7:21 a.m.
Hi!
1998-06-27 Adrian Aichner <aichner(a)ecf.teradyne.com>
* cl.texi: See ALL.
* info-stnd.texi: Fixed ＠setfilename.
* info.texi: Fixed ＠setfilename and a typo.
* standards.texi: Added NEXT to ＠node Preface. See ALL.
* texinfo.texi: Fixed section names, quoted usage of ＠TeX{},
changed some occurences of `:' to `colon'.
* xemacs-faq.texi: See ALL.
* internals/internals.texi: See ALL.
* lispref/back.texi: Fixed ＠setfilename.
* lispref/compile.texi: See ALL.
* lispref/debugging.texi: See ALL.
* lispref/edebug-inc.texi: Added NEXT and UP to ＠node Edebug.
* lispref/eval.texi: See ALL.
* lispref/extents.texi: See ALL.
* lispref/loading.texi: See ALL.
* lispref/searching.texi: Escaped `(' in
＠cindex ＠samp{(?:} in regex
* lispref/variables.texi: See ALL.
cd c:/export/home/tmp/CVSroot/xemacs-20/man/
cvs diff
Compilation started at Sat Jun 27 17:42:32 1998
? texinfo-b44.texi
? texinfo.err
? internals/index.texi
? lispref/index.texi
? lispref/lispref.err
cvs server: Diffing .
Index: cl.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/cl.texi,v
retrieving revision 1.6
diff -u -r1.6 cl.texi
--- cl.texi 1998/04/18 23:25:13 1.6
+++ cl.texi 1998/06/27 23:29:48
＠＠ -3221,7 +3221,7 ＠＠
(defsubst foo (...) ...) ; instead of defun; Emacs 19 only
＠end example
-＠strong{Note:} This declaration remains in effect after the
+＠strong{Please note:} This declaration remains in effect after the
containing source file is done. It is correct to use it to
request that a function you have defined should be inlined,
but it is impolite to use it to request inlining of an external
Index: info-stnd.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/info-stnd.texi,v
retrieving revision 1.2
diff -u -r1.2 info-stnd.texi
--- info-stnd.texi 1997/07/19 22:11:47 1.2
+++ info-stnd.texi 1998/06/27 23:29:55
＠＠ -1,6 +1,6 ＠＠
\input texinfo ＠c -*-texinfo-*-
＠comment %**start of header
-＠setfilename info-stnd.info
+＠setfilename ../info/info-stnd.info
＠settitle GNU Info
＠set InfoProgVer 2.11
＠paragraphindent none
Index: info.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/info.texi,v
retrieving revision 1.3
diff -u -r1.3 info.texi
--- info.texi 1997/07/19 22:11:48 1.3
+++ info.texi 1998/06/27 23:30:00
＠＠ -1,6 +1,6 ＠＠
\input texinfo ＠c -*-texinfo-*-
＠comment %**start of header
-＠setfilename info.info
+＠setfilename ../info/info.info
＠settitle Info 1.0
＠comment %**end of header
＠comment $Id: info.texi,v 1.3 1997/07/19 22:11:48 steve Exp $
＠＠ -397,7 +397,7 ＠＠
screen. There is one more line beneath that one, but usually it is
blank. If it is empty, Info is ready for a command, such as ＠kbd{n}
or ＠kbd{b} or Space or ＠kbd{m}. If that line contains text ending
-in a colon, it mean Info is trying to read the ＠dfn{argument} to a
+in a colon, it means Info is trying to read the ＠dfn{argument} to a
command. At such times, commands do not work, because Info tries to
use them as the argument. You must either type the argument and
finish the command you started, or type ＠kbd{Control-g} to cancel the
Index: standards.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/standards.texi,v
retrieving revision 1.2
diff -u -r1.2 standards.texi
--- standards.texi 1998/06/13 04:28:11 1.2
+++ standards.texi 1998/06/27 23:30:11
＠＠ -93,7 +93,7 ＠＠
* Managing Releases:: The Release Process
＠end menu
-＠node Preface
+＠node Preface, , Top
＠chapter About the GNU Coding Standards
The GNU Coding Standards were written by Richard Stallman and other GNU
＠＠ -1337,9 +1337,9 ＠＠
＠samp{-q} in Make.
＠item quiet
-Used in many programs to inhibit the usual output. ＠strong{Note:} every
-program accepting ＠samp{--quiet} should accept ＠samp{--silent} as a
-synonym.
+Used in many programs to inhibit the usual output. ＠strong{Please
+note:} every program accepting ＠samp{--quiet} should accept
+＠samp{--silent} as a synonym.
