9:46 p.m.
It's me FKtPp ;) writes:
Then I composed the second path, whth BEG and END limited in range
[0,
(buffer-size)], but, again, I find this even worse:
XEmacs don't accept 0 as extend/overlay starting point, and report
"Argment out of range"
That's right. The buffer indexing scheme is really broken, thanks to
Emacs compatibility. Buffer positions do not point at characters,
they point at insertion points between characters, plus one at each
end. It would make sense to number these 0 ... n, but no, that's not
the way it's done. Instead, they're numbered 1 ... n+1.
(buffer-size) is 1 character less than (point-max) in a widen
buffer.
The second copy is totally broken... :'( sorry for no testing
After some rethought I change the range to [1, (1+ (buffer-size))] , and
run some code assumed would be failed if using the official XEmacs
overlay.el.
Is this working now for your needs?
_______________________________________________
XEmacs-Patches mailing list
XEmacs-Patches(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-patches
1:17 a.m.
New subject: overlay.el bug, incompatable overlays-in
--- "Stephen J. Turnbull" <stephen(a)xemacs.org> wrote:
It's me FKtPp ;) writes:
> Then I composed the second path, whth BEG and END limited in range
[0,
> (buffer-size)], but, again, I find this even worse:
> XEmacs don't accept 0 as extend/overlay starting point, and
report
> "Argment out of range"
That's right. The buffer indexing scheme is really broken, thanks to
Emacs compatibility. Buffer positions do not point at characters,
they point at insertion points between characters, plus one at each
end. It would make sense to number these 0 ... n, but no, that's not
the way it's done. Instead, they're numbered 1 ... n+1.
> (buffer-size) is 1 character less than (point-max) in a widen
buffer.
> The second copy is totally broken... :'( sorry for no testing
>
> After some rethought I change the range to [1, (1+ (buffer-size))]
, and
> run some code assumed would be failed if using the official XEmacs
> overlay.el.
Is this working now for your needs?
Yes, It prevent me from encounter the "args out of range" error for now
at least.
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
XEmacs-Patches mailing list
XEmacs-Patches(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-patches
4:26 p.m.
New subject: overlay.el bug, incompatable overlays-in
Sorry, there are some additional functions in overlay.el need to be changed.
I'll submit another patch for that.
Some functions takes only one parameter (pos), this parameter is also
need to be validated to avoid "args out of range" error..
Thanks,
FKtPp
_______________________________________________
XEmacs-Patches mailing list
XEmacs-Patches(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-patches
3:35 p.m.
New subject: overlay.el bug, incompatable overlays-in
Stephen J. Turnbull wrote:
Is this working now for your needs?
Please check the newly created patch.
_______________________________________________
XEmacs-Patches mailing list
XEmacs-Patches(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-patches
8:33 a.m.
New subject: overlay.el bug, incompatable overlays-in
It's me FKtPp ;) writes:
+(defsubst overlay-validate-begin-end-buffer ()
I prefer the name "overlay-normalize-begin-end-buffer". Validate is
OK, but for example in XML processing a "validating process" will give
a fatal error on invalid XML; it won't fix it up.
+ "validte the value of BEG, END and BUFFER
+
+If BUFFER is nil, set to current buffer. If BEG is
+greater than END, exchange their value. If either
+BEG or END is out of buffer boundary, set their
+value to corresponding boundary-value."
"Normalize the BEG, END, and BUFFER arguments.
BUFFER must be a buffer or nil, meaning the current buffer.
BEG and END must be integers. They are sorted and truncated to values
legal in BUFFER so that 1 <= BEG <= END <= \(1+ \(length BUFFER))."
+ (if (null buffer)
+ (setq buffer (current-buffer))
+ (check-argument-type 'bufferp buffer))
+ (when (> beg end)
+ (setq beg (prog1 end (setq end beg))))
+
+ (setq beg (max beg 1)
+ end (min end (1+ (buffer-size))))
+ t)
I would write these as
(when (< beg 1)
(setq beg 1))
(when (> end (1+ (buffer-size buffer)))
(setq end (1+ (buffer-size buffer))))
+
(defun make-overlay (beg end &optional buffer front-advance rear-advance)
"Create a new overlay with range BEG to END in BUFFER.
If omitted, BUFFER defaults to the current buffer.
＠＠ -76,13 +95,15 ＠＠
The fourth arg FRONT-ADVANCE, if non-nil, makes the
front delimiter advance when text is inserted there.
The fifth arg REAR-ADVANCE, if non-nil, makes the
-rear delimiter advance when text is inserted there."
- (if (null buffer)
- (setq buffer (current-buffer))
- (check-argument-type 'bufferp buffer))
- (when (> beg end)
- (setq beg (prog1 end (setq end beg))))
+rear delimiter advance when text is inserted there.
+BEG and END's value will be exchanged if END is less
+than BEG. And if BEG or END is out of buffer
+boundary the corresponding boundary-value will
+be used."
How about
BEG and END will be normalized so 1 <= BEG <= END <= \(1+ \(length BUFFER)).
and similarly below.
+
+ (overlay-validate-begin-end-buffer)
+
(let ((overlay (make-extent beg end buffer)))
(set-extent-property overlay 'overlay t)
(if front-advance
＠＠ -98,12 +119,19 ＠＠
"Set the endpoints of OVERLAY to BEG and END in BUFFER.
If BUFFER is omitted, leave OVERLAY in the same buffer it inhabits now.
