Michael Kifer writes:
In fact, I don't see any packages at all in the default
distribution, and
You won't, because there aren't any packages in the default
installation of XEmacs itself. Haven't been since 1998 or so, that
was the whole point, to allow the packages to be distributed
separately from the core.
If you have a set of packages installed for 21.4, you can use those.
If you do, the most likely reason they are not being found is that
XEmacs since 21.5.20-something looks for the packages in
$prefix/share/xemacs instead of $prefix/lib/xemacs for FHS
conformance. You probably have an installation in $prefix/lib/xemacs.
A symlink from $prefix/share/xemacs to $prefix/lib/xemacs should do
the trick.
If that doesn't seem like a good idea but you do have an installation
in $prefix/lib/xemacs, you could use the environment variable
EMACSPACKAGEPATH=$prefix/lib/xemacs/xemacs-packages
IIRC.
even README.packages, which should exist according to INSTALL, is
missing.
That's been gone since 2005, folded into the FAQ. The same ChangeLog
claims to have removed references to it but Ben missed the reference
in INSTALL, I guess.
Here's the version from 21.4, this part of XEmacs hasn't changed in a while.
-*- Outline -*-
This file is in Outline mode. It is best viewed under XEmacs.
Press C-c C-o (Ctrl+c Ctrl+o) now to see a list of headings.
To expand a heading: Put the cursor on the heading and press C-c C-s
To collapse a heading: Press C-c C-d
For general XEmacs navigation tips: Press C-h t
The XEmacs Packages Quick Start Guide
-------------------------------------
This text is intended to help you get started installing a new XEmacs and
its packages. For more details see the 'Startup Paths' and 'Packages'
sections of the XEmacs info manual.
* Real Real Quickstart FAQ
--------------------------
Q. Do I need to have the packages to compile XEmacs?
A. Theoretically, no -- XEmacs will build and install just fine without any
packages installed. However, only the most basic editing functions will
be available with no packages installed, so installing packages is an
essential part of making your installed XEmacs _useful_.
Q. I really liked the old way that packages were bundled and do not
want to mess with packages at all.
A. You can grab all the packages at once like you used to with old
XEmacs versions, skip to the 'Sumo Tarball' section below.
Q. How do I tell XEmacs where to find the packages?
A. Normally, you put the packages under $prefix/lib/packages, where
$prefix is specified using the `--prefix' parameter to `configure'.
(See `Package hierarchies' below). However, if you have the packages
somewhere else (e.g. you're a developer and are compiling the packages
yourself, and want your own private copy of everything), use the
`--package-path' parameter, something like this:
configure
--package-path="~/.xemacs::/src/xemacs/site-packages:/src/xemacs/xemacs-packages:/src/xemacs/mule-packages"
...
Q. After installing, I want XEmacs to do `foo', but when I invoke it
(or click the toolbar button or select the menu item), nothing (or
an error) happens, and it used to work.
A. See the first FAQ; you may be missing a package that is essential to
you. You can either track it down and install it, or install the
`Sumo Tarball' (see the second FAQ).
* A note of caution
-------------------
The XEmacs package system is still in its infancy. Please expect a few
minor hurdles on the way. Also neither the interface nor the structure is
set in stone. The XEmacs maintainers reserve the right to sacrifice
backwards compatibility as quirks are worked out over the coming
releases.
* Some package theory
---------------------
In order to reduce the size and increase the maintainability of XEmacs,
the majority of the Elisp packages that came with previous releases
have been unbundled. They have been replaced by the package system.
Each elisp add-on (or groups of them when they are small) now comes
in its own tarball that contains a small search hierarchy.
You select just the ones you need. Install them by untarring them into
the right place. On startup XEmacs will find them, set up the load
path correctly, install autoloads, etc, etc.
* Package hierarchies
---------------------
On Startup XEmacs looks for packages in so-called package hierarchies.
Normally, there are three system wide hierarchies, like this:
$prefix/lib/xemacs/xemacs-packages/
Normal packages go here.
$prefix/lib/xemacs/mule-packages/
Mule packages go here and are only searched by MULE-enabled XEmacsen.
$prefix/lib/xemacs/site-packages/
Local and 3rd party packages go here.
This is what you get when you untar the SUMO tarballs under
$prefix/lib/xemacs.
$prefix is specified using the `--prefix' parameter to `configure', and
defaults to `usr/local'.
If your packages are located in the above directories, XEmacs will
automatically find them at startup; however, if you have your packages
somewhere else (e.g. you're a developer and are compiling the packages
yourself, and want your own private copy of everything), you can tell
XEmacs specifically where to look for the packages by using the
`--package-path' parameter to the 'configure' script. Normally, it looks
like this:
configure
--package-path="~/.xemacs::/src/xemacs/site-packages:/src/xemacs/xemacs-packages:/src/xemacs/mule-packages"
...
See `configure.usage' for more info about the format of this parameter.
* Where to get the packages
---------------------------
Packages are available from
ftp://ftp.xemacs.org/pub/xemacs/packages
and its mirrors.
* How to install the packages
-----------------------------
There are a few different ways to install packages:
1. Automatically, using the package tools from XEmacs.
2. Manually, using individual package tarballs.
3. Manually, all at once, using the 'Sumo Tarball'.
** Automatically, using the package tools from XEmacs
-----------------------------------------------------
XEmacs comes with some tools to make the periodic updating and
installing easier. It will notice if new packages or versions are
available and will fetch them from the FTP site.
Unfortunately this requires that a few packages are already in place.
You will have to install them by hand as above or use a SUMO tarball.