＠item quiet-unshar
＠samp{-Q} in ＠code{shar}
＠＠ -1452,7 +1452,7 ＠＠
＠item silent
Used in many programs to inhibit the usual output.
-＠strong{Note:} every program accepting
+＠strong{Please note:} every program accepting
＠samp{--silent} should accept ＠samp{--quiet} as a synonym.
＠item size
Index: texinfo.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/texinfo.texi,v
retrieving revision 1.7
diff -u -r1.7 texinfo.texi
--- texinfo.texi 1998/06/20 00:58:34 1.7
+++ texinfo.texi 1998/06/27 23:31:26
＠＠ -9173,7 +9173,7 ＠＠
＠node pounds, minus, TeX and copyright, Insertions
-＠section ＠code{＠＠pounds}＠{＠} (＠pounds{}): Pounds Sterling
+＠section ＠code{＠＠pounds＠{＠}} (＠pounds{}): Pounds Sterling
＠findex pounds
Use the ＠code{＠＠pounds＠{＠}} command to generate `＠pounds{}'. In a
＠＠ -9213,7 +9213,7 ＠＠
＠node math, Glyphs, minus, Insertions
-＠section ＠code{＠＠math}: Inserting Mathematical Expressions
+＠section ＠code{＠＠math} - Inserting Mathematical Expressions
＠findex math
＠cindex Mathematical expressions
＠＠ -12310,7 +12310,7 ＠＠
＠example
\input texinfo
-＠＠setfilename ＠var{arg-not-used-by-＠TeX{}}
+＠＠setfilename ＠var{arg-not-used-by-＠＠TeX＠{＠}}
＠end example
＠noindent
＠＠ -13383,7 +13383,7 ＠＠
＠code{INFOPATH} environment variable to initialize the value of Emacs's
own ＠code{Info-directory-list} variable.
-＠cindex ＠samp{:} ＠r{last in ＠code{INFOPATH}}
+＠cindex colon ＠r{last in ＠code{INFOPATH}}
However you set ＠code{INFOPATH}, if its last character is a colon, this
is replaced by the default (compiled-in) path. This gives you a way to
augment the default path with new directories without having to list all
＠＠ -13922,7 +13922,7 ＠＠
＠item ＠＠dots＠{＠}
Insert an ellipsis: ＠samp{＠dots{}}.
-＠xref{dots, , ＠code{＠＠dots}}.(a)refill
+＠xref{dots, , ＠code{＠＠dots＠{＠}}}.(a)refill
＠item ＠＠email＠{＠var{address}[, ＠var{displayed-text}]＠}
Indicate an electronic mail address.
＠＠ -14188,7 +14188,7 ＠＠
＠item ＠＠math＠{＠var{mathematical-expression}＠}
Format a mathematical expression.
-＠xref{math, , ＠code{＠＠math}: Inserting Mathematical Expressions}.
+＠xref{math, , ＠code{＠＠math} - Inserting Mathematical Expressions}.
＠item ＠＠menu
Mark the beginning of a menu of nodes in Info. No effect in a printed
＠＠ -17209,7 +17209,7 ＠＠
see ＠ref{Footnotes},＠*
see ＠ref{dmn, , Format a Dimension},＠*
see ＠ref{Raise/lower sections, , ＠code{＠＠raisesections} and ＠code{＠＠lowersections}},＠*
-see ＠ref{math, , ＠code{＠＠math}: Inserting Mathematical Expressions}.＠*
+see ＠ref{math, , ＠code{＠＠math} - Inserting Mathematical Expressions}.＠*
see ＠ref{minus, , Inserting a Minus Sign},＠*
see ＠ref{paragraphindent, , Paragraph Indenting},＠*
see ＠ref{Cross Reference Commands},＠*
Index: xemacs-faq.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/xemacs-faq.texi,v
retrieving revision 1.22
diff -u -r1.22 xemacs-faq.texi
--- xemacs-faq.texi 1998/06/13 04:28:18 1.22
+++ xemacs-faq.texi 1998/06/27 23:31:54
＠＠ -2796,7 +2796,7 ＠＠
(frame-notice-user-settings)
＠end lisp
-＠strong{NOTE:} The single minibuffer frame may not be to everyone's
+＠strong{Please note:} The single minibuffer frame may not be to everyone's
taste, and there any number of other XEmacs options settings that may
make it difficult or inconvenient to use.
cvs server: Diffing internals
Index: internals/internals.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/internals/internals.texi,v
retrieving revision 1.16
diff -u -r1.16 internals.texi
--- internals.texi 1998/05/05 21:49:35 1.16
+++ internals.texi 1998/06/27 23:32:32
＠＠ -1695,11 +1695,12 ＠＠
the ＠file{temacs} phase.
