Marcus Thiessel writes: What do we gain by doing this?

mt> I would like to add hppa2.0{w,n} to the set of supported mt> architectures. According to config.sub there to possible pattern to mt> report to the user: mt> # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM mt> # or in some cases, the newer four-part form: mt> # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM I'd like to maintain config.guess by simply copying the `official' one from autoconf, without any modifications. That would imply a veto of your patch. Here's the current diffs between ours and the official ones. They seem to have hppa2 support. I propose we try upgrading to the new config.guess and config.sub and see what breaks. Perhaps you could try this yourself? If you report success, then we do the upgrade. You might have to tweak configure.in as well. ObURL: http://sourceware.cygnus.com/autoconf/ --- /xemacs/ws/dev/config.sub Sat Dec 5 08:54:03 1998 +++ ./config.sub Wed Sep 22 02:25:12 1999 ＠＠ -1,6 +1,6 ＠＠ #! /bin/sh # Configuration validation subroutine script, version 1.1. -# Copyright (C) 1991, 92-97, 1998 Free Software Foundation, Inc. +# Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc. # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. ＠＠ -98,11 +98,21 ＠＠ os= basic_machine=$1 ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; -hiux*) os=-hiuxwe2 ;; -sco5) - os=sco3.2v5 + os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) ＠＠ -121,6 +131,9 ＠＠ os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ＠＠ -143,22 +156,33 ＠＠ -psos*) os=-psos ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. - tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ + tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ - | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \ - | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \ - | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \ - | mips64 | mipsel | mips64el | mips64orion | mips64orionel \ - | mipstx39 | mipstx39el \ - | sparc | sparclet | sparclite | sparc64 | v850) + | 580 | i960 | h8300 \ + | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \ + | alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \ + | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \ + | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \ + | mips64orion | mips64orionel | mipstx39 | mipstx39el \ + | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \ + | mips64vr5000 | miprs64vr5000el | mcore \ + | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \ + | thumb | d10v | fr30) basic_machine=$basic_machine-unknown ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl) + ;; + # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. ＠＠ -171,27 +195,45 ＠＠ exit 1 ;; # Recognize the basic CPU types with company name. - vax-* | tahoe-* | i[34567]86-* | i860-* | m32r-* | m68k-* | m68000-* \ + # FIXME: clean up the formatting here. + vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ - | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \ - | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \ - | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \ - | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \ + | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \ + | xmp-* | ymp-* \ + | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \ + | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \ + | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \ + | clipper-* | orion-* \ | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ - | sparc64-* | mips64-* | mipsel-* \ - | mips64el-* | mips64orion-* | mips64orionel-* \ - | mipstx39-* | mipstx39el-* \ - | f301-*) + | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \ + | mips64el-* | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \ + | mipstx39-* | mipstx39el-* | mcore-* \ + | f301-* | armv*-* | t3e-* \ + | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \ + | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* ) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; alliant | fx80) basic_machine=fx80-alliant ;; ＠＠ -221,6 +263,10 ＠＠ basic_machine=m68k-apollo os=-sysv ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; aux) basic_machine=m68k-apple os=-aux ＠＠ -297,6 +343,10 ＠＠ encore | umax | mmax) basic_machine=ns32k-encore ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; fx2800) basic_machine=i860-alliant ;; ＠＠ -315,6 +365,14 ＠＠ basic_machine=h8300-hitachi os=-hms ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; harris) basic_machine=m88k-harris os=-sysv3 ＠＠ -330,13 +388,30 ＠＠ basic_machine=m68k-hp os=-hpux ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; - hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) ＠＠ -345,9 +420,16 ＠＠ hppa-next) os=-nextstep3 ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; i370-ibm* | ibm*) basic_machine=i370-ibm - os=-mvs ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i[34567]86v32) ＠＠ -366,6 +448,25 ＠＠ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + i386-go32 | go32) + basic_machine=i386-unknown + os=-go32 + ;; + i386-mingw32 | mingw32) + basic_machine=i386-unknown + os=-mingw32 + ;; + i386-qnx | qnx) + basic_machine=i386-qnx + ;; iris | iris4d) basic_machine=mips-sgi case $os in ＠＠ -394,6 +495,10 ＠＠ miniframe) basic_machine=m68000-convergent ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; mipsel*-linux*) basic_machine=mipsel-unknown os=-linux-gnu ＠＠ -408,10 +513,30 ＠＠ mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + msdos) + basic_machine=i386-unknown + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ＠＠ -424,6 +549,10 ＠＠ basic_machine=mips-sony os=-newsos ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; next | m*-next ) basic_machine=m68k-next case $os in ＠＠ -449,9 +578,25 ＠＠ basic_machine=i960-intel os=-nindy ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; np1) basic_machine=np1-gould ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ＠＠ -469,19 +614,19 ＠＠ pc532 | pc532-*) basic_machine=ns32k-pc532 ;; - pentium | p5 | k5 | nexen) + pentium | p5 | k5 | k6 | nexen) basic_machine=i586-pc ;; - pentiumpro | p6 | k6 | 6x86) + pentiumpro | p6 | 6x86) basic_machine=i686-pc ;; pentiumii | pentium2) basic_machine=i786-pc ;; - pentium-* | p5-* | k5-* | nexen-*) + pentium-* | p5-* | k5-* | k6-* | nexen-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - pentiumpro-* | p6-* | k6-* | 6x86-*) + pentiumpro-* | p6-* | 6x86-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-*) ＠＠ -505,12 +650,20 ＠＠ ps2) basic_machine=i386-ibm ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; sequent) basic_machine=i386-sequent ;; ＠＠ -518,6 +671,10 ＠＠ basic_machine=sh-hitachi os=-hms ;; + sparclite-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; sps7) basic_machine=m68k-bull os=-sysv2 ＠＠ -525,6 +682,13 ＠＠ spur) basic_machine=spur-unknown ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; sun2) basic_machine=m68000-sun ;; ＠＠ -569,6 +733,10 ＠＠ basic_machine=i386-sequent os=-dynix ;; + t3e) + basic_machine=t3e-cray + os=-unicos + ;; tx39) basic_machine=mipstx39-unknown ;; ＠＠ -586,6 +754,10 ＠＠ basic_machine=a29k-nyu os=-sym1 ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; vaxv) basic_machine=vax-dec os=-sysv ＠＠ -609,6 +781,14 ＠＠ basic_machine=a29k-wrs os=-vxworks ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; xmp) basic_machine=xmp-cray os=-unicos ＠＠ -616,6 +796,10 ＠＠ xps | xps100) basic_machine=xps100-honeywell ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; none) basic_machine=none-none os=-none ＠＠ -623,6 +807,15 ＠＠ # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; mips) if [ x$os = x-linux-gnu ]; then basic_machine=mips-unknown ＠＠ -645,7 +838,7 ＠＠ we32k) basic_machine=we32k-att ;; - sparc) + sparc | sparcv9) basic_machine=sparc-sun ;; cydra) ＠＠ -657,6 +850,16 ＠＠ orion105) basic_machine=clipper-highlevel ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + c4x*) + basic_machine=c4x-none + os=-coff + ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ＠＠ -710,13 +913,21 ＠＠ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos*) + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*) # Remember, each alternative MUST END IN *, to match a version number. ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; ＠＠ -726,6 +937,9 ＠＠ -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; + -opened*) + os=-openedition + ;; -osfrose*) os=-osfrose ;; ＠＠ -741,6 +955,9 ＠＠ -acis*) os=-aos ;; + -386bsd) + os=-bsd + ;; -ctix* | -uts*) os=-sysv ;; ＠＠ -760,6 +977,9 ＠＠ -oss*) os=-sysv3 ;; + -qnx) + os=-qnx4 + ;; -svr4) os=-sysv4 ;; ＠＠ -772,9 +992,18 ＠＠ # This must come after -sysvr4. -sysv*) ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; -xenix) os=-xenix ;; + -*mint | -*MiNT) + os=-mint + ;; -none) ;; *) ＠＠ -800,6 +1029,9 ＠＠ *-acorn) os=-riscix1.2 ;; + arm*-rebel) + os=-linux + ;; arm*-semi) os=-aout ;; ＠＠ -821,6 +1053,15 ＠＠ # default. # os=-sunos4 ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; ＠＠ -833,6 +1074,15 ＠＠ *-ibm) os=-aix ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; *-hp) os=-hpux ;; ＠＠ -896,6 +1146,18 ＠＠ f301-fujitsu) os=-uxpv ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; *) os=-none ;; ＠＠ -917,9 +1179,15 ＠＠ -aix*) vendor=ibm ;; + -beos*) + vendor=be + ;; -hpux*) vendor=hp ;; + -mpeix*) + vendor=hp + ;; -hiux*) vendor=hitachi ;; ＠＠ -935,7 +1203,7 ＠＠ -genix*) vendor=ns ;; - -mvs*) + -mvs* | -opened*) vendor=ibm ;; -ptx*) ＠＠ -946,6 +1214,15 ＠＠ ;; -aux*) vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -*MiNT) + vendor=atari ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` --- /xemacs/ws/dev/config.guess Tue Jul 6 00:32:59 1999 +++ ./config.guess Sat Oct 30 18:16:52 1999 ＠＠ -1,6 +1,7 ＠＠ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright (C) 1992, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 +# Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by ＠＠ -23,6 +24,7 ＠＠ # Written by Per Bothner <bothner(a)cygnus.com&gt;. # The master version of this file is at the FSF in /home/gd/gnu/lib. +# Please send patches to <autoconf-patches(a)gnu.org&gt;. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and ＠＠ -35,6 +37,20 ＠＠ # (but try to keep the structure clean). # +# Use $HOST_CC if defined. $CC may point to a cross-compiler +if test x"$CC_FOR_BUILD" = x; then + if test x"$HOST_CC" != x; then + CC_FOR_BUILD="$HOST_CC" + else + if test x"$CC" != x; then + CC_FOR_BUILD="$CC" + else + CC_FOR_BUILD=cc + fi + fi +fi + + # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi(a)noc.rutgers.edu 8/24/94.) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then ＠＠ -46,7 +62,8 ＠＠ UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown -trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15 +dummy=dummy-$$ +trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15 # Note: order is significant - the case branches are not exclusive. ＠＠ -59,7 +76,7 ＠＠ # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - cat <<EOF >dummy.s + cat <<EOF >$dummy.s .globl main .ent main main: ＠＠ -76,9 +93,9 ＠＠ ret \$31,(\$26),1 .end main EOF - ${CC-cc} dummy.s -o dummy 2>/dev/null + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then - ./dummy + ./$dummy case "$?" in 7) UNAME_MACHINE="alpha" ＠＠ -97,8 +114,14 ＠＠ ;; esac fi - rm -f dummy.s dummy - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]` + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 ＠＠ -133,6 +156,9 ＠＠ wgrisc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; ＠＠ -142,7 +168,7 ＠＠ SR2?01:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; - Pyramid*:OSx*:*:*|MIS*:OSx*:*:*|MIS*:SMP_DC-OSx*:*:*) + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee(a)wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 ＠＠ -150,7 +176,7 ＠＠ echo pyramid-pyramid-bsd fi exit 0 ;; - NILE:*:*:dcosx) + NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; sun4H:SunOS:5.*:*) ＠＠ -201,6 +227,32 ＠＠ atari*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; sun3*:NetBSD:*:*) echo m68k-sun-netbsd${UNAME_RELEASE} exit 0 ;; ＠＠ -234,12 +286,16 ＠＠ VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; - 2020:CLIX:*:*) + 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) - sed 's/^ //' << EOF >dummy.c - int main (argc, argv) int argc; char **argv; { + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); ＠＠ -254,10 +310,10 ＠＠ exit (-1); } EOF - ${CC-cc} dummy.c -o dummy \ - && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy + $CC_FOR_BUILD $dummy.c -o $dummy \ + && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Night_Hawk:Power_UNIX:*:*) ＠＠ -275,15 +331,18 ＠＠ AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ - -o ${TARGET_BINARY_INTERFACE}x = x ] ; then + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then echo m88k-dg-dgux${UNAME_RELEASE} - else + else echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} fi - else echo i586-dg-dgux${UNAME_RELEASE} - fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 ＠＠ -309,7 +368,7 ＠＠ exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - sed 's/^ //' << EOF >dummy.c + sed 's/^ //' << EOF >$dummy.c #include <sys/systemcfg.h> main() ＠＠ -320,8 +379,8 ＠＠ exit(0); } EOF - ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 ＠＠ -369,24 +428,24 ＠＠ 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) - sed 's/^ //' << EOF >dummy.c + sed 's/^ //' << EOF >$dummy.c #include <stdlib.h> #include <unistd.h> - + int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); - #endif + #endif long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) + + switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: + case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) - switch (bits) + switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; ＠＠ -394,20 +453,20 ＠＠ } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; - #endif + #endif default: puts ("hppa1.0"); break; } exit (0); } EOF - ${CC-cc} dummy.c -o dummy && HP_ARCH=`./dummy` - rm -f dummy.c dummy + (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` + rm -f $dummy.c $dummy esac HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) - sed 's/^ //' << EOF >dummy.c + sed 's/^ //' << EOF >$dummy.c #include <unistd.h> int main () ＠＠ -432,8 +491,8 ＠＠ exit (0); } EOF - ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) ＠＠ -442,6 +501,9 ＠＠ 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; + *9??