This requirement will hopefully go away in the future. The packages
you need are:
efs - To fetch the files from the FTP site or mirrors.
xemacs-base - Needed by efs.
and optionally:
mailcrypt - For PGP verification of the package-index file.
After installing these by hand, fire up XEmacs and follow these
steps.
(1) Choose a download site.
- via menu: Tools -> Packages -> Set Download Site
- via keyb: M-x customize-variable RET package-get-remote RET
(put in the details of remote host and directory)
If the package tarballs _AND_ the package-index file are in a
local directory, you can: M-x pui-set-local-package-get-directory RET
(2) Obtain a list of packages and display the list in a buffer named
"*Packages*".
- menu: Tools -> Packages -> List & Install
- keyb: M-x pui-list-packages RET
XEmacs will now connect to the remote site and download the
latest package-index file.
The resulting buffer, "*Packages*" has brief instructions at the
end of the buffer.
(3) Choose the packages you wish to install.
- mouse: Click button 2 on the package name.
- keyb: RET on the package name
(4) Make sure you have everything you need.
- menu: Packages -> Add Required
- keyb: r
XEmacs will now search for packages that are required by the
ones that you have chosen to install and offer to select
those packages also.
For novices and gurus alike, this step can save your bacon.
It's easy to forget to install a critical package.
(5) Download and install the packages.
- menu: Packages -> Install/Remove Selected
- keyb: x
** Manually, using individual package tarballs
----------------------------------------------
Fetch the packages from the FTP site, CD-ROM whatever. The filenames
have the form name-<version>-pkg.tar.gz and are gzipped tar files. For
a fresh install it is sufficient to untar the file at the top of the
package hierarchy.
Note: If you are upgrading packages already installed, it's best to
remove the old package first (see 'Upgrading/Removing Packages' below).
For example if we are installing the 'xemacs-base'
package (version 1.48):
mkdir $prefix/lib/xemacs/xemacs-packages RET # if it does not exist yet
cd $prefix/lib/xemacs/xemacs-packages RET
gunzip -c /path/to/xemacs-base-1.48-pkg.tar.gz | tar xvf - RET
Or if you have GNU tar, the last step can be:
tar zxvf /path/to/xemacs-base-1.48-pkg.tar.gz RET
For MULE related packages, it is best to untar into the mule-packages
hierarchy, i.e. for the mule-base package, version 1.37:
mkdir $prefix/lib/xemacs/mule-packages RET # if it does not exist yet
cd $prefix/lib/xemacs/mule-packages RET
gunzip -c /path/to/mule-base-1.37-pkg.tar.gz | tar xvf - RET
Or if you have GNU tar, the last step can be:
tar zxvf /path/to/mule-base-1.37-pkg.tar.gz RET
** Manually, all at once, using the 'Sumo Tarball'
--------------------------------------------------
Those with little time, cheap connections and plenty of disk space can
install all the packages at once using the sumo tarballs.
Download the file:
xemacs-sumo.tar.gz
For an XEmacs compiled with Mule you also need:
xemacs-mule-sumo.tar.gz
N.B. They are called 'Sumo Tarballs' for good reason. They are
currently about 19MB and 4.5MB (gzipped) respectively.
Install them by:
cd $prefix/lib/xemacs ; gunzip -c <tarballname> | tar xvf - RET
Or, if you have GNU tar:
cd $prefix/lib/xemacs ; tar zxvf /path/to/<tarballname> RET
As the Sumo tarballs are not regenerated as often as the individual
packages, it is recommended that you use the automatic package tools
afterwards to pick up any recent updates.
* After Installation
--------------------
Updated packages can only be used by XEmacs after a restart.
* Which Packages to install?
----------------------------
This is difficult to say. When in doubt install a package. If you
administrate a big site it might be a good idea to just install
everything. A good minimal set of packages for XEmacs-latin1 would be
xemacs-base, xemacs-devel, c-support, cc-mode, debug, dired, efs,
edit-utils, fsf-compat, mail-lib, net-utils, os-utils, prog-modes,
text-modes, time, mailcrypt
If you are using the XEmacs package tools, don't forget to do:
Packages -> Add Required
To make sure you have everything that the packages you have chosen to
install need.
See also '.../etc/PACKAGES' for further descriptions of the individual
packages.
* Upgrading/Removing Packages
-----------------------------
As the exact files and their locations contained in a package may
change it is recommended to remove a package first before installing a
new version. In order to facilitate removal each package contains an
pgkinfo/MANIFEST.pkgname file which list all the files belong to the
package. M-x package-admin-delete-binary-package RET can be used to
remove a package using this file.
Note that the interactive package tools included with XEmacs already do
this for you.
* User Package directories
--------------------------
In addition to the system wide packages, each user can have his own
packages installed under "~/.xemacs/". If you want to install packages
there using the interactive tools, you need to set
'package-get-install-to-user-init-directory' to 't'
* Site lisp/Site start
----------------------
The site-packages hierarchy replaces the old 'site-lisp' directory.
XEmacs no longer looks into a 'site-lisp' directly by default.
A good place to put 'site-start.el' would be in
$prefix/lib/xemacs/site-packages/lisp/
* Finding the right packages
----------------------------
If you want to find out which package contains the functionality you
are looking for, use M-x package-get-package-provider, and give it a
symbol that is likely to be in that package.
For example, if some code you want to use has a (require 'thingatpt)
in it:
M-x package-get-package-provider RET thingatpt RET
which will return something like: (fsf-compat "1.08").
_______________________________________________
XEmacs-Beta mailing list
XEmacs-Beta(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-beta