If BUFFER is omitted, and OVERLAY is in no buffer, put it in the current
-buffer."
+buffer.
+
+BEG and END's value will be exchanged if END is less
+than BEG. And if BEG or END is out of buffer
+boundary the corresponding boundary-value will
+be used."
+
(check-argument-type 'overlayp overlay)
(if (null buffer)
(setq buffer (extent-object overlay)))
- (if (null buffer)
- (setq buffer (current-buffer)))
+
+ (overlay-validate-begin-end-buffer)
+
(check-argument-type 'bufferp buffer)
(and (= beg end)
(extent-property overlay 'evaporate)
＠＠ -150,15 +178,32 ＠＠
Overlap means that at least one character is contained within the overlay
and also contained within the specified region.
Empty overlays are included in the result if they are located at BEG
-or between BEG and END."
+or between BEG and END.
+
+If BEG or END is out of buffer boundary the
+corresponding boundary-value will be used."
+
+ (setq beg (max beg 1)
+ end (min end (1+ (buffer-size))))
+
(mapcar-extents #'identity nil nil beg end
'all-extents-closed-open 'overlay))
+(defsubst overlay-validate-pos ()
+ "validate the pos parameter, set it to the corresponding
+boundary-value if it was out of buffer boundary"
+ (setq pos (max pos 1)
+ pos (min pos (1+ (buffer-size)))))
+
(defun next-overlay-change (pos)
"Return the next position after POS where an overlay starts or ends.
-If there are no more overlay boundaries after POS, return (point-max)."
+If there are no more overlay boundaries after POS, return (point-max).
+
+POS will be checked, its value will be set to corresponding
+boundary-value if it was out of buffer boundary."
(let ((next (point-max))
tmp)
+ (overlay-validate-pos)
(map-extents
(lambda (overlay ignore)
(when (or (and (< (setq tmp (extent-start-position overlay)) next)
＠＠ -172,9 +217,13 ＠＠
(defun previous-overlay-change (pos)
"Return the previous position before POS where an overlay starts or ends.
-If there are no more overlay boundaries before POS, return (point-min)."
+If there are no more overlay boundaries before POS, return (point-min).
+
+POS will be checked, its value will be set to corresponding
+boundary-value if it was out of buffer boundary."
(let ((prev (point-min))
tmp)
+ (overlay-validate-pos)
(map-extents
(lambda (overlay ignore)
(when (or (and (> (setq tmp (extent-end-position overlay)) prev)
＠＠ -206,7 +255,11 ＠＠
(cons (nreverse before) (nreverse after))))
(defun overlay-recenter (pos)
- "Recenter the overlays of the current buffer around position POS."
+ "Recenter the overlays of the current buffer around position POS.
+
+POS will be checked, its value will be set to corresponding
+boundary-value if it was out of buffer boundary."
+ (overlay-validate-pos)
(set (make-local-variable 'xemacs-internal-overlay-center-pos) pos))
(defun overlay-get (overlay prop)
_______________________________________________
XEmacs-Patches mailing list
XEmacs-Patches(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-patches
9:22 a.m.
New subject: overlay.el bug, incompatable overlays-in
Hi Stephen,
As you can see, I am not very good at english, so I will rewrite all
the docstring as you suggested.
BTW, some additional reponses inline....
Thanks
FKtPp
--- "Stephen J. Turnbull" <stephen(a)xemacs.org> wrote:
It's me FKtPp ;) writes:
> +(defsubst overlay-validate-begin-end-buffer ()
I prefer the name "overlay-normalize-begin-end-buffer". Validate is
OK, but for example in XML processing a "validating process" will
give
a fatal error on invalid XML; it won't fix it up.
Well, thanks for your suggestion. I'll change it to normalize...
> + "validte the value of BEG, END and BUFFER
> +
> +If BUFFER is nil, set to current buffer. If BEG is
> +greater than END, exchange their value. If either
> +BEG or END is out of buffer boundary, set their
> +value to corresponding boundary-value."
"Normalize the BEG, END, and BUFFER arguments.
BUFFER must be a buffer or nil, meaning the current buffer.
BEG and END must be integers. They are sorted and truncated to
values
legal in BUFFER so that 1 <= BEG <= END <= \(1+ \(length BUFFER))."
> + (if (null buffer)
> + (setq buffer (current-buffer))
> + (check-argument-type 'bufferp buffer))
> + (when (> beg end)
> + (setq beg (prog1 end (setq end beg))))
> +
> + (setq beg (max beg 1)
> + end (min end (1+ (buffer-size))))
> + t)
I would write these as
(when (< beg 1)
(setq beg 1))
(when (> end (1+ (buffer-size buffer)))
(setq end (1+ (buffer-size buffer))))
I use #'min and #'max is because I find the docstring saying that BEG
and END could be a marker. I don't know if #'< or #'> can handle the
comparation of a marker with a integer, but #'min and #'max announced
they could in their docstring.
And beside this, I find another possiable way of get into error of
"args out of range". If some bad guy or buggy program set both BEG and
END < 1 or > (1+ (buffer-size)), boom!! I will change the code to avoid
this...
suggestions are welcome :P
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
_______________________________________________
XEmacs-Patches mailing list
XEmacs-Patches(a)xemacs.org
http://calypso.tux.org/cgi-bin/mailman/listinfo/xemacs-patches
6225
days inactive
6228
days old
5 comments
2 participants
participants (2)
-
FKtPp -
Stephen J. Turnbull