＠cindex copy-on-write
- ＠strong{Note:} This kludge only works on a few systems nowadays, and is
-rapidly becoming irrelevant because most modern operating systems provide
-＠dfn{copy-on-write} semantics. All data is initially shared between
-processes, and a private copy is automatically made (on a page-by-page
-basis) when a process first attempts to write to a page of memory.
+ ＠strong{Please note:} This kludge only works on a few systems
+nowadays, and is rapidly becoming irrelevant because most modern
+operating systems provide ＠dfn{copy-on-write} semantics. All data is
+initially shared between processes, and a private copy is automatically
+made (on a page-by-page basis) when a process first attempts to write to
+a page of memory.
Formerly, there was a requirement that static variables not be
declared inside of functions. This had to do with another hack along
＠＠ -1984,15 +1985,15 ＠＠
＠code{obarray} to a different value [although this is likely to make
XEmacs crash!].)
- ＠strong{Note:} It is potentially deadly if you declare a ＠samp{Q...}
-variable in two different modules. The two calls to ＠code{defsymbol()}
-are no problem, but some linkers will complain about multiply-defined
-symbols. The most insidious aspect of this is that often the link will
-succeed anyway, but then the resulting executable will sometimes crash
-in obscure ways during certain operations! To avoid this problem,
-declare any symbols with common names (such as ＠code{text}) that are not
-obviously associated with this particular module in the module
-(a)file{general.c}.
+ ＠strong{Please note:} It is potentially deadly if you declare a
+＠samp{Q...} variable in two different modules. The two calls to
+＠code{defsymbol()} are no problem, but some linkers will complain about
+multiply-defined symbols. The most insidious aspect of this is that
+often the link will succeed anyway, but then the resulting executable
+will sometimes crash in obscure ways during certain operations! To
+avoid this problem, declare any symbols with common names (such as
+＠code{text}) that are not obviously associated with this particular
+module in the module ＠file{general.c}.
Global variables whose names begin with ＠samp{V} are variables that
contain Lisp objects. The convention here is that all global variables
＠＠ -2048,7 +2049,7 ＠＠
To get started debugging XEmacs, take a look at the ＠file{gdbinit} and
＠file{dbxrc} files in the ＠file{src} directory.
-(a)xref{Q2.1.15: How to Debug an XEmacs problem with a debugger,,,
+(a)xref{Q2.1.15 - How to Debug an XEmacs problem with a debugger,,,
xemacs-faq, XEmacs FAQ}.
＠＠ -4326,9 +4327,9 ＠＠
consequently should be the most heavily nested sub-object, such as a
long list.)
-＠strong{Note}: When the mark method is called, garbage collection
-is in progress, and special precautions need to be taken
-when accessing objects; see section (B) above.
+＠strong{Please note:} When the mark method is called, garbage collection
+is in progress, and special precautions need to be taken when accessing
+objects; see section (B) above.
If your mark method does not need to do anything, it can be
＠code{NULL}.
cvs server: Diffing lispref
Index: lispref/back.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/back.texi,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 back.texi
--- back.texi 1996/12/18 22:43:47 1.1.1.1
+++ back.texi 1998/06/27 23:32:33
＠＠ -1,6 +1,6 ＠＠
\input /home/gd/gnu/doc/texinfo.tex ＠c -*-texinfo-*-
＠c %**start of header
-＠setfilename back-cover
+＠setfilename ../../info/back-cover
＠settitle XEmacs Lisp Reference Manual
＠c %**end of header
.
Index: lispref/compile.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/compile.texi,v
retrieving revision 1.3
diff -u -r1.3 compile.texi
--- compile.texi 1997/12/06 22:26:27 1.3
+++ compile.texi 1998/06/27 23:32:36
＠＠ -483,7 +483,7 ＠＠
This function constructs and returns a compiled-function object
with ＠var{elements} as its elements.
-＠emph{NOTE:} Unlike all other Emacs-lisp functions, calling this with
+＠emph{Please note:} Unlike all other Emacs-lisp functions, calling this with
five arguments is ＠emph{not} the same as calling it with six arguments,
the last of which is ＠code{nil}. If the ＠var{interactive} arg is
specified as ＠code{nil}, then that means that this function was defined
Index: lispref/debugging.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/debugging.texi,v
retrieving revision 1.2
diff -u -r1.2 debugging.texi
--- debugging.texi 1997/07/13 22:42:17 1.2
+++ debugging.texi 1998/06/27 23:32:40
＠＠ -190,7 +190,7 ＠＠
If the function is already set up to invoke the debugger on entry,
＠code{debug-on-entry} does nothing.
