This bug report will be sent to the XEmacs Development Team,
not to your local site managers!!
Please write in English, because the XEmacs maintainers do not have
translators to read other languages for them.
Please describe as succinctly as possible:
- What happened.
- What you thought should have happened.
- Precisely what you were doing at the time.
Please also include any C or lisp back-traces that you may have.
================================================================
Dear Bug Team!
When i start vm, after reading the INBOX, xemacs crashes.
Here is the output from xemacs:
Warning: Missing charsets in String to FontSet conversion
Warning: Cannot convert string "-dt-interface
system-medium-r-normal-s*-12-*-*-*-*-*-*-*" to type FontSet
Fatal error (4).
Your files have been auto-saved.
Use `M-x recover-session' to recover them.
If you have access to the PROBLEMS file that came with your
version of XEmacs, please check to see if your crash is described
there, as there may be a workaround available.
Otherwise, please report this bug by running the send-pr
script included with XEmacs, or selecting `Send Bug Report'
from the help menu.
As a last resort send ordinary email to `crashes(a)xemacs.org'.
*MAKE SURE* to include the information in the command
M-x describe-installation.
If at all possible, *please* try to obtain a C stack backtrace;
it will help us immensely in determining what went wrong.
To do this, locate the core file that was produced as a result
of this crash (it's usually called `core' and is located in the
directory in which you started the editor, or maybe in your home
directory), and type
gdb /usr/local/bin/xemacs core
then type `where' when the debugger prompt comes up.
(If you don't have GDB on your system, you might have DBX,
or XDB, or SDB. A similar procedure should work for all of
these. Ask your system administrator if you need more help.)
Lisp backtrace follows:
open-database("~/.vm.folders.db" berkeley-db hash "rw+")
byte-code("..." [mode vm-folders-summary-database open-database berkeley-db
hash] 5)
# (condition-case ... . ((error (byte-code "=c1=c2\"=88=c3=c4!=88=c5=87"
... 3))))
# bind (mode)
vm-open-folders-summary-database("rw+")
byte-code("..." [data folder key db totals fs throw done nil featurep
berkeley-db vm-open-folders-summary-database "rw+" vm-make-folders-summary-key
prin1-to-string put-database t close-database intern-soft vm-set-fs-total-count-of
int-to-string vm-set-fs-new-count-of vm-set-fs-unread-count-of 2
vm-set-fs-deleted-count-of 3 vm-mark-for-folders-summary-update vm-folders-summary-hash
vm-folders-summary-database] 6)
# (catch done ...)
# bind (fs db key data totals folder)
vm-store-folder-totals("/local/olav/VmMail/INBOX" (345 0 0 0))
# bind (full-startup did-read-index-file folder-buffer first-time totals-blurb
folder-name remote-spec preserve-auto-save-file)
byte-code("..." [totals-blurb preserve-auto-save-file file full-startup folder
buffer-file-coding-system bufferp nil pop vm-pop-find-spec-for-name error "No such
POP folder: %s" vm-pop-make-filename-for-spec expand-file-name file-directory-p
"%s is a directory" vm-get-file-buffer t no-conversion raw-text message
"Reading %s..." find-file-noselect "Reading %s... done" buffer-name
rename-buffer set-buffer-multibyte get-coding-system no-conversion-unix no-conversion-dos
no-conversion-mac binary buffer-modified-p ((set-buffer-modified-p omodified))
encode-coding-region set-buffer-file-coding-system decode-coding-region coding-system-base
raw-text-unix raw-text-mac raw-text-dos ((set-buffer-modified-p omodified))
vm-check-for-killed-summary vm-check-for-killed-presentation 0 vm-mode
file-newer-than-file-p make-auto-save-file-name default-value vm-folder-read-only
buffer-disable-undo abbrev-mode auto-fill-mode vm-fsfemacs-nonmule-display-8bit-chars
vm-mode-internal vm-set-folder!
