a bunch of warnings telling me that _ALL_SOURCE has been
redefined (only for 21.4.12).
I have been able to continue compiling using gmake, but I had to change
keymap.c at line 4014:
#ifdef USE_KKCC
memcpy ((void *)new, (const void *)c->keys_so_far,
c->keys_so_far_total_size * sizeof (Lisp_Key_Data));
#else /* not USE_KKCC */
memcpy ((void *)new, (const void *)c->keys_so_far,
c->keys_so_far_total_size * sizeof (struct key_data));
#endif /* not USE_KKCC */
in place of
memcpy ((void *)new, (const void *)c->keys_so_far,
#ifdef USE_KKCC
c->keys_so_far_total_size * sizeof (Lisp_Key_Data));
#else /* not USE_KKCC */
c->keys_so_far_total_size * sizeof (struct key_data));
#endif /* not USE_KKCC */
which vac.C did not like (# is not a C source character was the message...)
Once that is done the compile is OK, but I run into the same problem to
create a frame on X11:
Lisp backtrace follows:
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
# (unwind-protect ...)
# bind (frame-being-created)
make-frame(nil #<x-device on "localhost:14.0" 0x21e9>)
frame-initialize()
# bind (debugger debug-on-error command-line-args-left)
command-line()
# (condition-case ... . ((t (byte-code " Â" [error-data data nil]
1))))
# bind (error-data)
normal-top-level()
# (condition-case ... . error)
# (catch top-level ...)
IOT/Abort trap(coredump)
--
Paul Indelicato,
Directeur de Recherche au CNRS
Responsable du DEA Physique Experimentale des Atomes et Molécules
Laboratoire Kastler-Brossel, Case 74
Ecole Normale Supérieure et Université Pierre et Marie Curie
4 place Jussieu,
F-75252 paris Cedex 05
France
E-mail: paul(a)spectro.jussieu.fr
Phone: +33-1 44 27 43 96
Fax: +33-1 44 27 38 45
WEB: http://dirac.spectro.jussieu.fr
DEA WEB: http://atom.spectro.jussieu.fr
7972
days inactive
7976
days old
3 comments
2 participants
participants (2)
-
Markus Alt -
Paul INDELICATO