- ＠strong{Note:} if you redefine a function after using
+ ＠strong{Please note:} if you redefine a function after using
＠code{debug-on-entry} on it, the code to enter the debugger is lost.
＠code{debug-on-entry} returns ＠var{function-name}.
Index: lispref/edebug-inc.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/edebug-inc.texi,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 edebug-inc.texi
--- edebug-inc.texi 1996/12/18 22:43:48 1.1.1.1
+++ edebug-inc.texi 1998/06/27 23:32:49
＠＠ -1,6 +1,6 ＠＠
＠comment -*-texinfo-*-
-＠node Edebug
+＠node Edebug, , Compilation Errors, Top
＠section Edebug
＠cindex Edebug mode
Index: lispref/eval.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/eval.texi,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 eval.texi
--- eval.texi 1996/12/18 22:43:48 1.1.1.1
+++ eval.texi 1998/06/27 23:32:52
＠＠ -109,7 +109,7 ＠＠
after reading a form from text being edited or getting one from a
property list. On these occasions, use the ＠code{eval} function.
- ＠strong{Note:} it is generally cleaner and more flexible to call
+ ＠strong{Please note:} it is generally cleaner and more flexible to call
functions that are stored in data structures, rather than to evaluate
expressions stored in data structures. Using functions provides the
ability to pass information to them as arguments.
Index: lispref/extents.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/extents.texi,v
retrieving revision 1.5
diff -u -r1.5 extents.texi
--- extents.texi 1997/11/12 07:10:10 1.5
+++ extents.texi 1998/06/27 23:32:57
＠＠ -45,7 +45,7 ＠＠
are invisible to functions that merely examine the text of a buffer or
string.
- ＠emph{NOTE}: An alternative way to add properties to a buffer or
+ ＠emph{Please note:} An alternative way to add properties to a buffer or
string is to use text properties. ＠xref{Text Properties}.
An extent is logically a Lisp object consisting of a start position,
Index: lispref/loading.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/loading.texi,v
retrieving revision 1.3
diff -u -r1.3 loading.texi
--- loading.texi 1998/05/03 00:24:09 1.3
+++ loading.texi 1998/06/27 23:33:01
＠＠ -647,7 +647,7 ＠＠
; ＠r{FSF Emacs 19.34 and later.}
＠end example
-＠strong{NOTE}: The advanced arguments of this function (anything other than a
+＠strong{Please note:} The advanced arguments of this function (anything other than a
symbol) are not yet supported by FSF Emacs. If you feel they are useful
for supporting multiple Emacs variants, lobby Richard Stallman at
＠samp{<bug-gnu-emacs＠(a)prep.ai.mit.edu>}.
Index: lispref/searching.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/searching.texi,v
retrieving revision 1.4
diff -u -r1.4 searching.texi
--- searching.texi 1998/06/13 04:28:21 1.4
+++ searching.texi 1998/06/27 23:33:08
＠＠ -455,7 +455,7 ＠＠
the same exact text.
＠item \(?: ＠dots{} \)
-＠cindex ＠samp{(?:} in regex
+＠cindex ＠samp{\(?:} in regexp
＠cindex regexp grouping
is called a ＠dfn{shy} grouping operator, and it is used just like
＠samp{\( ＠dots{} \)}, except that it does not cause the matched
Index: lispref/variables.texi
===================================================================
RCS file: /usr/CVSroot/XEmacs/xemacs-20/man/lispref/variables.texi,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 variables.texi
--- variables.texi 1996/12/18 22:43:48 1.1.1.1
+++ variables.texi 1998/06/27 23:33:14
＠＠ -1087,7 +1087,7 ＠＠
between different kinds of bindings; it knows only which variable the
binding was made for.
-＠strong{Note:} do not use ＠code{make-local-variable} for a hook
+＠strong{Please note:} do not use ＠code{make-local-variable} for a hook
variable. Instead, use ＠code{make-local-hook}. ＠xref{Hooks}.
＠end deffn
cvs server: Diffing new-users-guide
cvs server: Diffing xemacs
Compilation exited abnormally with code 1 at Sat Jun 27 17:46:55
--
Adrian Aichner
Applications Engineer
Teradyne GmbH
Semiconductor Test Group Telephone +49/89/41861(0)-208
Dingolfinger Strasse 2 Fax +49/89/41861-217
D-81673 MUENCHEN E-mail aichner(a)ecf.teradyne.com