*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; ＠＠ -458,6 +520,9 ＠＠ parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; + hppa*:OpenBSD:*:*) + echo hppa-unknown-openbsd + exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; ＠＠ -490,11 +555,14 ＠＠ CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} exit 0 ;; + CRAY*T3E:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} + exit 0 ;; CRAY-2:*:*:*) echo cray2-cray-unicos exit 0 ;; F300:UNIX_System_V:*:*) - FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; ＠＠ -507,29 +575,47 ＠＠ hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; + i?86:BSD/386:*:* | i?86:BSD/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit 0 ;; - i?86:BSD/386:*:* | *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*) + if test -x /usr/bin/objformat; then + if test "elf" = "`/usr/bin/objformat`"; then + echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'` + exit 0 + fi + fi echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit 0 ;; *:NetBSD:*:*) - echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'` exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` exit 0 ;; i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin32 + echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i386-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin32 + echo powerpcle-unknown-cygwin exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ＠＠ -538,15 +624,11 ＠＠ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; *:Linux:*:*) - # uname on the ARM produces all sorts of strangeness, and we need to - # filter it out. - case "$UNAME_MACHINE" in - arm* | sa110*) UNAME_MACHINE="arm" ;; - esac # The BFD linker knows what the default object file format is, so - # first see if it will tell us. - ld_help_string=`ld --help 2>&1` + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + ld_help_string=`cd /; ld --help 2>&1` ld_supported_emulations=`echo $ld_help_string \ | sed -ne '/supported emulations:/!d s/[ ][ ]*/ /g ＠＠ -554,16 +636,74 ＠＠ s/ .*// p'` case "$ld_supported_emulations" in - i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;; - i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;; - sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; - armlinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; - m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; - elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;; + *ia64) + echo "${UNAME_MACHINE}-unknown-linux" + exit 0 + ;; + i?86linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 + ;; + i?86coff) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 + ;; + sparclinux) + echo "${UNAME_MACHINE}-unknown-linux-gnuaout" + exit 0 + ;; + armlinux) + echo "${UNAME_MACHINE}-unknown-linux-gnuaout" + exit 0 + ;; + elf32arm*) + echo "${UNAME_MACHINE}-unknown-linux-gnu" + exit 0 + ;; + armelf_linux*) + echo "${UNAME_MACHINE}-unknown-linux-gnu" + exit 0 + ;; + m68klinux) + echo "${UNAME_MACHINE}-unknown-linux-gnuaout" + exit 0 + ;; + elf32ppc) + # Determine Lib Version + cat >$dummy.c <<EOF +#include <features.h> +#if defined(__GLIBC__) +extern char __libc_version[]; +extern char __libc_release[]; +#endif +main(argc, argv) + int argc; + char *argv[]; +{ +#if defined(__GLIBC__) + printf("%s %s\n", __libc_version, __libc_release); +#else + printf("unkown\n"); +#endif + return 0; +} +EOF + LIBC="" + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null + if test "$?" = 0 ; then + ./$dummy | grep 1\.99 > /dev/null + if test "$?" = 0 ; then + LIBC="libc1" + fi + fi + rm -f $dummy.c $dummy + echo powerpc-unknown-linux-gnu${LIBC} + exit 0 + ;; esac if test "${UNAME_MACHINE}" = "alpha" ; then - sed 's/^ //' <<EOF >dummy.s + sed 's/^ //' <<EOF >$dummy.s .globl main .ent main main: ＠＠ -581,9 +721,9 ＠＠ .end main EOF LIBC="" - ${CC-cc} dummy.s -o dummy 2>/dev/null + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then - ./dummy + ./$dummy case "$?" in 7) UNAME_MACHINE="alpha" ＠＠ -600,22 +740,23 ＠＠ 16) UNAME_MACHINE="alphaev6" ;; - esac + esac - objdump --private-headers dummy | \ + objdump --private-headers $dummy | \ grep ld.so.1 > /dev/null if test "$?" = 0 ; then LIBC="libc1" fi - fi - rm -f dummy.s dummy + fi + rm -f $dummy.s $dummy echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 elif test "${UNAME_MACHINE}" = "mips" ; then - cat >dummy.c <<EOF -main(argc, argv) - int argc; - char *argv[]; -{ + cat >$dummy.c <<EOF +#ifdef __cplusplus + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif #ifdef __MIPSEB__ printf ("%s-unknown-linux-gnu\n", argv[1]); #endif ＠＠ -625,8 +766,8 ＠＠ return 0; } EOF - ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy else # Either a pre-BFD a.out linker (linux-gnuoldld) # or one that does not give us useful --help. ＠＠ -645,12 +786,13 ＠＠ ;; esac # Determine whether the default compiler is a.out or elf - cat >dummy.c <<EOF + cat >$dummy.c <<EOF #include <features.h> -main(argc, argv) - int argc; - char *argv[]; -{ +#ifdef __cplusplus + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 ＠＠ -667,8 +809,8 ＠＠ return 0; } EOF - ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy fi ;; # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions # are messed up and put the nodename in both sysname and nodename. ＠＠ -684,10 +826,20 ＠＠ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i?86:*:5:7*) + # Fixed at (any) Pentium or better + UNAME_MACHINE=i586 + if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then + echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION} else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} + echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} fi exit 0 ;; i?86:*:3.2:*) ＠＠ -699,18 +851,15 ＠＠ (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 + (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; - i?86:UnixWare:*:*) - if /bin/uname -X 2>/dev/null >/dev/null ; then - (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - fi - echo ${UNAME_MACHINE}-unixware-${UNAME_RELEASE}-${UNAME_VERSION} - exit 0 ;; pc:*:*:*) # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. ＠＠ -752,7 +901,7 ＠＠ mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; - i?86:LynxOS:2.*:*) + i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; TSUNAMI:LynxOS:2.*:*) ＠＠ -764,6 +913,9 ＠＠ SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; ＠＠ -794,7 +946,7 ＠＠ news*:NEWS-OS:*:6*) echo mips-sony-newsos6 exit 0 ;; - R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R4000:UNIX_SV:*:*) + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else ＠＠ -810,12 +962,27 ＠＠ BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:QNX:*:4*) + echo i386-qnx-qnx${UNAME_VERSION} + exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 -cat >dummy.c <<EOF +cat >$dummy.c <<EOF #ifdef _SEQUENT_ # include <sys/types.h> # include <sys/utsname.h> ＠＠ -853,7 +1020,10 ＠＠ #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif ＠＠ -913,8 +1083,8 ＠＠ } EOF -${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0 -rm -f dummy.c dummy +$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0 +rm -f $dummy.c $dummy # Apollos put the system type in the environment. mt> What would a string of type two look like!? Would hppa2.0n and mt> hppa2.0w be a valid string describing the architecture? Please note mt> the {w,n} expand to wide (64bit kernel) and narrow (32bit kernel) and mt> are closely related to the HP compiler architecture switches. mt> See the attach patch how the changes would look like. mt> --- config.sub Mon Jan 3 15:06:03 2000 mt> +++ config.sub.orig Mon Jan 3 15:02:28 2000 mt> ＠＠ -152,7 +152,6 ＠＠ mt> tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ mt> | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ mt> | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \ mt> - | hppa2.0n | hppa2.0w \ mt> | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \ mt> | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \ mt> | mips64 | mipsel | mips64el | mips64orion | mips64orionel \ mt> ＠＠ -177,7 +176,6 ＠＠ mt> | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ mt> | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \ mt> | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \ mt> - | hppa2.0n-* | hppa2.0w-* \ mt> | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \ mt> | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \ mt> | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \

Martin Buchholz writes: I just sync'd config.guess (1.158) and config.sub (1.169) and did test build (21.2.23) with no problems. Looks like a seamless transition. --Marcus

Martin Buchholz writes: What's the problem for 64-bit HP? Anything, where I could help (at least with some warm words ;-) Sure. --Marcus

Martin Buchholz writes: Sorry for the confusion but I thought _the_ problem was a distincs one (another problem). in the case of config.sub and config.guess it is not a problem for 64-bit HP in 21.1 (at least I didn't see it this way). In fact, the XEmacs 21.1.x code stream has a set of config.* tools that do not report hppa2.0{w,n} (only hppa2.0), IIRC. --Marcus