-pop-maildrop-spec vm-read-index-file-maybe vm-assimilate-new-messages
vm-gobble-visible-header-variables vm-gobble-bookmark vm-gobble-pop-retrieved
vm-gobble-imap-retrieved vm-gobble-summary vm-gobble-labels first-time remote-spec
buffer-file-name this-command folder-name did-read-index-file access-method
vm-folder-directory vm-folder-history vm-fsfemacs-mule-p buffer-read-only
vm-summary-buffer folder-buffer vm-primary-inbox default-directory vm-xemacs-mule-p
vm-xemacs-file-coding-p item omodified vm-presentation-buffer buffer-to-display
vm-raise-frame-at-startup vm-auto-decode-mime-messages coding-system-for-read
default-enable-multibyte-characters enable-local-eval enable-local-variables
inhibit-local-variables enable-multibyte-characters vm-messages-not-on-disk major-mode
read-only vm-totals vm-use-menus vm-mutable-frames vm-frame-per-summary vm-mutable-windows
vm-message-list vm-auto-get-new-mail vm-block-new-mail vm-startup-message-displayed
vm-start-itimers-if-needed!
apply vm-goto-new-folder-frame-maybe (folder) (primary-folde!
r folder) vm-display vm startup vm-raise-frame vm-emit-totals-blurb vm-store-folder-totals
vm-thoughtfully-select-message vm-update-summary-and-mode-line
vm-toolbar-install-or-uninstall-toolbar vm-menu-support-possible-p
vm-menu-install-visited-folders-menu vm-should-generate-summary vm-summarize
switch-to-buffer vm-preview-current-message run-hooks vm-visit-folder-hook
substitute-command-keys "Auto save file is newer; consider \\[recover-file]. FOLDER
IS READ ONLY." throw done "Checking for new mail for %s..."
vm-get-spooled-mail vm-display-startup-message input-pending-p] 9)
# (catch done ...)
# bind (access-method read-only folder)
#<compiled-function (&optional folder read-only access-method) "...(7)"
[vm-session-initialization done (byte-code "=c6!?=c7=89=89=89=89=89=89AD@LEF=c8==ab=95=c9!=89A=ac=85=ca=cb\"=88D=ccA!=c6!=ab=83=aa=ef=ae=86=cdMG\"=ce\n!=ab=86=ca=cf\n\"=aa=d9=d0\n!=ae=d4G=ab=86=cdG!=ae=82N=d1=c7=89=89O=ab=83=d2=aa=88P=ab=83=d2=aa=81=d3WXYZ[N=d4=d5\n\"=88=d6\n!A=ae=85=ae=82M=89QH(a)=9a=ac=87QHBH)=d4=d7\n\"=88.)=89Lq=88F=c8==ab=8dD=d8
=9a=ac=86=d9D=d1\"=88I=ab=88\\=ab=84=da=c7!=88O=ac=84P=ab=bf=db
!=db=dc!==ac=b6=db
!=db=dd!==ac=ad=db
!=db=de!==ac=a4=db
!=db=df!==ac=9b=c7=e0 RJ=e1=8e=e2ed
#=88=e3=d2=c7\"=88=e4ed
#=88+I=ab=88
=ac=85=e3=d3=c7\"=88I=ab=bf=e5
!=e5=e6!==ac=b6=e5
!=e5=e7!==ac=ad=e5
!=e5=e8!==ac=a4=e5
!=e5=d2!==ac=9b=c7=e0 RJ=e9=8e=e2ed
#=88=e3=d3=c7\"=88=e4ed
#=88+=ea =88=eb =88=e0 =ac=83=ec]^=ed=?@B=ad=8b=e0 ?=ad=86=ee=ef
B\"=89=ae=8f_=ae=8b=f0=f1!=ae=86@=ad=82J1@=ab=a7=f2p!=88=f3=ec!=88=f4=ec!=88=f5
=88=f6F!=!
88F=c8==ab=85=f7A!=88=e0 =ac=84=f8 E=f9=c7E?=c7=d1$=88@=ab=96E=ac=92=fa =88=fb
=88=fc =88=fd =88=fe =88=ff =88@=ab=85=81i
Show replies by date
|--==> "HOE" == Hans Olav Eggestad <hans.olav.eggestad(a)jordforsk.no>
writes:
HOE> When i start vm, after reading the INBOX, xemacs crashes.
What version of VM?
Can you please try VM 7.04 which you can get from the "Pre-Releases"
download site. If there are no packages there it means that they have
been moved to the normal package directory.
--
|---<Steve Youngs>---------------<GnuPG KeyID: 10D5C9C5>---|
| XEmacs - It's not just an editor. |
| It's a way of life. |
|------------------------------------<youngs(a)xemacs.org>---|